Search results: opti

Sort order

4,244 models

P
PrintablesThreeD-Michael

Optimized Bed Scraper XL

News 2024-04-10: Please also check out my new Blade Dispenser for this Bed Scraper: This is the XL version of my popular Optimized Bed Scraper with quick-change blades. The cutting edge of the blade is 45 mm, a full 30% longer! Each blade…

Downloads
79,464
Likes
16,334
Rating
4.88
P
PrintablesSneaks

Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options

Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…

Downloads
22,705
Likes
5,392
Rating
4.92
P
Printablessh

🚉 SET: Lego DUPLO train tracks (optimized)

UPDATE 25.2.2022: check out my lego duplo BRIDGE ! https://www.prusaprinters.org/prints/137837-set-lego-duplo-train-bridges-optimized UPDATE 11.2.2022: added 0.3mm layer height gcode files for all tracks → faster prints , still looking…

Downloads
10,486
Likes
1,171
Rating
4.9
P
PrintablesMichaël Fortin

Cheshire Collimation Eyepiece for Reflector Telescopes (1.25 in, Optional Crosshairs)

A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…

Downloads
2,420
Likes
179
Rating
4.98
P
PrintablesmisterT

MasterSpool - DAS FILAMENT Edition V3 - Optimized Print

Important Update 2025/2026 Das Filament changed from 800 g to 1 kg. The old Masterspool is no longer compatibel with the 1kg spools. The NEW Das Filament1 kg Masterspool:…

Downloads
1,444
Likes
135
Rating
4.88
P
PrintablesY Ibrahim

Print-in-place Rotary Fidget Detent Knob with detent strength options

This fidget clicker is a neat little gadget showcasing the power of print-in-place mechanisms. Choose between three detent strength options. Simply print the desired model, break it free from the bed and with minimal cleaning up, its…

Downloads
948
Likes
67
Rating
4.67
P
PrintablesPRINTER

Table vise - 100% printable - no support - optimized orientation

Table vise - 100% printable - no support - optimized orientation Rock solid: this optimized 3D-printed vise effortlessly withstands a 1 kg load thanks to its high-strength design. Create your own using the included STEP files. Dimensions:…

Downloads
870
Likes
388
Rating
5
P
PrintablesSMACKMAX_

Optic/Sight for Nerf blaster

Attention Nerf enthusiasts! Are you looking to take your Nerf blaster game to the next level? Boost your accuracy and aim with the 3D Printable Sight/Optic for Nerf Blasters . This sleek and functional accessory is designed to help you…

Downloads
857
Likes
133
Rating
4.75
P
PrintablesAlexMu

Fan duct optimised

NEW VERSION https://www.prusaprinters.org/prints/48024-fan-duct-optimised-for-anycubic-i3-mega Its getting more and more important to do fast prints. So this CFD flow optimized duct helps. As well you get much better bridges if you have a…

Downloads
677
Likes
62
Rating
0
P
PrintablesPeter Farell

Optimus Prime

Optimus Prime from the Transformers.

Downloads
651
Likes
103
Rating
0
P
Printablesstritti

Cupra Born - Charging Tray Optimized

Based on the idea I found in a German forum, I have created an optimized version of the Qi charging tray for the CUPRA Born. If you are receiving messages that your smartphone cannot be charged by the charging cradle of your Born, this…

Downloads
585
Likes
21
Rating
5
P
PrintablesPatpatrouille
18+

The source marked this model as adult content.

Downloads
561
Likes
232
Rating
5
P
PrintablesCoenW

Porche 911 from glenjohnston on thingiverse: split and optimized

Optimized version of https://www.thingiverse.com/thing:39105 Different parts split in different bodies Bottom of car body flattened Rescaled, and multi-layer height optmization in the print files. Copyright 2014 GlenJohnston

Downloads
357
Likes
17
Rating
5
P
PrintablesMrRogers

Bookbinding Coptic Signature Punching Tool Guide Jig

Designed for Coptic stitch bookbinding technique Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on center of each 0.13" (3.3mm) hole. Markings are recessed…

Downloads
329
Likes
68
Rating
0
P
Printablesthiebes

Bench mountable cable clip for optical table with M6 or 1/4-20 screws

I made this cable clip for an optical bench. The bottom is thick to hold it flush to the table, and the top is thinner to offer some flexibility in clipping the cables. It mounts to the table with one hex socket head screw. The screw can…

Downloads
308
Likes
33
Rating
4.8
P
PrintablesEge Hosgungor

Phantom of the Opera Mask (optimized for comfort)

I optimized the OG mask to fit my own face with small modifications mostly on the forehead and the eye.

Downloads
305
Likes
46
Rating
4.86
P
PrintablesDaHouzKat

PRUSA MINI/MK3 Gyroscope and/or Optical Illusion

This remix includes both the gyroscope and the optical illusion You can print and use them separately or mix and match them to use together The connectors are made for the MINI but i added an adaptor for the MK3 No magnets required Print…

Downloads
277
Likes
118
Rating
5
P
Printablesarmer_geddon

VESA 100x100 Adapter MSI Optix MAG341CQ

Sturdy VESA 100x100 Adapter to enable wall- or tablemounting for the MSI Optix MAG341CQ (German/ European Version, so check your monitors interface before printing, MSI seems to have at least one other version distributed in North…

Downloads
271
Likes
10
Rating
0
P
PrintablesNemo404

Optical drive linear actuator V2 - with integrated limit switches

// Here you can find my new project which also use parts from optical drive https://www.thingiverse.com/thing:5201443 This is upgrade of my previous version I posted here.I also added second actuator without external shaft.These models…

Downloads
260
Likes
94
Rating
4.5
P
Printablesperoteq

Optimized Prusa Mini MINDA holder for stress relief

This optimized Prusa Mini MINDA-holder manages the heater cables more loosely in the space between the minda holder part and cooling fan. Even without the second screw in place, the part doesn't bend outwards like the original minda…

Downloads
260
Likes
26
Rating
5
P

iPlug by KMS (two options)

You are on the road and have a snoring bed neighbor who cuts down half the forest again? Then the iPlugs are just right for you. Because you need a good and cheap noise protection. With the case you can transport your earplugs safely and…

Downloads
257
Likes
53
Rating
5
P
PrintablesChris D

Dovetail Gridfinity Base - Multiple Dovetail Options

Dovetail Gridfinity Base - Multiple Dovetail Options

Downloads
255
Likes
38
Rating
5
P
PrintablesMigueppc

Optimized Push Up Bar

Fitness accessory engineered using FEM analysis and topological optimization techniques. This design combines structural integrity with lightweight construction, resulting in a sleek and organic form that maximizes performance and…

Downloads
238
Likes
45
Rating
5
P
PrintablesDaHouzKat

Gyroscope and/or Optical illusion for x-axis

This remix includes both the gyroscope and the optical illusion. You can print and use them separately or mix and match them to use together The x-axis connectors are made for the Prusa Mini+ but should be compatible with the Prusa MK3.…

Downloads
236
Likes
51
Rating
5
P
PrintablesGfölliBär

Untitled Goose Game - Peace was never an option

Untitled Goose Game shield Printer: Mk3s with MMU3 Filament: Extrudr Layrs High: 0.15mm Supports: No For the G-code: 1= Black 2= Withe 3= Orange 4= Sliver 5= Brown Happy Printing :)

Downloads
229
Likes
75
Rating
5
P
PrintablesMarwan F

Topographic map - Lebanon (optimized)

Border fixed manually, point by point. Total surface 10500 Km2 → 99% accurate. Z exaggerated x3.

Downloads
226
Likes
10
Rating
0
P
PrintablesMigueppc

Gift Box: Cylindrical Design with Threaded Lid and Decorative Options

Presenting our 3D printed gift box—a stunning cylindrical design with a finely textured surface displaying a tasteful classical mechanical motif. Crafted with chamfered edges for a refined finish, this box features a threaded lid,…

Downloads
200
Likes
34
Rating
4.5
P
PrintablesMaxT

Snow Globe - Santa Sleigh, with an optional custom display stand for freestanding use (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…

Downloads
186
Likes
33
Rating
5
P
PrintablesMichal Pešek

Dell Optiflex SFF bracket

Designed for Dell optiplex 7060 SFF with 8.gen intel processor (2018). Left and right side mount version. Safe lock protect before overturn. Designed for M5 countersunk head screw. I made it from PETG. 3 perimeters, 30prc infill.

Downloads
155
Likes
40
Rating
0
P
PrintablesScared__Bunny

Easter Bunny Headband with Insert options!

A Headband for Easter-Time. Different Versions are available: Version 1: Easterbunny-Headband without Inlays: If You want the same Inlay Effect as with the inlay Version: Print Settings: 4 Perimeters No Bottom Layers No Top Layers Take an…

Downloads
149
Likes
37
Rating
5
P
Printablesfiretech

Trust Trino HD Webcam Case with Adjustable Focus (and multiple mounting options)

This case allows you to (manually) adjust the focus of a Trust Trino HD webcam (available for ~€10 on Amazon ) and mount it on a flat surface, rotatable in one or two axes (tilt or pan and tilt). With this case, the webcam becomes quite…

Downloads
138
Likes
18
Rating
5
P
PrintablesOuwekaas

Yaesu FTX-1 Optima cover

This is a remix; the original doesn’t fit properly when the FTX-1 is mounted on an Optima PA unit. I also removed the elastic band tabs on the side, since they interfere when the unit is placed on its side. Printed with a 0.6 mm nozzle…

Downloads
130
Likes
9
Rating
2
P
PrintablesTyson

Optitrack M4 marker base

A printable base for Optitrack's M4 spherical reflective markers. Print in PLA or ABS at 100% infill, with detailed layer height (0.1mm)

Downloads
120
Likes
1
Rating
0
P
PrintablesKageve

Mk4 Nextruder Hotend Assembly Box (MMM option avalible)

A simple two-piece box that stores a full Mk4 Nextruder hot-end assembly (Heater, Thermistor, Heaterblock, Mk4 Nozzle or v6 adapter+v6 nozzle) as well as one to three v6 nozzles. It has a few small features on both short ends to allow it…

Downloads
119
Likes
26
Rating
4.67
P
PrintablesAlex_P

Indexing / dividing plate (Teilscheibe) for lathe Paulimot PM190-V or Optimum D180x300

The main part is the dividing plate fitting to the main spindle nut with: 0°, 90°, 180°, 270° indexes 1°, 5°, 15° marks and holes for fixing in 7,5° intervals Best it is printed with a color change after the first 0.5mm for good contrast…

Downloads
114
Likes
15
Rating
0
P
Printablesc-arts-modelle

Tutorial: Creating wings optimized for single perimeter printing

Creating wings in FreeCad and PrusaSlicer, optimized for single perimeter printing. I made some video tutorials, how I create my RC-airplane wings. I do the CAD-part in FreeCad, a free, opensource CAD software. The gluing surfaces are…

Downloads
108
Likes
18
Rating
0
P
PrintablesUkrutony

Low poly Cautious bunny - print optimized

Yes - believe it or not, Stanford bunny had a brother! Few years back when Printables was not a thing I was browsing Thingiverse for yet another model of low-poly bunny, because my GF thought that Stanford felt lonely. And what I fould…

Downloads
87
Likes
4
Rating
5
P
PrintablesPirateSands2

Topology Optimised Doorstop

A doorstop topology optimised for force on the top and back surfaces. Printing Should print with fairly standard settings. I recommend printing upside-down so that the sloped top surface will end up being flat rather than stepped (see the…

Downloads
78
Likes
12
Rating
0
P
PrintablesDentalCow

Thumbs Up Emoji Stamp (with optional handle/knob)

Adapted from sensa.co emoji library. Build Instructions: Print file/s Glue on handle with hot glue or epoxy (Optional) Enjoy/receive an infinite amount of love from anyone who receives the gift of this stamp's imprint Get called a “cringe…

Downloads
75
Likes
6
Rating
0
P
PrintablesUkrutony

Low poly Stanford bunny - refined, print optimized

I bet that all of you have already come in touch with famous Stanford bunny. Actually, for me, its low-poly version was the first print that I ever made back in a day in the university on an overpriced Makerbot machine that was just shit.…

Downloads
65
Likes
7
Rating
5
P
Printablesswablab e.V.

osVAC M32-R50-54 (osVAC Neo) - wall mount option

Thanks for Hobbyhimmel for inventing this system: https://www.ossso.de/osvac/

Downloads
64
Likes
11
Rating
0
P
PrintablesFC2M3D

Side Cap and Spring for CIFIAL OPTIMA Toilet

I made a replica of the cap and spring to close the 2 side holes of CIFIAL's OPTIMA toilet I made in PETG Cap Infill: 15% Layer Height: 0.2mm Supports: Yes, everywhere and snug Spring Infill: 100% Layer Height: 0.2mm Supports: Yes,…

Downloads
58
Likes
10
Rating
0
P
PrintablesRo3Deee

Optimised Prusa XL side filament bypass - PC4-M6 Pneumatic Connector

To hold the filament you can use the provided rod or an M3 bolt (≥10mm) Also checkout the model with UM2 Quick PTFE Pipe Coupling Collet https://www.printables.com/model/1133522-optimised-prusa-xl-side-filament-bypass-um2-quick

Downloads
52
Likes
10
Rating
5
P
PrintablesAlex_P

Lathe Die Holder for 22mm tail spindle (e.g. for Paulimot PM190-V or Optimum D180x300)

Die holder for lathe tail spindle with 22mm diameter and dies with 25mm diameter.

Downloads
48
Likes
10
Rating
0
P
PrintablesDerKuchenmann

Cable tower modification for fiber optic cable outdoor (THW Lattenschere)

7x threaded inserts M3 2x threaded inserts M6 7x M3x8 DIN 7991 2x M6x16 DIN 933

Downloads
46
Likes
15
Rating
5
P
PrintablesParsingphase

Replacement knobs for Andersen window openers - Now with robust bolt option

When we purchased our home, we found that about half of the window winders, while functional, were missing their end-handles. These small, quick-printing parts serve as an easy functional and aesthetic replacement - not identical to the…

Downloads
45
Likes
2
Rating
0
P

Verizon Cable Clip Cable Hanger for Fence for FIOS Fiber Optic Cables

This is a clip to attach a cable to a fence. Nail a normal nail into the fence, place the cable in this clip, and then hang it on the nail. If you want this already printed and mailed it is available to purchase here. I am the only one…

Downloads
45
Likes
7
Rating
0
P
PrintablesSpool Designs

Bowling Lane Business Card Holder | Banner | Top Storage | Optional Front Website Plaque

Bowling Lane Business Card Holder With Optional Website Plaque Sleek design slides and holds together without glue (though glue is recommended) You will be able to add a custom text to the front plaque when PrusaSlicer 2.6 comes out…

Downloads
40
Likes
20
Rating
0
P
PrintablesDeluxeBabble

Sliding Cover for Spigen Optik Armor (Samsung Galaxy S23)

Since I didn't want to open the cover every time I wanted to use the flashlight, I constructed a compatible sliding cover. To avoid accumulation of dust, however, I did not want a hole at the location of the flashlight. The flashlight is…

Downloads
40
Likes
13
Rating
0
P
PrintablesIgnacio Gabriel

Rear or satellite speaker mounts for back of bed, with optimal angular positioning

Rear or Satellite Speaker Mounts with Optimal Angle Positioning Technical Design for Surround Sound Systems This advanced design offers a practical and efficient solution for mounting rear or satellite speakers in surround sound…

Downloads
32
Likes
5
Rating
0
P
PrintablesMartin

Optimized master spool and Label Material & Colour

1kg Master spool refill coils Filament coils with the dimensions: 2x Inner hole 90mm 3x Width 56mm 3x Width 58mm Spool diameter 200mm Easy install Label Material: ABS, PLA, PLA+ & PETG Label Colour: Blue, Black, White, Green, Red, Silver,…

Downloads
29
Likes
11
Rating
0
P
Printables4D

Adjusted clip for Hypnotic Extruder Visualizer - Kinetic Art - Optical Illusion - Mandala

Slightly improved, better holding clip on the extruder motor. I added small tabs for more grip on the extruder motor. In my case, the original clip was not stable and during the crazy movement of the extruder, it was sliding off the…

Downloads
25
Likes
4
Rating
0
P
PrintablesCaspar Armster

JetKVM 1U Rackmount with connection to a Ubiquiti UCG-Ultra/etc. Rackmount Option

JetKVM 1U Rackmount with connection to a Ubiquiti UCG-Ultra/etc. Rackmount Option which i used before and be able to replace my empty right side. There are more options out there to combine it to. Use 2 M3 inserts and 2 M3 screws to…

Downloads
22
Likes
4
Rating
0
P
PrintablesTi

Opticron BGA 8x42 Lens Cap

This is an eyepiece lens cap for an Opticron 8x42 BGA monocular. The rubber cap supplied with this monocular is very easy to knock off or misplace as it sticks out from the body of the monocular and has no retention mechanism; this print…

Downloads
21
Likes
1
Rating
0
P
Printablesaddohm

Lack table absorbing feet with optional rubberized pads

Remix to be able to adjust the height as well as add some shock absorption and grip. Note: Pay attention to how you orientate the TPU feet if you decide to use them, they should be flush on all sides and only go on one way. REMIX Credits:…

Downloads
20
Likes
4
Rating
0
P
PrintablesLuis

Optimized fencing epee tester

This design was heavily influenced by the fencing weapon tester by Yafra7, but I wanted to implement some changes to make it easier to print, hold the components in place securely and to fit the components available to me. the electronics…

Downloads
18
Likes
2
Rating
0
P
PrintablesPeopleware

Deckel für Aufbewahrungsbox mit Optionaler Ladefunktion für Original Apple Watch MAG Ladekabel

Die Beschreibung dieses Deckel Set richtet sich vor allem an diejenigen, die das u.a. bei Amazon erhältliche “ Brandsseller Aufbewahrungsbox Dekobox - Rattan-Optik - 3er-Set schwarz” (Link: https://amzn.to/3VxbGMG ) bereits besitzen. Ich…

Downloads
17
Likes
4
Rating
0
P
Printablesweissi

Scaleable 3D Printing optimized building blocks

Building Brick STL Generator Parametric generator optimized for FDM 3D printing (compatible with common bricks). Recommended PETG Settings For fast results with PETG, use these PrusaSlicer settings: Setting Value Profile 0.2mm SPEED…

Downloads
15
Likes
0
Rating
0
P
Printablesmartin85

Gear to be used on electric train, optimized for MK4S, sharp teeth, strong

I tried to use https://www.printables.com/model/537121-replacement-gear-for-playtive-electric-trains but this did not work for my application, printing also did not print teeth sharp enough on my MK4S with ASA. So this is new wheel made…

Downloads
14
Likes
2
Rating
0
P
PrintablesRafaelAlves14

Optical Fiber Suport

This model was made for a Plasmonics Internship, where I had to secure the optical fiber. It has a special end to it from another equipment, which I do not record (probably a spectrometer). This model was, in part, inspired by the "…

Downloads
7
Likes
4
Rating
0
P
PrintablesOBA

Optical Blinding for Impedance-Switch-Cutout of Orbid Sound Mini Galaxy

Motivation Technically speaking, this part is not requred, but I did't like the open cutout in the MDF backwall for the impedance switch. Therefore I designed and printed a blinding part that matches the speaker cable outlet. Printing…

Downloads
5
Likes
0
Rating
0

Optická iluze válce

Studenti dle návodu vytvoří v programu TincerCAD model a následně vytisknou.

Downloads
3
Likes
0
Rating
0
P
PrintablesMikolas Zuza

Self-watering rectangular planter (with optional labels)

The siphons are printed separately and then simply pushed into place. I did it this way to avoid using supports. Water level indicator The floating water level indicator is a bit tricky. Print the indicator (1 perimeter, no infill),…

Downloads
29,283
Likes
7,056
Rating
4.82

Collapsible Basket (optimized)

Collapsible Basket Optimized for 3D printing This basket prints in place as one part and doesn’t require any supports. It prints flat but folds it into a basket! This is a remix of the first collapsing basket I designed, that version uses…

Downloads
23,410
Likes
5,205
Rating
4.88
P
Printables3D_Workspace

Silica-Gel-box (spool-container, optimized for super fast print)

These boxes are specially designed to be printed really fast and also to have as many holes as possible to let the wet air reach the silica-gel inside. The screw cap is an easy and durable way to close the box and also open it again to…

Downloads
20,784
Likes
5,003
Rating
4.85
P
PrintablesThreeD-Michael

Optimized Bed Scraper

News 2024-04-04: Upon request, I designed an XL version of this scraper with 30% longer blades: News 2024-03-10: Please also check out my new Blade Dispenser for this Bed Scraper: Optimized Bed scraper with replaceable blades Since the…

Downloads
20,238
Likes
3,454
Rating
4.87
P
PrintablesTom

Topology optimized shelf bracket - holds over 80kg each

Strong shelf brackets designed to hold a 300mm deep shelf board! These were made with Fusion 360's topology optimization feature for the unique look, but they're definitely not too shabby in the strength department, either. Each one holds…

Downloads
16,512
Likes
4,050
Rating
4.93
P
Printables3D_Workspace

Corner Bracket v2 (optimized for 3D printing)

Normal 3d-printed brackets can easily break if you overtighten the screws. These brackets are specially designed for FDM-3D-printing. Because of their wide surface areas on every layer they can withstand multiple times more force than…

Downloads
13,818
Likes
6,722
Rating
4.98
P
PrintablesRiskable

Complete Cherry MX stem keycap set optimized for 3D printing (GEM profile, multi-material)

IMPORTANT: PrusaSlicer thinks some of these keycaps used inches. This is incorrect. Tell it “no” if it asks about that (but say “yes” to multi-material). I included screenshots of the correct responses to these pop-up dialogs if you look…

Downloads
10,431
Likes
2,555
Rating
4.8
P
PrintablesNaoki Hayashi

Desk clamp with hook | Topology optimized

More durable than it looks. No support required.

Downloads
10,220
Likes
2,439
Rating
4.9

Optimus Primal - print in place figure

A print-in-place figure of Optimus Primal from Transformers: Rise of the Beasts. Created by Nikko Mendoza.

Downloads
9,686
Likes
1,970
Rating
4.93
P
PrintablesMetikumi

Stackable Storage Boxes Optimized for 3D Print

This Project is Outdated! For the latest Revisions check out: Stackable Storage Boxes – 2024 Update The following description is no longer updated: Discover my specially designed storage boxes, meticulously optimized for 3D printing.…

Downloads
9,645
Likes
2,151
Rating
4.93
P
PrintablesLarsocam

Miniature Labubu with Rotating Eyes - Keychain Option

Labubu Mini - This model is shrunken down to 2/3rds of the original size. Plus I added the option for a keychain. The body can be printed without any supports. I did add a brim to make sure it doesn't tip while printing. Options include…

Downloads
8,956
Likes
1,065
Rating
4.68
P
PrintablesJMAW

Optimized Gridfinity Base: Faster, Smarter, Better!

A great deal of care must go into a design before there’s nothing left to optimize. I think we can all agree that Zack Friedman’s Gridfinity system has become a benchmark for organizational systems across sharing platforms. However, every…

Downloads
7,581
Likes
1,877
Rating
4.92

Soda can opener - with option to use as lid

Soda can opener with option to use as lid for bee and other Insects, will also reduce spillage if tip over. How to use it: Open soda can Insert the soda can tap into hole in front Pull up to open the soda can Push it down to lock it on…

Downloads
7,356
Likes
900
Rating
4.9
P
Printablesfifindr

Charger Port Cleaning Tool - USB C Optimized

Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Tip is thinner, handle with care! Keep your charging ports spotless with the Port Cleaning Tool V2! This optimized version is specifically designed for…

Downloads
6,678
Likes
1,140
Rating
4.89
P
Printables3DJourney

Perfect 1st layers! Ender 3 v2, Ender 3S1, Ender 3S1 Pro - 3x3 Calibration Bed Leveling Squares optimized for Professional firmware with UBL

Don't forget to hit the like button if this helps you :) A perfect calibration square print has alluded me since I got my Ender3S1. Sure I have lots of prints that work but most of them are smaller and around the center of the plate. If I…

Downloads
6,354
Likes
511
Rating
4.94

3D Printable Screw Generator for Fusion 360 (Optimized Threads)

3D Printable Screw Generator for Fusion 360 This is a fully editable Fusion 360 file designed to generate screws specifically optimized for 3D printing. Most standard metric threads are designed for metal manufacturing, not for FDM…

Downloads
6,125
Likes
1,620
Rating
5
P
PrintablesTim

Lenovo ThinkCentre Tiny 10" Rack Mount - now with optional Keystone Sockets (M720q, M920q, P330, etc.)

I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…

Downloads
6,031
Likes
467
Rating
4.97
P
PrintablesDeSteiner

V10 Engine Turbocharged working belt driven Model (printer optimized)

Hi there! Welcome to my most complex model so far! Do you hate models that are a nightmare to print? Because I do! Easily printable models is an attribute that I want my name to stand for! I designed this engine model from scratch and…

Downloads
5,726
Likes
1,780
Rating
4.95
P
PrintablesMikolas Zuza

Smoothed topology optimized shelf bracket - Flat & thicker back, smoothed body

I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…

Downloads
5,195
Likes
1,351
Rating
4.94
P
PrintablesVictronix

Galaxy S24, S24 Plus, FE and Ultra cases, MagSafe option

Galaxy S24, S24 Plus, FE and Ultra cases, to be printed in TPU of your choice. These models are based on official 3d models from Samsung and have 0.2 mm clearance around the phones. edit on 12 Oct 2024: Added Galaxy S24 FE case. Added…

Downloads
4,833
Likes
178
Rating
4.92
P
PrintablesMajorOCD

Hinge Print In Place (optimized for 3D printing)

I have seen a lot of print in place hinges but the ones I have tried have not been optimized for 3D printing. That's not to say there are not any out there, I just haven't found any myself. If you look at the cutaways for this, you will…

Downloads
4,418
Likes
60
Rating
5
P
Printables3DPremiun

Goku Dragon Ball Z #22 Optimized for 3D Printing

—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…

Downloads
4,357
Likes
445
Rating
4.89
P
Printablesmaximhuz

Tesla Optimus Bot 1.0 based on Dummy 13

Meet the Mini Optimus Tesla Bot - a one-of-a-kind figure I designed, based on the legendary Dummy 13. This isn’t just a decoration - it’s the perfect collectible for any robot fan, not just those who admire Tesla! Update: 07.02.2025 -…

Downloads
4,202
Likes
1,382
Rating
4.14
P
Printablesplasticbruv

MP10 Masterpiece Optimus (Articulated, Color Separated, Transformable)

24/01/26 - V2 DEFINITIVE UPDATE Is buying a KO MP10 off aliexpress too easy for you? Do you already own every single iteration of this mold? Do you want to be a god? Thanks to the amazing updated original file by Petergross3, I'm proud to…

Downloads
4,201
Likes
878
Rating
5
P
PrintablesTek

Creality K2 Plus CFS desiccant box + optional lid

Desiccant box for the K2 Plus CFS system with optional custom lid which snaps into place like the original. If you prefer the original, it's compatible. Print in provided orientation, no supports needed. Turned out great with Creality…

Downloads
3,967
Likes
382
Rating
4.6
P
PrintablesGijs

Sliding Door Lock / Latch with optional Filler Block

Print as the attached .3mf files (for 0.6mm nozzle) to get the best strength for the parts. The filler block should be adjusted to match your door, and can be left away of course if there is no height difference. In my case the height was…

Downloads
3,760
Likes
671
Rating
4.97
P
Printablesdebren27

Bambu Build Plate Holder with 2-8 tapered slots, open infill, optional tongue

Also available on MakerWorld! Model 41379. Come join the party! UPDATE November 27, 2025: I have confirmed that scaling the model to 129% on X works for H2C build plates. Scale it before rotating it to fit. You can also just use the same…

Downloads
3,727
Likes
419
Rating
4.97

[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip

This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…

Downloads
3,715
Likes
520
Rating
4.89
P
PrintablesDiablo

270 Degree Geared Hinges (V2) for K1/K1 Max/K1C. Easy print option. Not print in place.

I CANNOT SAY THIS ANY SIMPLER. I'M WRITING THIS IN UPPER CASE SO THAT WHEN SOMEBODY SAYS ‘I DON’T UNDERSTAND WHAT I NEED TO PRINT' I CAN SAY IT'S ALL IN THE INFORMATION PAGE. AT A BARE MIMIMUM, EVEN IF YOU DON'T READ ANY OF THE MAIN TEXT,…

Downloads
3,680
Likes
726
Rating
4.57
P
Printablesk2thestank

Bambu P1P and X1 Sliding Vent Glass Top Enclosure /w LED option

A new low profile version #2 incoming soon with better LED placement and more versatile printing with customization options coming very soon Slider version now live and available Test prints have been successful and are now good to go. If…

Downloads
3,630
Likes
843
Rating
4.57
P
PrintablesPA1_MAKER

MINI GARAGE DIORAMA FOR 1/64 SCALE DIECASTS - OPTIMIZED FOR FDM PRINTING

Mini garage diorama to display your 1/64 diecasts especially designed for FDM printing. Everything prints fine, and is designed in fonction of layer heights and widths. Modular, very easy to print, this one requires no supports at all!!…

Downloads
3,561
Likes
501
Rating
5
P
PrintablesToymakr3d

G1 Transformers Optimus Prime (+ Upgrade)

G1 Transformers Optimus Prime base on 1984 Transformers TV Series. This is fully articulated model but not transformable. Disclaimer: Contains small parts and requires high precision. Your printer may need to be properly calibrated for…

Downloads
3,380
Likes
729
Rating
4.97

FlashForge Adventurer 5M Screen Bezel With Optional Stylus Holder

Overview A screen bezel and a stylus holder for the FlashForge Adventurer 5m. One M3x6 or M3x5 screw is required to securely fasten the stylus holder to the cover. A bit of super glue might help as well. The bezel is a semi-loose fit for…

Downloads
3,317
Likes
399
Rating
4.93
P

Balloon Dog (Jeff Koons) [nose optimized]

Model of Jeff Koonss Ballon Dog. I recommend for FDM printing to print the model splitted in left and right half. So that there are no or only a few supports needed. The two halfs can now be connected with the feather keys. The keys have…

Downloads
3,307
Likes
494
Rating
4.85
P
Printables3DPremiun

Broly and Goku Dragon Ball Z #16 Optimized for 3D Printing

—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…

Downloads
3,298
Likes
272
Rating
5
P
Printablesdanec

"Plasticlamp" Multi-Purpose Clamp: Adjustable Phone Holder, Magnetic Ring Option, Camera Mount, and Flashlight Support

Edited 09/27/2026 By user request, I added PIP clamps in 42 mm, 44 mm and 46 mm diameters. They are available only in the unmarked version, in the Pipe Clamps (second version, PIP, unmarked) folder. Edited 06/06/2025 I’ve added a custom…

Downloads
3,280
Likes
941
Rating
4.78
P
Printableskh4rj0

Articulated Ice Dragon FIXED + MORE OPTIONS

This is a remix of the Articulated Ice Dragon by p1lotz . In the original upload, the last segment and the tailpiece were slightly stuck together. This version fixes that, and I also added a version with no arms and Low-Poly versions: The…

Downloads
3,036
Likes
357
Rating
5
P
PrintablesDen

VW Bus Marker or Tool Holder with Working Wheels (optimized for Prusa Mini)

Disclaimer : I do not take any design credit (nor blame for the flaws) of the original model. I merely tried to repurpose and improve upon it for personal use. Optimized for Prusa Mini or similar sized bed: all the files are scaled and…

Downloads
2,997
Likes
731
Rating
4.88