Ikea LACK Reinforcement
No support needed. Use 4x20 mm wood screws without predrilling.
- Downloads
- 1,531
- Likes
- 325
- Rating
- 5
473 models
No support needed. Use 4x20 mm wood screws without predrilling.
Dies ist eine Verstärkung um das durchbiegen im Heck entgegenzuwirken.
I include the Fusion source, so that one can adjust it to personal needs.
I printed the original Makita Vacuum Head Reinforcement by @Razzer09 but it cracked along the bottom after my toddler knocked the vacuum off of a table (further emphasizing the need for this part). This redesign features a uniform 2mm…
strengtheness the standard plastics taps on water barrels, increased wall thickness of the design, 3 to 5mm.
Introducing a sleek and robust truss structure style table reinforcement for Ikea's iconic Lack table. Increases stability and reduce shaking. Technical Details: Material Recommendation: PET-G or PLA. Installation Requirements: 64 screws…
The existing reinforcements aren't bad but ensure only that the Legs can't turn, with no support for actual stability or reduced shaking. My created reinforcements increase the overall stability and reduce shaking/wobbling, especially for…
Reinforcement - stiffening for IKEA LACK table. Stiffens the table and reduces vibrations . No supports needed. PET-G recommended. For one table you need 4 pieces . Material Recommendation: PET-G. Installation Requirements: 32 screws…
The IKEA Lack table is used by many makers to build a 3D printer enclosure. But the table is lacking stability, the legs are not connected to the table tightly enough. By the time the connecting screw gets even looser in the soft (pressed…
This model is compatible with the lego system.
A reinforcement bracket designed to stabilize all sorts of IKEA LACK enclosures. Use 4x20 mm wood screws for mounting. The upper leg screw holes need to be pre-drilled with the whole screw length, but you can also leave those empty as I…
Printable without support. PETG recommendet, everything else possible. Screw holes for 4x40 Woodscrews. Credit to Littleorangeprintthingy for the original design I oriented this on. Althogh I constructed everything form Scratch.
EDIT 18.11.24 Multi-Angle Baseplate Stabilizer: Some of you have asked for a variable one way solution for different angles. Santa came earlier this year. Here you go my fellow racers ;) Print Setup: 6 Walls + 4 Top & Bottom Layers 5-15%…
Уголок мебельный с усилением 25 мм.
Simply put, I've been using the non-mmu lack enclosure. I found the structure lacking especially in rigidity. Ironically the bottom table was fine, it was the top one that wobbled around. There also didn't seem to be a lot of angle…
Versteifungsplatte für Tamiya TT02 Top Deck for Tamiya TT02
If your robotic lawnmower digs in and destroys the grass on slopes, corners, around trees or shrubs, you can fix it with this geogrid. Just push/hammer it in the ground, and put some soil and grass seeds on top of it (or not). Grass will…
The Bambu Lab X1 & X1 Carbon use a PTFE bowden tube to guide filament to the print head. There is a little bit of wiggle, which causes the tube coupler to dig into the tube over time. I was never very happy with the amount of play allowed…
FIND ALL MY DESIGNS HERE : https://cults3d.com/en/users/Zuff/creations Do you like my work? Can you support me with a ☕ or maybe a 🍺? It all depends on the time 😄 --- I created this element to stiffen the frame of my printer. In addition…
I did not create these. These models were provided by Bambu Lab after it was discovered that the early versions of the AMS had a weakness in the roller supports and they had a propensity to crack and break. This is merely a mirror for the…
noticed that the cocking arm on the adderini gets a bit warped under strain... so I'm hoping this will help... time will tell. Also I think it adds a little more comfort and color. The screw holes line up nicely, just need a little longer…
Commercial use is NOT allowed for this model.
There are two versions are available: Large and small. I personally prefer the large version. Especially the large version creates a good grip and makes the handle more comfortable to use. You can use it as a handle while aiming /…
I made a zero cost draft screen for my printer !. Used corrugated cardboard boxes lying around. Printed in PETG with 10% infill. One print is a set of 4 brackets Please like and return you comments. Category: DIY
This reinforcement is only compatible with the V 10 coil. An extended screw is designed for this reinforcement, which tightens the reinforcement using the M8 thread in the reinforcement. I added another reinforcement design v2. The…
I printed mine in PLA with following settings: 0,20 - quality preset 4 Perimeters 5 Massive top and bottom layers and 25% Kubic infill
This is the same model as the Ender NG v1.2 toolhead base, but with a reinfocement bar added in the middle. This part is under a lot of stress with the belts. Combine this with higher tension, high-speed printing, and a heated chamber,…
Use brace_playseat_normal_xxx.stl when using the default brake pedal mounting or use brace_playseat_xxx.stl in combination with the ClubSport Pedals V3 aluminum extrusion mount. More information:…
Reinforcement plate for the left bottom bracket. The plate is fixed on the inside of the machine chassis and should be used together with the mod “Ender 3 V3 SE KE Gantry support”:…
My Makita Vacuum started cracking on the top part, so I quickly printed this reinforcement part. Designed for Makita DCL180ZB. Enjoy.
Increasing the arm stiffness of the multifunctional holder. It's still not ideal, but better than the original version. Added STEP version, you can adjust.
Reinforcement parts for a Peugeot 407 heater flap. As used in this video The steel spine is not shown here as it is not 3D printed but easy to make elsewhere. The parts were printed from PETG 5 perimeters with 50% infill to give as much…
I was unsatisfied by the long print time for such a small part, so I thought of a quicker way to do the same thing. With my 1mm nozzle it takes only 3 minutes with 0.4mm about 7 minutes Update V2.0: that thing snaps secutrely in place and…
TPU Propguards for Pavo20 with PETG inserts for more stability, but still bouncy and resistant. this is a modification of this Pavo20-replica whoop duct https://makerworld.com/de/models/53282?from=search#profileId-57500 PETG survived some…
For 0.25mm, 0.8mm, 1.0mm, 1.25mm and 1.50mm thickness of transparent PET shield. Original version often cracks. Print instructions I use 5 perimeters, PETG.
This is a slightly modified version of the bottom reinforcement to have a tighter fit with thinner plastic. The original bottom reinforcement was too loose on the thinner plastic sheets I'm using:…
This was inspired by the build of Chreutz https://www.thingiverse.com/thing:4207807 It worked brilliant, but I had issues with leg/knee space and wanted a glove box. So I rebuild it with very simple shapes from scratch. This mod…
How to print? Ideally larger nozzle and high layer height it doesn't have to win any beauty contest. Infill 100%, No brim or supports. Any PETG preferably the cheapest you can find, the cheaper the better. My print settings: 0.6 nozzle,…
The Odrive Mini’s USB-C port points straight up from the PCB, making it easy to bend or break if bumped. This guard reinforces the connector and reduces stress on the solder joints. Just print it and install it in place of the original…
I designed this, so it can be printed on the Ender 3 as well (because my modded Ender 3 is simply much quieter). It uses 8 M3 T-nuts and screws (use at least 8mm long ones, 10mm are most likely easier to install) Print instructions…
I thickened the sides of the bottom reinforcement to allow for two clean passes with larger (>0.5mm) nozzles without strange artifacts. Works well with 0.8mm nozzle and no infill. Print instructions Working great with 0.8mm nozzle in PETG…
2x M3x8 BHCS per brace 2x M3 nuts or LDO slide in nuts per brace Should work for pretty much any 1515 profile printer for ants.
This is remix of the bottom reinforcement for using 1 mm cover shield. The original one didn´t work for us. Print instructions PETG 0,2 - 0,25 mm layer
Printable Miata swaybar blocks. If someone can confirm fitment, I printed these 2-3 years ago and people have been asking so I dug the files up but not 100% positive they're the last iteration or on fastener sizes. Test fitted to ‘99…
Recommended settings: Material: PETG Layer height: 0.35 mm Infill: 100%
Original design was not tight enough for my needs so I resized it to 2.5mm thickness and increased the height to 30mm (also the original 15mm height is included)
This model has smaller dimensions (90mmx90mm) for my needs then original " IKEA Lack enclosure reinforcement supports " from Darazsweb. 4 pieces of 4.5x25mm countersunk head wood screw and 4 pices of 5x25mm pan head wood screw are used…
Instructions For each samla box, print: 2x stand leg 2x stand leg mirrored 2x structures For a 4 spools air-tight box you will also need from other sources: Quantity Item Comment 20 Printed washers 6 M8 washers Can be replaced with 12x…
Simple yet highly effective! This reinforcement prevents your X-Shot Longshot Pusher from breaking. Did your pusher already snap? Print, push, glue, and you're back in action. If it's still intact, print and install this reinforcement for…
The Ikea Alex drawers are a nice way to store and organize your stuff (I use it to store a lot of the parts in my workshop from screws to lathe tools, to 3d printer parts). They have a fatal flaw however: the bottom and back of each…
Needs a 12mm SHCS M3 bolt, but should be a lot stronger than the original without reinforcement
Every Ducato x250 owner knows that if you put too many heavy stuff in the central console storage compartment one (or maybe more) screw holes support may break. This three screws are removed on every car service to access air conditioner…
Italian: Se anche tu hai strappato il parafango anteriore fatto in moquettes a causa di una pozzanghera profonda, stampa questo utile rinforzo che evita di peggiorare la situazione. L'oggetto è stato provato su un Alfa Romeo Giulia…
This is my humble contribution to the Prusa Face Shield (TM) production. The Bottom Reinforcement, which is easier to print and assembly with 2 holes 80 mm apart. Why? Because the standard Hole Punch makes holes 80 mm apart. Currently,…
Parts Nut for M4 screw Screw M4 Allen Cylinder Head, length 30 mm or more Instructions For extra strength set your slicer to use more perimeters (e.g. 3). For extra strength use some stronger infill pattern as honeycomb or triangles, 25%…
Overview: Recently built the Stealth Press 1S but had one major issue… How flimsy the build plate is! This brace is designed to solve that flaw as simply as possible without needing to replace anything you might have already printed.…
Reinforcement bracket for IKEA LACK coffee table. Screws are #6, 1''. 1.25'' will work, but damage the face of the shelf
Diorama for Wekster Mini Law enforcement unit - Robocop This diorama has a lot of small parts but it's printed with almost no supports and should be easy to print and assemble. I had a lot of fun making it and painting all the details.…
This is a design to reinforce the Z axys Gantry on the Ender 3 S1 PLUS to minimize wabble. You need to print the Top Left and Top Righ part as well as one pf the 3 available versions for the bottom parts: V3 fits the stock printer (might…
Nose section reinforcement (optional) For engines with high power / high torque, I designed a reinforcement for the nose area. It is glued in with epoxy resin. It is primarily intended for LW-PLA fuselages. Print this in PETG. Verstärkung…
This stiffener was designed for the ikea table lack, but should also work for similar tables. In my case it was simply attached with super glue. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.2…
The DZP MK2 foam dart blaster has a design problem the screw posts that connect the plunger tube to the slide grip are not supported by any webbing, over time they can crack or show signs of plastic stress. This part is meant to provide…
The middle reinforcment of the carrybag of my wife broke. Some minutes in Fusion360 (longer than I like to admit) and I got a new one. Printed in PETG due to the heat in the car in summer it still holds up well and is easily reprinted. 20…
I added a reinforcement ring at the base of the center post.
My Jabra EVOLVE 40 headset breaks on the right "arm", so I created this reinforcement part. It can be used both to reinforce an intact headset or to repair (making it usable) a broken one. To have more stability between the printed part…
Support & renforcement pour l'axe du Nema17 de l'axe Y originellement conçu pour la Creality CR-10. S'emboite dans le profilé 2040 . Calibrage de l'extrudeur impératif pour l'emboitement dans le profilé 2040. Nécessite : un roulement…
Liked the recon reinforcements, so decided to adapt it for another wobbly stock. This stock probably won't work for any blasters with the extra bit at the back after installing the reinforcements. Hardware needed: 4mm×25mm screw & hexagon…
Not quite a remix of the Valve stabiliser for carbon road bike wheels as I modeled it from scratch, but definitely an inspiration, so wanted to give the credit. Sometimes a Presta nut doesn't sit quite right on a rim profile, generally…
Broomstick connection reinforcement for 25mm stick.
I designed these to reinforce the legs of the IKEA Table where my 3D printer is mounted on Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2mm Infill: 60% Filament: Digitalrise PETG White Category: 3D Printer Accessories
this adds strength to the body by clipping onto the roll bars in the bed. Two versions
Reinforcement of paper spool for eSUN
Hey Guys, just corrected my beltdrive angles and stiffened it up a little. The best update I made to my printer, belt tension is WAY MORE PRECISE and vibration is reduced too. The Bearing noise from the motors is gone!!! On the Gantry…
We made the mistake of keeping the arm held high on our 12-foot Home Depot Skeleton, and over the months, it began to tear away from the shoulder mount. We quickly designed and printed an inner and outer reinforcement plate. Recommend…
Hey! This is a roof reinforcement for the Arrma Granite rc car. With this reinforcement the roof is much sturdier than before. This prevents the actual body/case from getting scrached up or bending too badly if the car flips around. You…
IMPORTANT! DO NOT JUST PRINT 6 OF THESE. You'll need 3 Left and 3 Right braces -- so you'll need to MIRROR the design to get the second 3! Corner reinforcement for an Openbeam 2020 Kossel. I wasn't sure I needed these, but the lack of…
This is a customized insert for Undaunted: Reinforcements , from Osprey Games I decided to create my own insert for this game (that expands the games Undaunted Normandy and Undaunted North Africa) to be able to have all sorted out with…
you can print this in PETG, you need 2 of them screw them in the both upper corner, on the backside improve the stability of a Ikea Billy you can use 4mm wood screws
Both hinges of the case of my beloved little Makita DF330D broke recently → 3D print to the rescue! This part fits right in the gaps of the injection molded ABS case, which got a bit brittle over the years. Obviously, ABS would be the…
Bracket to reinforce the sink where you install a new faucet with 30-34mm installation diameter. Mitigates movement of the faucet when applying lateral forces by hugely enlarging the mounting area.
This remix fixes the overhang of the bottom reinforcement for Prusa face shield. Allowing you to print them at faster speeds without worrying about overhangs! It uses the same amount of filament as before but much easier to print and…
These are some simple angles to stop the Micke from wobbeling and improve its general rigidity. I used 4mm thick screws.
An elegant, budget-friendly solution for all your crochet granny square blocking needs. As someone who decides to do all their blocking at the end, instead of as I go… This model uses 1/4" wooden dowels (can be purchased at any craft or…
A protective sleeve for a key fob.
A set of reinforcement bars for my 3D printable rack system. You can use those bars to make the 3D printable rack more robust. This can be especially useful if you are wall mounting your rack. This model is part of a series of accessories…
A Shirt collar reinforcement suitable for collars with a Dimension of 10mm x 60mm. Its 0,75mm high so use 0,25mm Layer Height. Normal Stiffer are 0,5mm thick, i made them a bit thicker so they are more reliable. German: Eine…
Here is a highly detailed, futuristic miniature of a mechanized armor cop. It is perfect for tabletop gaming, sci-fi dioramas, or as a collector's piece for your desk. The figure stands on an integrated round base and is captured in a…
The shim comes in two parts one for each half of the priming sled. The pieces are labelled as such. Assemble them into the priming sled as seen in the photos. Because I used it specifically for a repair I super glued the shims in place to…
This is a theoretical max fill of the print bed for a Rostock Max v2 of the bottom reinforcement for the Prusa face shields. Print instructions One STL gets you 38 pieces in one print. Photo is my previous iteration of 34 pieces.
Hey, the metal cotter pin on my Playseat Challenge chair broke and I was looking for a simple way to fix it. I created this simple part in Tinkercad. Just insert it into the tube, put it back on the chair and lock it with an M8x20 bolt…
Z-axis reinforcement for Prusa i3 MK2 Reinforces Z-axis and helps removing Z-axis wobble for better print quality Print instructions BOM: 2x M8 430mm threaded rods, front Y axes replacement 2x M8 440mm threaded rods, Y to Z axis…
I made the reinforment to get a better angular alignment (perpendicularity of X and Y-Axis). That is also the reason why I printed it on my MK3S because the MK3s has perfectly aligned axes. The reinformcement is designed for M5 screws and…
Ikea BÅTSKÄR leg reinforcement to be able to mount wheels and hold the weight of a gozney dome. The video probably explains best how it works: https://drive.google.com/file/d/1EPvcd3F1K8oWjecm6nUqga08nSA9Reul So far everything holds quite…
After buying a replacement, I noticed that the tube breaks at the connection, so I made the attached piece to avoid this breakage in the tube. It is suitable for the dreame v9 -v9p vacuum cleaner and also the xiaomi, check measurements…
With the introduction of the new Prusa MK3(S) frame, I wanted to make my MK2.5S similarly rigid, if not more so. There were a couple great options, such as this: https://www.thingiverse.com/thing:1656945 This design and others came with…
the bottom part of the collapsible Katana has a tendency to break, this is supposed to fix that and spice up the look of your katana. I recommend to print at infill 40% and above and if you have not printed the katana, do it without the…
All the extrusions on the Prusa Mini are secured from only 2 points, even though there are 4 threaded holes on the end faces of the frame extrusions. These help make the Z axis a little more rigid.
This is an organizer for the Undaunted: Normandy + Reinforcements board game. This organizer was designed to store the content of Undaunted: Normandy combined with the Reinforcements expansion (Normandy content only). The unit cards for…
A corner reinforcement for the IKEA Bror cabinet making it more stable and square. It fits in between the bars on which the shelf rests and can be attached with a M4 screw and nut to the original holes in the Bror cabinet. I have made two…
The 4 knobs are now replaced with balls. They hold the Visor in place better so you do not need the lower reinforcement! Included are optional clips that add extra protection over the ball-knobs. Print instructions Same print setting as…