Search results: pusher

Sort order

447 models

P
PrintablesHD_Creator

Folding propeller for pusher and tractor planes

Application This is a high performance 6x3 propeller for RC model airplanes. The 6 means it has a size of 6 inch in diameter (roughly) and the 3 means that is has 3 inch of average pitch. Thanks to the straight form, without the usual…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
838
Likes
103
Rating
5
P
PrintablesM

12mm Pixel Pusher

For use with the bases at https://www.printables.com/model/429098 use this to push pixels without blisters or agony. I don't have enough drill presses for a work party, but these will get the job done. Way cheaper and better than a socket…

Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant

Downloads
104
Likes
15
Rating
5
P
Printablesmiszkolc

Whoop main board cover invert/pusher mod

1.13g cover for inverted (pucher moded) tinywhoops main boards. (Designed for Betafpv meteor 65 but it should fit to most brushless tinywhoops) printed on I3 MK3s+

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
2
Rating
0
P
PrintablesCurtAssWil

Groundhog Stake Pusher

Remix of @lukfilipsk stake pusher.

Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
45
Likes
5
Rating
0
P
PrintablesTinyTexas

LW-PLA/PLA RC Plane - Pusher Propeller (PProp)

Hello There! This Pusher Propeller ( P-Prop ) Plane is a model designed with the goal of being close to 100% vase mode printing and is capable of being printed in both LW-PLA and PLA. (UPDATE 2/5/2023): A new wing design with support for…

Downloads
3,285
Likes
452
Rating
5
P
PrintablesBounet

Bambu X1 clog pusher

Had my first clog on my Bambu X1 and realized it was not an easy task to clear it as is :) Jump into cad 10 min later my Prusa Mk3s saved the day! How to use it: Undo the hot end when cold, you don't want the fan running as it can touch…

Downloads
2,158
Likes
516
Rating
4.98
P
Printablesbagel

Minimalist toothpaste squeezer / paste pusher

Ultra minimalist toothpaste squeezer design that's plenty strong! Works great for other things like facewash, lotion, etc. Measure the width of your tube at the end to make sure you choose the right size (there are 4 to choose from…

Downloads
1,964
Likes
177
Rating
4.86
P
PrintablesBalu

Multiboard Flush Snap Pusher

Since the new Flush Snaps are a little flimsy, it can be difficult to push them into their Multiboard counter parts - especially if you chose the tighter versions. So I made this little tool to help with that. Print settings I print these…

Downloads
1,614
Likes
153
Rating
5
P
Printablesbagel

Totoro toothpaste squeezer / paste pusher

This is a simple Totoro-themed toothpaste squeezer. The opening is 60.62mm wide. The model is 117mm wide, 70mm tall, and 4.5mm deep. Add a couple extra walls to print the design faster (and for added rigidity). This is based the opening…

Downloads
1,405
Likes
182
Rating
4.83
P
Printablesthrutheframe

Bambu Lab X1C Clog Pusher Remix

I like the design of Bounet's clog pusher. I wanted to include a ptfe tube within to help guide the filament when doing a cold pull to clear out the clog. I designed 2 versions to have the 2 screws secured by either nuts or brass inserts.…

Downloads
1,165
Likes
350
Rating
4.78
P
PrintablesLukasz Filipski

Aluminium Tent Stake Pusher/Handle

This is a simple solution to issues associated with trying to push small aluminium tent stakes into the ground - and getting your palms cut due to small surface area of the stake, or deforming them if using a hammer. This simple tool…

Downloads
827
Likes
90
Rating
5
P
PrintablesJori

Universal "Button pusher" SG90, MG996R

... this is the perfect digital to analog interface for mechanical engineers! Consists of a "button pusher arm" and a bracket to hold down the servo. I used two of these to automate my coffee maker: first servo pushes power button, a…

Downloads
761
Likes
59
Rating
5

The Pusher

When downloading, do not forget that you do not need to click Download All, because in this case you will get a 404 error, because the site is broken and no one is going to fix it. Download files one at a time by clicking Download each…

Downloads
688
Likes
239
Rating
5
P
Printablessoulrider911

Sight pusher for Glock V2

This is a sight pusher for Glock Slides. This device will hold the slide in place and allow pushing the sights off a Glock Upper Slide. You will need the following hardware: 4x 5/16 Nuts 1x 5/16 3.75-4" Bolt 1x 5/16 1.25-1.5" Bolt…

Downloads
654
Likes
110
Rating
0
P
PrintablesAAME

PiXeL - Micro fpv drone racer frame - tiny whoop pusher style

I tried to design an indestructible frame taking advantage of Prusa XL multi material print capabilities. My configuration: LIPO: 2S 450mah FC: Flywoo GOKU F405 HD 1-2S ELR AIO V2 Motors: HGLRC SPECTRE 1202.5 Motore Brushless 11000KV…

Downloads
611
Likes
117
Rating
5
P
Printablesiggy

WC pusher plate - Geberit Sigma compatible | Drückerplatte

WC Pusher Plate (Drückerplatte), compatible to Geberit Sigma I accedentaly bought a Delta pusher and had to fit it to a Sigma backend. Instead of returning it and getting a fitting (and more expensive one) I made a Sigma-compatible pusher…

Downloads
599
Likes
38
Rating
5
P
PrintablesFlops

True Hybrid Dart Pusher for Nerf Stryfe

A printed Pusher so your Stryfe or other compatible Blaster can shoot Half- and Full lenght Darts. Print this flat agianst the Bed. A 0.2 layer height should be suffiecent. 2-3 Walls/Perimeters and 10-20% Infill. I printed mine out of PC…

Downloads
564
Likes
71
Rating
4.67
P
PrintablesRene76

RC Dutch pusher boat "Opduwer"

This is my new project: a pusher boat, or a Dutch "opduwer" from 1927. "Opduwers" come in various shapes and sizes. https://nl.wikipedia.org/wiki/Opduwer The pusher is on a scale of 1:10 and is approximately 60cm long. The design isn't…

Downloads
541
Likes
76
Rating
5
P
PrintablesRobertoooo

Creality CFS Roller Bumper / Pusher / Tensioner / Adapter for better spool stability

This add-on improves the filament retraction of the spool in Creality CFS, by eliminating the friction between the factory bumpers and the spool, which can become problematic as spools get lighter with less filament on them. Also no more…

Downloads
538
Likes
131
Rating
5
P
PrintablesFloatingBoater

Rada Push-button shower button-pusher

This design is a clip that fits over a rada mechanical shower timed valve and keeps the water flowing without having to keep pressing the button. The cap fits over the button, press, and turn to lock onto the water pipes. Simple,…

Downloads
525
Likes
24
Rating
4
P
PrintablesMatschi

Toothless Pastepusher

This is a Remix of the great "Paste Pusher Animals" by makeplace and my own "Toothless-cookie-cutter" It was kinda requested by marianok . Thanks for the inspiration ;) Use the "smaller" Version. It fits 4cm wide tubes Let me know if…

Downloads
474
Likes
63
Rating
4.75
P
Printablesgargunkle

Shirdal P4 Nerf Gryphon Remix -> normal geared pusher

If you're interested in a prebuilt or custom blaster build, please check GryphonsAndMore on Etsy! This is sort of hard to explain. The Gryphon is a “nerf” style foam blaster by Flygonial. There is a remix called Shirdal P4 by Skwiggums.…

Downloads
438
Likes
86
Rating
4.8
P
PrintablesSirPrintsALot

SwitchBot Bot Button Pusher Reference Model

Used this model as a reference when making a case to hold my SwitchBot button pusher like this one: https://www.printables.com/model/681036-switchbot-button-pusher-case-for-liftmaster-811lm-

Downloads
436
Likes
43
Rating
0
P
PrintablesFrank Wiebenga

Button Pusher for Maslow 4 CNC

This 3D printable Button Pusher can be inserted into the base of the Maslow4 in the half-moon shaped gap. It will hold down the button on the router so that you can change the bit.

Downloads
436
Likes
19
Rating
5
P
PrintablesStantaun

Y and V Tent Stake Pusher

A tent stake pusher that was inspired by the Aluminium Tent Stake Pusher/Handle; I re-designed the piece to be compatible with both 90 degree V style tent stakes as well as the groundhog style Y stakes as I like the freedom to use both…

Downloads
382
Likes
29
Rating
5
P
PrintablesMarcusInCo

WS2811 MegaTree Strip Pixel Pusher Block

I got tired of the sore hands, so made a quick block to allow me to push ws2811 pixels into megatree strips. I added support under where you push in the pixel which made it a good bit easier to push. Uses ¼-20 countersunk screws to attach…

Downloads
367
Likes
34
Rating
0
P
PrintablesMichael

Glock Sight Pusher Installation Tool for Suppressor Height Irons (fits Glock)

After printing out another sight pusher I decided I wanted to make a version that was smaller and quicker to print with a captured pusher. I also wanted to use more common hardware and I wanted it to accommodate supressor height sights up…

Downloads
343
Likes
75
Rating
3.5
P
PrintablesMachineboyzach

Skinny(er) Pusher for Brassless Smiley

While Silly's alternate pusher does clear nightingale magazines as advertised, its a little tight compared to the original. I spliced on the sealing version of Silly's pusher to the body of the original design to let magazines drop…

Downloads
339
Likes
42
Rating
5
P
Printablesknoopx

65mm Pusher Tiny Whoop Frame

Mobula6 / Meteor65 compatible frame. Print in PLA, PETG might work but found mine to flex too much. Print slow, will make it stronger. After printing break the supports under the ducts and FC mounts. You might need to re-drill holes on…

Downloads
317
Likes
26
Rating
0
P
PrintablesNixqy

Glock Sight Pusher - Suppressor Height Sights

I beefed up the frame by using 5 perimeter walls and adding a second spot to hold the slide on both sides. The pusher was redesigned to fit suppressor height sights. I added a hole in the wrench so it stays captured to the tool and a…

Downloads
309
Likes
58
Rating
4.5
P
PrintablesVoltaicJ

DI Resin Funnel and Packer/ Pusher

Funnel to fill your DI canisters with a packing/ pusher to help get the Resin packed tight

Downloads
305
Likes
23
Rating
3
P
Printables3DBob

Sewing Fabric Pusher

Easy print tool to add to your sewing toolbox. Print with 3 perimeters for strength. The point can have an issue with warpage, so best to add a brim. Thanks @Tiffi226! I hope you like ❤ my model and will post your makes! Happy printing!

Downloads
298
Likes
101
Rating
5
P
PrintablesAMSPawn06

Nerf Pinpoint Pusher kit

4 walls, 15% infill should work, the pusher does need supports, and you will need a small o-ring to go on the pusher head. the pusher goes in place of the standard breech, but the barrel assemblies have different assemblies as follows;…

Downloads
265
Likes
40
Rating
5
P
Printablesrocketboy

Tent Stake Pusher with Lanyard Hole

Tent stake pusher compatible with MSR Groundhogs and Easton stakes. MrCitizen did all the work on this, but I wanted a way to attach it to my tent stake bag, so I added a hole. Printed with a little support for the center hole. I used PLA…

Downloads
255
Likes
13
Rating
5
P
Printablesricewong

Adventure Force Spectrum Half-Dart Pusher

Half-Dart pusher for the AF Spectrum. Currently requires trimming of the area that holds the kill switch when the jam door is opened to operate. (See picture with red circle) This is compatible only with the Half-Dart adapter from the…

Downloads
247
Likes
19
Rating
0
P
PrintablesMeister Edel

Lanyator : Spyderco Paramilitary 2 & 3 Lanyard pusher

Hey there, i like to modify or clean my Spyderco knifes but it is always annoying to remove the scales from the lanyard plug. So I designed this Lanyator to solve that problem. It works like a simple chain tool and ensures an efficient…

Downloads
232
Likes
43
Rating
0
P
PrintablesRavenMac

One-handed DualSense Button Pushers with Icons

I wasn't happy that the icons had to be printed out separately and adjusted so that they don't interfere with each other. So I took the icons, scaled them down 75%, and embedded them 2mm deep into the button pushers. I had to make the…

Downloads
230
Likes
11
Rating
0
P

The PEX Pusher

Running PEX pipe in tight spaces and during remodeling jobs can be a challenge, especially when faced with obstacles, restricted spaces, and pesky insulation. Introducing The PEX Pusher , the tool you didn't know you needed that makes…

Downloads
210
Likes
99
Rating
0
P

Dart Zone Pro MK3 Anti-Jam Pusher

Replacement Dart Pusher for the Dart Zone MK3 flywheel blaster. Designed to correct problems with Jamming, and Double-Feeding. in stock form on release**, the MK3 has problems with jamming when using Talon magazines as well as problems…

Downloads
209
Likes
30
Rating
5
P
Printablesdagmandt

Drill Press Pixel Pusher

This is my solution for blistered fingers after pushing a thousand pixels by hand and with pliers. There are a few similar solutions on thingiverse and I took inspiration from all of them and set out to design my own to optimize it for my…

Downloads
208
Likes
15
Rating
5
P
Printablesmoranski

Sight Pusher for Glock Pistol

I tried to use other available tools but encountered some problems, especially during the installation of the new sights (the frame was too flimsy, and the pusher didn't allow the installation of new sights). The tool has strong walls,…

Downloads
202
Likes
33
Rating
0
P
PrintablesFrogProjects

Hybrid Pusher For Nerf Stryfe

A hybrid pusher to fire both half-length darts and full lengths from the same blaster! All other designs i found or bought either were too unreliable or weren't compatible with the OFP anti-jam lid. Credit to Jackskidding for the pusher…

Downloads
197
Likes
36
Rating
0
P
PrintablesBlueprint 3D

Arcade Coin Pusher game

The Table Top arcade style coin pusher, Perfect for fun at home for all members of the family! I made this as a gift for a family, All the major components are laser cut with only a few screws and a single switch and small DC motor…

Downloads
197
Likes
26
Rating
0
P
PrintablesAkardia

Pixel Pusher

Should be printed in default orientation. 4 perimeters, at least 5 top layers, 35% gyroid infill recommended as the pusher will see lots of force depending on the props clearance.

Downloads
197
Likes
12
Rating
0
P
PrintablesGemeneye

Nerf Pro Torrent Skinny Dart Pusher/Breech

Hello everyone! This is a 3D printed replacement dart pusher/breech for the Nerf Pro Torrent that allows for magazine swapping without needing to prime the blaster. While you can load and unload a magazine in a stock Torrent without…

Downloads
188
Likes
46
Rating
5
P
PrintablesCailess Arouræ

X-Shot Longshot Pusher

UPDATED FILES Did you let a coworker try out your Longshot, and did he subsequently break the pusher while somehow full sending a double feed so bad it required a full disassembly of your blaster? Cause I did, and thats why I designed…

Downloads
186
Likes
36
Rating
5
P
PrintablesCrazyCote

MOLLE, PLCE pusher tool

Molle/PLCE pusher tool for easy mount molle pouches/equipment on hard material like thick cordura etc. i like to print this model non planar ,but normal print works as well.

Downloads
184
Likes
40
Rating
5
P
PrintablesEccentriclulz

Stryfe Dart Guide Compatible Short Dart Pusher

Modified pusher to clear flywheel cages with dart guides. Used in conjunction with Talon compatible cages by ahalekelly ( https://www.thingiverse.com/thing:2843287 ) Feeds perfectly using Worker Talon Adapters designed for flywheel…

Downloads
182
Likes
34
Rating
0

Nerf Rival 130 to 260 Pusher Motor Housing

If you have a Nerf Rival belt pusher motor die, it is likely a 260 series motor with no readily available replacements. I designed a housing to use a 130 sized motor as a replacement. It has increased venting around the motor to allow…

Downloads
177
Likes
30
Rating
0
P
PrintablesTeeDeeBee

xTool D1 (Pro) Cable Pusher

Prevents the laser cable and optional Air Assist hose from rubbing against the top of your enclosure if you use the xTool risers (or my designed honeycomb centers & risers). Or just to keep them out of the way… Perfect and tested fit on…

Downloads
172
Likes
28
Rating
0
P
PrintablesLukas Wass

Tent Peg Pusher - Self Centering

You should avoid pushing tent pegs into the ground with your foot as you might bend or even break them. This tool is made to save your palm! The tool has an inner chamfer that makes it self-centering around the tent peg, independent of…

Downloads
170
Likes
26
Rating
5
P
Printableswoelpi

Lamello P-System dowel pusher

You'll need M3x10 screws or something similar. I used some screws for plastic that are 3.1x10. Both pieces are printed in PETG and glued together. I used a 0.6mm nozzle and around 5-6 perimeters with a 50% infill.

Downloads
166
Likes
27
Rating
5
P
PrintablesJambatic

X-Shot Longshot Pusher Reinforcement

Simple yet highly effective! This reinforcement prevents your X-Shot Longshot Pusher from breaking. Did your pusher already snap? Print, push, glue, and you're back in action. If it's still intact, print and install this reinforcement for…

Downloads
165
Likes
28
Rating
0
P
PrintablesHellBz3D

CFS Spool Spring Pusher - EasyPrint-Remix

This is a simple Remix of the Original-Parts, to not Print Parts in Mid-Air and even make the part with only 45Degree Edges All Other Parts can be used from the Original Part-List-Needed for 1 CFS: 32x 693ZZ Bearings ( 8 for each Pusher )…

Downloads
161
Likes
33
Rating
0
P
PrintablesChadwickTheCrab

Food Pusher for KitchenAid Grater

I dropped the food Pusher one time on a tile floor and it cracked. I couldn't find a design so I made this in Fusion 360. I printed mine with 5 walls with a 0.6mm nozzle which was almost 100% solid. Printed without supports.

Downloads
155
Likes
21
Rating
5
P
PrintablesaTm_wRECr

Honeycomb wall insert pusher/remover

I made a tool to aid in pushing out the inserts of a honeycomb wall system by RostaP . One end has a pilot for hollow inserts. The center is a ¼" hex for using a screwdriver bit handle with a long bit to add comfort to push. I didn't have…

Downloads
147
Likes
26
Rating
0
P
PrintablesB1g choppa

Xshot Fury X pusher fix

Had some problems with the pusher catching on the back of the darts in the mag and damaging them, so I did this. Works really well from what I see. The instalisation instructions are shown on the photos. be careful not to remove too much…

Downloads
146
Likes
31
Rating
5
P
PrintablesGajowy

Prusa MK4S pusher

This is 3-part model of pusher design for Prusa MK4S to clip on the bracket from Fan. With proper g-code you can eject your prints from front part of the bed after cooling down. This is the simplest solution for automatic printing with…

Downloads
145
Likes
88
Rating
4.5
P
PrintablesLauren Geist

6.5mm Needle Pushers

This is made with the Silver Reed LK150 in mind. The gauge is set to 6.5mm. Feel free to print them all or just the specific ones you need!

Downloads
140
Likes
16
Rating
0
P
Printablesdturak

Festool - Table saw pusher

Table Saw Pusher 🪚 A simple and practical 3D printable push stick for table saws , designed to help guide material through the saw while keeping your hands farther away from the cutting area. The wide handle provides a comfortable and…

Downloads
140
Likes
24
Rating
0
P
PrintablesBazing89

Stryfe auto pusher

3d printable stryfe full auto kit just need a cheap geared motor enjoy. Category: Hobby

Downloads
140
Likes
27
Rating
5
P
PrintablesNotGabe

Half dart stryfe pusher that actually looks nice

I wanted to convert my stryfe to half darts, but couldn't find a pusher that I liked, so I made my own! Some notes: Not compatible with unmodified daybreak cages, since their dart guide interferes with extended pushers. You can fix that…

Downloads
132
Likes
12
Rating
0
P
PrintablesRotaryFever

Tall sight pusher for Glocks

Modification to spiggytech's pusher tool to install taller sights.

Downloads
132
Likes
14
Rating
5
P
Printablesdr.dentz

Door handle and button pusher with housing

During the current Corona epidemy I wanted to share my model that I have been creating to minimize contact to surfaces that are touched by many people. The design is inspired by a lot of other models I saw online. However not many had a…

Downloads
131
Likes
2
Rating
0
P
PrintablesSalut

Triggerpunkte Drücker Triggerpoint Pusher

Dies ist ein Modell für einen sogenannten Triggerpunkte Drücker. Es dient dazu gezielt Triggerpunkte, Muskeln und Faszien zu massieren. Der Drücker kann aus nahezu jedem Material gedruckt werden, es ist lediglich ein Infill >20% zu…

Downloads
131
Likes
18
Rating
5
P
PrintablesTilan2000

Bambu Lab Clog Pusher for Hotend - Brass inserts M3x4

This is a remix of the Bambu Lab X1C Clog Pusher Remix with PTFE tube. I reduzed the holes for the brass inserts to 4 mm to make them fit for the Ruthex M3x4 brass inserts I have laying around. I enlarged also the length of the hole to 5…

Downloads
130
Likes
37
Rating
5
P
Printablesjoepublic

DAC Tent Stake Pusher

If you like this model, and you're feeling generous, please check out my Ko-Fi page here ! Here's a handy way to push in your DAC tent stakes without digging a hole in your palm (or soles). Features a wider section to allow for cordage on…

Downloads
129
Likes
9
Rating
0
P
PrintablesBearic

Pickle Pusher

When making pickles or sauerkraut, you need to keep the vegetables below the water level to prevent mold from growing on them. This simple print lets the liquid through and pushes the vegetables below the liquid level! Keep in mind that…

Downloads
126
Likes
18
Rating
5
P
Printablesbenry

hc diana pusher extender (diana misfeeding issue)

may have to scale it to get it to fit right, should not need glue but you can use some. press into the hole in the front of the pusher and your misfeeding problems should go away.

Downloads
124
Likes
14
Rating
0
P
PrintablesBlueforcer

SmartPusher

Bored with smartphones and voice control? Go back to the roots with real buttons to control your smarthome! SmartPusher is a wifi enabled button array wich lets you control your smarthome in different ways. Button funtions: Click,…

Downloads
123
Likes
17
Rating
5
P
Printablestedcook94

Nexus Pro Short Dart Only Skinny Pusher

Remix of the Nexus Pro skinny pusher that adds extra length to remove a lot of the slack during priming. As a result, this pusher can no longer feed full length darts. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…

Downloads
122
Likes
12
Rating
0

Protean Flycore-Style Pusher

Update 06/03/2025: Turns out that i have uploaded the wrong Pusher STL, this could have caused feeding issues, the new one fixes them. Introduction This is a full-auto Pusher Group for the Protean Foam Blaster. Instead of the solenoid…

Downloads
117
Likes
26
Rating
4.67
P
PrintablesJimbob

Better Insert Remover for Honeycomb Storage Wall - Extra pusher leverage

I made a big mistake and put my boards up, with half of them not being aligned with the other half… so had to push out a dozen or so inserts out. My thumb complained… so here's one with a little longer lever to go easier on the thumb :).…

Downloads
117
Likes
16
Rating
5
P
PrintablesWCTT

MicroSD Card Pusher (For Ender 2 Pro)

The Ender 2 Pro's microsd slot is ridiculously difficult to use, so this is a thing I created. :)

Downloads
116
Likes
20
Rating
4
P
PrintablesSimb

Dart Zone Adventure Force Nexus Pro Skinny Pusher

Allows unprimed reloading on your Nexus Pro!

Downloads
115
Likes
16
Rating
0
P
PrintablesPolygonPusher

PolygonPusher - Laser cutter levelling clamp

Anyone who has operated a laser cutter knows that the surface to be cut needs to be as flat as possible. This simple clamp helps you to level the sheets of wood, acrylic, etc when laser cutting. The shaft is 5 mm in diameter. Instructions…

Downloads
110
Likes
18
Rating
5
P
PrintablesHeimwerkerdad

Pusher Replacment for KitchenAid food processor

This is a replacement for the Pusher for a 5KSM2FPA Food processor which broke. It's not a copy but an in my view improved design. => it's much more robust than the original which just broke as accidentally was dropped => it's closed on…

Downloads
110
Likes
7
Rating
5
P
PrintablesLookahead

Super Duper Paste Pusher

A simpler version. Print Settings Printer: ZAV H-Bot Rafts: No Supports: No Resolution: 0.2 Infill: 20 Category: Bathroom

Downloads
109
Likes
10
Rating
5
P
Printablesjjeeffff

Protean Select-fire Pusher

Select Fire Pusher! This in essence a “merging forward” of Skwiggums' Shirdal Gryphon into the newer protean. This builds a fully modular pusher unit for a Protean blaster that should be compatible with any other stocks and receivers. It…

Downloads
108
Likes
38
Rating
5
P
PrintablesAnastasia

Simple 9 mm Bulky Knitting Machine Needle Selectors or Pushers

If you have a 9 mm bulky knitting machine and lack needle pushers, then you need these. I designed these to be simple and quick to print. So far I have the following combinations: 1 x 1 2 x 2 and 3 x 3 2 x 1 and 1 x 2 3 x 1 and 3 x 1 4 x…

Downloads
105
Likes
16
Rating
0
P
PrintablesPajaa

Big Agnes stakes pusher

The Big Agnes stakes have a unique shape, so I made this pusher to make it much easier to push them into the ground. The pusher weighs 7g-10g, depending on how you slice the model. Added loop version too. My printing setup: Material:…

Downloads
104
Likes
5
Rating
4

Tandem Magazine for Nerf Blaster (Require a modified pusher)

Tandem Magazine. A double stack-ish short dart magazine for full-length magwell. This Magazine REQUIRES a Modified Pusher to Function Properly! Currently Available: Magnet Embedded Pusher Demo: Features Tandem Magazine is basically…

Downloads
103
Likes
49
Rating
5
P
PrintablesButcher

Gravel 2.5" pusher drone

I design this frame/drone to do hard flies in busy places like thick forests. I used 3mm thick plates for the main plate, so it can survive hard crashes. Pusher configuration with bottom mounted battery, which I prefer especially on…

Downloads
103
Likes
14
Rating
0
P
PrintablesGeorge-Corrigan

Coin Pusher Towers

These are helpers for making coin structures in a coin pusher. 1, 6, and 8 coin versions. All should work with quarters and most tokens. * Included a regular and twisted version for 6 and 8 coin towers. * Included several wall versions…

Downloads
102
Likes
10
Rating
0
P
PrintablesVictronix

Car windscreen wiper pusher

Problem Have you been driving on the highway and you windscreen wipers are bouncing on the windows. Or you want to use the wipes in rain, but then don't have good contact with the glass? Solution This jig pushes the car's windscreen wiper…

Downloads
99
Likes
20
Rating
5
P
PrintablesSimb

Dart Zone Nexus Pro Skinny Pusher - Short Darts

EXPERIMENTAL / WIP Remix of the skinny pusher. Eliminates slop, and the telescoping piece, to decrease areas of air leaks. ONLY WORKS WITH A MODIFIED BREECH

Downloads
99
Likes
12
Rating
0
P
PrintablesJoshua Friesema

MSR MiniGroundhog Pusher & Cleaner

Use this device to push in MSR mini groundhog stakes without hurting your hand. Then after removing the stakes from the ground unscrew the insert and use it to scrape the mud/dirt off of the stakes.

Downloads
99
Likes
12
Rating
5
P
PrintablesGeorge-Corrigan

Arcado Coin Pusher 365 - Side Coin Guard

This is a guard to snap on and block the amount of coins that fall though side slots. I have three versions, fully closed, 50%, 40%. This prints with the back down. -- This should have supports enabled. This only supports the tiny ends.…

Downloads
99
Likes
6
Rating
0
P
PrintablesDancer

Tent stake pusher

Help you push down your tent stake

Downloads
97
Likes
14
Rating
5
P
PrintablesMark4

modified catch pusher for SLAB v4

I found that rod activating the trigger was bending out instead of moving forward with the original pusher. Added ~4mm of width to the pusher ad sliced off a bit at the top. With this I get a smooth and reliable trigger operation.

Downloads
96
Likes
11
Rating
5
P
PrintablesXVF333

Seiko monopusher bezel 45899

This is a replacement plastic bezel for the seiko monopusher 45899. Since the original is almost impossible to find. Print in black resin (or paint black), nummerals should be white. The bezel can be pushed onto the watch and stay there.…

Downloads
94
Likes
5
Rating
0
P
PrintablesJoss27

Curved Arm extension and bigger roller for CFS Spool Pusher

ENGLISH remix from https://www.crealitycloud.com/model-detail/cfs-spool-pusher-upgrade-no-bearing-no-spring : I modified the arm by lengthening it and applying an inclination thus allowing a better pressure on the spool. I also created…

Downloads
93
Likes
16
Rating
0
P
PrintablesTalinseven

Electrical Cable Bundle Pusher-Puller Cap

A cap I printer to make it easier to push a 3/0-1/0 wire bundle through a 2" conduit.

Downloads
93
Likes
29
Rating
0
P
PrintablesAndrew B

Universal tent peg pusher

Little hand saver tent peg pusher doodad with hole for paracord loop for attaching to something. I have shown a screenshot of my slicer settings, but they are not set in stone, I tried an “ultralight” version that was 1.7g lighter, but it…

Downloads
92
Likes
10
Rating
0
P
PrintablesRho

Guide Pusher for Ulmia Mitre Saw

A replacement blade guide pusher (german Führungsschieber) for an Ulmia Ott Mitre Saw, Type 352.

Downloads
92
Likes
2
Rating
0
P
Printablesfoam.blasted

Dart Zone / Adventure Force Spectrum Front with rail and hybrid pusher

Finally got my hands on a Spectrum and remixed the front from OPCOLU. You will need 4x M3 heat inserts and M3x10mm screws for assembly. Additionaly i made a hybrid pusher that works with full-length mags and also with half-dart mags in…

Downloads
92
Likes
19
Rating
5
P
PrintablesMrCitizen

Tent stake pusher

Props to Lukasz for an MSR Groundhog compatible design. I have lots of those but I also started using these based on a carbon arrow shaft and wanted something that works for both. I added curvature to the top that fits great in your hand…

Downloads
90
Likes
8
Rating
0
P
PrintablesFly N Hy

Paste Pusher

This is my personal challenge to earn Prusa in Earn Prusameters! The goal is 25000 Points, which is 70 models downloaded 400 times and liked 20 times. I wonder if it is possible to achieve this. I also printed every model that I add.…

Downloads
88
Likes
8
Rating
0
P
Printablesnieckel

Air Hockey pusher

Simple pusher for air hockey. I printed it in PETG, but it can be done in PLA/ABS. It doesn't need to be printed solid, but I recommend that the base has solid padding to give it weight, as the pusher is very light.

Downloads
87
Likes
5
Rating
0
P
PrintablesLopatka

Virus Door Assistant and Button Pusher

This is a fast and easy print that can be used to help open doors and push buttons. It should be printed in PETG. My daughter saw a picture of something similar and asked if I could design and print one for her. It wasn't hard, and the…

Downloads
84
Likes
4
Rating
0