1,624 models
Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Just a simple tool to set the correct height of the Pinda or Minda probe. Yes i know this is also the thickness or a simple calbe-tie! But i ran out of those so this little print came to the rescue. Print instructions Just print at 0.2 mm…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Print settings: zero top layers zero bottom layers zero infill 3 perimeters 0.4 nozzle 0.2 layer height no supports I used PLA.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
I printed two probe spools to better organize my pellet grill temperature probes. I designed this magnetic hanger to keep them handy on the grill. It has two pockets to glue in 12x3mm magnets. It could also be used to hang other things as…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
Did this ever happen to you? Worry no more! It might not be the most aesthetic solution but it's simple and it works. The files are just examples for my probe (8/37mm)
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
pH or ORP probe pipe-drilling / holder. It is designed to keep probe safely in the water. Should be mounted behind filtration system but before heater and any chemistry injection system also. Easy to use, just drill hole into the pipe…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET
(English below) @vogon hat ein nützliches Modell einer Halterung für die Messspitzen der Oszilloskop-Serien Rigol DHO800/900 (S) entworfen. Mir war die Platzierung am Arbeitsplatz jedoch zu unflexibel, weshalb ich mit Zuhilfenahme eines…
Print approx. €7.81–€9.55 excl. taxPreliminary estimate for one variant
I needed to test some button cell batteries but my cheap multimeter had no built in load resistor. This super simple tool help clamp a resistor and dupont jumper wires to the probes. I used male-male dupont wires, removed the plastic…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
3D printable modifications to attach an oscilloscope probe to a low cost magic arm mounted to a Stickvise: StickviseArmBase: Base that goes between the Stickvise and its jaws, onto which a magic arm can be mounted via M5 threads…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
This two sided tool is used by my artist wife to create textures and scrape on her canvas. I put one in my tool kit to occasionally use as a probe or scraper in tight spaces. It is printed in PETG with organic supports.
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
O'scope came with 4 color bands, none of which matched the dark-blue of channel 4.
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for one variant
I found most of the models out there didn't fit the width of my Fluke 87 meter so I made my own. I decided to use standard ½" metal J-hooks to attach to the pegboard as I didn't want the printed ones to break off and drop my meter. This…
Print approx. €2.71–€3.31 excl. taxPreliminary estimate for PETGSource material: PET
PETg, 30% infill, 3 perimeters, supports
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for PETGSource material: PET
Quick printing test probe to fit the J6 gripper mount on the AR4 robot from Annin Robotics . The probe tip has a known distance (50mm) from the gripper mount plate that you can input into the kinematic model and the PLA is forgiving if…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
PLA 5g, 50 minutes
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
The two halves screw together with M3x30 socket head cap screws threaded into M3 hex nuts. The inside part presses into the Fluke ToolPak magnetic hanger accessory pocket.
Print approx. €0.94–€1.14 excl. taxPreliminary estimate for one variant
Stohovatelný držák na teplotní sondy na grilování a vaření. Chrání sondu před poškozením, pokud používáte více sond je možné jednotlivé držáky na sebe skládat. Stackable holder for temperature probes for grilling and cooking. Protects the…
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for PETGSource material: PET
I needed a container for my new Rösle BBQ Probe/Thermometer so i designed it to fit in the Parametric SnapLock Box by Hugo. https://www.printables.com/de/model/805599-snaplock-storage-boxes-parametric Box Parameters Used: Length: 100 mm…
Print approx. €3.83–€4.69 excl. taxPreliminary estimate for one variant
Motivation I purchased a Thermoworks RFX Wireless Probe Starter Kit and wanted a dock to efficiently store and transport the probes in their charging blocks between the kitchen and my grill. Solution Design a custom Gridficiency-based…
Print approx. €4.03–€4.92 excl. taxPreliminary estimate for PETGSource material: PET
I needed a way to securely attach my scope probes to PCBite. I like the gooseneck that they provide but i'm not a fan of the probes. I wanted to just reuse the scope probes I already owned. The hole on the bottom of the part was designed…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.
While the world seems to talk about eddy current based sensor probes nowadays, I still like the little PCB Klicky 🥰. So building my 2.4 I just optimized what is out there to dock the probe securely in place. Support me : Please leave a…
After using the zip ties for a while to level the Pinda Probe I started to get worried about running out of them so I designed this. This replaces the zip tie that is used to level the probe. It is a very quick print and is well worth…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
This simple tool helps find the proper offset for your Cartographer probe in relation to your nozzle tip. Having a 2.6-3mm Z offset is critical for reliable operation of Cartographer Touch (nozzle probling). The Y offset ruler is just a…
This is a remix of the popular Multimeter (DMM) Probe Tweezer made by QED_Maestro. Description This model provides a convenient way to hold both of your DMM probes with one hand. The upgraded secure holders prevent the probes from falling…
Compatible with: Extruder : SKU M3201 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers SKU M3203 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (Linear Rail Edition) Hotend:…
Extruder ribbon cable strain relief cable guide Fitting a cable guide to your printer allows the ribbon cable to flex gently over its length rather than bending all in one place - which can lead to broken wires. This unfortunately is a…
This is the robot from the icy snowy planet in the Fifth movie and not screen accurate. Model is finished and print verified. This model is best printed at 100% scale on FDM. SLA/SLS - go as small as you'd like. I find on FDM, 120% to…
Great original design by QED. Reinforced tweezers to hold your Multimeter Probes Print in PETG preferably for strength and a little flexibility.
This Creality Sprite Extruder backplate relocates the CR Touch probe to X=-47mm, Y=0mm. This allows the bed mesh to be more accurate along the Y axis because the hotend lines up exactly with the probe (useful if the Y extrusion is…
Vielleicht kennt der ein oder andere mein Problem. Beim Drucken von Filamentproben verheddert sich das 3D Druck Filament und der Druck schlägt fehl. Doch hier nun meine Lösung für das Problem: ein Filamentaufroller für den Akkuschrauber.…
This temperature probe organizer is designed for the Rubicson wireless BBQ thermometer with 4 mm probes that can be found at kjell.com in Sweden. There is also a step-file attached for easy modification. The parts are intended to be glued…
beacon probe mount designed to work with the stealthburner X carriage. let me know if you have suggestions. thanks printed w/ 23% infill in ABS uses: 2 - 3mm thread inserts 2 - 3x6mm Button head screws ***only tested on a Voron 2.4R2…
BIQU Microprobe STL and STEP file. Found it on the BTT GitHub.
Digital Multimeter Tweezers – DIY SMD Test Probe This is a custom-designed digital multimeter tweezer attachment that I designed from the ground up to make testing SMD (Surface-Mount Device) components faster, easier, and more accurate.…
Bei Fragen gerne Anschreiben, oder wenn ihr mir die Anforderungen für eure Probe schickt, kann ich dazu auch eine fertige Druckdatei hochladen. Für Creo .prt Datei Anschreiben. Die .gcode Datei ganz oben entspricht den Anforderungen der…
I suggest ordering the unassembled or Low Profile variant of beacon, or you may run into clearance issues. You MUST edit your config to make sure you don't hit the probe on your rear Z-axis lead screw constraint! :) 3.17.23 Update v1.3…
KlackEnder Probe Rev2.1 KlackEnder Probe - Simple, fast and cheap! What is this about? Adaptation of the Klicky / Quickdraw Probe for the Ender 3 and comparable Creality printers. The probe is compatible with all printers that use the X…
The PCB Workstation with Nano Probes is the best solution to work with electronic boards equipped with SMD components that are very small and hard to access for many of the most used laboratory test probes. UPDATED: Now you can buy the…
AUG 2024 - V0/Printers for Ants: Do not print this!!! I hope to have a V0 compatible mount when finishing my Hex-Zero build. Carto/Beacon sits already very close to the bed, I didn't like how the stock probe mount had the risk of screws…
…Please be sure to hit like & post a make, I'd love to see your prints! Add a highly accurate M12 LJ12A3-4-Z/AX inductive probe to your SV08! This probe is a NPN NC probe. This means it is normally closed & will provide a “low” signal…
This model and associated optional configurations are the result of months of trial and error work to improve the chamber heater behaviour of the Qidi Plus 4. The stock chamber thermal probe is located under the frame rail to the…
Can protect the probe body by triggering contact stylus, probe must be active and in protective mode to react. Won't help if you handwheel the Z at Mach speeds. Recommended Print Settings: Seams-Random Walls-4 Infill-Gyroid ≥35…
Compatible with: Extruder : SKU M3301 - Micro Swiss NG™ REVO Direct Drive Extruder for Creality CR-10 / Ender 3 Printers Hotend: E3D Revo Hotend Fan: 4010 Part Cooling Fan: 4010 Blower Probe: Various Options 3D Printer Model: CR-10 CR-10s…
UPDATE 25/3/2023 thickened bracket as noticed it heat creeps over time. this reduces the amount tap can move but should still trigger. print standing on its end. Uses 4x m3 heatsets 2x m3x10 Attach probe to bracket with included small…
I took the factory hotend mount model and remodeled it to accept the X gantry Voron Clockwork 2 left and right mounts. Since the SV06 has its own probe and uses sensorless homing I removed unneeded geometry for belts, probe mounts etc.…
This is a simple adapter so that the Biqu Microprobe can be mounted on the mounting points made for a CR Touch or a BL Touch. It is essentially an extender, since the microprobe is significantly smaller in height than the usual suspects.…
We have been playing The Invincible recently and we loooooved the sci-fi style sooo… we got inspired for such a design! We hope you enjoy the design too! Print information: Recommended regular/base settings (15% infill, 5 top layers, 4…
Contributo ai vari sistemi fanduct VzBot in abbinamento con i sistemi Klicky Probedi Jlas1 e Quickdraw di Annex effettuando delle modifiche in modo che i due sistemi si fondono in un unico componente. I sistemi sono stati testati su…
Remix from: https://www.thingiverse.com/thing:5513241 Added legs for stability when laying down on its back. UPDATE: I've made a pegboard cradle for use with this model. See it at:…
The PCB Workstation Kit V1 with Needle Probes is the ideal tool for hobby or professional work on small or medium sized electronic boards (PCB width from 10 to 156 mm). UPDATED: Now you can buy the much improved 2024 V2 kits at…
This is a Klicky probe dock modified for compatibility with E34M1 and other Mercury One toolheads.
Tidy up your electronics bench, and keep your oscilloscope probes handy with this oscilloscope probe organizer. Designed to sit under a modern digital scope, this organizer features drawers for 4 probes. Slots in the door fronts allow the…
You will need to order the unassembled or LP version, and desolder the USB connector from the amp board if you don't order unassembled. You will also need to solder the wires from the USB cable directly to the amp board. This uses 3.8mm…
To adapt our BIQU Hurakan to use H2 V2S REVO we need to adapt BIQU MicroProbe sensor using this universal BIQU MicroProbe for all H2 extruders series. Klipper configuration changes: [probe] ... x_offset: 4 y_offset: -32 ... [safe_z_home]…
oscilloscope probe holder Double sided tape is required for fix.
Hardware: If you are using all 20 probing arms: M3 Heatset insert x80 M3*6 hex socket machine screw x60 M3*10 hex socket machine screw x20 0.4mm accupuncture needles (8cm) x20 - same ones you'd find for cleaning 3d printer nozzles…
Drop in and Adjustable only change I had to make was my X had to be Changed to -35 from the default -28. Just be sure to double check! Will need 2 x M2.5 x 10 and 2 M2.5 nuts for mounting.
It is really useful that BTT have designed the Eddy probe to fit the original stock sensor on the Voron Stealthburner. Unfortunately the sensor is well and truly buried when the SB is assembled. Therefore at least the SB fascia has to be…
Bed leveling adjustment wheel nut lock Developed by MAXPROBE for Creality CR10 Smart Pro printers with the red metal leveling wheel nuts. These wheel locks are low profile and prevent the bed from self-adjusting or being accidentally…
Inspired by similar models on here, I made a holder that fits a Fluke 117 specifically. I imagine it would work with other similarly sized Fluke multi-meters (or maybe other brands that have a hook on the back too.) A separate probe…
Here you can find the last version https://www.printables.com/model/938796-sv08-cn3d-shroud-v3-extra-fan-magnets-klicky-led After making some tests we found that the klicky docking needs to be adjusted. all the test have been made using…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs In clinical simulations, providing the right equipment is crucial for students to effectively practice their…
This dock looks very jank but it works with Jon Harper's EVA 3 mod for the Mercury 1. I have only tested it on my Ender 5+ so unsure if the Pro will work with this, but if you have a pro try this if it doesn't work or is taking too much…
This is a remix of the V400 probe holder adding the T nut to fit the unique extrusions in this printer. Remove the top extrusion cover to fit this. You might need to loosen the screws for that extrusion in order to make it fit. This is a…
I wanted to reusing the PINDA probe (from my MKS 2.5S) in a voron-styled x-carriage remake. This allows you to mount the PINDA just like the other probe normally used in a Voron 2.4/Trident/etc. In my case, I'm using it to compliment the…
******************************** Update: I've added a cut out to mount an end stop as I personally need one and I like having the option available for others :) ********************************* This is a remix of Gulsifer's wonderful…
New nozzle to probe Y offset is now 21.65mm instead of 22mm.
I designed this as i already had an avalanche Probe but no clipstick before possibly spending the money on one. Features: ellipticaloptician 's plate (remixed) design allows you to place and retrieve quickdraws Fits many carabiner shapes…
You can use a z offset like -2.30, it's a standard for this braket. The firmware is already compiled and you can flash the printer easy, dont forgot to flash the display, it's easy. all files is included. The model it's easy to print, i…
The PCB Workstation with Needle Probes is a highly versatile tool for your electronic laboratory. Equipped with crane arms and high-quality stainless steel needles, this tool allows making precise and stable connections to the components…
Simple BLTouch/3DTouch/MicroProbe mount for your BIQU H2 V2S lite extruder. Assembly: Just use two washers between the fan and the mount (as seen in pictures) BL/3D Touch Offset: x: -32 y: +2 MicroProbe Offset: x: -29 y: +2 Printed…
A Gridfinity-compatible (2x5) bin for probes that come with the latest models of Fluke digital multimeters
Compatible with: Extruder: M3213 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10S Pro V2 and CR-10 Max Hotend: Micro Swiss All Metal Hotend Hotend Fan: 4010 Part Cooling Fan: 4020 Blower Probe: BL-Touch 3D Printer Model: CR-10S…
BDM probe mesh used to hold pen probes in place above PCB. PCB Fixture and clamp: https://aliexpress.com/item/1005001976489214.html BDM probe pen: https://aliexpress.com/item/33025727591.html Onshape document:…
This Voron StealthBurner Mount for the Biqu / BTT MicroProbe is designed to allow the MicroProbe to be mounted in the same location is an inductive probe. As a result no X offset is needed and the probe is well protected in the event of a…
Oscilloscope probe holders are stupid expensive, and are just 2/3rds of a tripod. So why not print a dead-simple version and call it a day? I made these to be just about as simple as possible and as widely-applicable as possible. The…
This is a version of the Euclid Probe Mount and Dock that is compatible with the EVA 3 carriage platform.
Contributo al sistema "Retractable_Probe_Dock for Klicky Probe e Quickdraw Probe" per Voron di "Tronfu" riadattato alla VzBot. Più che contributo, e un restyle estetico al modello di Eduardo Sousa ma modificando il sistema di regolazione…
I designed these to work with my Craftsman multimeter probes, they may or may not work for yours. The probes snap in so that they will not fall out. Printed without supports using 95A TPU. Do not print with PLA or any filament that is not…
This is a parametric multimeter probe tweezer. This parametric design shall fit all multimeter probes. Support material is required on the build plate only. An infill of 30% is recommended. This object's main web page is:…
I hate when wires get all tangled and kinked, and the stainless steel braided thermometers are especially bad. This model is for Trager style 3.5mm jack thermometer probes that have a silicone sock around the top of the probe. Holds the…
a toy ultrasound probe for medical professionals to use while explaining procedures to kids. also for use a a toy in order to normalize medical procedures so kids are more comfortable in the medical environment. THIS IS A TOY MODEL ONLY;…
I modified the Prusa MK3s R4 Extruder body to fit the 12mm probe. Print instructions Category: 3D Printer Extruders Summary I modified the Prusa MK3s R4 Extruder body to fit the 12mm probe.
this is a simple adapter from a crtouch/bltouch to a biqu microprobe. It uses the two m2.5x5 screws that come with the biqu microprobe and two m3x6-m3x8 screws. 4-20-2024 M2.5 screws didnt fit so i updated the design 4-20-2024 apparently…
Dragon Burner remix for BIQU MicroProbe. OnShape: https://cad.onshape.com/documents/60a28a4c34972125e94cdbc3 Offsets (from OnShape): X: 32.475 mm Y: -12.468 mm
These are realistic models of ultrasound probes commonly used in the emergency department for bedside ultrasound. They’re an excellent way for students to become familiar with probe handling before using the real (and expensive)…
Modified version of the 'Semi-Circular Anet A8 Fan Duct' https://www.thingiverse.com/thing:1954001 I have installed a new feeding tube which offset my nozzle to a lower point relative the original one and I have also installed an auto…
May 7, 2025: I added a version of the v2 model that used short M3 threaded inserts instead of the nuts. Edit: I have added a “Slim v2” model set that keeps the probe closer to the extruder and allows more room for the lever on the…
probe holder for the Onefinity CNC PLA Print as is no supports needed Pictures shown are at 0.28 µm layer height 2 walls / 15% infill
This is a magnetic holder for temperature sensors. You'll need a 8x4 or 8x3 mm magnet. There are three versions of the holder. The smallest one should work with sensors of ~4 mm in diameter, the middle one fits sensors of around 4.9 - 5…
Hey, checkout the (much improved) v2 of this model here: https://www.printables.com/model/497020-picoprobe-rp2040-zero-case-v2
The PCB Workstation Kit V1 with Micro Needle Probes is the ideal tool for hobby or professional work on small or medium sized electronic boards (PCB width from 10 to 156 mm). UPDATED: Now you can buy the much improved 2024 V2 kits at…
A compact mounting solution for a dual 5015 fan with clear nozzle view, and use of the original metal BL Touch bracket. I found the Pudgy fan duct and really liked the look of it but found that it could be improved in some areas. Part of…
--------------------2025.01.17 Update---------------------------- I want to apologize to @MDFPereira for my criticizing his attribution to the BTT repo. To my defense and clarification from @MDFPereira, it seems the mounts on the repo are…
I modified the Prusa MK3S+ R6 Extruder body to fit the 12mm probe. Upravil jsem tělo extrudéru Prusa MK3S+ R6 tak, aby se do něj vešla 12mm sonda.
Thanks to @QED_Maestro for his brilliant idea of simple tweezers for one handed measurements. Now optimised for BSIDE DMMs. Compatibility: A10 S10 S11 S20 not with S30 / S30X In the photo is the RC ;)
This is a multimeter probe holder for 4 probes. I have included the Fusion360 design files for easy remixing.
![M3201 Ender-3/CR-10 [Micro Swiss NG Extruder] - Fan Shroud and Probe Brackets](https://media.printables.com/media/prints/708060/images/5554855_c8f0442f-02a2-401d-a399-6c8e5d4b0216_3490802f-a225-4f60-a8a5-b4a7a32cb31d/image1.jpg)
![M3301 CR-10 / Ender-3 [Micro Swiss NG REVO Extruder] - Fan Shroud and Probe Brackets](https://media.printables.com/media/prints/752941/images/5875415_aef71d45-79a9-45ac-914c-33f9cabdee76_1b470434-8aec-41fc-a3f6-a048b3c0addb/ngrevoender3001_2400x2400.webp)
![M3213 CR-10S Pro V2 / CR-10 Max [Micro Swiss NG Extruder] - Fan Shroud and Probe Bracket](https://media.printables.com/media/prints/708204/images/5555713_8b7f26de-9baf-492a-88e8-974cc5c550c3_fc37e3b0-22ff-4c0a-b299-f9c920073f02/image1.jpg)
