14,958 models
This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…
Print approx. €3.72–€4.54 excl. taxPreliminary estimate for PETGSource material: PET
A replacement filament spool holder for serveral Elegoo Neptune FDM 3D-printers. If you want a second spool holder, your spool holder broke or your spool is to small to fit on the original one. Supported Printers Elegoo Neptune 3 Pro…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
If you remove the PSU from your MK3 (for example to place it outside of an enclosure), you can use this brace to maintain the frame stiffness. This was tested with the older silver PSU mount Print instructions Prints without supports
Print approx. €3.62–€4.42 excl. taxPreliminary estimate for one variant
This model is best printed on its side or with the clip assembly at the top of the print. I advise against printing it flat, as when you insert it into the fan's foot slot it will split (unless you have adamantite layer adhesion lol).…
Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant
Second third and fourth picture are to show the difference between the original and the 3-D printed one original one is on the left and 3-D printed one is on the right To see the to see the original thing from Nintendo…
Print approx. €5.59–€6.83 excl. taxPreliminary estimate for one variant
I designed this to fix my TV stand. I bought it second hand so I don't know the brand but this piece looks like any other I've come accross. The diameter is 14.65mm and the depth is 11mm. I used calipers to measure the existing one I had…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
My head torch broke randomly when I was out on a hike and changing the batteries. I'd only had it for a month or two when it happened and didn't want to just throw it away because it cost a good £30. All that had broke was the latch that…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
One of the hinge pins broke on the lid of my Diaper Genie Complete model diaper pail. I searched everywhere online for a replacement but none are available. Rather than buy a whole new $50 diaper pail and send this huge plastic…
Print approx. €7.37–€9.00 excl. taxPreliminary estimate for one variant
This is my version of the classic Die Hard scene with Bruce Willis crawling through the ventilation with a lighter Christmas decoration. You can print a white fireplace with a lithophane of Bruce Willis in Die Hard crawling out of the…
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for one variant
Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
Tested it on my headphones, a tight fit but will surely work. I have added working height adjustment brackets too.
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
Hier habe ich 2 Varianten für Plastik-Spiralreißverschlüsse konstruiert; zum Einen die Variante PC5 für 6mm sowie die Variante PC7 für 7mm breite Reißverschlüsse. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt…
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for one variant
This is a replacement connector for vertical roller blinds with a ball chain. Ball diameter: 4.5mm Ball distance (center-center): 6mm The pieces usually stick together well, but a small drop of super glue can be used if you want. If you…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
After some time, my CAME TOP-432NA remote controllers started to fall apart. Since the electronics inside were fine I decided to 3d print a new housing for them. I made 2 versions because I had 2 versions of the controller mainly…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
DeWALT has a awesome heavy duty miter saw stand (link below) that is fairly easy to use as there are two clamps on the bottom of the miter saw that clip on too the stand. When somebody dropped the miter saw one of the black clamps on the…
Print approx. €3.80–€4.64 excl. taxPreliminary estimate for one variant
Replacement blade for the original Einhell Trimmer GC-CT 18/24 . If you are annoyed with your trimmer blades constantly breaking, consider using my string-trimmer head. It can use string-trimmer string or TPU plastic, both of which are…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for one variant
Check out the attached instructions.
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
This replacement coffee maker lid was designed to replace a broken original. It fits perfectly, as shown in the picture. The pictured prototype is printed in PLA, but I expect to print the final verion in PETG for improved heat…
Print approx. €4.88–€5.97 excl. taxPreliminary estimate for PETGSource material: PET
Die Original Slider des Reißverschlusses meiner Wellensteyn-Weste sind gebrochen; somit konstruierte ich in FreeCad neue Slider. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt werden. Der Bügel wird zuerst hinten…
Print approx. €7.61–€9.30 excl. taxPreliminary estimate for one variant
Battery holder: https://www.amazon.de/gp/product/B07JF8X8WY/
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
Designed at the request of my college, it's a functional replacement for the original Kuplung. Due to the size and complexity of the model, it's a bit tricky to print. I can share my experience, but you will probably need to find your…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant
A replacement for IKEA Brio / Lillabo train toy crossing gate. As the gates / barriers easily break off, this print can be used as a replacement. It was modeled from the original, with a few minor modifications to simplify printing.…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
It would be nice if you post your make. Thank you
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Come across so many broken ps2 disc tray covers while doing console repairs, seems inevitable at somepoint those without covers will out number those with. Heres my parts. You'll have to dab glue to it to mount it but better than not…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
The original rubber rings on my Logitech MX Master started to deteriorate and while replacing the thumb button with a 3D-printed replacement , I decided to replace the dirty rings as well. Added a knurling pattern to the ring for grip and…
Print approx. €0.03–€0.04 excl. taxPreliminary estimate for one variant
The clear plastic clip broke on my Wera Tool-Check PLUS (one of my favourite tools!) so I designed and printed a replacement part.
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
I am currently using this side mounted spool holder for my Qidi X-Max-3, but I wanted to take advantage of Vlad's non enclosed spool holder replacement but with an upgrade so that it uses bearings to allow the spool to rotate smoother. I…
Print approx. €3.39–€4.15 excl. taxPreliminary estimate for PETGSource material: PET
Hello, This is a brake duct that can easily be printed and installed to replace your long-lost or beat-up brake duct in your E36 BMW. Part numbers: Left (Driver) - Genuine BMW # 51712233361 Right (Passenger) - Genuine BMW # 51712233362 It…
Print approx. €12.89–€15.75 excl. taxPreliminary estimate for PETGSource material: PET
Just replacement of broken power button.
Print approx. €0.04–€0.04 excl. taxPreliminary estimate for PETGSource material: PET
I started from the design https://www.printables.com/model/108115-bouton-de-robinet-darret-wc made by Paterne and I added the stops to the bottom part so that the tap closes and opens on 1/4 turn (Blue arrows) Printing instructions…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Removing the rail from the packout is a chore. That little tab breaks off and you end up massacring the case. Now you can replace all the end caps with a much easier to remove system that allows you to add accessories to the rails of your…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
I frequently lose the movable part that enhances the grip on the tip of the Spring Clamp I use at home. This campaign motivated me to try printing replacement parts. ・I tried searching on Google Photos for the model number of this Spring…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
Since the door sliders in a garden shed break away and the replacements are quite expensive i remodeled the part. I did my best to replicate all dimensions, but was a bit liberal with the width of the rail for ease of printing. Since the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Temple (arm) replecement for oakley jawbreaker glasses oakley-left-arm-temple.stl contains bent temples, so their don't fall of your head oakley-left-arm-temple-flat.stl file contains temples which are not bent, so you can bend them…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for PETGSource material: PET
Print in ASA with 3 layer raft, draft shield 2 loops, supports and 15% infill.
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
Printed in ABS with 100% infill
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
This model is a replacement I made for the 2.4ghz mouse dongle shroud of my Razer Basilisk X Hyperspeed that snapped in half. I tore apart the mangled original shroud, put the PCB into the slot of the print, and then put the metal USB…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
This is a custom-designed replacement clip for the Black Diamond Cosmo-R 350 headlamp. It serves as a direct replacement for the original clip that holds the tilting part of the headlamp in place. Features: Nearly identical to the…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
The headband of my Koss KPH30i broke so I created my own replacement part. Why use tape or glue when you have a 3D printer. :) This also gets rid of the rather strong clamping force of the stock headband. Other mods: Yaxi Pads MMCX…
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement nut used to clamp the shade in place on my lamp's light socket. The factory's original part broke due to heat fatigue. I printed this model on my Prusa MK3S+ using polymaker's "Galaxy Black" 1.75mm PolyLite™ PLA…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
I recently lost the wrench to tighten the different bits on my Dremel 4000. With this 3d part, I can get my machine working again.
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Sadly my goto No1 / 3mm clipper cover for (Wahl trimmers) has broken and there is no replacement available without buying a full set This was made to be an absolute pattern fit and size to the original. If printing from STL you should…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
This Thing is a Renault Modus trunk shelf clip. It's very hard to find this one in car parts shops, without this trunk shelf is very unstable and may fall while driving. Tried to find this clip on scrapyard with no luck. This clip may…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
This replacement corner restores fit and function to your BAKFlip MX4 tonneau cover, ensuring secure alignment and durability. Instructions use original or any other screw to mount corner like previously. Category: Replacement Parts
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
Did your delicate porcelain sugar spoon snap in half because of your disgustingly strong hands? Worry not for now you can print a replacement which is much more durable!
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Tired of Hearing your Ender5-Plus sound like a jet engine? do you feel like every day, all you hear is tinnitus ringing in your ear as you sleep? FEAR NOT, for I have blessed you the file and setup you need to do in order to make your PSU…
Print approx. €10.62–€12.98 excl. taxPreliminary estimate for one variant
While in the process of creating my updated Stargate-themed game, I came upon the need for a “game spinner” to allow selection of 1-12 (just like using a pair of dice). I added the base included here to allow it to be used in any board…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
No supports needed Infill irrelevant Resolution: 0.15 Printed from PETG Scaled to 105% to compensate shrinking
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
Customizable backpack replacement part, can be personalized with your name using Fusion, easy to print. Note: Make sure the selection filter is set to ‘All’ 20% infill or more PLA or ABS.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Print this with the face laying on the bed. I recommend .15 or thinner layers to get enough material down. This is an application where a LESS stiff material like PETG is probably better than PLA. I have had good luck with all sorts of…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
The plastic piece that holds the shock mount for my microphone onto my boom arm just snapped in half, and I just hastily taped it back on with gaff tape for a while. I just decided to whip up something to replace it in f360. This is one…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
The first challenge I had when designing this replacement ski was the size. I had to split it in two to fit my PRUSA MK3S. The second one was to make it strong enough not to brake on first trial. Thanks to PRUSA Live 10 guest from…
Print approx. €12.26–€14.98 excl. taxPreliminary estimate for PETGSource material: PET
It's a replacement barrier for the Lillabo (IKEA) wooden train level crossing. The original (red) barriers break quite easily. These aren't much sturdier (it has two pins either side, one of them has a small diameter, so can't really…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
Because it broke and would break again, I designed this hitch raplacement eliminating further frustration. Trailer part in PLA surprisingly rigid even with the openings. more beefy grips firmly easy to use for the kids much freedom when…
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
This was a quick replacement for the original hitching rail, which was broken and made from a material that could not be glued back together. I recommend printing it upright to get a nice round rail. I used PLA from Das Filament in…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
“Imitation is the sincerest form of flattery” once Oscar Wilde said. I loved Andy's hanger replacement clip (linked below), but wanted to reuse my old metal hook. Instructions Take the broken part and remove the metal hook Print the…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
This model replaces the female buckle piece on my Northface backpack. It may be compatible with other brands that utilize a 15mm strap as well. It is printable without supports when printed vertically on its “legs” (the STL should be in…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
Replacement closure for a pet carrier. The spare part fits on a "Savic Transportbox Trotter 2 Pet Carrier". For better durability, be sure to use PETG. I hope this part is helpful to you - we have already replaced two as they like to "get…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
I was asked to make a spare PAW Patrol projectile, there are a few versions available but this one has a square head which I couldn't find online. So I created one in Onshape . Print at an angle with supports for extra strength. Feel free…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
I really liked the Fan Shroud 360 that Livius designed for the XL, but I also wanted a nozzle replacement tool that would work with this design. I also liked the XL Nozzle Replacement Tool for the Prusa XL Fan Shroud Mod that David…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
A simple replacement lid for the KINGrinder manual coffee grinder (will fit models K0, K1, K2, K3, & K5). Useful if you have misplaced or broken the original lid, or if you would just like to customize your grinder with a different color…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
I have the ikea Latt table and chairs set for my kids and i broke the seat when sitting on it (i guess I am too heavy for it when the seat was wet from a spill). I was unable to find a replacement seat for the chair from Ikea so I decided…
Print approx. €13.62–€16.64 excl. taxPreliminary estimate for PETGSource material: PET
A replacement axle for the Playmobil® Off-Road SUV (6889). Rotate by 90° to print in horizontal orientation, use support! Use sandpaper to grind down if it does not fit 100%. When wheel is sitting in place rotate it a bit until it runs…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
This is a replacement part for the tentioning part of the popular D'Addario guitar tuner. I Hope to help all you guitarists and bassists out there who have a broken tuner lying around. I did lots of tests with different materials, nozzles…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement latch for tubs/totes I purchased at the container store. The manufacturer is IRIS. There are many sizes but the latch seems to be similar with all the weathertight ones.…
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant
Update: This was my first self designed part and it is still in pretty good shape and works very well after nearly two years in service! With the red bracket broken, that holds the arm of the excavator in an upright position, fun was…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
Why I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier . The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
The feet on my box fan broke. So I took some photos, imported them into Fusion 360, took a bunch of measurements with a micrometer and boom. Replacement Feet on Demand. After I printed the first one I realized it was a little loose so I…
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
After having this OEM replacement handle break after a year, I looked to see if I could 3d print one for less. Found the original model on Thingiverse and gave it a shot. The original had sharp edges that didn't feel great on your bare…
Print approx. €2.29–€2.79 excl. taxPreliminary estimate for PETGSource material: PET
Printing | Recommend PETG or ABS, print hot, lots of perimeters and solid. Press onto the shaft and go. No supports required. I made these almost 4 years ago and they've survived several epic trips since. Hope you find them useful!…
Print approx. €1.21–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
Back Story My family has been in the poultry industry for over a decade. There are a few tools that are extremely helpful to have. These yellow pickup/grabber tools are a must have for the types of chickens we raise. With the frequent…
Print approx. €8.92–€10.90 excl. taxPreliminary estimate for one variant
Our kids love their Dyson toy vacuum. So it gets used quite often and from time to time looses its buttons. Most of the time we find them and put them back in, but lastly one got lost, so I made this replacement which fits very nice and…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
EN: Had a lid with a diameter of approx. 23.5 cm where the existing knob broke off. The hole for the screw measured 4.7 mm. I wanted the stem of the knob to also fit through the hole in the jar as a centering device and I also needed a…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
The mounting of the door tray failed on my BOSCH fridge. So here is a little Model to fix the broken mounting. This is a improved -more sturdier- Version 2. Printed with Prusament PETG Urban Grey . The print in the picture is from a MK4S…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Replacement Hydro Force Paddle Board Fin for inflatable paddle board.
Print approx. €4.99–€6.10 excl. taxPreliminary estimate for PETGSource material: PET
My toilet lever broke and I didn't want to buy a new one. This model is certainly not overengineered and the tolerances are pretty tight in most places but if you'd rather print one than order one for whatever reason (or just need a…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
As a user of the WD MyCloud EX2 Ultra network drive, I was very disappointed with the noise made by the very small internal fan. At night the noise was totally unacceptable, especially when the drive was performing a sync or a large file…
Print approx. €4.83–€5.91 excl. taxPreliminary estimate for one variant
Sealant Scraper Tool - Thumb or Finger Replacement Part :) Keep your thumb or fingers free from sticky sealant when you finish it after application. The corners are identical for each provided tool in the range of 9 to 25 mm in diameter…
Print approx. €3.21–€3.93 excl. taxPreliminary estimate for PETGSource material: PET
This Christmas stocking holder is suitable for flat tabletops, stairs, or fireplace mantels. Printed in PETG.
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
Supports are recommended. Use paint-on supports in the attachment-nook for where the arm attached to the frame.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Love Letter Favor Token — 3D-Printed Replacement (Single-Color) A clean, durable single-color replacement for the Love Letter favor/affection token. Prints fast, stacks neatly, and upgrades table presence without needing color swaps or…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
I first made this print to replace my broken turkey baster that I use to remove water from my plants' trays. I realized that it would be fun if I'd make it parametric so that everybody could repair their turkey basters if ever they…
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for PETGSource material: PET
This model is a replacement for the reverse/brake side of the trigger on the FlySky Noble NB4/NB4+ radio. I accidentally broke the Medium size, and then the Small size broke on me unexpectedly. There is definitely a weak spot in the…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
This 3D model replaces the original tray holder part for the Kinderkraft Enock high chair. Perfect for fixing a broken or missing holder with better stability of the tray (tighter tolerances). Recommended material: PETG (for better…
Print approx. €3.02–€3.69 excl. taxPreliminary estimate for one variant
It works better than expected. The acceptance criterion was that the mower must be able to climb a 100% / 45 Degree slope. The PLA print wears down on hard surfaces and stones but not as much as expected. Maybe if you have TPU at hand and…
Print approx. €14.51–€17.73 excl. taxPreliminary estimate for one variant
This is a simple replacement for the Contigo™ AUTOSEAL® West Loop Stainless Steel Travel Mug as there doesn't seam to be a way to buy replacement lids here in Canada. This has no moving parts so it doesn't autoseal. You'll also need a…
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for one variant
Description The original wheel on my Roomba had its splined hub stripped, so I designed and printed this replacement. The wheel disc is printed in PETG , and the tire is printed separately in FLEX and then assembled. The original parts…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for PETGSource material: PET
Everyone who has flown one of these models long enough has experienced a cracked cowling. This is a printable replacement part for Guillow's 504 Supermarine Spitfire balsa model airplane. A tiny bit of infill with single walls compares…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Given the disparity in our heights the front seats in her B200 are adjusted forwards and backwards rather regularly. This is done by lifting the lever under the seat, and scooting in the desired direction. However, while the Benz is in…
Print approx. €3.33–€4.07 excl. taxPreliminary estimate for one variant
I purchased the REI Co-Op Camp Stool to use while I fly FPV Drones. It is lightweight and collapses down nicely for packing-in and packing-out of flight spots. A combination of my body mass and soft ground caused the stock feet to sink…
Print approx. €2.94–€3.59 excl. taxPreliminary estimate for PETGSource material: PET
Balcony door handles are manufactured by several different companies. The dimensions are usually identical. Examples of companies include SRB, Inovatec (Part-Number: L120604) and so on. The balcony door handle consists of two parts in…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
Tupperware Quick Chef Replacement Gear and Adapter (3D Printed) Lost or broken the gear for your Tupperware Quick Chef? No worries! We have the perfect solution for you – a 3D printed replacement gear made from durable PETG material. This…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
Náhradní nožky pro M1T290 / Replacement M1T 290 feet Tiskové parametry / Print paramers: Podpory / Supports: Pouze na podložce / Heatbed only Výplň / Infill: 30%
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for PETGSource material: PET
After crashing my model rocket I had to recreate the base and fins. I'm including the source SCAD model so you can tweak it to your heart's content! Print in PLA using either Vase-mode or as few perimeters as possible. Remember, weight is…
Print approx. €4.03–€4.93 excl. taxPreliminary estimate for one variant
This is the replacement coupler for the Wilton Dessert Decorator Plus. The original breaks pretty quickly. There are no replacement parts that can be purchased so I created one. It works well but needs to be printed in very high quality…
Print approx. €1.90–€2.33 excl. taxPreliminary estimate for one variant
Replacemet dowel , not quit as good as the original from blum but better than no dowel or the usuall “so i have to get a bigger screw”. Note: use Pin_V2 the V1 was not as strong as I thought. Ersatz Spreizdübel, nicht so gut wie das…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
