Search results: psu

Sort order

3,245 models

P
Printablesraykamp

Prusa i3 MK3s black PSU replacement frame brace with M4 bolt holes

This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…

Downloads
11,350
Likes
450
Rating
4.94
P
PrintablesMaker_Deezay

Meanwell LRS/RSP PSU Bear Upgrade *New Version*

UPDATE!!!! Oct. 2020 I change the case a little bit and the upper and lower mount. If you print the old case and your mounts doesnt fit, you only print the mounts new. then it works. Sorry You need 2 x upper mount and 1 x lower mount.…

Downloads
975
Likes
72
Rating
4.9
P
PrintablesMichal Blazek

Nespresso Capsule Holder

Nespresso Capsule Holder - remodeled

Downloads
726
Likes
167
Rating
5
P
PrintablesGiantBrain

Quick Release PSU Connector Cover

Description Connector cover for PSU quick release - Original Prusa Enclosure This connector cover makes it much easier to disconnect the printer from the power supply, and it looks much better than the loose cables :-) You like my Work?…

Downloads
383
Likes
99
Rating
4.96
P
PrintablesJoFaTech

Nespresso capsules holder - Prusa MINI

Nespresso coffee capsule holder for Prusa MINI. I had to make this model because the original did not fit the mini. Just use some double-sided tape to attach it to the wall. Print instructions Print in PLA or PETG I used 15% infill for…

Downloads
248
Likes
22
Rating
5
P
PrintablesZexelon

ATX PSU Surface Mount Bracket / Support / Frame

A simple surface mount ATX PSU support frame. Works well with an EVGA 1000W PSU. Printed in PLA, more infill is better! 6x bolts (I think I used M6) required + ATX PSU mounting screws. Absolutely no warranty implied or given if you use…

Downloads
220
Likes
26
Rating
0
P
PrintablesGaius Pupus

Prusa XL - external USB power supply - PSU cover

I bought the stepdown USB modul on ebay. Search for “ stepdown USB modul ” an compare the images. I updated the part, the new board size is 19,2mm x 38,5mm Need one M3x6 screw. I mounted it on the right PSU, there is a free power port and…

Downloads
184
Likes
77
Rating
5
P
PrintablesCMF

NR200P ATX PSU Mount

A mount to allow an ATX PSU to be used in the NR200P case. This holds the power supply at the front of the case in front of the graphics card with space to allow the front panel IO cables through. It's based on the one you can download…

Print approx. €5.52–€6.74 excl. taxPreliminary estimate for one variant

Downloads
174
Likes
20
Rating
5
P
PrintablesAnia Kompa

Modular Cardboard Dollhouse Inspired by Nakagin Capsule Tower

I design 3D printed dolls and wanted to create a modern dollhouse for displaying them. The idea was inspired by Nakagin Capsule Tower. It's concept led me to design a flexible modular dollhouse. It is expandable structure, which can be…

Downloads
155
Likes
71
Rating
0
P
PrintablesBrian

Nespresso Vertuo Capsule Holder with 3 drawers

One piece version of the excellent Nespresso Vertuo Capsule Pod Dispenser by sdgsean. Modeled to support 3 slide out drawers of the original design (included here but is the same as the original model). Printed front facing side down with…

Downloads
152
Likes
13
Rating
0
P
Printablesinfn8

Nespresso Vertuo Capsule Dispenser - Dual large

Nespresso Vertuo Capsule Dispenser. This design holds two of the 61mm x 68mm boxes.

Print approx. €6.77–€8.27 excl. taxPreliminary estimate for one variant

Downloads
136
Likes
49
Rating
0
P
Printablesthiebes

Heart Shaped Box w/ hinges, encapsulated magnets (print-in-place, no supports, parametric design)

Printing instructions: Magnet encapsulation in PrusaSlicer is accomplished by pausing the print before the layer that covers them : Slice the 3mf file according to your preferences. Scroll to the first layer that will cover the magnets.…

Downloads
123
Likes
22
Rating
0
P
Printableskvlasblom

Black PSU holder - Alternative orientation

My enclosure doesn't have legs under it and sits on a desk. Therefore I wanted to place my black PSU on the back of the IKEA LACK enclosure with the terminal side of the PSU at the bottom. I based my dimensions on the existing model by…

Downloads
101
Likes
15
Rating
5
P
Printableshughs

Prusa Bear PSU Replacement Brace

After placing my Prusa i3 Mk3S Bear Upgrade in an enclosure I realised it would be better to remove the power supply unit (PSU) and place it outside the enclosure to improve cooling. I searched for a replacement brace but the Bear Upgrade…

Print approx. €5.36–€6.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
93
Likes
25
Rating
4.67
P
PrintablesTomas

NESCAFE DOLCE GUSTO CAPSULE HOLDER / SOPORTE PARA CAPSULAS DOLCE GUSTO NESCAFE

Two designs capsule holder for Dolce Gusto Nescafe coffe maker. Both are mobile, you can attach the base to the table with double-sided tape to allow the capsule holder to rotate on its own axis. The expandable design has 10cm height…

Downloads
88
Likes
16
Rating
0
P
PrintablesCC3D Projects

Illy Iperespresso Capsule Stand

Hey there! Check out my website to see the latest products I've designed—now available for you! Don't miss out, hit the link and explore what's new! My Shop: https://buymeacoffee.com/cc3dprojects/extras My Website:…

Downloads
81
Likes
4
Rating
4
P
Printablesflakestyle

Goming LED PSU Cover

(English below) Für ein LED Projekt habe ich bei Amazon ein 100W 24V LED Netzteil gekauft, welches aber viel Spielraum für “Unfälle” bietet. Link: Amazon DE Um das Risiko zu minimieren und um das Netzteil einfach hinter dem Schrank liegen…

Print approx. €3.25–€3.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
74
Likes
11
Rating
0
P
Printablesaaronp18

Nespresso Vertuo Plus Replacement Capsule Container Krups XN900 MS-624276

I picked up a second hand Nespresso Vertuo Plus which was missing the rear capsule catching container so I decided to print one! My print bed is 210mm so it doesn't quite reach the top, but that's ok, capsules still fall in correctly. I…

Downloads
60
Likes
5
Rating
0
P
Printablesonkelpit

Prusa Mini PSU Holder Mean Well 24VDC/6.67A

Just my design of a PSU Holer for the Prusa Mini. Mounted the PSU on my IKEA Lack Enclosure. Could be used as Holder for many more things. Print instructions I used black Geeetech PLA with the 0.25 DRAFT settings from PrusaSlicer on my…

Downloads
53
Likes
7
Rating
5
P
PrintablesAleks89

Delizio Coffee Capsule / Delizio Kaffeekapsel

Needed a model for a project which is more solid than the real coffee capsule. So this is what I've created :-)

Downloads
52
Likes
5
Rating
0
P
PrintablesFokieH

Lenovo Netzteil Halter / PSU Holder

Ein Modell um ein Lenovo 65W USBC Netzteil unter dem Schreibtisch zu montieren. Der Halter wird per Schrauben oder mit doppelseitigem Klebeband an der Unterseite des Schreibtisches befestigt. Das Netzteil kann dann seitlich eingeschoben…

Downloads
50
Likes
5
Rating
0
P
Printableskorqie

Elektron Digitakt PSU - Under desk mount

Custom-designed under desk PSU mount for Elektron Digitakt, allowing you to securely attach your Digitakt power supply unit (PSU) underneath your desk. Settings: layer height: 0.2mm Infill: above 15% Required: x2 screws of proper length

Downloads
44
Likes
10
Rating
0
P
Printablesclement0635

Black PSU horizontal supports for IKEA Lack enclosure

This pair of supports is designed to fit the Black PSU of the Prusa i3 MK3S+. You'll need 6 wood screws of maximum 6mm diameter in order to secure it. There's a 3cm gap between the top of the PSU and the bottom of the table for 2 reasons:…

Downloads
43
Likes
10
Rating
5
P
PrintablesFokieH

MK4 & MK4S Netzteil / PSU Replacement

Hier findet Ihr Modelle eines Halters der das Netzteil ersetzt und entsprechend für die Stabilität am Drucker sorgt und gleichzeitig die elektrische Verkabelung beinhaltet. Auch Dabei ein Halter für das Netzteil selbst, um es Außerhalb…

Downloads
37
Likes
14
Rating
5
P
Printablesjcieslak

LW-PLA Dual Egg Capsule for Model Rocketry NRC Competition

A Dual Egg Capsule (2 eggs) for Egg Loft Altitude events, specifically designed to be printed with LW-PLA. Modeled and created to fill a need for rocketry hobbyists as no commercial Dual Egg capsule kits are available. Foaming LW-PLA can…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
1
Rating
0
P
PrintablesHamar József

standing Nespresso caffee capsule holder 2 line

standing Nespresso caffee capsule holder 2 line with cut out for easier use.

Downloads
17
Likes
4
Rating
0
P
PrintablesChris Vahi

Bottom Cover for Seeed Studio ATX PSU Breakout

I've been using the Seeed Studio ATX PSU breakout board for a while now and nearly had an incident by leaving the board floating around the desk with lots of metal bits around. I decided to make a simple cover for the bottom to prevent…

Downloads
17
Likes
5
Rating
0

PSU-lock bewegen, wenn PSU-handle verbaut ist

Um einen PSU-lock zu bewegen habe ich mit OpenSCAD ein Tool gebastelt, dass den PSU-lock aufnehmen kann und einen Knopf dazugestellt, damit die Finger nicht abrutschen. <…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
17
Likes
1
Rating
0
P
Printablesmach

PSU Poke Protection

Simple PSU cover. Prints without support. For use with 3mm countersunk screws.

Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
4
Rating
0
P
PrintablesDvid59

support décapsuleur

SUpport de décapsuleur fait pour graver sur la xtool M1 des décapsuleurs en bois

Downloads
6
Likes
2
Rating
0
P
Printablesflavio blanco

Montura porta capsula 16 mm reemplazo original electrec BM-800 plano horizontal

Montura para capsula TSB-165A de 16mm del micrófono BM-800. Permite el cambio de plano del micrófono de vertical a horizontal, mediante el reemplazo de la montura original. Impreso con Biqu B1, boquilla de 0.4, PLA, capa de 0.2mm, 30% de…

Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant

Downloads
2
Likes
0
Rating
0
P
PrintablesPrusa Research

Basic Board + PSU Add-on Printable Parts

All printable parts for your Basic Board + PSU Add-on. Basic Board + PSU Add-on is needed only if you have Advanced Filtration System or/and White LED Strip Add-ons You have the option to print two different holders for two different…

Downloads
12,656
Likes
420
Rating
4.88
P
PrintablesMintax

Custom Nespresso Capsule Dispenser

Inspired by commercial products and self-made solutions, I decided to design and print my custom version of a Nespresso capsules dispenser. It wanted it to be nice to look at, functional and simple at the same time. What you see here is…

Downloads
11,168
Likes
2,104
Rating
4.92
P
PrintablesMeister Edel

EDC Container Box Capsule + O Ring

--- latest Update: Salt & Pepper Insert! --- Since the camping season is starting again I designed Inserts to use the Container for Salt & Pepper or sth. like that. Also I did minor improvements to all parts. --– Printed O-Rings (TPU) ---…

Downloads
9,387
Likes
3,450
Rating
4.94
P
Printablessquinn

Waterproof Capsule

This small capsule can be used as an EDC accessory case, providing a convenient way to store and carry matches, pills, batteries, or other small items. Included in the design is a looped top, allowing you to conveniently attach to a…

Downloads
5,531
Likes
1,866
Rating
4.94
P
PrintablesDFV Tech

Nordic Knurled EDC Capsule

Keep your small essentials organized, safe, and stylish. This 3D printed EDC (Everyday Carry) container is designed with a focus on tactile feel and rugged utility. The detailed knurled texture not only provides an excellent grip—even…

Downloads
5,375
Likes
1,737
Rating
4.77
P
PrintablesPRIma

"TANK" rugged Capsule

introducing “TANK” the small but heavily rugged capsule/container for any kind of outdoor usage. waterproof against rain when using O-ring with dimension 3.5mm x 31.7mm (ID). I have included some STL- file of such ring for reference but…

Downloads
5,096
Likes
1,681
Rating
4.89

Capsule Corp. Keychain

A Keychain of the Capsule Corp. Logo from Dragon Ball/Dragon Ball Z/Dragon Ball Super Saga's. This model is specifically made for Glow in the Dark elements but can take any color or themo-platics you want. Just keep in mind that different…

Downloads
3,651
Likes
24
Rating
0
P
Printablesjk_printer

Ender 3 Pro low-profile rear mount for Meanwell PSU

Updates 03/2022: Changed two screw holes on the switch side part to slotted holes (v2.1). This allows you to tune the fit and tension during assembly. 04/2021: Added a "MIRRORED" version, which allows you to flip the PSU around and have…

Downloads
3,549
Likes
503
Rating
4.76
P
PrintablesD6ta

Nespresso capsules holder

Nespresso capsules holder

Downloads
3,506
Likes
512
Rating
4.84
P
Printablestimqui

Power Supply (PSU) fan silencer (Ender 3 & 3 PRO)

This is improved and re-modelled model inspired by https://www.thingiverse.com/thing:4251317 = basically cutted out useless centre and fixed the height of the inner fins (rungs). Rovanni (author) was even inspired by me and modified his…

Downloads
3,433
Likes
446
Rating
4.92
P
PrintablesMikolas Zuza

PSU replacing brace for MK3

If you remove the PSU from your MK3 (for example to place it outside of an enclosure), you can use this brace to maintain the frame stiffness. This was tested with the older silver PSU mount Print instructions Prints without supports

Downloads
3,232
Likes
192
Rating
4.89
P
PrintablesMichal Blazek

Nespresso capsule holder

Small Nespresso capsule holder. Two variants - for 24 pcs (only Part 1) or for 48 pcs (Part 1 and 2). You can remove the cover and fill the capsules into the holder body. Print instructions Printed with Prusament PLA, without supports.

Downloads
2,989
Likes
399
Rating
4.86

Ender 3 Pro PSU (Meanwell LRS35024) Fan cover/silencer

A PSU Fan cover/silencer for the Creality Ender 3 Pro / Meanwell LRS-350-24 PSU This model was designed to print the models separately in different colors and fit the embossed letters into the debossed fan cover. If the embossed “GHOST”…

Downloads
2,792
Likes
32
Rating
0
P
Printablesmasemenonasaku

Capsule Planter

A beautiful flower pot permeated with a organic double wall voronoi outside shell. This wonderful art decor is also ideal as a gift and as decoration everywhere an eye-catcher! I have printed it with 5 layers and the pot was waterproof. I…

Downloads
2,695
Likes
724
Rating
4.71
P
Printablesmakerunit

Mini ITX Case - ATX PSU

3D Printable Mini ITX computer case. Full build video: https://youtu.be/WKnhARips-w Features: 2-slot Graphics Cards up to 270mm (about 40mm thick) Bottom to top ventilation Mounts for ATX power supply (depth max 125mm) Mounts for 3.5" HDD…

Downloads
2,583
Likes
626
Rating
5
P
PrintablesZMASLO

AMD BC-250 Case ATX PSU & Fan Duct

I modified an existing project. I added a fan mount on the front of the BC-250 board and also modified the case front to make everything fit. The idea was to not destroy the fins of the original BC-250 cooling. Additionally, I recommend…

Downloads
2,450
Likes
134
Rating
4.4
P
PrintablesPeter

Nespresso capsule holder

This is a capsule holder I designed to be glued to a the side of a Nespresso coffe maker. It holds 3x5 capsules. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Notes: No supports required, print on flat side.…

Downloads
2,324
Likes
350
Rating
4.96
P
PrintablesravingDIODE

Nespresso Capsule Holder / Stand (Triangular - 15 Capsules)

My wife needed a Nespresso Capsule holder that was small and did not take up much space, so I designed this one for her. She was very very happy with it! This Capsule holder takes 15 standard Nespresso capsules or Nespresso compatible…

Downloads
2,020
Likes
212
Rating
4.89
P
PrintablesAdRilUtiOn

Nespresso capsule dispenser

My version of a nespresso capsule dispenser. If you need it , print it ! :-) Happy printing. Printing advise: None realy. I used PLA, 15% infill and no supports. For the loop use a brim.

Downloads
1,923
Likes
294
Rating
4.81
P
PrintablesMordiev

Pill Capsule Filling Tray

Sizes that have been tested and confirmed to fit. Size 000 Size 00 Size 0 Size 1 Size 2 Size 3 Size 4 Sizes I have not yet tested I pulled the size specs off the web but you will have to test the actual fit and function yourself. Please…

Downloads
1,749
Likes
172
Rating
5
P
PrintablesRettex31

Mean Well LRS-200-24 PSU Cover

I designed this PSU cover for the Mean Well LRS200-24 PSU. The model files contain one “normal” cover and one with the VORON Design logo (i originally designed this cover for my VORON v2.4). EDIT: Dualcolor version available

Downloads
1,735
Likes
174
Rating
4.92
P
PrintablesBaGooN

PC PSU Cable Combs

I couldn't find a cable comb that suited my taste, so I designed it. Print settings: Filament: PETG (I recommend against using PLA due to its potential for deformation caused by heat.) Layer height: 0.2mm Supports: no Perimeters: 3 Notes:…

Downloads
1,732
Likes
310
Rating
5
P
Printables3DMegoldasok

SFX to ATX PSU Adapter Hole/Honeycube Mesh

I make it for my Fractal Design Define Nano S PC case Print from PETG/ABS/ASA/HT-PLA Walls: 4-5 Infill min 30% UPDATE!! NOW NEW Honeycube Mesh Variant!!

Downloads
1,711
Likes
102
Rating
5
P
PrintablesDFV Tech

Ultimate Two-Color EDC Capsule

This sleek EDC (Everyday Carry) capsule gives you stunning two-tone aesthetics using a brilliantly simple snap-fit design. Whether you're organizing your desk, building a survival kit, or just need a stylish keychain stash, these…

Downloads
1,636
Likes
747
Rating
4.79
P
PrintablesHankoTom

PSU relocation Ender 3 Pro

If you've ever thought of upgrading your printer to dual Z drive, you've probably run into the problem that the power supply is in a very bad place. This simple little model will help you move the power supply under the heated bed. It…

Downloads
1,635
Likes
275
Rating
4.94
P
PrintablesDeltaprints

Wavy design Nespresso capsule holder & organizer

This modernly designed Nespresso capsule holder is simply too good to not want to have at home. It holds a maximum of 21 capsules, stands securely without taking up too much space, and is quick and easy to print (no supports required).…

Downloads
1,552
Likes
203
Rating
5
P
Printableschriszf

Minimal Case for BC250 and Flex PSU

A simple, toolless case for the BC250. Who knows how bad the thermals are! Printed in PLA, it's probably fine. The build assumes the center fins of the card have been opened up to accept a fan. BOM BC250 APU Board Flex PSU with…

Downloads
1,532
Likes
81
Rating
5
P
PrintablesCube_Tech

PSU DIN rail mount

it contains 2 mount versions, one with 50mm hole spacing and one with 55mm hole spacing.

Downloads
1,467
Likes
209
Rating
5
P
PrintablesTenthrow

Nespresso Vertuoline Pod Capsule Dispenser / Holder for new Packaging

Nespresso changed their packaging on the virtuoline capsules without warning and made the old capsule holders worthless (the ones that hold the cardboard inserts) so I offer this version that works like the Classicline holders that you…

Downloads
1,446
Likes
188
Rating
4.79
P
PrintablesJapple

Sovol SV06 PSU Fan Silencer

If you've ever been in the same room as a Sovol SV06, you'll know that the stock PSU's fan is one of the noisiest parts on the machine. With this simple addition, you can make your printer much more pleasant to be around. It significantly…

Downloads
1,437
Likes
218
Rating
4.68
P
PrintablesControforme

PC open frame case / test bench for mini ITX motherboard, ATX or SFX PSU

PC test bench / open frame PC case Changelog 2023-06-28: Fixed the position of the PCIe slot screws. New file name: “ITX base -_bottom v2.stl” 2023-12-04: Fixed height of PCIe bracket (thanks @sonicscrewfu for the feedback) 2025-01-06:…

Downloads
1,370
Likes
160
Rating
5
P
Printablesroblpetty

Ender 3 V2 External Electronics box (MeanWell PSU and Motherboard) Improved

IMPORTANT : this model is about 20mm longer than the ender 3v2 print bed. So you will need to print this on a different machine or alter the model before printing. If you don't want to do that you can take a look at my original version…

Downloads
1,359
Likes
283
Rating
5
P
Printablesvranisimo

Dolce Gusto capsule holder- improved version

This is an improved version of Dolce Gusto capsule holder: https://www.thingiverse.com/thing:2847560 You will need: 1x base (0.20 layer height or above) 1x ring 6x capsule holder Depending on the total height you want: 220 mm height…

Downloads
1,356
Likes
201
Rating
4.78
P
Printablesgrizzie17

60mm Exhaust Fan Silencer Flowmaster (PSU) Ender3/Neptune[2,3]/Others

Exhaust Fan Silencer that was inspired by the Flowmaster muffler design. I know that it looks kind of hokey, but it's hard to argue with the results. The folks at Flowmaster really know what they are doing with muffler design. This Fan…

Downloads
1,323
Likes
211
Rating
4.92
P
PrintablesDrewDeeDoo

Anycubic Kobra 2 Silent PSU Kobra 2 pro Meanwell Kobra 2 plus Kobra 2 max Kobra 2 max

Upgrade your power supply fan to 92mm and make it SILENT! -Use a 24V fan or use buck converter to step down to 12V: https://a.co/d/c0GqEZc 92MM fan: https://a.co/d/44JLwyI Black is ground, Yellow is positive. You don't need the other two…

Downloads
1,322
Likes
232
Rating
4.91
P
PrintablesRiverRaid

Wall mounted, mug shaped Nespresso capsule dispenser

I wanted to design a stylish capsule holder for my Nespresso machine and came up with this idea. Started to sketch in Fusion 360. Later, i searched thingiverse, if something similar exists already and found this:…

Downloads
1,312
Likes
262
Rating
4.94
P
Printableslamer house

Hatshepsut Sphinx at The Metropolitan Museum of Art

Hatshepsut Sphinx at The Metropolitan Museum of Art

Downloads
1,298
Likes
75
Rating
4.83
P
Printablese-weiler

Black-PSU holder

You can mount the PSU at the side, so you be able to stack multiple enclosure on top of each other.

Downloads
1,297
Likes
80
Rating
4.91
P
PrintablesMATB

Soccer Football Ball Capsule

ball soccer shaped capsule for multicolor printing recommended parameters: -wall 3 - 4 -supports 60° -infill 20%

Downloads
1,277
Likes
121
Rating
4.89
P
PrintablesTmpx64

Airtight Capsule - Camping and Hiking - Portable Pill Case - Survival - Outdoor container

This airtight capsule offers a reliable solution for safely storing essentials like pills, matches, and small tools, keeping your belongings secure in any environment. Compact, durable, and versatile, it’s the ideal companion for camping,…

Downloads
1,260
Likes
298
Rating
5
P
PrintablesSvechinskaya

Ender 3 PSU fan silencer

This muffles the noise from the PSU fan. Remove one screw at a time (If both PSU screws are removed at the same time, the internal fan will fall into the PSU). Print instructions Supports are not needed if you have good part cooling…

Downloads
1,256
Likes
140
Rating
4.81
P

UCG-Fiber PSU 19-inch Modular Rack Mount

A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi UCG-Fiber Power Supply Unit (PSU). This model comes in 4 variations: A plain mount, just for the PSU. A version with keystone slots. A version with a shelf. A version with the…

Downloads
1,252
Likes
96
Rating
5
P
Printablessdgsean

Nespresso Vertuo Capsule Pod Dispenser

Nespresso Vertuo Capsule Drawers! Inspired heavily by the two models mentioned below, I married their concepts into one amazing Nespresso Capsule dispenser. The pictured product features 4 drawers, but you can print as many or as few as…

Downloads
1,232
Likes
272
Rating
5
P
PrintablesErer2001

ITX PC cube case with sfx PSU

The case is 5.4 liters. It's shaped like a cube because it can easily be printed on basically any printer COMPATIBILITY: Mini ITX motherboard Single slot low profile PCIE card 70 mm CPU cooler clearance (Arctic passive & AMD Wraith Spire…

Downloads
1,228
Likes
218
Rating
5
P
PrintablesRav Meimad

Nespresso coffee capsule holder

For all the nespresso coffee capsules users Print Settings Supports: Yes Resolution: 0.2mm Infill: 15% Filament: Fillamentum Pla Extrafill Category: Kitchen & Dining

Downloads
1,200
Likes
170
Rating
5
P
PrintablesEl Flecko

Snapmaker U1 Improved PSU and Motherboard Cooling - with CAD-Files

Fan Duct for the PSU and the Mainboard of a Snapmaker U1 to improve the cooling and isolate the cold air flow from the chamber. I also publish my CAD (FreeCAD) and STEP files for further remixing Printed with ABS for heat resistance.…

Downloads
1,171
Likes
269
Rating
4.43
P
Printablesstassek

MK3S black PSU holders

MK3S black PSU holders (top/bottom part) for IKEA lack. To fix the PSU in there are no screws needed, just slide the PSU between the parts.

Downloads
1,166
Likes
144
Rating
4.9
P
PrintablesDaVinci2000

Ender 3 PSU rear mount

A set of brackets to move PSU from the side to the rear of Ender 3. Does not fit Pro or V2 . UPDATES: Alternative version 2.0 to be mounted with M5 bolts screwed into tapped holes in openings of profiles. Check if you have those holes…

Downloads
1,163
Likes
258
Rating
4.76
P
PrintablesLopatka

Mercury Capsule

Humans began flying in space over 60 years ago. In April of 1961 Yuri Gagarin of The Soviet Union Air Force was the first followed by Alan Shepard of The United States Navy in May. Shepard flew in a Mercury capsule on top of a Redstone…

Downloads
1,132
Likes
171
Rating
4.93
P
PrintablesLyl3

Ender 3 and Ender 3 Pro Fan Silencer Shrouds for PSU

E nder 3 and E nder 3 Pro Fan Silencer Shrouds for PSU These are fan silencer shrouds for the Ender 3 and Ender 3 Pro power supply fans . In the pictures, the Ender 3 shrouds are yellow and the Ender 3 Pro shrouds are purple . They attach…

Downloads
1,124
Likes
126
Rating
4.95
P
PrintablesKugas

DOLCE GUSTO CAPSULE DISPENSER

Very simple and functional dispenser allowing you to store 3 different types of coffee or cappuccino or not. The idea came up after seeing the absurd prices they ask for an item like this and also because of my stubbornness, I wanted to…

Downloads
1,122
Likes
124
Rating
4.77
P
PrintablesKalleKnall

MK3 PSU Bracket / Brace

Just an other Prusa MK3 PSU-Bracket / Brace. My Frame has a Skew-Value of 0.01 ! (Support Menue) Please have a look on my other Prusa MK3 Prints https://www.prusaprinters.org/social/1247/prints It fit's between Mainframe and Rearplate,…

Downloads
1,112
Likes
132
Rating
4.7
P
Printablesgennro

BC-250 ATX PSU Bazzite Box

BC-250 Case that uses a standard ATX PSU. Requires 8 coarse thread PC screws, 4 for the PSU, and 4 to hold the case together. Leave the IO shield bracket on but remove the tiny metal bracket on the front for this case. The power button is…

Downloads
1,110
Likes
63
Rating
4.5
P
PrintablesMorzax

Rugged Capsule

New original designed Rugged Capsule Filament used: Prusament PLA - Army Green & ESUN PLA Black In-fill: 15 % Support suggestions Support on build plate for the Capsule Support inside the thread and overhang of the hanger for the lid

Downloads
1,105
Likes
341
Rating
4.57
P
Printablesczargb

Delta PSU (black) Prusa MK3S Lack Enclosure parts

The Prusa MK3S is now shipping with an all new black power supply. This power supply has slightly different dimensions than the previous one. In order to relocate the power supply out of the LACK enclosure to the lower table we can no…

Downloads
1,098
Likes
88
Rating
4.77
P
PrintablesJarda K 66

Dolce Gusto Capsule Holder

Držák na kapsle Dolce Gusto

Downloads
1,048
Likes
111
Rating
5
P
PrintablesTmpx64

Medical Pill threaded Capsule - Gift idea - the original - the daddy - screw pill box

Great for festivals and concerts to carry earbuds, keep your tokens safe or simply use as a portable ashtray. Excellent conversation starter. Height: 10cm / Diameter: 3cm If you’d like to support my work, leaving a ♡ like ♥ or even buying…

Downloads
1,020
Likes
247
Rating
5
P
PrintablesJakub Kříž

Compact Capsule Filler (00 size) with Credit Card Mixture Dispenser

Compact Capsule Filler with Credit Card Mixture Dispenser This compact capsule filler is designed to fill 24 capsules of size 00 in one batch using a credit card as a mixture dispenser. The capsule filler is made up of three functional…

Downloads
1,020
Likes
109
Rating
4.8

Print In Place Cyberpunk Capsule

Each model was printed on my P1S with 5% infill, 2 walls, and .2mm layer height. I have printed each model multiple times using different types of filaments with varying results. Printing with matte filaments had the best results, making…

Downloads
1,011
Likes
220
Rating
4.75
P
Printablesdjedje_zr7

Nespresso Coffee capsule Dispenser (Pisa Tower)

Kitchen set part 3 : Coffee capsule Dispenser (Pisa Tower) Make your your coffee tastes more Italia Compatible with all diam. 37mm capsules (Nespresso, Doce Gusto,...) 3 dispensers holes Fill the capsule tower from above Print as many…

Downloads
1,005
Likes
273
Rating
5
P

Bench Power Supply with ATX PSU (w/ XH-M229+SK35)

The model that brotherchris made with the XH-M229 switchboard was fine, but it didn't include an adjustable unit, so I modified the model a bit and integrated the SK35 (XYS3580 can also use) buck/boost converter case prepared by fjkraan…

Downloads
996
Likes
108
Rating
4.67
P
PrintablesRipe3D

Flex Atx to Atx PSU adaptor plate

Flex ATX to ATX PSU adaptor Plate. The Horizontal orientated adaptor is also compatible with 1u PSUs. Allows you to fit a Flex ATX power supply onto standard ATX PSU mounting points. Please select the required Orientation. Each Adaptor…

Downloads
989
Likes
47
Rating
5
P
PrintablesAndersNygaard

USB-C portable adjustable PSU DSP5005

Update! Due to popular demand i have released the step files for easier modification. Parts: Psu module: https://s.click.aliexpress.com/e/_oDMk7jQ USB-C pd board: https://s.click.aliexpress.com/e/_oDtVUnE Banana plugs:…

Downloads
970
Likes
1,054
Rating
4.67
P
Printablesheron

ATX PSU bracket for 10 inch rack

NEW VERSION HERE 2U plate to mount a full ATX power supply in a 10 inch rack cabinet. Do not print in PLA. The heat and the weight WILL eventually deform it. Requires a 10"+ build plate (254mm). A Prusa i3 or an Ender 3 is not big enough.…

Downloads
900
Likes
142
Rating
4.86
P
PrintablesTheYungZ

Tooth capsule (for the tooth fairy)

One of my kids recently lost his tooth, but we were out of plastic bags so I made a tooth shaped container for him to put it in. He was very stressed about how the tooth fairy was going to pick up his tooth, and this ended up being the…

Downloads
893
Likes
129
Rating
4.6
P
PrintablesNoWayCall

Gashapon Capsule Ball

Goes into Tomy Gacha gashapon vending machine

Downloads
884
Likes
42
Rating
4
P
Printablesckth

Ender 3 PSU Cover

Originally on Thingiverse : https://www.thingiverse.com/thing:5036589 This replaces the original black cover on the PSU's for Creality Ender 3 (non-slim version). The PSU will stay mounted where it is originally, but the power cable now…

Downloads
880
Likes
166
Rating
5
P
PrintablesReso

MK3S+ black PSU replacement brace

I changed it a little. Added the hexagons for looks and a small chamfer around the model. Printed the brace with 30% infill. G-code is with standard Prusament 0.20 profile for PETG.

Downloads
872
Likes
125
Rating
4.9
P
PrintablesMotbrok

Dolce Gusto Capsule Holder (Nescafe)

Modular The cupholder is modular and you can stack the module vertically as high as you want. To have a nice finish there is a top that you can optionally add. Installation The system is not fixated by itself, and is meant to be fixed to…

Downloads
861
Likes
136
Rating
4.83