Search results: racing

Sort order

1,523 models

P
PrintablesKajry

Lego Technic Oracle Red Bull Racing RB20 F1 (42206) wall mount

Wall mount for Lego Oracle Red Bull Racing RB20 F1 set 42206. This mount uses two gray pins on the bottom of the F1 to hold. You can easily see this pins trough the seat for easy hanging. Print settings: Infill: 30% 3D gyroid Perimeters: 3

Downloads
2,882
Likes
120
Rating
5
P
PrintablesRaegin

Wrench for Logitech G27, G29, G920, G923 racing wheel

Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…

Downloads
1,652
Likes
239
Rating
5
P
PrintablesRCHeliGuy

Racing Glove Holder

Holds Kart Racing gloves on a profile rig. Fits 40 series 120mm uprights on a profile rig. Uses a single M8x16 bolt to attach Has a rib that fit in the 40 series slot.

Downloads
1,140
Likes
152
Rating
4.8
P
PrintablesTizian Deneke

Sim Racing Handbrake V1

All the files that are required are downloadable and ready to print I made adjustments how the parts are printed and don't need to be changed but you can still change them if you want to use less filament. Also when assembling use…

Downloads
969
Likes
154
Rating
5
P
PrintablesTimosch_28

Chair Stopper (Simracing / Flightsim)

Summary Stopper for office chair for simracing and flightsimulators. Due to the round design, there is no need to adjust the wheels orientation. The model is fully parametric. A list of all variables and their default values: d_wheel =…

Downloads
505
Likes
97
Rating
5
P
PrintablesAlessiodral

Bike repair stand (gravel or racing handlebars)

The mounts are designed for handlebars + handlebar tape with a diameter of 40mm and increased ground clearance. I printed whit PETG them with 4 perimeters, 10% honeycomb infill, without top and bottom layers.

Downloads
298
Likes
48
Rating
0
P
Printableskhorben

Case for sim racing car spotter and flags

This is a case designed for an WS2812B RGB Module and an Arduino Pro Micro, as per amstudio's great explanation video at https://youtu.be/4oywox9-B-o . This provides real-time information for sim racing drivers such as the current gear in…

Downloads
261
Likes
46
Rating
5
P
Printablesplachytomas.cz

Fastener for racing track Ites / Faro / česká autodráha (sponka na autodráhu)

Main aim Cheap and simple replacement of the original fastener. That is buyable on https://www.ites.cz/eshop/dily-drahy/spony-autodrahy-24-ks.html Print settings PLA OR PET-G 100% infill 0.15 layer Notes Prepared 3mf file for Prusa Mini…

Downloads
167
Likes
10
Rating
5
P
PrintablesJernejP.

FOX Racing Proframe GoPro mount

I made my own version so it prints in the strongest orrientation unlike any i could find. I printed it with 100% infill with 4 walls. (7g and 50min on MK3S ) I added the .f3d file so you can make your own version. Just add two zip ties…

Downloads
113
Likes
14
Rating
5
P
PrintablesBartek Kolanko

Back for Logitech g920 racing pedals

💬 Summary A set of rear wall spacers designed for Logitech G920 racing pedals . These structural bumpers create a necessary gap between the pedal unit and the wall, ensuring that the connection cables are not crushed, bent, or damaged and…

Downloads
93
Likes
24
Rating
5
P
PrintablesTronnic

HTC Deluxe Audio Strap (DAS) Battery Mod for Anker 533 PowerCore - Quest - Pico - SIM-Racing

Hi, this is a powerbank-holder for the HTC Deluxe Audio Strap (DAS) & Anker 533 PowerCore PD30W Powerbank. Designed to sit on the top portion of the DAS in order to be able to lean back in a chair without a powerbank sticking out. Perfect…

Downloads
58
Likes
4
Rating
0
P
PrintablesJERRY

Elgato Stream Deck 32 + 6 Button Module Casing - SimRacing Button Box

The provided 3MF File is prepared with all my modifications. The Back Part needs Supports for Printing After Printing the Back Part, you need to punch through the 2layer supports for the M8 screw (if you want to use this Fixing Method) I…

Downloads
50
Likes
9
Rating
0
P
PrintablesEngGraph

Corsair Titan AIO Capswap Racing Style

With effective cooling, your computer becomes a racing machine. This very concept inspired this style—I know air cooling isn’t the same as water cooling :-), but thematically it fits perfectly.

Downloads
25
Likes
40
Rating
0
P
PrintablesPetvirus

H16E front shock tower with extra bracing for custom body attachment

I wanted to use a custom body I found for another variant of my RC car. I have an H16E deerc which is an mjx hypergo clone. My car did not have the same mount points that the custom body needed so I modified this front shock tower to…

Downloads
17
Likes
4
Rating
0
P
PrintablesRiotOne

Aprilia Racing Coaster

A multi-colour Aprilia Racing coaster printed in PETG. 15% infill 0.2mm layer height 0.4mm nozzle

Downloads
9
Likes
2
Rating
0
P
PrintablesArnomachal

Support de compteur PZRacing ST500 pour Kawasaki ER-6n

Ce modèle est un assemblage de 2 modèles : "PZRacing Start ST500 Laptimer Mounting Bracket for Yamaha R6 RJ27" de Knorrf1x sur Printables "Support d'indicateur de vitesse pour Kawasaki er6n" de Keep3r sur Makerworld Compatible avec :…

Downloads
6
Likes
2
Rating
0
P
Printables3D_Flow

Bike Stand / KickStand for Racing Bike

A BETTER VERSION NOW AVAILABLE !!!! LET'S GO CHECK WARINING → ALL BIKES ARE DIFFERENT, PRINT THE CALIBRATOR FIRST TO CHECK IF IT CAN FIT YOUR BIKE, IF IT DOESN'T FIT CONTACT ME TO SOLVE THE PROBLEM <3 → WARNING 3D-Printed Kickstand –…

Downloads
4,987
Likes
1,557
Rating
4.63
P
PrintablesChad_Taylor

Xbox Controller Racing Wheel 100% 3D printed - TEST FIT

TEST FIT TEST FIT TEST FIT Head here for the full Xbox design PS4 Version Available Here PS5 Version Available Here Switch Version Available Here Print and test controller clips to make sure they fit. 4 files provided here: 1: STEP file…

Downloads
4,858
Likes
1,774
Rating
4.2
P
PrintablesNikos Kar

Recaro Racing Seat Phone Stand

A beautiful and easy to print phone stand

Downloads
4,193
Likes
675
Rating
4.86
P
PrintablesChad_Taylor

PS5 Controller Racing Wheel 100% 3D printed - TEST FIT

TEST FIT TEST FIT TEST FIT Head here for the full PS5 design PS4 Version Available Here Xbox Version Available Here Print and test controller clips to make sure they fit. Two files provided here: 1: STEP file for those who'd like to…

Downloads
3,179
Likes
739
Rating
0
P
PrintablesZdrapek

Tracing ruler

This tool allows you to draw lines easily. it is quick to print and handy, and at the same time very useful. scales: 5-29 / 5-49 / 5-100 mm 0.25-1.25 / 0.25-2.5 in versions: -inlier - smoother surface, does not require supports -outlier -…

Downloads
3,157
Likes
1,998
Rating
4.46
P
PrintablesMichal Fanta

Racing Circuits - Let's build all Formula 1 Grand Prix tracks

Racing circuits building kit This is a part of a kit of racing circuits for all fans of motor racing, especially Formula 1 fans. Build all the Formula 1 Grand Prix race tracks. There are more than fifty different roads available. The set…

Downloads
2,695
Likes
1,826
Rating
4.89
P
Printableshi_im_sean

SOSP Sim Racing Pedal set

Sean's Open Source Sim Racing Pedal set- I designed these pedals because I wanted something better than the plastic boxes offered by logitech, fanatec, thrustmaster etc, without spending $1k USD for the high end pedal sets. These are a…

Downloads
2,679
Likes
339
Rating
5
P
PrintablesTurn Racing

Turn AMG GT3 DIY Sim Racing Wheel

Check out our Discord for wiring diagrams and resources on how to build these DIY Sim Racing Steering Wheels! www.discord.gg/turnracing This digital download is built as a sim racing design. After purchase you will be able to download the…

Downloads
2,063
Likes
136
Rating
5
P
PrintablesDropoff510

sim racing button box

here are some of the parts rotary encodors x3 PEC11H-4015F-S0016 Bourns Inc. | Sensors, Transducers | DigiKey push buttons x5 Amazon.com: ESUPPORT 12mm Black Waterproof Momentary Round Toggle Switch ON Off Reset Push Button Pack of 10 :…

Downloads
2,044
Likes
411
Rating
5
P
PrintablesPhilipp
Downloads
1,882
Likes
251
Rating
4.89
P
PrintablesmisterT

Simracing LED Flag Indicator

Simracing LED Flag Indicator based on an Arduino Nano and an 8x8 WS2812 LED matrix. You can indicate flags, gear, pit limiter, or whatever you like. If you like, you can put the diffusor cover on top. Frotn part with integrated diffusor…

Downloads
1,780
Likes
258
Rating
4.5
P
PrintablesGigaPenguin

Racing Pit Garage/Building for Hot Wheels & 1/64 Scale Cars

Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…

Downloads
1,773
Likes
491
Rating
5
P
PrintablesThinkSolutions

Olson Mask Tracing and Cutting Pattern

Everybody that can sew should be making masks now.... (written 4/4/2020) If you intend to make many masks, a rigid template for tracing and / or cutting can make things easier and faster. This pattern is for the Olson Mask that we are…

Downloads
1,771
Likes
18
Rating
0
P
PrintablesStanley

Audi DTM Steering Wheel for SimRacing

Project main site: https://www.thingiverse.com/thing:4891321 This is remix of Formula B1 - (Sim racing) steering wheel for Thrustmaster T300 RS wheel base. With other wheel mount or quick-release, this wheel could be also used for another…

Downloads
1,625
Likes
228
Rating
5
P
PrintablesAndrew B

Sim Racing Pedals with Load Cell

This is a basic set of 3D printed sim racing pedals using hall sensors for accelerator and clutch, and a load cell for the brake. I use the accelerator and brake almost daily for a little over a month as of the original posting - the…

Downloads
1,579
Likes
205
Rating
5
P

DIY Racing Sim Sequential Shifter

DIY Racing Sim Sequential Shifter Thanks for your interest in my DIY 3D printable Racing Sim sequential shifter. The idea was to design it to be strong & long lasting, but also cost effective and without any special components required.…

Downloads
1,560
Likes
276
Rating
5
P
PrintablesTurn Racing

Turn R8 LMS DIY Sim Racing Wheel

Check out our Discord for wiring diagrams and resources on how to build these DIY Sim Racing Steering Wheels! www.discord.gg/turnracing This digital download is built as a sim racing design. After purchase you will be able to download the…

Downloads
1,497
Likes
159
Rating
5
P
PrintablesHexAxis3D

Fox Racing Logo

Fox Racing Logo, in both keychain and logo. This model is licensed under the Creative Commons- Attribution license, meaning it can be printed and sold as long as there is proper attribution.

Downloads
1,472
Likes
100
Rating
5
P
PrintablesRaulito3D

Brembo Racing Brakes extruder visualizer

Do you like print like in a race? Then you will need a good brake (just joking). How to print it? - Can be printed with 0.4mm or 0.25mm nozzle, I recommend to use the 0.25mm in order to increase the quality of the letters on the brake…

Downloads
1,363
Likes
870
Rating
4.8
P
PrintablesAndrew B

Sim Racing Pedals with Load Cell V2

Last update: 2025-09-20 (Notes at bottom) This is a basic set of 3D printed sim racing pedals using hall sensors for accelerator and clutch, and a load cell for the brake. I've used all three pedals for ~1 month, daily, as of the original…

Downloads
1,334
Likes
445
Rating
5
P
PrintablesDaMaDo

Sim Racing Mouse Pad 40 Series

I used the 15 series version shown in the remix as a guide to make this one from scratch. They look identical so wanted to give credit. The fusion 3D file is also included for ease of remixing different sizes. I made this one in marble…

Downloads
1,331
Likes
239
Rating
5
P
PrintablesTizian Deneke

Sim Racing Handbrake V2

This is the second Version of the Sim Racing Handbrake. It uses less screws and should be easier to assemble. The Base and two side panels are now one piece for easier assembly. It may not be as good looking and reliable as the first one…

Downloads
1,262
Likes
221
Rating
4.5
P
PrintablesJosé Pedro

Mercedes-Benz AMG GT3 Evo - GT3 Racing Car Model

Capture the thrilling world of GT3 racing with this 3D printable STL model of the Mercedes-Benz AMG GT3 Evo. This powerful GT3 racing car model is perfect for motorsport enthusiasts and sim racers looking to display the aerodynamic…

Downloads
1,191
Likes
119
Rating
4
P
PrintablesTom Vít

IKEA Sannahed insert for LEGO Speed Champions racing/formula cars (3D + 2D printed)

Do you like interesting car models, especially F1, from the LEGO Speed Champions series? Give them a representative space in the frames on the wall. The available IKEA Sannahed 25 × 25 cm frames are ideal. First, print a test piece on…

Downloads
1,158
Likes
163
Rating
5
P
PrintablesJMoto84

FOX RACING Keychains/Key Tags

Fox Racing keychains/key tags

Downloads
1,130
Likes
121
Rating
4.88
P
PrintablesTurn Racing

Turn 3d Shifter DIY Sim Racing Shifter

Check out our Discord for wiring diagrams and resources on how to build these DIY Sim Racing Steering Wheels! www.discord.gg/turnracing The .zip folder includes: -Designed for 3d printing -Magnetic Snap action lever -M4 x 8mm spaced…

Downloads
1,119
Likes
94
Rating
0
P
PrintablesStenly_G

car rim and tire kechain - OZ racing prodrive P1

Check out my profile to see the full set of wheels and pick your favorite! OZ racing prodrive P1 keychain Tire- continental wintercontact

Downloads
1,116
Likes
148
Rating
5
P
PrintablesSmarThuis

LEGO 2556 Ferrari Formula 1 Racing Car

Disclaimer: This is not an official LEGO product. All design rights, trademarks, and intellectual property belong to the LEGO Group. This model is a fan-made recreation of the LEGO 2556 Ferrari Formula 1 Racing Car set, intended for…

Downloads
1,091
Likes
209
Rating
5
P
PrintablesK3NPrusa

Sim Rig - MOZA Racing Wheel Mount - 8040 Profile

Sim Rig - MOZA Racing Wheel Mount - 8040 Profile Ever felt like your additional racing wheel was just lying around and always rolling away? Well, with this holder, your extra MOZA Racing Wheel gets its own VIP spot on any 8040 profile!…

Downloads
1,078
Likes
134
Rating
5
P
PrintablesManus

Logitech G29 Racing Wheel - Formula 1 MOD

Original on Thingiverse: https://www.thingiverse.com/thing:4177079

Downloads
1,066
Likes
179
Rating
5
P
PrintablesFoldingBlade

Simracing Button Box [porsche 911 gt3 replica]

you will need buttons ,carbon plate (can be printed) and an arduino -------------------------------------------------------------------------------- carbon plate from where ever or print it. i used an arduino nano but you can use…

Downloads
1,003
Likes
87
Rating
5
P
PrintablesJERRY

Simracing Chair wheel stopper

A Chair Wheel stopper originally designed for the Secretlabs Titan. The Wheel have an diameter of ~61 mm and a with of 55 mm. The stopper has 2 embedded holes for 10x2 mm magnets for organisation and 4 holes for 10mm silicon feet to…

Downloads
973
Likes
40
Rating
0
P
PrintablesTurn Racing

Turn 488 Challenge DIY Sim Racing Wheel

Check out our Discord for wiring diagrams and resources on how to build these DIY Sim Racing Steering Wheels! www.discord.gg/turnracing The .zip folder includes: -3d Printable Files -Bill of Materials -CAD Files -DXF Files -Renderings…

Downloads
950
Likes
67
Rating
5
P
PrintablesTurn Racing

Turn Vantage GTE DIY Sim Racing Wheel

Check out our Discord for wiring diagrams and resources on how to build these DIY Sim Racing Steering Wheels! www.discord.gg/turnracing This digital download is built as a sim racing design. After purchase you will be able to download the…

Downloads
939
Likes
76
Rating
5
P
PrintablesRCHeliGuy

Cup Holder ( Sim Racing God )

This has a bit of attitude. I'm not sure I could even using this ironically for myself, but for the serious sim racers among you this may be more appropriate. This has the same dimensions as my other 32 oz Camelbak cup holder. It has 8mm…

Downloads
937
Likes
120
Rating
5
P
PrintablesChad_Taylor

PS4 Controller Racing Wheel 100% 3D printed - TEST FIT

TEST FIT TEST FIT TEST FIT Head here for the full PS4 design Xbox Version Available Here PS5 Version Available Here Switch Version Available Here Print and test the controller clip to make sure it fits. Two files provided here: 1: STEP…

Downloads
924
Likes
109
Rating
5

Rc F1 Boat With Outboard Mercury Racing 360

Build video https://youtu.be/SllnjgBfWdE?feature=shared https://youtu.be/PSYab_l4kDQ?feature=shared ####Mercury Racing 360 Outboard Engine### Outboard file link https://cults3d.com/:2254330 -This outboard has a height of 20cm -Suitable…

Downloads
877
Likes
106
Rating
0
P
Printablesacolombo

Logitech G29 Formula Style Steering Wheel Mod F1 Sim Racing

🔁 Compatibility The 3D prints can be used on any Logitech G29 , Logitech G920 and Logitech G923 . The only print that's specific to a Logitech variant, is the lower bezel , which at the moment is available only for the G29, or PS4/PS5…

Downloads
876
Likes
94
Rating
5
P
PrintablesLgkoki

Sim Racing Keyboard Holder

I made a design to easily access and store my keyboard. 2x M8 Screw.

Downloads
861
Likes
161
Rating
5
P
PrintablesMaybe_Prints

Office Chair Chock for Sim Racing

I designed these wheel chocks after trying to use racing sims with a wheeled office chair, this proved problematic as the chair would move when putting pressure on the pedals. I designed these chocks to fit standard 50mm wheels. They use…

Downloads
849
Likes
142
Rating
5

VW Bus Racing Designer Ed van der Heijden

VW Bus Racing Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA

Downloads
786
Likes
293
Rating
4.5
P
PrintablesDan Erbert

Next Level Racing - GT Lite / GT Lite Pro - Reinforcement

EDIT 18.11.24 Multi-Angle Baseplate Stabilizer: Some of you have asked for a variable one way solution for different angles. Santa came earlier this year. Here you go my fellow racers ;) Print Setup: 6 Walls + 4 Top & Bottom Layers 5-15%…

Downloads
775
Likes
76
Rating
5
P
PrintablesTurn Racing

Turn 911 GT3 R 2023 DIY Sim Racing Steering Wheel

This project includes over 100 .STL files, the entire assembly .STEP file, Grip & Molding files, a DIY guide and more! You can get all the files from this public Google Drive link:…

Downloads
766
Likes
122
Rating
0
P
PrintablesBTR3D

Racing Flag / F1

A good decoration for your racing corner. I've added 2 models. 1- Black and white pieces are ready for separately printing. You need glue for pasting white pieces. 2- A piece is ready for single printing with manual color changing. You…

Downloads
757
Likes
88
Rating
5
P
PrintablesSupra One
Downloads
747
Likes
89
Rating
4.5
P
PrintablesSimoste1969

Ferrari SF70H Steering Wheel for simracing Hub

*DISCLAIMER: This is a Work In Progress Project, so STL or code and program can change, also it is a complex build for expert thinkerers. I'm actually doing some universitary exams, so I have a little time to work on the project, but if…

Downloads
733
Likes
112
Rating
0
P
PrintablesJason Giroux

Sim Racing LED Light box Flag box

Assembly and programming Instructions with pictures and diagrams

Downloads
685
Likes
105
Rating
5
P
PrintablesAlex

Racing car

I wanted an STL of a vintage car with a fair amount of details, but that is relatively easy to print. I couldn't find anything suitable online, so I took a crack at designing one myself. This is what I came up with. The finished model was…

Downloads
683
Likes
184
Rating
4.88
P
PrintablesKristianEmil

Cupholder for simracing rig

Cupholder for simracing rig. Holes for M8 screws. Inspired by https://www.thingiverse.com/thing:4888859 but optimized for 3d printing, with less overhangs - No supports needed.

Downloads
673
Likes
70
Rating
5
P
Printablesbraga3dprint

KTM racing decoration

Introducing the "KTM Racing" Lettering Decoration – a versatile and stylish addition to your space. This 3D model features the iconic "KTM Racing" lettering, making it an ideal choice for KTM enthusiasts or anyone looking to add a sporty…

Downloads
654
Likes
98
Rating
5

Finish checkered Flag - Racing

Printed using a colour change for the white squares.

Downloads
633
Likes
48
Rating
5
P
Printablesopenscan

Racing seat for RC cars (3d scanned) scale 1:100

Finally, there is a website, where I will bundle all the information on the 3D Scanner, feel free to visit http://www.openscan.eu Scanned with my DIY 3D Scanner and processed in MVE, for more details on the scanning process and the…

Downloads
616
Likes
74
Rating
0
P
PrintablesIDazI

Phillips Hue Play Bar Mounts Sim Racing

Here is the Phillips Hue play bar mount that I made for my Hardware needed (per arm) - 2 x M8 Bolts & 2 M8 Tnuts - to bolt to your profile M8 x 40mm bolts and a nut of your choice, I chose wing nuts to be able to adjust them easily if…

Downloads
607
Likes
68
Rating
5
P
PrintablesTurn Racing

Turn Fiesta WRC DIY Sim Racing Wheel

This digital download is built as a sim racing design. After purchase you will be able to download the complete assembly in multiple formats. The .step files will allow the model to be edited in any CAD software. Each component will also…

Downloads
585
Likes
64
Rating
0
P
PrintablesSportRotary

Shifter gates & shift knob for USB sim racing shifter

Shifter gates: This keeps the same gate geometry and switch mounting as the original gates, but upgrades the thickness of the gate panel to feel more sturdy. The original shifter gates that came with the shifter were thin plastic. Shift…

Downloads
580
Likes
87
Rating
5
P
PrintablesKurt

Next Level Racing GT Lite Accessories

I've recently dipped my heel-toes into simracing... This led me to the decision that I can't truly simulate driving a race car without a cup holder and a phone mount. The cup holder is pretty straight forward, although a little bit on the…

Downloads
557
Likes
46
Rating
4.67
P
PrintablesPatryk Dampc

Vesa keyboard tray for Sim racing rig

Simple keyboard tray for keeping keyboard close in your sim rig. I found out that usage of desk monitor mount is perfect use case for having keyboard on adjustable arm. One model is scaled to fit on MK4 bed laying flat, the other one…

Downloads
554
Likes
116
Rating
5
P
Printablestimbo01

Chair Stop 60mm and 50mm for Simracing

2025-04-13: Added Version for 50mm wheels. Gap between the wheels is still 20mm The Chair stopper stops your office chair from rolling away. I specially designed thi to use my office chair for simracing. The Stopper fits 60mm diameter…

Downloads
551
Likes
29
Rating
5
P
Printablesjeremoche

0$* handbrake for sim racing

After testing a moza HB at a friend's house, I needed to make one for myself so I began working on this model. This HB is especially great if you already changed your logitech brake pedal spring and kept the old one. Otherwise, you'll…

Downloads
549
Likes
103
Rating
5
P
PrintablesHLFR ENGR

Sim Racing Cup Holder (For M8 Bolts)

This is a recreation of my 'Sim Racing Cup Holder' but redesigned for M8 Bolts Cup holder designed for sim racing cockpits to hold cans and pint glasses. Drink Responsibly. Mounting to 2020 Aluminum Extrude: 2 × M8 x 15mm Socket Head…

Downloads
547
Likes
53
Rating
5
P
PrintablesEduardo Gabriel

SimRacing DD Base for hoverboard motor

This is a project for a direct-drive sim racing steering wheel base enclosure using a hoverboard motor and an ODESC Mini. This is my first project using FreeCAD, and I essentially learned it during this project. The project is mostly…

Downloads
531
Likes
90
Rating
5

Vaessen Motorsports VP-2 - DIY Sim Racing Pedals

Introducing the Vaessen Motorsports VP-2, these are a long term project following on from the VP-1 pedal set I released. I liked that set, however it involved a lot of machining work which is not feasible for most DIY makers. I set out to…

Downloads
531
Likes
55
Rating
0
P
PrintablesTurn Racing

Turn 992 Cup DIY Sim Racing Wheel

This project includes over 100 .STL files, the entire assembly .STEP file, Grip & Molding files, a DIY guide and more! You can get all the files from this public Google Drive link:…

Downloads
528
Likes
57
Rating
0
P
Printablesmm0070

4" Sim Racing M2-DDU

A 4 inch DDU for your sim rig. I've designed it from scratch as I couldn't find anything that I liked. It has a USB-C connector and a USB hub inside. I've printed the front on a resin printer, but there's a version for FDM printers…

Downloads
527
Likes
54
Rating
0
P
PrintablesTurn Racing

Turn RSR-17 DIY Sim Racing Wheel

Check out our Discord for wiring diagrams and resources on how to build these DIY Sim Racing Steering Wheels! www.discord.gg/turnracing This digital download is built as a sim racing design. After purchase you will be able to download the…

Downloads
514
Likes
61
Rating
5
P
PrintablesDropoff510

BMW Sim Racing Wheel for Fanatec

I designed it to work with the podium hub from Fanatec. it uses an arduino pro micro BUTTON BOXES – AMSTUDIO (amstudioprojects.com) switches 4 way x4 Amazon.com: uxcell 5 Pcs 10x10x9mm 6 Pin 5 Way Momentary Square SMD SMT Tactile Tact…

Downloads
514
Likes
108
Rating
0
P
PrintablesMax Gripp

Simracing Laptimer (4" VoCore Screen)

Description Project: https://simracing-pc.de/en/2024/07/14/diy-project-simracing-laptimer-with-4-inch-vocore-screen/ Web: https://simracing-pc.de Discord: https://discord.gg/V5ZKUj3weJ Remix of the Vbox LapTimer RaceLogic (VoCore 4in)…

Downloads
512
Likes
81
Rating
5
P
PrintablesKatharsis

Dummy13 Racing Helmet

Its a helmet! The TPU insert is optional, but it makes the helmet look like it has padding on the inside and makes the helmet pressure fit on the head.

Downloads
500
Likes
106
Rating
4.5
P
PrintablesCurlyVole

Tiny Whoop Drone Racing Gate (fully printable, parametric, magnetic)

Print your own Tiny Whoop Gates! I hope this serves you well and feel free to give me any feedback or ideas for improvements. Have fun! Main loop This split into several parts (e.g. 4 or 6). These are just stuck together and hold well.…

Downloads
496
Likes
90
Rating
5
P
PrintablesMBLX

70º, 65º and 60º degrees angle triangles tool for triple monitors on sim racing setup

This is a tool to correct the angle for a triple monitors setup for sim racing

Downloads
491
Likes
28
Rating
5
P
PrintablesAmbasada3d

Max Verstappen - F1 Driver (Red Bull Racing) Leaderboard Keychain - Season 2025

Show your support for your favorite Formula 1 driver with this custom keychain design featuring Max Verstappen from Red Bull Racing . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a…

Downloads
489
Likes
64
Rating
5

Turbo Racing 1/76 Garage

*** EN *** * 24.6.2023 * V2 version - adjustment of the staircase to the correct scale. Racing garage (depot) with accessories for RC cars Turbo Racing 1/76. Includes separate parts for assembly. Some must be printed multiple times…

Downloads
479
Likes
72
Rating
5
P
PrintablesAlber

Suzuka International Racing Course

This is a faithful reproduction of the Suzuka International Racing Course. Its dimensions are 20cm long, 10cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple…

Downloads
479
Likes
45
Rating
5
P
PrintablesIn3DSpace

Logitech Racing Wheel Shifter Magnets

Shifter magnet add-on for your Logitech racing wheel. I tested this on a G27, but it should fit any of the newer Logitech wheels. Files: Logitech Shifter Magnets: Standard version that fits a thin M3 square nut with 1.8mm thickness.…

Downloads
476
Likes
74
Rating
5

Puch M50 Racing scale 1:8 Designer Ed van der Heijden.

Puch M50 Racing scale 1:8 Spoke rim only: without support Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 220 Filament material: PLA

Downloads
458
Likes
230
Rating
0

Racing drivers and many more bobbleheads

This is a remix of 3D Printy's Emoji Printer Bobbleheads to allow the fitting of my racing driver and other figure heads (which I've also included in this model). Due to the additional weight I find it best to use the “Stiff” spring from…

Downloads
453
Likes
150
Rating
5
P
PrintablesDerNiccoo

Gravelbike and Racingbike decor art / wall art / door art

The model is deliberately quite thin, make it thicker if necessary.

Downloads
449
Likes
89
Rating
5
P
PrintablesDaMaDo

Sim Racing Triple Monitor 4040 Brackets 60 deg

This lets me keep my triple monitor arms at 60 degrees and I can then make small adjustments with the actual monitor mounts on the arms. Stock settings in Bambu Studio Included are versions that just drop in and also a counterstunk 8mm…

Downloads
431
Likes
81
Rating
0
P
PrintablesDropoff510

Mclaren 720 S racing wheel

i printed all parts out of petg, and just printed out the face plate in two parts then used it as a template to cut it out of aluminum, youll also need some m3 brass press in nuts for back plate and shifters

Downloads
420
Likes
44
Rating
5
P
PrintablesKeyboardCrawlin

Racing Spaceship

A small racing spaceship that prints easily with no supports with a 0.4 or 0.6 nozzle. This model is very sturdy and doesn't have any sharp edges, making it is a "safer" 3D printed toy. I designed this for the LM Show Christmas Toy Drive,…

Downloads
418
Likes
94
Rating
5
P
PrintablesCurly_Luke

Citroen Racing keychain

Dual color Citroën racing keychain to show off Your passion :) If You would like to sell any of my designs, please contact me at [email protected]

Downloads
412
Likes
41
Rating
4.5
P
Printablesedmomot

Cable Management Clips for Next Level Racing Wheel Stand 2.0

Cable management clips that attach firmly to the different frame sizes on the Next Level Racing Wheel Stand 2.0. The stand is for sim racing. The flimsy clips it came with kept falling off, so I designed these thicker ones with correct…

Downloads
407
Likes
77
Rating
5
P
PrintablesOpulius

Toolstand RC Car Racing Drone Racing Tool Holder Parts Tray

This is my new Version of a tool stand for all (RC) hobbyists, mechanics and makers. I made it for all my tools I use frequently at the racetrack to maintain my car. I also included a tray to deposit all sorts of small parts and various…

Downloads
401
Likes
54
Rating
5
P
PrintablesJohnA

Sewing tracing wheel, no supports, prints in 2 pieces, 1 x M3 bolt and nut required.

I had plenty of strength and stiffness in petg printed with 6 perimeters of .5 mm extrusion. This prints in 2 pieces flat. Heat up the forks and bend them into the position seen in my photos. It helps to run it under cool water to cool…

Downloads
400
Likes
155
Rating
4.67