271 models
The Polymaker spool adapter is designed to help your cardboard spools print more consistently by reducing friction and creating a structured rolling surface. The spool adapter clips around the face of the Polymaker cardboard spool and is…
Polymaker Phone Holder designed by Gulsifer and print tested by Zombiehedgehog and Pezliz: https://www.printables.com/@Gulsifer It was designed as a giveaway print for MRRF 2023 Join our Discord for more community awesomeness:…
PrusaSlicer filament profiles* for the various lines of filament produced by Polymaker. Because well-tuned material-specific settings outperform generic default settings. * Or ‘presets’ as the kids are now calling them. Observations…
The Polymaker Reusable Master Spool is a durable, empty spool designed to hold refill filament coils sold without disposable plastic spools. It allows users to reuse the same spool multiple times , reducing plastic waste and shipping…
I LOVE the modular design of the PolyMaker PolyDryer. However, one thing it couldn't do over my previous setup was dry two filaments at the same time. Well, now it's totally possible thanks to the Double Barrel Mod . Print this mod in…
Instructional video is included in the download files. Remove as much of the glue in the first stage of the process. This will make sliding the adapter into the cardboard core easier. Make sure not to jolt or shake the bare filament or…
UPDATE: Version 2.1 of this spool adapter has been uploaded. Slight correction to V2 on the retention tabs. This is a Bambu Lab AMS adapted for Polymaker cardboard spools. There is one registration pin to avoid slippage. I honestly do not…
Other polymaker cardboard spool adapters out there have the following problems: 1. They fall off 2. They slip during AMS rewinding 3. They are so large that they require you to leave the AMS lid propped open so that they don't rub on the…
This adapter system wraps the edges of a POLYMAKER 1kg cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Notes: I've tested with several POLYMAKER…
Rules: -Weigh less than 50g -Cannot be assembled -Must open to accept 8mm shackle The competition was a head-to-head tug-of- war, last to break wins. We could choose between PLA, PETG or ABS depending on the opponent we were up against.…
Halloween Models specifically designed for our Halloween Pack 2023 Models do not require printing support. PolyTerra™ Marble Gradient PLA Pumpkin Patch Orange PolyTerra™ Marble Gradient PLA Gastly Purple PolyLite™ Glow/Luminous Gradient…
Added some tabs for the top 2 and bottom 2 holes of the Polymaker spool.
Designed to fit the ABS Polymaker 3D Cardboard Rolls snaps in place, its designed to fit snug and little teeth to help it in place with added teeth to help grip the wheels inside the AMS just print 2 of them and your good to go! Should…
Update v2 (Sep 14 2024): Due to popular demand, version 2 now features vertical grill vents and removes the arrow tabs on the cover. While version 1 works for most, some encountered printing issues, which this update addresses.…
Designed to perfectly fit the Polymaker cardboard. I have tried other ones, but they had sloppy fit. My design has ribs so it has a wider range of fits.
Two of these fit snugly in the lid of the plydryer box. When loaded with desiccant they will not fall out and installed they leave room for the filament roll to spin freely. To make the mesh on the lid you must use a modifier shape with…
Spool Adapter for Polymaker PolyTerra and PolyLite Filament. Designed for Bambu Lab AMS.
About A ground-up rebuild of the excellent Polymaker spool adapter with the following changes: Edge clips removed (These tend to damage spools and are also not needed since the adapter uses the locator pin to lock into place) The Center…
The PolyMaker cardboard spools are great except for the friction. These spools were straining my printer and the filament always looked so tight between the spool and extruder. Some designs use bearings, but this seems like overkill and…
Background: Adjusted diameters to give more “slop”, added crush ribs to securely grip cardboard center and account for manufacturing tolerances, & removed filament tail cutout. Will work with Polymaker 1kg, 0.75kg w/spacer or 0.5kg rolls…
I have made some Profiles for myself to Print these Nylons and wanted to share these for others to use. These are for the P1S but they probably work for the X1C aswell, i am using Orca Slicer and the 0.4mm Nozzle.
The Polymaker Reusable Master Spool is great, but having the holes modeled into the part means the slicer has to create a lot of perimeters (which makes for slow printing). The slicer is optimized for creating sparse infill patterns that…
The Cardboard Spool Adapter from Polymaker helps to reduce friction for a more reliable unwinding of the spool itself (especially if the spool got damaged somehow). Since I have the stock Voron spoolholder mechanisms in place I didn't…
Polymaker Scientist. SC: CLKWM47D5T
Wasn't happy about drying Desiccant in our oven which is used for food, so I made this box for our Polydryer You turn the top to dry or empty the container as you can see in the pictures. Printes i PLA. 15% Infill 0,2 layer hight
Spool dimensions used to create this adapter: 55mm hole diameter 66mm spool width
Removed all the useless center piece of the original and added better edge tabs with 45 degree chamfer instead of an unsupported overhang. Prints fast at 8 gm/21min on X1C. Shrunk down to 99.5% of original for a snug fit.
UPDATE: 2023-09-15 I got tired of gluing in the adapter rings. I added flutes on the sides to ensure a tight grip. I also switched to a full core version that is the full with of the spool, so you will only need one piece. Adapter Core…
NB3D Spool Adapter Ring V1.3 200/55 This adapter ring is designed for use with the Bambu Lab AMS. It snaps onto the spools tightly and uses teeth inside to prevent the ring from slipping around the spool. This adapter ring also works on…
I was using JamKo76's Polymaker rings, but the nub/tab was always hard to push in, and the rings were a little too thick to roll smoothly in my AMS. So I trimmed 0.4mm from the base of the ring to make it fit better without affecting the…
I love the Polymaker PolyDryer boxes, but I wanted a way to securely connect the 4mm PTFE tube to the box, so I made this model. The adapter is chamfered on the inside to gently guide the filament to the coupler. It can be installed on…
Christmas Models specifically designed for our Christmas Pack 2023 Models do not require printing support. PolyLite™ Silk PLA Champagne Gold PolyLite™ Silk PLA Santa's Velvet Red PolyLite™ Dual Starlight PLA Comet's Extravagance Green…
Bought the Polymaker Polybox drybox Edition 2 to keep my filament dry. The box comes with some plastic tubing with a 6mm outer diameter to guide the filament to your printer but no way to mount it your printer. Searched a bit for already…
Hello, I created a desiccant tray for Polybox II I haven't tested it if this shape fits for Polymaker ver.1 It has top cover so you can't spill out beads For the hinge use: 2x M3x20 allen screw and 2x M3 standard nut v2: Hinges change,…
A remix of the official Polymaker Cardboard Spool Adapter which fits their 3kg cardboard spools. Step file, .STL, and CAD (Alibre) project are available in the downloads tab. I recommend printing it out of something with a higher HDT than…
Hey all. I wanted to upgrade my spool solution to these large and heavy spools to something with bearings. So, without re-inventing the wheel I sourced the internet for inspiration. I found Polymaker has a model similar to this, but…
The use of Polymaker cardboard spools in Bambu AMS can pose several issues, despite having a shim installed. This adapter intends to address such problems by enabling the adaptation of Polymaker cardboard spools onto Bambu reusable…
This remix is designed for use in the Bambu Labs AMS system. It adds additional weight to the cardboard filament spools as well as helping to keep filament dry in the AMS. A small flange was added to both the barrel and cap to keep the…
Polymaker cardboard spool adapter with modified edge tabs to grab onto cardboard spool lip better. It also prints easier as the edge tabs are supported with a 45 degree chamfer instead of an unsupported overhang.
See Text file for settings, orcaslicer profile in the .zip. To add go to file-Import-Import Configs and it should add it in. It will only show under bambu p1s 0.4mm nozzle size To avoid confusion. the filament will be added under the…
Adapter for noctua NF-A4x10 24V replacement fan to quiet down the polydryer. Uses screws that come with the noctua fan, prints with no supports. => the part only interacts with the “cold” side of the heater, still recommend heat resistant…
I was working on my own version of a spool adapter for AMS that's abit more sturdier than what's out there. I ran across the polymaker version that was recently released and liked it better than mine as it has extra features (holes for…
Remixed Jarhead's excellent spool adapter for 200mm cardboard spools like Elegoo, Overture, and Polymaker (note; this SHOULD fit a Polymaker spool, but I don't have a test spool here. If someone could test it out for me that would be…
SUPPORT MY WORK If you appreciate my designs and would like to support my work, or if you're interested in a commercial license to sell my models, here are some options available: PayPal Subscription Plan: Subscribe Here Patreon Site:…
Here is my third take on a hanger design for the Polymaker Polydryer. I have another design for Ikea Skadis mounting available HERE , which is the same design. The only difference is the Skadis hooks were replaced with a French cleat for…
Here is my second take on a hanger design for the Polymaker Polydryer. I have another design for a different mounting orientation available here . This design takes up less space on the Skadis board while allowing access to the power…
Brandon made a really nice tweak that made this fit better, but I really liked the filament notch from the original design here . This modified version just takes Brandon's version and adds that notch so that it's easier to use with…
I made the Double barrel mod slightly taller so I only had to print one set of the air exchangers. Print both as you would the originals. Link to air exchangers- https://www.printables.com/model/1048454-polydryer-air-exchanger
Polymaker 5kg Spool Holder designed and printed by Dennis from Toronto Hardware required: - 4x 3Mm hex nuts - 4x 25mm 3mm bolts - 8 bearings 1/2” with 1/4” ID Bushing goes on bolt side on axel. Axels printed at 40% Rollers two piece. Line…
Polymaker has a well-design spool adapter for systems like the Bambu AMS, though I'd generally prefer an adapter that prints faster and uses less filament. These models remix the Polymaker model for the same precision fit but can print…
Love the Polydryer Box Lid Desiccant Holder , but figuring out how best to fill it was a little difficult. I adapted the funnel I had from @Robinson by widening the whole assembly, cutting down the spout on one side, and adding a lip to…
UPDATE - Added v14 model in which I have made some minor tolerance improvements based on a few dozen more polymaker spools. First I use a small piece of blue painters tape and secure the end of the filament flat to the filament winding.…
Added ribs to better fit Polymaker spools.
Many new cardboard spool adapters are available to choose from. This adapter addresses the need to work with more than one brand. This adapter will work with either Elegoo or Polymaker cardboard spools. 2 rings are suggested. These have…
An ever expanding list of filament swatches for Bambu Lab and Polymaker PLA, PETG, ABS, and PC filaments. These swatches provide a nice color representation of the filament as well as light bleed for thinner walls. Both stl files are…
I made a desiccant tray for the polymaker polybox so you can use your own choice of silica gel desiccant beads instead of the provided packets. It fits like a glove in my Polybox edition 2, should also fit in the original Polybox, but…
Label with Color Swatch Holder, and modified version without color swatch. Two versions, one with magnets and other with double side tape. Useful for displaying printed product label or paper labels in a store or warehouse. You can buy…
This is a remix of the great spool ring design by SpectreGadget made for the Inland and Overture cardboard spools. There are clips in the inner bore of the spool that hold the ring securely in place, as well as pegs toward the outer brim…
What it is The Triangle master spool is a remix of the Polymaker reusable master spool. It uses up to 15–20% less material thanks to a sick triangle cutout design. Original Polymaker Master Spool:…
This desiccant holder easily clips inside the center opening of a Polymaker cardboard filament spool or a Prusament plastic spools. The desiccant container does not need to be opened to remove it from the spool. The desiccant holder can…
Was having issues using my RepRack above my printers with 3kg Spools so I made my own solution! This works amazing and lets me print right from a rack mounted spool holder above the printers. Optionally add non-skid feet for a standalone…
A snap together printed insert to fit the ID of a Polymaker 1Kg cardboard filament spool I don't know if this is considered a remix or not…… I used the design from Alex's model, but I created a new model and design for the snap connector…
I designed this seal adaptor to be able to use the PC4-M6 Bowden Push-Fit Adaptor in the Polymaker PolyDryer Box without any modification to either part. I printed this seal adaptor out of TPU to press into the PolyDryer Box. The PC4-M6…
Specifically for Polymaker spools. For Overture spools, use - AMS Card Spool Adapter - Overture by Nirin | Download free STL model | Printables.com Using cardboard spools with the AMS, or on any regular spool holder, produces dust and can…
Angled Display for the Polymaker Polydryer to increase readability. Splicing of the brown cable by +-20mm was necessary. Faceplate can be found here: https://www.printables.com/model/1170811-faceplate-polymaker-polydryer Perfect time to…
Replacement faceplate for the Polymaker Polydryer. Prints with no supports - recommend heat resistant material - use petg-cf myself with no problem.
Inspired by Polymakers cardboard spool adapter, this protective rim and spindle will help alleviate common issues with cardboard spools as they become more commonplace. The models themselves are light on material and you can print them…
This is a low investment (only about 60g each side) master spool scaled for polymaker refill spools. For me these came out as press-fit into the cardboard. I thought this design was pretty so I used it as a base despite the fact that the…
Important - resize to 100.75 in Prusaslicer for Inland PLA. This then snaps on around it. This is a simple rim. Print in PETG .25 layer height. You might also try 100.65 resize for a little tighter fit and see which one you prefer. 100.65…
These are dustcovers that fit over the inlet and out openings on top of the Polymaker Dryer. (https://a.co/d/fseLejl). Two required. I printed these .20mm layer height and 15% infill.
I found the original design to be great, but was never a big fan of clips around the edges as I found it difficult to quickly remove the adapter to use on other spools. In this remixed model I removed the clips around the edges which…
I kept having issues with PTFE tubing getting pulled into the Polydryer box while printing when the tubing was run through the included rubber grommets/ plugs. This nut lets you remove the rubber plug and mount a M10x1.0 threaded coupler…
Designed for Polymaker and Overture spools, but will fit any 55mm ID, 65mm wide spools. Works well with Voron and Prusa style spool holders. Comment if you need any different sizes and I'll add them!
Desiccant container to sit behind filament spools. Provides generous desiccant volume for nice dry filament environment. I'm unsure if this works on the first edition PolyBox as I don't own. I've designed this with basic chimney effect -…
This is a remix of the Polymaker Cardboard Spool Adapter with a larger inner ring to fit an OpenPrintTag.org NFC sticker . Additionally, an improved version that works better with Polymaker's new spool design is available. A trimmed down…
Mount to the right side of spool (when in AMS) to avoid collision with AMS guides on the left. Works perfect on the right side. This is the Polymaker variant of my Ultimate Filament Clip which was originally designed for Bambulab spools.…
In order to use POLYMAKER cardboard spools in the AMS, the CBAS series has been expanded. The spool needs around 183 grams of filament with 15% infill, making it not lightweight but rather sturdy and smooth-running. So far it has always…
If you're like me, you're tired of wrenching the lids of these Polydryer dryboxes open every time you need to load filament. I leave the PTFE tube in the dryboxes even when I don't print, so that I don't need to open the box to load my…
Simple bushing to reduce the force required to unwind a spool of PolyMaker filament!
This custom-designed end cap fits perfectly on the PTFE tube included with Polymaker's PolyDryer kit. Keep moisture out and protect your dried filament with this easy-to-print, functional plug. The cap features a precise fit with an inner…
One of the original plugs of one of my PolyDryer dry boxes was damaged by my Bentley (my female bunny). I originally thought I might see if I could purchase a new plug from Polymaker, but with some inspiration, I decided I'd make my own,…
I wanted to invest into the Polymaker refill system but with a stronger spool design as I found that the original spool sides fell apart pretty easily after just a little bit of use. Improvements: Spool sides connected with fasteners M3 &…
Uses DIN-Schablonierschrift by Marian Steinbach, download from DaFont.
Thanks to @Josh3d for the files. Reuploaded from MakerWorld This is an adapter to help fit cardboard spools on the Bambu plastic spool holders, for use with the AMS. It has a few key differences over other spool spacer/adapters I've seen.…
NEW model, the second version has a bit more grab to prevent it from coming loose. It needs to be printed with supports but they are tiny and only take a second to remove. Instead of “pushing” into the spool, place it over the hole and…
Spool adapters to go on Polymaker cardboard rolls for use in the Bambu Labs AMS system. They fit very snug in the tab and inner spool diameter so don't be shy about using a bit of force, they won't fall off or slip once they are on.…
Polymaker Mad Hat designed by Greath from our Discord community: https://discord.polymaker.com/ Printable in vase mode, how fast can you print one which can fit you?
Preface I haven't had a chance to print this one off, yet, but it uses the same gears as my GeaRing fidget ring, so it should work just fine. The GeaRing was printed with a 0.25 mm nozzle, but with the introduction of the Arachne engine,…
About This spool adapter is specifically made for Polymaker & PolyTerra filament. The spool adapter will be usable for systems like the Bambu Lab AMS system. Not only are these filament adapters durable they will also reduce friction on…
A carabiner-style hook I made as an entry to the PolyMaker strongest hook competition a while back. The goal was to make the strongest open hook that had no closed holes. The model also has a mesh modifier to strengthen it in the areas…
Printed on a Bambulab P1S 0.16 - 0.2 mm layer height 2 - 3 walls
Modified to fit wider 5kg Polymaker spools. I ended up super-gluing the half rollers together since making them longer added some sag.
Polymaker Cardboard Spool Adapter Remix for the CFS RFID reader. removed outer ring because it made spools too wide
A shaft/roller for Polymaker's PolyDryer. When printing fast the PolyDryer introduces gaps/blobs into the print because the spool starts to hang/drag. I designed and tested this new shaft/roller to be used instead of the non-rolling shaft…
Made this to put inside the cardboard PolyTerra Spool so that it runs smoother. Made it in two parts so that it can snap together and come apart to be reused. Share a make, post a comment, or give a like if you try it. Open to…
Designed my interpretation of a printable Polymaker logo for MMU as well as standalone. Best printed in Polymaker PolyLite White and PolyLite PolyMaker Teal.
This is a Cardboard Spool Adapter for the spools Polymaker and Panchroma Das ist ein Cardboard Spool Adapter für die Spulen Polymaker und Panchroma
This is a simple lightweight spool adapter for Polymaker cardboard spools, specifically the newer kind that has the holes spaced 120 degrees apart. It slots into the holes to provide a bit of a better fit. I've got a few variations…
Designed by specs given from Polymaker website 1kg cardboard spool: Spool Inner Hole Diameter: 55±1mm Spool Diameter: 200±1mm Spool Width: 65.6±2mm Full model or Two part model available
Why Use Rims? Printed rims improve the strength and reliability of cardboard spools. They also prevent the buildup of cardboard dust that can interfere with material handlers. Which Version? These models fit Polymaker 1kg cardboard…
