Search results: nan

Sort order

3,744 models

P
Printablesfifindr

Articulated Banana Buddy

Meet the Articulated Banana Buddy – the ultimate chill companion! 🍌✨ Print with no supports! ✅ 85mm Tall – Perfect for desks, shelves, or office spaces ✅ Articulated Legs – Can dangle its feet off any edge ✅ Wholesome & Hilarious – The…

Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant

Downloads
14,557
Likes
1,953
Rating
4.87
P
Printablesfifindr

Mini Banana Buddy

Meet Mini Banana Buddy , the tiniest and cutest banana companion! 🍌✨ ✅ Adorable & Tiny Design – A fun and playful desk buddy ✅ Perfect for Desks, Shelves & Collectibles – Small but full of personality ✅ Lightweight & Quick Print – Weighs…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
9,864
Likes
1,457
Rating
4.72
P
PrintablesSurfalex2000

Prusa XL series: Antiresonance integrated steel sheet holder (curved) (Update: Added 3 sheet version)

I modified the original and fantastic idea from wolffaayyy here on printables. I modified the sheet mount, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray…

Print approx. €14.42–€17.62 excl. taxPreliminary estimate for one variant

Downloads
1,705
Likes
387
Rating
4.94
P
PrintablesFlyAttack

Nvidia Jetson Nano Case – NanoMesh Mini

NanoMesh Mini is a compact case design for the Jetson Nano Developer Kit. This case be used entirely tool-less, although it can be secured with four case screws. The carrier board is held in place with stand-off pins. To secure the case…

Print approx. €7.27–€8.88 excl. taxPreliminary estimate for one variant

Downloads
849
Likes
39
Rating
5
P
Printablesgiveen

Conan's Atlantean Sword

Clanmate asked me to design this. You will need 6.35mm (0.25in) dowels in many locations to hold it all together, including a big one straight down the center. Over all length is 39inches. I used fandom measurements that the blade was 27…

Print approx. €2.71–€3.31 excl. taxPreliminary estimate for one variant

Downloads
780
Likes
80
Rating
5
P
PrintablesOleksii

KORG nanoKONTROL2 knob

Replacement knob for KORG nanoKONTROL2 Print instructions I recommend to print it in PETG with elephant foot compensation on. Infill 100% prints in about 15 minutes. No supports are needed but you might have to clean up the ceiling inside…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
604
Likes
34
Rating
5

CANOPY - BetaFPV Meteor75 Pro Runcam TBS nano 32 VTX - CANOPY

I designed a canopy to fit a Runcam and TBS nano VTX onto my Meteor75 Pro Frame. It closes with the help of 1-2 Zippies, velcro cable ties or glue or string or anything else. ==> NO ZIP-TIES ON PREVIEW PICTURE!!! The VTX antenna is…

Print approx. €0.91–€1.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
444
Likes
40
Rating
5
P
PrintablesPeter Farell

Burney Relief - Queen of the Night - Ishtar/Inanna

Burney Relief - Queen of the Night Ishtar/Inanna The restored Burney Relief shows color theme of red, white, black, and gold. There’s a naked, fully red-skinned woman, holding a golden loop rod in each hand. Her wings are red, white, and…

Print approx. €8.04–€9.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
429
Likes
54
Rating
5
P
PrintablesFC2M3D

Cute Banana Keychain

Easy to make cute Banana keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant

Downloads
385
Likes
60
Rating
0
P
PrintablesMarkus

Modular enclosure compatible w/ CM4-NANO-B Base Board for Raspberry Pi Compute Module 4

WaveShare makes a really attractive and very compact base board for the Raspberry Pi Compute Module 4 (CM4). Unfortunately, when I bought mine, there were no suitable enclosures available. This model addresses that shortcoming. This is a…

Print approx. €2.19–€2.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
371
Likes
15
Rating
5
P
Printablesdjedje_zr7

Service Key (elevator, maintenance room, electricalbox, fireman ladder)

Service Key (elevator, maintenance room, electrical box, fireman ladder) a key with Insert Bit : Square : 6mm, 7mm, 8mm Rectangle : 6x9 mm Triangle : 9, 11, 14 square (female) : 6, 7, 8

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant

Downloads
334
Likes
61
Rating
4.5
P
Printableslightner

Hoa Hakananai'a (Easter Island Moai Statue)

Hoa Hakananai'a is a moai (Easter Island statue) housed in the British Museum in London. Removed from 'Orongo, Rapa Nui (Easter Island) November 1868 by the crew of the British ship HMS Topaze. Though relatively small at 2.4 meters, it is…

Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant

Downloads
307
Likes
28
Rating
5
P
PrintablesAdrián Vidal

Fernanado Alonso Signature

A 3d printable in one piece model of the F1 driver Fernando Alonso

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant

Downloads
290
Likes
35
Rating
5
P
Printables3D KIMBA

BSPP Pipe Plugs & Testers: Essential Protection for Pipes During Maintenance

BSPP Pipe Plugs: Essential Protection for Pipes During Maintenance Looking for NPT Pipe Plugs? You can find them HERE! Product Description: These BSPP pipe plugs offer a simple yet crucial solution for protecting hydraulic and pneumatic…

Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant

Downloads
283
Likes
93
Rating
5
P
PrintablesNem

Nananananananana - Batman! (fridge magnet)

Simple Batman logo fridge magnet. The wings are tapered so you push on one side or the other to more easily pull the magnet off the fridge. I printed in black PLA, either .2 or .15mm layer height. Best if you print it face down (holes up)…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
259
Likes
64
Rating
5
P
Printableslvisintini

Gameboy Advance maintenance/display stand

This stand comes in handy to repair or mod Gameboy Advance handheld consoles. Repairs usually require taking apart the whole system, which can be challenging to put back together. When placing the device face down on a flat surface, the…

Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant

Downloads
230
Likes
55
Rating
5
P
Printablesvbrantner

Resonance Test Print

🔧 CORE One Resonance Test Print This simple test object helps detect resonance noise on the Prusa CORE One. The sharp corners and long straight paths make it easy to hear and see vibrations or ringing during printing. Print in Vase Mode.…

Print approx. €0.62–€0.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
190
Likes
19
Rating
0
P
PrintablesPard

DENNERLE Nano Cube 10L Lid and supports

Replacement lid with honeycomb pattern for Dennerle NanoCube 10l aquarium. Supports included are not my creation but since original parts become brittle with time and replacement is nowhere to be found, I decided to add them. Creator of…

Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant

Downloads
169
Likes
17
Rating
5

držák kamery chůvičky TRUELIFE NannyCam V24 PRO

Šroub musí být zmenšen v celkovém měřítku na 99% kvuli vůli závitu.

Print approx. €5.98–€7.31 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
1
Rating
0
P
PrintablesDanAndersen

DanAnd's Mount for E3D Revo Micro, Sherpa-Mini, Creality Ender3, CR10 or Sunlu S8. Bowden-Setup and Direct-Extruder possible

Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…

Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
122
Likes
21
Rating
5
P
PrintablesFabian

Ambilight for any pc monitor tutorial (prismatik, arduino nano, ws2812b)

The housing with lid is part of the Ambilight Monitor project. The case was printed with PLA. The following components are also required for the Ambilight: Arduino Nano Power supply 5V 2A ws2812b 88 LEDs (32 Top, 19 Left, 19 Right, 18…

Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant

Downloads
121
Likes
97
Rating
5
P
Printablesingegneredentro

Pineapple Cutter - Peel - Ananas Cutter and Slicer - Sbuccia Ananas

EN Pineapple Cutter - Peel - Ananas Cutter and Slicer with separate threaded handle IT Sbuccia Ananas con manico filettato rimovibile

Print approx. €4.73–€5.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
116
Likes
23
Rating
0
P
PrintablesICMAB - CSIC

Prusa XL: 5 sheet-version of the Antiresonance integrated steel sheet holder

With the release of the PP powder print sheet the XL now has a repertoire of 5 different sheets. For comfort, it's very convenient to have a dedicated storage for each type, especially during calibrations. This remix of the ArISSH can…

Print approx. €14.71–€17.98 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
97
Likes
14
Rating
5
P
PrintablesGerard

4 sheet-version of the Antiresonance integrated steel sheet holder

The XL enclosure marked the arrival of the 4th steel sheet. It felt quite cumbersome to have the 3 slot version full with the remaining 3 and when having to run a calibration, toss the 4th one somewhere in the meantime. Now with this 4…

Print approx. €13.89–€16.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
96
Likes
24
Rating
5
P
PrintablesDieguito

Map3d New York Finance District

One of the most impressive parts of New York. The financial district, if you have visited New York you can see and point out which are the buildings of this part of the city: the big banks, the World Trade Center or the Chrysler Tower.…

Print approx. €15.74–€19.24 excl. taxPreliminary estimate for one variant

Downloads
91
Likes
10
Rating
0
P
Printableshm

Arduino Nano33 TestAdapter

A 3D printed test adapter for connecting the SMD test-pins, especially for the SWD debug-interface, via pogo-pins. The OpenScad source file allows setting the diameters of the holes with the three parameters “shaftdiameter”,…

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
5
Rating
0
P
PrintablesCrypto Pedro

Pregnant Bathing Elf Woman

If you like the things CarlCreates makes, please consider to become his Patreon: https://www.patreon.com/carlcreates

Print approx. €5.06–€6.19 excl. taxPreliminary estimate for one variant

Downloads
76
Likes
7
Rating
0
P
PrintablesFokieH

Stihl - Baumkralle / Krallenanschlag Schutzhülle

Ein Modell einer Schutzhülle für die Baumkralle die ich für meine Stihl MS261 gemacht habe. Passt sicherlich aber auch auf andere Kettensägen Modelle. Die Schutzhülle kann ohne Support gedruckt werden. Die Schutzhülle wird einfach auf die…

Print approx. €2.28–€2.79 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
74
Likes
15
Rating
0
P
PrintablesDsK_Printing

Maintenance - Base (Roborock S8)

For the regular maintenance of my Roborock S8 i needed a simple solution to protect the laser tower while the robot is laying upside down. Technical Data: inner diameter: 90mm angle: 8° height at the lowest point: 22,5mm Print settings:…

Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant

Downloads
74
Likes
10
Rating
5
P

Bananagrams Photo Caddy Insert

This insert is designed to fit Banangrams in the photo caddy. This design along with several others have OpenSCAD files available on my GitHub Made specifically to fit Photo and Craft Keeper 4x6 inch storage bins (made by Simply Tidy and…

Print approx. €4.81–€5.87 excl. taxPreliminary estimate for one variant

Downloads
69
Likes
7
Rating
5
P
PrintablesKj_temmes

Small box for Arduino nano.

One simple box for arduino nano. Easy print.

Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant

Downloads
56
Likes
6
Rating
0
P
PrintablesMoMoGoBot

ELECTRIC EEL WHEEL NANO BOBBIN TO 6.0 SPACER/ADAPTER

EEW Nano bobbins can be used on the EEW 6.0 flyer, but they leave a sizeable gap on the flyer rod. the bobbin can slide to the left at higher speed and drag the break band with it, which will eventually catch on the flyer arm and stop the…

Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
16
Rating
0
P
Printableslvisintini

Gameboy DMG maintenance/display stand

This stand comes in handy to repair or mod Gameboy DMG handheld consoles. Repairs usually require taking apart the whole system, which can be challenging to put back together. When placing the device face down on a flat surface, the…

Print approx. €7.46–€9.12 excl. taxPreliminary estimate for one variant

Downloads
37
Likes
4
Rating
0

Bruker Banane

Verhindert Tür-Fenster-Schlagen im Wind! Verhindert das Panik-Strangulieren von Haustieren, die durch ein gekipptes Fenster in die Wohnung-Haus durchtreten möchten. Läßt sich gut greifen mit den Grifflöchern! Sitzt mit…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant

Downloads
36
Likes
6
Rating
0
P
PrintablesAlvomane

SKYRC MC3000 XT60/banana plug adaptor | XT60-/Bananenstecker-Adapter

This is an XT60/banana plug adapter for chargers with large charging slots (72mm), such as the SKYRC MC3000. Crocodile clips can be connected to the adapter to charge individual rechargeable batteries at their solder lugs without the need…

Print approx. €1.02–€1.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
36
Likes
11
Rating
4
P
PrintablesREMLURELMI

Banana Jack D-Sub Breakout Box

DE-9 (commonly referred to as DB-9) Breakout box to banana jacks. Includes two DE-9 connector holes (intended for in and out), and 9 banana jacks. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: Yes, for…

Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant

Downloads
34
Likes
2
Rating
0
P
PrintablesShane Deiley

Ploopy Nano BTU Mod with ZSA Moonlander Right Thumb Cluster Attachment

I am a very novice CAD user, so the STL has a lot of flaws - not smooth edges, lacking symmetry, etc. I really wanted to mount a trackball to my ZSA Moonlander, particularly for my right thumb. I took a BTU mod of the top part of the…

Print approx. €2.71–€3.31 excl. taxPreliminary estimate for one variant

Downloads
33
Likes
9
Rating
0
P
Printablesmkoistinen

Bit-holder for small Craftsman VERSASTACK Nano Containers

This is an over-engineered solution for a minor problem, but…. I got fed-up with my mish-mash collection of ¼" ratchet sockets and decided to buy a clean set of metric ones and another clean set of SAE ones. When I got home, I noticed…

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant

Downloads
31
Likes
9
Rating
0
P
PrintablesWerner

Resonance Damper MK3S/ Anti Vibration Feet

My printer is on an old, wobbly table. The vibrations of the stepper motors were transmitted throughout the house before my small absorbers were placed underneath. These dampers redirect all vibrations into the upper wall of the…

Print approx. €3.72–€4.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
5
Rating
0
P

System 58: very small boxes "pico" and "nano"; FreeCAD included

These are two very small boxes out of the System 58 collection of sorting boxes. They can be used standalone for small items or they can be used with the smaller inserts to give them even smaller compartments. The sizes are: Nano: outside…

Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
2
Rating
0
P
PrintablesLucianociri

Conector ficha banana para electrónica

Hice el case o carcasa de los típicos conectores banana para reemplazarlo en caso de que se rompan o necesite cambiar su color. Probablemente necesite soportes o balsa para mejorar la adherencia con la cama.

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
0
Rating
0
P

Outin Nano Filter Baskets Carrier

OutIn Nano espresso machine filter baskets unlimited stackable carrier.

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
2
Rating
0
P
Printables4D

Farbwerk nano - RGBpx controller - holder for original Prusa Enclosure

This LED controller can power up to 90 LEDs, powered by USB and with a current of up to 2 A. I use 45 LEDs. I already had this controller at home and wanted to use it. It shines great and looks very decent on the original Prusa Enclosure.…

Print approx. €1.66–€2.03 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15
Likes
3
Rating
0
P
PrintablesJonathan Kayne

Greyscale Ferdinand [Ascendance of a Bookworm]

Drawing of Ferdinand made by user ALOS . Made using HueForge. Print Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Swap Instructions: Black until layer #10 at 0.92mm Dark Gray until layer #19…

Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
0
Rating
0
P
PrintablesJonathan Kayne

Greyscale Ferdinand from Ascendance of a Bookworm

Drawing of Ferdinand from Ascendance of a Bookworm. Image was drawn by the novel illustrator, You Shiina. Made using HueForge Print Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Swap…

Print approx. €8.04–€9.83 excl. taxPreliminary estimate for one variant

Downloads
10
Likes
2
Rating
0
P
Printablesjvazac

Vodnany square - Vodňanské náměstí

3D model generated from map data

Print approx. €2.17–€2.66 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
1
Rating
0
P
PrintablesNRD31

Adaptation pour médaillon d'appel soignant

Voici une adaptation pour permettre à une personne en situation de handicap, qui n'a pas la capacité d'appuyer sur le bouton du médaillon, d'agir et d'appeler le soignant. Le support comprend une partie ajoutée qui simplifie l'appui…

Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant

Downloads
4
Likes
0
Rating
0
P

Print-in-place Hopf link (catenane)

I wanted to design a print-in-place catenane that requires no support so here it is! Prints well in PETG. I am sure there is a way for making this via injection molding, but I think it’s a cool print that leverages the strengths of FFM.…

Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3
Likes
0
Rating
0
P
Printablesjeff

The Banana-Chess Pawn: Pawnana

Made this using Tinkercad and Prusa Slicer. I want to say thank you to sir miss_alot.

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3
Likes
0
Rating
0
P
PrintablesPolymorphic

Build Tray — Modular Organizer for Assembly, Disassembly and Maintenance

Build Tray is a modular organization system designed for makers, tinkerers, technicians, repair enthusiasts and anyone who needs to keep small parts under control while working on a project. It was created to help organize components…

Downloads
29,115
Likes
9,791
Rating
4.84
P
PrintablesSteeveeet

*NANO* All In One 3D printer test

Just when you thought that every possible way of calibrating your printer had been created, an entirely novel and unique method arrives! This isn't it, though. This claims to be neither novel nor unique, and is instead a cover version of…

Downloads
22,663
Likes
2,333
Rating
4.96
P
PrintablesMartin

Rocinante from the Expanse

This is my Rocinante model which is supposed to represent the Rocinante ship as it featured in the very last episode of the season 6 of the show Expanse. It has CSL plating, railgun, PDCs and torpedo tubes. The model is 50cm long and has…

Downloads
14,688
Likes
3,731
Rating
4.92
P
PrintablesPrinty Ponky

Banana Katana Remix with Display Stand

This remix of the original Banana Katana introduces significant improvements for enhanced functionality and stability. The original Banana Katana model features a banana that unfolds into a long sword. In this remix, the model has been…

Downloads
8,836
Likes
1,925
Rating
4.53
P
PrintablesPRIma

Nano Vise V2 by PRIma

Update 2023 : New designed parts available! Clamping range now 25mm and includes V-groove New grippy slider Check the file names starting with 2023 NANO VISE… The new basic version (no desk clamp) you can find here:…

Downloads
7,022
Likes
3,108
Rating
4.86
P
PrintablesHarrison

NVIDIA Jetson Orin Nano Developer's Kit Case

Simple case for an NVIDIA Jetson Orin Nano Developer's Kit. All ports are exposed. There are four versions of the main case: Orin_nano_case_main has holes for accessing the terminal block of the recommended CAN bus ( Waveshare SN65HVD230…

Downloads
6,982
Likes
174
Rating
4.95
P
PrintablesEon3D

Chibi Banana – Sweet, Simple and fast 22min

Chibi Banana is a compact and charming print, perfect for adding a cheerful touch to any desk or shelf. Its smooth, rounded shape and expressive face make it a satisfying and easy project for any 3D printing fan. Chibi Banana is available…

Downloads
5,984
Likes
904
Rating
4.86
P
PrintablesDIY Machines

GeoLeaf - 3D Print your own Nanoleaf project - Alexa, Hue and App integration

If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to build a very smart and low cost geometric lighting system. Meet Geoleaf, my low cost and 3D printable version of Nanoleaf lighting…

Downloads
5,013
Likes
4,383
Rating
5

Ananas Vase

This was printed at .2mm with 3 walls, no infill, and no top layers.

Downloads
4,845
Likes
1,114
Rating
4.94
P
Printablesrmfms

nanodidg

This model is not my original creation , kudos to the original author Dan Sayers who gave me permission to upload this awesome parametric model created in OpenSCAD . nanodidg is a compact 3D printed musical instrument inspired by the…

Downloads
4,738
Likes
389
Rating
5
P
PrintablesBeaver

Banana Stand

A stand that holds a hand of bananas

Downloads
4,350
Likes
809
Rating
4.88
P
PrintablesJakob Kerber

Arduino Nano

I created this model as a reference model when designing enclosures for electronics containing the Arduino Nano. I made It precise enough to be used in renderings

Downloads
4,006
Likes
80
Rating
5
P
PrintablesKeep Making

Flexy Banana

A silly little print of a Flexible Banana. It's a great fidget toy. No need for support while printing. Prints in PLA with no problems, but I assume PETG should give the banana even more flex. Be aware that you need to have a pretty…

Downloads
3,461
Likes
218
Rating
4.92
P
PrintablesPrinterPatrick

Chimpanzini Bananini

Chimpanzini Bananini! wa wa wa! Bananuchi monkey monkey monkey uchi! or Chimpanzini Cocosini? wa wa wa! po po batabim. Coconuchi monkey monkey monkey yuchi! or Chimpanzini Ananasini? wa wa wa!

Downloads
3,027
Likes
122
Rating
4.67
P
PrintablesDIY Machines

How to build a Giant Hidden Shelf Edge Clock - 3D Printable | Elegoo Arduino Nano | Smart Home | LED

If you like this project please do press the like button above. It really helps me out. Thank you. 😊 I'll show you how to build a very smart looking shelving system that includes a hidden giant clock in the edges of the shelves, and…

Downloads
3,009
Likes
833
Rating
4.88
P
Printableswbronner

Louis Vuitton Nano bag for Flowers - bigger space - better to print

Drain Hole removed, negative volume body improved for easier printing. large overhangs reduced inside the bag. Printed with PETG prusament with 5 % giroid infill and 3 outer walls.

Downloads
2,974
Likes
281
Rating
5
P
PrintablesJohn Doe

Little banana sword katana knife

For little makers. Need some magnets and glue. Second thx soap warrior! Category: Toys & Games

Downloads
2,895
Likes
325
Rating
4.82
P
Printablesvermotr

Nano SIM card adapter

Simple adapter to convert a nano SIM card into a standard SIM card. Changelog V1.0 (2023-04-03): First version

Downloads
2,827
Likes
91
Rating
5
P
PrintablesWilko

Banana 01

I've started to mess around with Blender. I watched a lot of videos and then tried to recreate one from memory.This banana is based on a video by CG Geek and... man... he's fast in the video. I still rendered with Fusion 360 because...…

Downloads
2,805
Likes
84
Rating
4.83
P
Printableslopsidedflan

Banana Katana Remix — thicker blade + connecting block

Modified blade to be thicker With the original blade model, the blade pieces kept breaking whenever I swish-flicked it open because of how thin the walls were, both in PLA and PETG. So I increased the width of the walls of the blade…

Downloads
2,769
Likes
276
Rating
4.56
P
PrintablesCollecti Craft

Celestial Resonance Meditation Sculpture in MidAir

Description A suspended human figure designed to express stillness and quiet balance. The form is reduced to clean lines and a gentle meditation pose, creating the illusion of floating in mid-air. It works as a contemplative object, a…

Downloads
2,398
Likes
527
Rating
5
P
PrintablesTriodes

Ender 3 V2 Maintenance stands

These are 2 simple stands that snap onto the 20mm and 40mm profiles on your ender 3 V2 printer. Might work on other similar models as well. Simply print 2 of the wide models and 1 of the narrow, remove the display and snap the stands on…

Downloads
2,299
Likes
652
Rating
4.95
P
Printablesfaultedlogic

Banana

A banana from my wife's fruit bowl. I don't know that it will be useful to anyone. While it's of no use to me, I did decide to print it to see how the result would compare to the original banana. I'm reasonably pleased with the result.…

Downloads
2,130
Likes
132
Rating
4.94
P
PrintablesBODY3D

Mr Banana

Support me on Patreon Follow me on Category: Other

Downloads
2,088
Likes
208
Rating
4.92
P
Printablespawel50

Nano SIM to Micro SIM adapter

Tested on 3 different cards and 3 different phones. Note: The thinnest part has 0.8mm, consider this to adjust nozzle and line width.

Downloads
1,976
Likes
42
Rating
5
P
PrintablesAmuseables

Fortnite Banana

If you're an adult and have played Fortnite you have most likely been shot by a better, younger, child and are down. You are calling for help from your teammate (your 10 year old cousin) who made you play with them. Celebrate your cousins…

Downloads
1,943
Likes
314
Rating
4.82
P
PrintablesLMaker

Anycubic Kobra S1 / S1C - Tool head cover maintenance

Anycubic Kobra S1 / S1C - Tool head cover maintenance Essential design for maintenance your S1 and S1C. The model is designed to hold the front cover of toolhead for nozzle changes, hotend maintenance... without having to connect and…

Downloads
1,928
Likes
274
Rating
5
P
PrintablesPRIma

Nano Chuck by PRIma

3 Jaw Chuck modified for the Desk Clamp Version of my Nano Vise V2 https://www.printables.com/model/155120-nano-vise-v2-by-prima (get the desk clamp parts from this link above) easily swap between Vise or Chuck for your work! suitable to…

Downloads
1,914
Likes
626
Rating
4.77
P
PrintablesEl Manu

Arduino Nano slim case

I wanted a slim case for my Geekcreit® ATmega328P Nano V3 (a copy of the Arduino Nano board you can find on Banggood). I also wanted a case for situations without pins, but an output cable directly soldered on the board : I did this one.…

Downloads
1,892
Likes
199
Rating
5
P
PrintablesSevro

Banana for scale

Overview Banana that you can use to show scale of other objects. Print Model on photos printed with 0,4 mm nozzle, 0,3 layer height. Print it on it side with support Update v 1.1 Rounded tip Have fun

Downloads
1,871
Likes
706
Rating
4.91
P
Printablesistevene

Arduino nano mount

simple mount for a arduino nano. use 1 or 2 m3 screws to lock the arduino in place

Downloads
1,794
Likes
230
Rating
4.73

Dodecananas Vase

I printed this with no top layers, 4 bottom layers, with 3 walls and .2mm layer height.

Downloads
1,764
Likes
429
Rating
5
P
PrintablesKarel Bílek

Outin Nano stand

Folding stand for Outin Nano. Skládací stojan pro Outin Nano.

Downloads
1,696
Likes
102
Rating
5
P
PrintablesBarrtyG

Arduino NANO case

Distinctive features are: adherence to clearances for easy installation, compatibility with USB micro and type c, pin markings on the underside, retention of button function, and the ability to view pin signatures from the top, maximizing…

Downloads
1,681
Likes
238
Rating
5
P
PrintablesHP Robots Otto

Otto Ninja robot Arduino Nano design

⚠WARNING⚠ This previous design of Otto Ninja was publish because the community requested . This design is old compared to the new Otto Ninja Starter robot , some functionalities might not work properly or it will be difficult to assemble,…

Downloads
1,644
Likes
58
Rating
0
P
PrintablesGno

Arduino Nano - F3D, STL, OBJ, 3MF Formats

Arduino Nano - F3D, STL, OBJ Formats Description Introducing my meticulously crafted 3D model of the Arduino Nano, designed with precision and a splash of color. This model aims to assist those who are looking to create custom enclosures…

Downloads
1,622
Likes
25
Rating
0

Arduino Nano Case

Arduino Nano case is a protective enclosure that is designed to fit and protect an Arduino Nano board. Arduino Nano is a small, breadboard-friendly development board based on the ATmega328 microcontroller. The 3D printed case can protect…

Downloads
1,618
Likes
79
Rating
5
P
PrintablesTAJ FUN

Stand Controller Fortnite Banana

Stojak na kontroler fortnite

Downloads
1,617
Likes
119
Rating
4.88
P
PrintablesPeter

Nano SIM Card Travel Case [Remix]

WHY? I travel a lot and often buy local SIM cards . Since I tend to lose them, I needed a simple and robust case to organise and carry them. It stores up to seven nano SIM cards and an opening needle . UPDATE v2 Based on your feedback, I…

Downloads
1,614
Likes
190
Rating
4.5
P
PrintablesenragedByte

Lube Applicator Tool V2 | ELEGOO Routine Maintenance Tool

Revised to allow printing without overhang and minor geometry changes.

Downloads
1,521
Likes
89
Rating
4.93
P
PrintablesPotatoMaster64

All-in-1 Lead Screw Maintenance Tool

This tool can be used to clean and lubricate the lead screws found in the P1 and X1 series printers. Before cleaning, you should remove the build plate incase grease and residue come into contact with it To clean the lead screw: Home your…

Downloads
1,480
Likes
418
Rating
5
P
PrintablesHD_Creator

Arduino Nano holder

I really like the Arduino Nano, because it is small and cheap. Still it is typically well capable to play the role of a central or supporting microprocessor in homemade devices. The only problem is that is has no mounting holes. So how do…

Downloads
1,451
Likes
151
Rating
4.67
P
Printablesnilson_fx

Banana Fidget Karambit

Banana Training Karambit. Print with a good amount of infill for a nice momentum. Have fun printing.

Downloads
1,369
Likes
99
Rating
5
P
PrintablesPeter H

NANO SIM CARD CASE

I have two sets of sim cards - one for each side of the world, and this simple case keeps them relatively secure in my passport wallet. It's about half the size of a credit card, big enough to avoid being misplaced, small enough to take…

Downloads
1,365
Likes
160
Rating
4.85
P
Printablesscarrson

NanoVNA-H4 Rugged Box

A box for your NanoVNA-H4. Includes room at the SMA connectors for you to leave your adapters on the VNA if you like (I have BNC adapters on mine). Fits the SMA calibration standards and has lots of storage room under the NanoVNA and in…

Downloads
1,363
Likes
160
Rating
4.82
P
Printablesmsystems

Core & Tray for 1.2L ASRock a300 and x300 case (DeskNano x300 compatible)

The 1.2L Replacement case for DeskMini x300. Basic “slots” styled core that's compatible with the whole DeskNano x300 system. This core fits most coolers, but doesn't fit Wraith Stealth. See if you can print this first, since the other…

Downloads
1,297
Likes
51
Rating
5
P
PrintablesSunbertyv

Cute Banana

I recommend supports , for both arms, I use Cura and have used them normal and everywhere remember to public the make to get the prusa points… happy printing.

Downloads
1,285
Likes
284
Rating
4.75
P
Printablesdmacnulty

Folding Under Kitchen Cabinet Fruit Hook (e.g., bananas)

Use Case : needed a durable hook which could hang produce from our kitchen cabinets and also fold out of the way when not in use. I wanted a hook which could hold heaavy bananas or tomatoes without fear of breaking. Components: Hook –…

Downloads
1,241
Likes
534
Rating
5
P
PrintablesBaran Tunc

Jetson Orin Nano Case

Jetson Orin Nano case I made for myself. Bottom part has 2 versions for one with PCI slot screw holes and the other is without them. Feel free to delete the mark "gears.com.tr" if you wish. For extra tidiness I punch 2 small holes with…

Downloads
1,211
Likes
36
Rating
4
P
PrintablesDavid Martinek

Ubiquiti Unifi AP stand (All in 1, NO SCREWS needed!) - Updated: LR / Pro / Nano / Lite

UPDATE 20.1.2024 - added versions - AP: LR / Pro / Nano / Lite Complete stand + mounting bracket for Ubiquiti Unifi AP. The model is All in one, so it can be printed as one piece without need for screws. You just click it on. In the 3mf…

Downloads
1,206
Likes
92
Rating
5
P
PrintablesEastman

Conan the Barbarian Bust (STL)

✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) CONAN THE BARBARIAN! This isn't your Arnold Schwarzenegger Conan the Barbarian, it's more like your Frank Frazetta Conan the Barbarian,…

Downloads
1,202
Likes
255
Rating
4.94