Search results: q2

Sort order

532 models

P
PrintablesMene

1Zpresso Q2 coffee grinder bean hopper lid

This is a replacement for the semi-clear plastic lid that is attached to the q2 handle. I measured the old part, created the model in OpenSCAD and printed it. It fits perfectly. While this is a very easy design, I am it sharing in case…

Downloads
36
Likes
1
Rating
0
P
PrintablesArtificalSUN

QIDI Q2 minimalistic purge/waste bin (poop box)

Simple and easy to print filament waste bin for QIDI Q2. Unlike most other models does not require any additional hardware (magnets, screws, adapters, etc.) to mount. The hook/latch design relibly holds the bin in place while still being…

Downloads
4,390
Likes
274
Rating
5
P
PrintablesSlaw

Purge / Poop / Waste Bin / Box for Qidi Q2

This waste box brings rolls the purge material to the front (as original model) but also added a drawer to make simple the emptying of the box without moving the whole box. It can be important, if you do not have much space and you want…

Downloads
3,331
Likes
228
Rating
4.93
P
PrintablesLouis Hitch

QIDI Q2 Poop Chute/Bucket

This is a clip-on poop chute/bucket for the QIDI Q2 , designed to collect purge material neatly without any screws or permanent modifications. UPDATED Small Version (RECOMMENDED PRINT) : Added Chamfers to improve Printability Added Holes…

Downloads
2,806
Likes
117
Rating
4.57
P
PrintablesStudio 507

QiDi Q2 Riser

Riser with vent for the QiDi Q2, this is found on the QiDi Wiki page, but I am uploading it here so it is easier to find. Prints easy, I used .2 LH and the “.2 strong” setting. I use automatic, normal supports with the stock settings set…

Downloads
2,660
Likes
230
Rating
5
P
PrintablesDeltaDesignRus

QiDi Q2 TPU fixer

Spacer for stable TPU printing for the QiDi Q2. In the stock setup, there is a 2.6–2.7 mm gap between the front wall of the feeder housing and the drive gears, where soft TPU filament can sometimes slip out. With this spacer installed,…

Downloads
2,366
Likes
356
Rating
5
P

Qidi Q2 — Cooling Duct (v5.1 & v6.0 Dual-Flow)

Qidi Q2 — Performance Cooling Duct (v5.1 & v6.0 Dual-Flow) Summary A high-efficiency part cooling shroud for the Qidi Q2 . This duct was precision-engineered using CFD (Computational Fluid Dynamics) to reduce turbulence and provide a…

Downloads
2,199
Likes
462
Rating
4.77
P
PrintablesStur0067

Qidi Q2 Q2C spool holder and box hub bracket

Print with 3-4 perimeters for strength and use the orientation it imports in as no supports are needed. I’d recommend PETG, PCTG, or ABS since they are more flexible than PLA or ASA and more forgiving of tight tolerances. You may need to…

Downloads
2,053
Likes
204
Rating
4.95
P
PrintablesLittle Apollo

Qidi Q2/Qidi Plus 4 PTFE Guide Clip

This is a simple but functional dual purpose clip designed for the PTFE tube/push fitting on the Qidi Q2 toolhead. The clip acts both as a locking clip to prevent the PTFE tube from being removed and it also straightens the PTFE tube to…

Downloads
1,842
Likes
216
Rating
4.9
P
Printablesricrom

Qidi Q2 Toolhead Cover - Full body sets

UPDATE 11/09/2026 Someone had issues with the front cover while using the polar cooler so you should be aware that these covers were made before the polar cooler and from what I can see they won't fit without some hacking. I Will consider…

Downloads
1,566
Likes
290
Rating
5
P
Printablesmrsheikh

Qidi Q2 Custom Fan Duct

Stock cooling duct on the Q2 is very imbalanced and the left side suffers from poor cooling as a result. I designed this duct and fan mount to correct that and simultaneously improve the cooling performance. It is drastically better. It…

Downloads
1,561
Likes
294
Rating
5
P
Printableswanderyr

Improved Q2 Poop Bin - stable with no tools or screws (purge/waste)

A purge waste bin. It doesn't vibrate loose, it doesn't require tools or printer mods, and it doesn't block vent slots. It's wider than it looks in the pictures, and, like a certain police box, it's bigger on the inside! What makes this…

Downloads
1,449
Likes
46
Rating
4.75
P
Printableswanderyr

Slightly Taller Qidi Q2 Riser

An issue with the Qidi Q2 is that the internal PTFE filament tube rubs against the underside of the glass lid. Even worse, it scrapes across the screw heads which hold the lid's handle in place. A common solution is to print a riser for…

Downloads
1,385
Likes
133
Rating
5
P
Printablesdta.teks

QIDI Q2 & Plus 4 – Perfect Fit Platform Leveling Blocks

The underside of the platform feet isn’t perfectly flat, so the bed never references a true plane and dual-Z drift makes it worse. These blocks give a flat, rigid reference, so the platform squares quickly and stays consistent. They can…

Downloads
1,277
Likes
186
Rating
5
P
PrintablesSteven Barker

QIDI Q2 Foot support with extra clearance

Modified version of Allan's QIDI Plus4 foot to fit the Q2. This raises the Q2 1cm off your desk, and provides a wider base for stability. For my printer this increased stability and reduced vibrations. These may require more work, your…

Downloads
1,197
Likes
133
Rating
5
P
PrintablesDmitry

Toolbox for Qidi Q2 tools

I've got my Qidi Q2 and tools were just in a plastic bag, I've decided to store it in a box.

Downloads
1,156
Likes
138
Rating
4.89
P
Printablestatsumi uehara

Enclosure Dust Cover for QIDI Q2

This is a dust cover for the enclosure. It prevents dust and important bolts from getting in. I made this because I lost a bolt for my M3. It works better if you use double sided tape.

Downloads
1,136
Likes
182
Rating
4.86
P
PrintablesSunny Barlow

QIDI Q2 LID RISER

This riser is designed to accommodate the QIDI Q2 glass lid. I’ve included the STEP file via Onshape to allow for easy customization, particularly if your foam tape dimensions differ from mine. Materials Used: ½" × ½" foam tape M2 heated…

Downloads
1,062
Likes
110
Rating
4.88
P
PrintablesLami

Qidi Q2 Riser

QIDI Q2 Riser I redesigned the original H3D-Himon riser because the top glass wasn’t lifted high enough — the PTFE tube was still scraping against the glass. This version increases the height by about 45 mm , giving the tube enough…

Downloads
1,028
Likes
125
Rating
4.75
P
PrintablesStur0067

Qidi Q2 Q2C handle screw ramp

My first attempt, which was oval race-track shaped with a very shallow 20 degree leading edge still managed to catch the PTFE tube. So, I modified the design to be more inspired by cow-catchers on the front of trains. I printed it in PETG…

Downloads
1,014
Likes
109
Rating
4.83
P
Printablesblackmav

Qidi Studio compatible Qidi Q2 Temperature Tower PLA 190-230C

Open the corresponding 3mf file with "Open project...", select your filament and nozzle, use 0.2mm layer height, slice it and switch to the temperature tab. Check that there are multiple temperatures. --> Print and have a look at the…

Downloads
982
Likes
47
Rating
5
P
PrintablesAleMaker 3D

Filament Purge Bin for QIDI Q2

Filament Purge Bin for QIDI Q2 . Keep purges under control—whether you print multicolor or single-color with frequent filament changes. Designed exclusively for the QIDI Q2, it mounts cleanly and keeps the chamber tidy without permanent…

Downloads
915
Likes
83
Rating
4.67

Pfte tube guider for Qidi Q2

Are two pieces not enough? Print as many as you need. To insert the clip, you need to disassemble the desired segment of

Downloads
896
Likes
138
Rating
5
P
PrintablesTytonic7

Qidi Q2 Door Handle

This is a replacement glass door handle for the Qidi Q2. It is much larger (while still looking nice), making it significantly easier to open/close the door comfortable. Uses the screws & bushings from the original handle.

Downloads
805
Likes
68
Rating
5

Qidi Box Desiccant Vessel - Qidi Q2, Qidi Plus 4, Qidi Max 4 compatible

This model is a large capacity desiccant vessel for the Qidi Box. It's best filled with a funnel or chute with one of the side plugs installed and before installing it in the printer. It keeps the box much dryer than the original packets.…

Downloads
794
Likes
132
Rating
4.78
P
PrintablesLittle Apollo

Qidi Q2 Improved Cooling Duct & Toolhead Cover Set

UPDATES 11/14/2025 Version 1.11 Made a version of the cooling duct for the more common small mouth 5015 fan. Added a honeycomb version of the cooling duct bottom panel. Also removed the curved wall on the inside of the fan area for the…

Downloads
768
Likes
149
Rating
4.5
P
PrintablesUser27

QIDI Printers (Q1 Pro, Plus4, X-Max3, X-Plus3, Q2, Max4) Spool Holder with Bearings

I designed this spool holder for QIDI printers because the original one, when used with cardboard spools, often created too much friction. This could lead to false filament tangle detections and also generate annoying noise. After…

Downloads
728
Likes
99
Rating
5
P
PrintablesRoss3D

280mm Build Plate Holder for QiDi Q2

Build plate holders for 280mm x 280mm build plates. Primarily made for the QiDi Q2 but can fit any other build plates of similar size. Recommended print settings: PETG 3 walls 10-15% infill 5 bottom, 5 top layers You can print this on the…

Downloads
721
Likes
79
Rating
5
P
Printablesgasdocscott

Qidi Q2 Hot Bed Nut Wrench

The printable wrench for the bed leveling nuts is quite loose, and the nuts themselves are pretty tight. I made a newer version that tapers slightly, gripping the nuts much better. I printed this in PLA and it holds up well, unlike the…

Downloads
681
Likes
54
Rating
5
P
Printablesccd

Qidi Q2 Box Riser/Shelf

NOTE. YOU WILL NEED TO ROUTE THE PROVIDED QIDI BOX PTFE TUBING THROUGH THE HOLE NEXT TO THE RUBBER WHERE IT WAS PREVIOUSLY ROUTED PRIOR TO INSTALLATION, I HAVE BEEN USING IT THIS WAY FOR A MONTH OR SO NOW WITH NO ISSUES. A simple…

Downloads
669
Likes
96
Rating
4
P
PrintablesJack@KunWork

Qidi Q2 Platform leveling blocks_Remixed

I chose this model was because of the “Height”. I have noticed the power wires at the right-back corner, which means we would need more space to make sure the wires won't interfere with the platform leveling process. And the stage I have…

Downloads
667
Likes
65
Rating
5
P
Printablesweav

Qidi Q2 Camera Hood (eliminate LED light bloom/flare)

Clip on Camera Hood for the Q2 to reduce flare and blooming from LED lights. One is for front (stock) and 200mm LED light bar (see my other models) and another that blocks entire top (for people with risers with light strips). Suggest…

Downloads
635
Likes
90
Rating
5
P
Printablesjbot

QIDI Q2 Top Spool Holder

Top mounted filament spool holder for printing soft TPU on QIDI Q2. Can be used without removing QIDI Box. Uses spool axle design from Cell Spool Winder . Parts needed: 1x Axle.stl 2x Side.stl (Optional) Axis drive 01.stl and Axis drive…

Downloads
620
Likes
109
Rating
4.83
P
Printables_Storch_

Qidi Q2 - PTFE-Stütze am Hotend

er PTFE am Hotend neigt sehr zum Abknicken. Dadurch gibt es Probleme beim Wechsel des Filaments bzw manuellem Nachladen des Filaments.. Das verwendete Filament zum Drucken muss zum im Drucker verwendeten Filament passen.. Wenn die…

Downloads
612
Likes
75
Rating
5
P
Printablesricrom

QIDI Q2 Improved cooling fan - new housing / duct for 5015 fan (regular and wide mouth)

UPDATE 29/01/2026 Added STEP files and updated the "Wide mouth with fin" model with 2 fillets. UPDATE 06/11/2025 Added models to fit 5015 fans with wide mouth, like the stock one. One model is basically as the stock housing but with…

Downloads
569
Likes
117
Rating
0
P
Printables3DGearSupply

Qidi Q2 Purge Bin

I like this model more than all the others I found because it rolls the purge material to the front and doesn’t require you to move the bin to clear it out

Downloads
565
Likes
46
Rating
5

Qidi Q2 Z-holecover (Tpu)

For tpu print. defend z holes from trash. carefure with termochamber. Model : Volvik88 @choolkov

Downloads
535
Likes
112
Rating
4.82
P
Printablestatsumi uehara

QIDI Q2 Top Glass Handle & Screw cover

The Handle provides a firm grip and the Screw cover allows for easy movement of the PTFE tubing. Bolts M3x10mm 2pcs Nuts M3 2pcs Use a creep resistant material such as PETG. The layer pitch must be 0.2 mm and the total number of walls…

Downloads
529
Likes
75
Rating
4.8
P
PrintablesKOMMIRA

QiDi Q2 - 4 Inch Exhaust Duct

4-Inch Exhaust Duct for Qidi Q2 – Improved, Optimized, and Easy to Install Upgrade your Qidi Q2 airflow setup with this redesigned 4-inch exhaust duct , engineered to offer smoother airflow and easier hose connections compared to the…

Downloads
516
Likes
65
Rating
5
P
Printablesおっちゃん

QIDI Q2 FAN Duct

I recently bought a QIDI Q2 . Initially, I was considering the Bambu P2S , but the Bambu was simply too expensive for my allowance. When it arrived, I was surprised to find that the airflow from the model fan was weak . At first, I…

Downloads
505
Likes
100
Rating
4.67
P
PrintablesHaroldhihat

[MORE EMBLEMS!!!] 1/4 Scale Federal Q2B Siren [BIKE BATTERY PACK!!!]

⚠(DISCLAIMER)⚠ MY MODELS ARE PUBLISHED UNDER THE CC BY-NC-SA 4.0 LICENSE: https://creativecommons.org/licenses/by-nc-sa/4.0/ You are welcome to download, print, share, and remix all my designs with credit, but you may not sell any of my…

Downloads
489
Likes
46
Rating
5
P
Printablesccd

Qidi Q2 Extra Large Door Handle replacement/upgrade

A large pull handle to replace the factory one (or another printed one). Uses the factory screws to attach the stock handle. Printed in PETG since its all I had in silver but i'm sure most filaments outside of PLA will be fine (and even…

Downloads
471
Likes
56
Rating
0
P
PrintablesManny

Qidi Q2 TPU feet

Q2 2 is quite low on the table. Also has the PSU on the bottom sucking all the dust and particles there. I looked and it was quite warm underneath due to PSU and Z stepper motors working in a very narrow space. I raised it by about 1 cm.…

Downloads
469
Likes
70
Rating
5
P
PrintablesBlueTip

Qidi Q2 60mm Riser Top-Hat

Qidi Q2 60mm tall riser with vent sliders and internal/external accessory mount points. None of the existing published designs had all the characteristics I wanted, so I created my own. I modeled this in TinkerCAD, and the STEP files were…

Downloads
458
Likes
71
Rating
5
P
Printablesbrip3D

Qidi Q2 Z-Rod Base Cover

Simple cover to prevent debris from falling into the holes around the Z-rods. It should be printed in a heat resistant material. I printed them in ASA. 2025-12-27 v1.5 Thanks to Gleb Grigorian for making me aware of the forgotten screws…

Downloads
437
Likes
56
Rating
4.33
P
PrintablesAlex Johnson

Qidi Q2 Filament Waste Bin

Qidi Q2 Waste bin, can be clipped on. Poop Bin

Downloads
424
Likes
38
Rating
5
P
PrintablesLittle Apollo

Qidi Q2 120mm Exhaust Fan Upgrade and Custom Back Panel

UPDATES 12/26/25 Added a version of the back panel that doesn't have the PTFE tube cutout in the top right corner. Added a printable TPU plug for the top right corner TPFE guide cutout. Removed the unused holes to mount the Qidi box hub…

Downloads
422
Likes
111
Rating
3.63
P
PrintablesMiseryEngine

QIDI Q2 Waste Bin

This is a simple poop box I created in Fusion emulating the body style of the Printer with an embossed QIDI logo. Print it in black or silver for matching body color palette. I did not want anything wrapping around the unit so this is…

Downloads
408
Likes
13
Rating
5
P
PrintablesKramer

Qidi Q2 Chamber Exhaust Fan Duct Coupler With Lip

This allows you to fasten a 3" flexible duct to the QiDi Q2 exhaust port. The original model that I remixed this from (thanks Weav ) was very good but I had already designed other duct work that had a lip at the end of the tube to “catch”…

Downloads
407
Likes
59
Rating
5
P
Printableswanderyr

Qidi Q2 Nozzle Box Insert: 9-Nozzle Storage Case. No supports!

If you've ordered new nozzles, you've been impressed with the boxes that Qidi ships them in :) This insert sits in these boxes and gives room for nine nozzles. Why print a whole box when theirs is so good?! The insert has been designed to…

Downloads
403
Likes
73
Rating
5
P
PrintablesMadnamie

Qidi Q2 Door and Lid Handle

New Handle for multi colour 20 Feb 2026 Added another Handle ( Fits Both Door and Lid) using original screws. 13 Jan 2026 Printed in Qidi ABS Rapido Silver, using Qidi Studio with Qidi ABS Rapido Metal filament profile. Printed in upright…

Downloads
398
Likes
42
Rating
5
P
Printablesweav

Qidi Q2 Chamber Exhaust Fan Duct Coupler

Use to attach a 3 inch vent hose to the exhaust port on the Qidi Q2. You will need to stretch over the coupler as this is a bit larger than 3 inches but provides a snug fit to the hose. Printed in PETG. I used m3x8 self-tapping screws.

Downloads
376
Likes
51
Rating
0
P
Printablesweav

Q2 QidiBox Buffer PTFE Tool

A tool to easily disconnect the PTFE tube from the qidibox buffer. You no longer need to lift the buffer to expose the coupler. Just insert this into the hole where the tube is and push down to release the coupler and then pull the tube…

Downloads
367
Likes
37
Rating
5
P
Printablesdenix

Qidi Q2 Simple waste basket

An attempt to make a simple to print and easy to use filament waste bin. There are two versions of hangers: V1 - Mounting in standard sockets using extended screws (requires 2.9 x 16 mm with countersunk head). V2 - Since I didn't have the…

Downloads
366
Likes
30
Rating
5

QIDI Q2 TPFE Tube Guide

This part prevents the TPFE tube from touching the lid.

Downloads
362
Likes
42
Rating
0
P
PrintablesPaul Johnson

Low Profile Qidi Q2 Z Axis Cover

This is a low tolerance, tight fitting model. It is low profile (only 1mm proud), and interlocking. The shoulder/lip is minimally wide, and has a spot to catch an edge if for some reason you ever need to remove them. I printed in PETG. Be…

Downloads
362
Likes
41
Rating
4.33
P
PrintablesOllSEESllO

QIDI Q2 Poop Chute 52g

Function :Guide waste material to slide down from the left side of the printer via the chute. Key Features 1. No original part replacement, easy installation 2. Metal-free, fully 3D-printed 3. Printable with any material 4. Only 51g, easy…

Downloads
359
Likes
37
Rating
5
P
PrintablesTranbert

Qidi Q2 Qidibox Stock Riser Cap

A very simple cap for Qidi q2 riser sent with Qidibox: Prints ok with PLA, maybe best with PETG ...

Downloads
340
Likes
54
Rating
5
P
PrintablesFiores

Qidi Q2 screen cover

Simple cover for Qidi Q2 screen

Downloads
339
Likes
41
Rating
5
P
Printablesdta.teks

HULA QIDI Q2 & Q1 - Perfect Fit Center Core

HULA Center Core - Modern and Perfect fit for QIDI Q2 & Q1, no need remove original feet!

Downloads
329
Likes
54
Rating
5
P
PrintablesHewll

TPU feet for QIDI Q2 Foot support

TPU feet for: https://www.printables.com/model/1411842-qidi-q2-foot-support-with-extra-clearance Didn't feel like printing the whole thing from TPU, so I made these. The bottom is 2mm thick. 3 walls, 3 top/bottom layers, 20% gyroid in TPU…

Downloads
321
Likes
53
Rating
5
P
PrintablesTeamD3dp

Qidi Q2 exhaust to 120mm PC fan and 4 inch hose

After creating a similar exhaust adapter for my Core One, I decided to design one for our office's Qidi Q2. This adapter takes the Qidi Q2 exhaust to a 120mm PC case fan, with another adapter to 4" exhaust hose that will be run to a roof…

Downloads
319
Likes
59
Rating
5
P
Printables3DGearSupply

Qidi Q2 Top Slider Nob Upgrade

Prevents PTFE tube from snagging. Snaps right into place

Downloads
313
Likes
61
Rating
5
P
PrintablesManny

Qidi Q2 poop/waste bin

The bin is kept in place with 3 hooks which enter some ventilation holes. In that area is the ventilation for the SSR unit responsible for heating the chamber. I felt like to block 3 out of 5 vents slots was not ok. I made some holes to…

Downloads
302
Likes
21
Rating
5

QIDI Q2. PTFE Tube Holder

An alternative version of the PTFE tube holder for the QIDI Q2 3D printer. The holder is slightly smaller in size and has a slightly larger tube opening. Three options are available: a straight one and two with a slight upward lift above…

Downloads
294
Likes
32
Rating
4
P
Printablestatsumi uehara

QIDI Q2 Part Cooling Fan Upgrade to BambuFan

This modification is at your own risk. Upgrade the Q2's part cooling fan to a Bambu X1 or P1 fan. Transplant the Q2 cable to the bambu fan. At this time, cross the two cables on the left. The fan power will be overwhelmingly strong, so…

Downloads
286
Likes
124
Rating
5
P
PrintablesJose

Temp Tower ABS Qidi Q2

Changes made for G-code to work on Qidi Studio. although temperature changes between layers is not perfect it'll get the job done for testing new filaments.

Downloads
285
Likes
17
Rating
5
P
PrintablesJJwdp

X-axis rail cleaner for Qidi Q2

A simple rail cleaner for the x-axis of the Qidi Q2 (should also work with Q2C, let me know), dimensions are sightly tuned to allow to put some microfiber cloth or whatever you use between the tool and the rail. Can be used both on top of…

Downloads
282
Likes
49
Rating
5
P
PrintablesTenthrow

KeyChron Q1 Q2 Q3 Knob Q series

This KeyChron replacement Knob is a perfect fit if printed on a well tuned machine. If your printer is a little sloppy you might need to scale it up slightly. I print these top down but you can certainly flip it and print with supports if…

Downloads
280
Likes
25
Rating
5
P
Printableszxmuffin

QIDI Q2 Simple Handle

UPDATED 20/01/2026 Screw holes adjusted according to user feedback. Fits both front and top glass panels. SLICING: For the cleanest look use scarf seam painted over the surface where the screws go. .12 layer height, 3+ walls, infill at…

Downloads
277
Likes
41
Rating
5
P
PrintablesTP98

Qidi Box riser for Q2

First off, I wanted to upload this as a paid print, only because it took me a lot of time and filament in prototyping, but minimum price was 5$, so here we are - it's free. This riser is meant for Qidi Q2 with the original riser. The…

Downloads
275
Likes
44
Rating
5
P
Printablesjbot

QIDI Q2 Box Hub Adapter

Designed for using M3x12mm socket head cap screws, but this requires enlarging mounting holes on the back panel.

Downloads
274
Likes
51
Rating
0
P
Printablesyuyudo

Plug for Unused Filament Inlet When Adding QIDI BOX to QIDI Q2

When using the QIDI BOX with the QIDI Q2, a riser is included and the filament inlet on the riser is used instead. The original filament inlet on the Q2 becomes unused. This plug is designed to cover that opening to reduce heat loss from…

Downloads
273
Likes
35
Rating
5
P
PrintablesLemonidas

Qidi Box Filament Retraction Fix (Gear Pressure Spacer) Q2 Q2C Plus 4 Max 4

If your filament is not retracting properly (the spool doesn’t rotate) and instead unwinds inside the Qidi Box instead of going back onto the spool — this model fixes that problem. This spacer reduces excessive pressure between the…

Downloads
272
Likes
71
Rating
5
P
PrintablesB1END

QIDI Q2 Poop Chute / Purge Chute

A purge chute I made for the QIDI Q2 and the QIDI Box to collect waste filament, because I needed something that is slim and easy to remove. The attachment is very simple, you just need to unscrew the two existing M3 bolts and screw in…

Downloads
269
Likes
6
Rating
5
P
PrintablesExtrud3D

Alternative bin for Purge / Poop / Waste Bin / Box for Qidi Q2

Remix Bin with no supports required for the handle, thinner walls and optional lid for this model

Downloads
268
Likes
14
Rating
5
P
PrintablesViktor Koncsek

VR optician Q2->Quest 3 adapter

Works best with inserting the lens itself into the model. Also you can attach the original VR Optician thing to it from the outside, however even on max distance I felt it touching my forehead. NOTE: The lenses had to be rotated a bit… so…

Downloads
267
Likes
17
Rating
0
P
PrintablesSPUNGUH

QIDI Q2 Manual Belt Tensioner

1-11-26 : Updated note about adding dab of superglue to tensioner ends. This ideally prevents the adjustment screw from puncturing when doing a lot of tensioning. Needs a re-design, but this works for the time being foe extra security.…

Downloads
262
Likes
85
Rating
5
P
PrintablesBronzeBack3D

Qidi Q2 poop chute

Poop chute for the q2 you will need supports for the nipples that go into the screw recess also you will need longer screws I used #4 5/8 pan screw from the hardware store

Downloads
261
Likes
21
Rating
5
P
Printablestatsumi uehara

QIDI Q2 Part Cooling Fan Duct customizable

UPDATES 11/27/2025------------------------------------------ Changed the duct fins to center the airflow --------------------------------------------------------------------- No magnets are required and you can create any shape you want.…

Downloads
256
Likes
93
Rating
5
P
PrintablesSchwartz

Qidi Q2 Box: Cardboard Spool rings and Box Rear Roller

The Qidi Box has very limited space to fit ø200mm spools. During my limited first use, I had no problem running cardboard Polymaker and Overture spools. But the cardboard does wear down over time and I thought "no problem, I will print…

Downloads
255
Likes
41
Rating
5
P
Printableswasyl00

Quest 2 table tennis adapter - BonWasySX-Q2

Easy to print and assemble Quest 2 two piece adapter. Blade has thickness of 6mm so its ideal for use with rubber on both sides. Position Cloud code for right RH and left hand LH 262.107 BonWasySX-Q2 Printing instruction: Print handle in…

Downloads
245
Likes
27
Rating
5
P
PrintablesOllSEESllO

QIDI Q2 Effective Minimalist Fan Duct 2g Easy to Print

I have been using it for over a month now and am very satisfied. Features No original part replacement, easy installation Metal-free, fully 3D-printed PETG printable Only 2g, easy to print, no supports required Significant optimization:…

Downloads
243
Likes
34
Rating
5
P
PrintablesJack@KunWork

Qidi Q2 Toolhead Cable Secure Clip Due to Manufacturer's Machine Assembling Faulty

THIS IS NOT A JOKE! I strongly suggest you guys open up the back panel to check your Qidi Q2 machine first when you have recieved it. There is an assembling faulty which could happen on your Q2! By default, the toolhead cable in the back…

Downloads
235
Likes
51
Rating
5
P
PrintablesJack@KunWork

Redesigned Qidi Q2 Toolhead Model Cooling Fan Duct with Air Intake Fence

Description The stock model cooling fan duct sucks. Here I have redesigned one. The main purpose is to add air flow guiders so the cooling air could be more even and stronger. To maintain the dimension is important so it would not cause…

Downloads
231
Likes
50
Rating
5
P
Printablesfitandfinishlab

Qidi Q2 full width led mount

Let there be light! Simple led mount for Qidi Q2, angled at 45 degrees for optimal exposure. As you can see in attached pics there is waaay more light in the chamber now. Installation is super easy, just unbolt three screws in the front…

Downloads
229
Likes
45
Rating
5
P
PrintablesOppozith

Qidi Q2 LED Light Bar Full width

Expanded to full width

Downloads
226
Likes
29
Rating
4.4
P
PrintablesIPCreative

Qidi Q2 t-shirt printing stand

This is the "magic yellow box" from Qidi Q2 promos for printing on fabric. It's adapted for printing on Q2 (original model was made for printing on qidi plus4). This is V1. Qidi Q1 Pro bed is required (245x245), 4 rectangle magnets…

Downloads
224
Likes
67
Rating
4
P
PrintablesLittle Apollo

Qidi Q2 Lightweight Cooling Duct

UPDATES 11/16/25 Added versions of both cooling ducts for the smaller 4.1-4.5mm wide heat inserts. This is a lightweight fan duct based off of my original cooling duct design for the Qidi Q2. The duct with both heat inserts and bolts…

Downloads
219
Likes
73
Rating
5
P
Printablesweav

Qidi Q2 LED Light Bar

A mount for up to 200mm long LED strips up to 12mm in width. Uses existing screws so no additional hardware needed other than the LED strip you are mounting to it. Simply remove the two screws existing on the upper right front corner…

Downloads
215
Likes
33
Rating
5
P
PrintablesLittle Apollo

Qidi Q2 Hotend Fan Bracket for 2510 & upgraded 3010 fan

UPDATES This is a compact and lightweight hotend fan bracket for the Qidi Q2. The brackets have ducts on them to help guide the air where it needs to go. There is two version available, one is for the stock 2510 fan that comes on the…

Downloads
215
Likes
45
Rating
3.67
P
PrintablesEvgeniy Ermakov

Qidi Q2 solid spool holder

The original holder is hollow and doesn't provide rigidity under the weight of the spool. For improved rigidity, I also recommend making an insert to attach the spool holder to the printer's metal frame. You can download the insert model…

Downloads
214
Likes
32
Rating
0

QIDI Q2 poopBOX

This is a poopBOX designed for the QIDI Q2. You need to purchase this to use it. https://ja.aliexpress.com/item/1005009650808509.html?spm=a2g0o.productlist.main.1.63ef5d8ffaQ6tJ&algo_pvid=9a851485-aca4-4130-9f65-4b1ba24d6ead&…

Downloads
212
Likes
27
Rating
4
P
PrintablesPsych0h3ad

QIDI Q2 Z axis cover

Cut in half with slicer

Downloads
210
Likes
33
Rating
0
P
PrintablesDCPrint

Qidi Q2 Slim Poop Slide / Chute – Space Saver Remix

Material: PLA or PETG (PETG is better if the chute is close to hot parts) Layer Height: 0.2 mm Infill: 15% is enough Supports: No supports needed if printed vertically (standing up) Walls: 2 or 3 perimeters Installation Just slide it onto…

Downloads
209
Likes
11
Rating
0
P
PrintablesZ80b

QIDI Q2 fan duct - comparing alternative designs

Update 30/08/2026 To complete the update started on 28/08/2026, I am adding to this project two sets of STEP files: 1- The QIDI design with the modifications needed to match the original ABS parts. These changes include my best guess for…

Downloads
207
Likes
14
Rating
0
P
PrintablesNasty23

Qidi Q2 RISER PTFE TUBE LIFT & ALIGN CABLE CHAIN CLIP V1

for qidi q2 with riser got the qidi💩box for my q2 and in the intial headache stage of getting this pos working right Unhappy with the stock cable chain clips and with hope of smoother filament changing i desinged this to help lift the…

Downloads
205
Likes
29
Rating
5

Purge bin for Qidi Q2

only 63 grams of filament, fast printing - 1.2 hours, requires 4 magnets 5mm by 2mm.

Downloads
204
Likes
21
Rating
5
P
Printablesseendouble

Qidi Q2 Poop Chute, Purge Bin.

Wanted a nice clean purge bin for my Q2, have added Qidi logos to make it look OEM. Printed mine in green hyper PETG, works really well with the purged filament making it's way around to the front easily. 2 walls 10% infill and it feels…

Downloads
203
Likes
14
Rating
0
P
PrintablesAndygory

40x60 Fan Adapter for QiDI Q2

It is used to install a 60mm board cooling fan. It makes less noise. It cools better.

Downloads
202
Likes
50
Rating
5