Counting matching models…
Like the original supplied, my model has an end-stop in the flange to prevent it from falling off due to turning too far. I have completely redesigned this holder, which has allowed me to create different lengths and refine the mesh…
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for PETGSource material: PET
Ender 3 S1 secondary spool holder. Allows for you to hold 2 spools on the existing bracket.
I had a few extra tools I wanted to store, and loved the tool tray that rotates out, so I modelled this. Makes a great pairing with the original. It does not block any fans underneath.
MSI does not include the bracket for the secondary NVME SSD slot in the box with the laptop, you have to contact their RMA service for them to send you the bracket ! So that is what I did, and this model is as close of a replica as I…
A humangear GoTubb ™ inspired container, but much more minimalist, and much more fidgety! If you can print with multi-material, then you can even make the container look like oreo or macaron cookies! :) The Minimalist-10: Diameter: 35mm…
This is a remix of Tactical Grizzly's Ifixit Stand with an extra Slot for the Back cover so to has a dedicated place. I thought the model was perfekt and only wanted a place to store the lid of the IFixit Mako. The extra wall I added…
This is the Original file. Contact my Email at [email protected] if you would like modifications or permutations of the design to your specific needs. Despite the claims of Spencer3D on Ebay to the contrary. I also provide printing,…
The design is sturdy and saves about 800 g compared to a metal version. The dovetail uses the Losmandy mount points (3'') of the Celestron AVX mount and has alignment stops for easier mounting at reproducible positions. The parts are…
A Hadley remix for the secondary holder - The secondary bolt and washer are added via a slot without any need to consider the mirror - so you can glue the mirror in place any time you like. There is also no chance of backing out the…
This print houses a single Adafruit QT PY board with USBC connector. The top snaps shut and has two button cutouts to allow you to press the reset / PIN9 button. It has a small slit in the back for cables - I use it to wire in external…
Link for the screen: https://www.aliexpress.com/item/1005001704445373.html Infill: 20% Filament: PLA, PETG, ABS … Wall thickness: 3. Support required.
My take on SkyWatcher Heritage 130P improvements. This is definitely not the first redesign of this affordable but capable telescope. Depending on your goals it may not be your best option, see lordzurp's award-winning effort if you want…
I wanted to add on my existing Belkin BoostUp wireless charger (model F7U054), so remixed this. (and removed the ‘D’ logo ;) https://www.belkin.com/special-edition-wireless-charging-pad/P-F7U054.html…
This modified version of the Datum PCB mount allows for 3D calibration using a second fiducial mark! You can find the necessary PDF for the second mark on the OpenPNP wiki here:…
Wanted to make up a secondary wall mount for the Dyson V10 as our charging base is in the basement and I wanted a second one on the main floor and y'know stairs. Printed flat on the hexagon side using PLA at 0.2 Layer Height. Added…
Dell Wyse 5070 in Extended (fat) version have a little smaller hole for secondary ethernet port, than normal 5070. So there is small bracket for securing Ethernet port from this : Aliexpress M.2 key A+E RTL8125B network card…
Secondary mag release extension for the XSHOT Pro Motorized Piston Pump Toy Dart Blaster by ZURU. Hardware Required: 2 - M3x10mm screws Print Orientation: Outer sides facing down.
I needed some of these plastic clips spacers (anti crabbing clips) for my old Everest secondary glazing windows but could not find them online. So lets print them
This remix corrects a small bug where a curve in the finder mount obstructs the lip of the telescope (lordzurp is aware and is updating). BUT the real reason for it is to add a larger mount for a Crayford 1.25" focuser - 71mm base plate…
Inventum AC701 Secondary Intake Hose Adapter / Dual Hose Conversion This is an air duct adapter for the Inventum AC701 portable air conditioner. It allows you to add a secondary intake hose to the rear intake side of the unit. Single-hose…
Secondary mirror spider holder for my Celestron FirstScope 114EQ telescope
This adapter allows an Ethernet port to be mounted in the Flex IO slot originally used for an extra display output. This was designed for a ProDesk/EliteDesk G4, but it may fit other generations of HP mini PCs. The adapter is designed for…
A carbon filter that attaches to the back back of a Bambu Labs X1C and P1S over the exhaust fan. Requires: 4X M3 Countersunk Bolts ( 6mm, preferred but up to 20mm should work). 4X M3 Heat set Threaded inserts ( 5mm long and about 5mm…
A second spindle to hold an additional spool of filament for the Elegoo Neptune 3 series 3D printers to simplify switching between 2 different filaments, especially for multicolor prints. It simply slides into the existing filament…
For my Baddeley MKIII Astromech, I wanted to isolate the body electronics from my main electronics board in order to simplify and dramatically reduce the wiring and cable runs required to route all the servos and lights from the front to…
I am a wire management freak so I needed a clean wire clip/solution for my rear mounted battery to the Oculus Quest 2 headset. I run the headset wirelessly, so no need for an additional tether clip. The single clip is for a 3.5mm wire…
Skywatcher 150p Virtuoso secondary mirror holder with 58mm spacing between bolts for focuser. Maybe you can edit it for your focuser. For the secondary mirror you can use 3 heat inserts and the original hardware from the stock secondary…
Voyager -Intrepid Class Star Ship Remixed secondary hull to accommodate for an optional open Shuttle bay. Check out Martin's original model. Great Design & ingenuity. Original model is absolute quality, & now with the optional open…
A special spacer is used to set the horizontal spacing of 21700 cells so that the height of the pack fits within a onewheel XR battery enclosure. This secondary spacer allows the addition of more than 15 cells.
I've found my z-axis on my Ender 3 Pro wobbly, but I am hesitant to make major alterations to a printer. If you are like me, you might appreciate this very non-invasive extension for Ender 3 Pro which enables you to add a second threaded…
Design The tube end ring is combined with the secondary mirror spider. The mirror holder is centered by design, it is not possible to adjust the center position of the mirror holder and therefore the mirror. The standard secondary mirror…
Ein Zentrierwerkzeug zur Ausrichtung des Fangspiegels in einem Newton Teleskop. Der Tubus wurde mit einer 0,4 mm Düse auf einem Prusa MK4 aus Prusa PLA gedruckt. Die Zentrierringe wurden mit einer 0,25 mm Düse auf einem Prusa Mini aus…
This is a belt change tool specifically designed for the Polaris Defense MRZR-D. It is based on pictures of tools available for sale on amazon, but tested on real clutches. It may work on RZR side by sides, but I haven't tested those…
Design The tube end ring is combined with the secondary mirror spider. In my opinion, it makes no sense to screw on the tube end ring and also the spider for a 3D-printed part. The mirror holder is centered by design, it is not possible…
I made a model of the primary from the secondary antenna of the locator
A variation on the theme of secondary radar
Thinner designed for other spool sizes - changed diameter and length Remix of: https://www.printables.com/de/model/158734-ender-3-s1-secondary-spool-holder/files I got some more unusual spool sized which couldnt fit onto the orignal spool…
These are the mirror covers for the 8 inch or 203mm Leavitt telescope
I have a tank that supplies a drip irrigation system on my balcony. For months, it sat with a tube and wire coming out directly with mere plastic wrap protecting the water from airborne pests like mosquitoes. It was an ugly and cheap…
Bridge Based off one found outside of Brown's Yard in Old Bridge NJ. Can designed to be printed on an FDM printer in Quarters, center of the bridge Face down on the build plate. Spacing of the bridge is intended for Double Kato Unitrak…
Tired of not having a way to store the Ikea Pressa when not in use without it taking space? Print this hook and stick it at the bottom of the thing, it will snap in place and allow you to hang it upside down, closed, without the octopus…
While building this M&M Sorter, I found that the Secondary Funnel and Final Divider didn't fit well with my standard servo. So made some slight adjustments so that they now fit correctly and the two parts will be a mere 1mm from each…
I was getting bad "comet tail" like flares in my astrophotography images (only on one side) from bright stars. I tracked it down to the bevel edge of the secondary mirror in the Apertura CarbonStar 200 telescope. Seems some of these…
A replacement secondary mirror spider for the SkyWatcher Starquest 130p. The original secondary mirror holder on the 130p comes with three vanes, which causes six diffraction spikes on bright stars. This one has four vanes to give the…
Meant to be used to cover the 62.5mm secondary mirror in Leavitt LITE May be a bit of snug fit since you don't want dust getting in, may need to sand a little bit.
If you have or know someone who has a meade lxd55/75 SN10" and needs to center the secondary, I provide you with the 3D files of these parts that allow you to set the concentricity and rotation angle of the secondary mirror with great…
A secure, threaded container for storing and protecting Smallest telescope 's removable secondary mirror assembly. This model is designed to hold the mirror glued to its support. The container features a custom-shaped recess that…
Printed in PC, other Materials may work, but not testet by me.
Objective / intention If you change the secondary mirror, the so-called offset must be taken into account when gluing it onto the holder. That's a bit tricky. With this assembly aid, it can be done very easily. The design was done in…
I made this stand to allow a 6.86" Thermalright Trofeo Vision to be used in a tiny Micro ATX case. Not for the computer pictured , but a much smaller case. I wonder if it also might work on the 9.16” version too… The design uses 6mm…
Sill in progress: So one day I was building a truckputer because I was severely disappointed with Panafonic chinesium poor quality receivers. So I bought a 7" 800*480 LCD and driver board from ol' ebay and then played with it. Long story…
Something went wrong exporting. The STL needs to be scaled to 10%.
I really liked the sleek standby mode docks created for iPhones, but those were often designed to exactly fit the phone and not other sizes. For this design, I opted to create a universal variant that will work for any size of phone,…
**Important Notes:** * **This is a user-created design.** It's crucial to verify compatibility with your specific telescope model and make any necessary adjustments. * **Collimation is essential.** After installing this spider, you will…
Increasing the backfocus by bringing the primary mirror closer to the secondary mirror with a Skywatcher Newton 150 mm (6"). In my case, I could not reach the focus point when using a Baader Clicklock, which is about 18 mm wider than the…
Enjoy sharp, crisp views without spikes on stars! Not much to say. Use silicone adhesive, 26 gauge steel wire and haywire twists (or guitar string) with 8 guitar tuners spaced in a square normal to your focuser. The secondary I used is…
These holes are designed for applying small blobs of aquarium silicone, providing a flexible, stable, and stress-free way to secure the mirror. ⚠ Notice: When using PETG or other filaments with low surface energy (such as PC), silicone…
I was trying to think of a way to protect dust from getting into my mirrors through the large secondary mirror cover. I created this adapter that perfectly fits the secondary mirror cover. Please print it top-down and superglue it to the…
This makes removing a speech module from an S10 easy. Use with a 1" spanner, adjustable wrench, or just your fingers. The module will then pop out when pushed from the rear. I found using a flat screwdriver at the edges effective. If you…
I lost the secondary spur gear for my Schmidling Maltmill in a cross country move, making my Gear Drive option just a passive roller. The Gear Drive Option is/was great, turning one roller slightly faster than the other, not only crushing…
Loosen the screws. Put 3 of the shims behind the front plate to ensure a distance of exactly 5mm. Use a laser collimator to rotate the mirror to centre and then tighten the centre screw. Remove the shims and fine adjust the mirror using…
https://a.co/d/8g59rQB When you buy a hygrometer it comes in a pack of 2 - this is a secondary wall mount (with 3M) This allows a secondary humidity reading away from any of the silica beads, etc. Print, pop in the hygrometer, apply 2…
This is an angled mount that fits between the Z-motor and AC receptacle of a Voron v0. The back panel stoppers on the bottom skirts may need trimmed for this to fit, as shown in the photos. The clamping mechanism from the original mount…
This is a simple secondary mirror mask I made to ease collimating the focuser with a laser. If you have trouble with it like I do this makes it quick and easy. This is sized for the RC8 secondary baffle tube. I have supplied the FreeCAD…
I had issues with my car's parcel shelf popping out from its mounts completely through daily use. I've designed these extra tethers to keep the shelf in its mount even if it comes loose. Print in any heat-resistant material, like PETG,…
Print is simple and will probably work with any reasonable settings. Print flat side down for both parts. I printed mine with a 0.6mm nozzle at 0.3mm layers in black Overture PLA. The threads are a little tight intentionally so they don't…
Secondary winch switch for Outlander G3L This takes Warn mini switch inside. I Installed snowplow tilt to work via this switch.
Mount a smaller version of the LumenPnP's datum board, without moving the primary fiducial, to enable 3D calibration. This is second revision of this model, moving the secondary fiducial to OEM secondary fiducial location, removing the…
made this to prevent spilling deisel in the process of removing secondary filter on the cummins x15 engine
An extended filament guide, specially designed for 2.5kg spools. This model is an enhanced version, perfectly compatible with the popular spool holder adapter for MK3/MK4, available on…
Increasing the backfocus by bringing the primary mirror closer to the secondary mirror with a Skywatcher Newton Skyliner 200 P. [ 200 mm / 8" ] In my case, I could not reach the focus point when using a Baader Clicklock, which is about 18…
holder for a 3.5 inch ips screen. I found mine on ebay to display my cpu,gpu temps. you can set it up with their software howerver you want. it sits under my audio interface on my desk beside my monitor. the screen fits a little loose but…
I wanted to mount my new Anna Thermostat but realized the original mount didn't leave a gap for a secondary cable like the e.g nest does. In my case the secondary cable was for a tablet charger for a smart home dashboard that is above the…
Quick and dirty replacement enclusure for a secondary key fob (small oval one, without LCD) of Anaconda GS-series car alarms. The original key fob is in the photo. If yours looks the same, this 3d printed enclosure should work, as the…
I printed the egg in PLA with 0.1 mm layer height and organic supports, on build plate only, and up to 30° overhang. I removed the supports, cleaned the print, and inserted a TPU filament in the groove (about 64 cm in length).
I use 3mm layer heights and 15% infil. I did use custom supports in Cura, but it depends on how good your bridging is.
Support pour écran secondaire 3.5 pouces Lien Aliexpress: https://fr.aliexpress.com/item/1005004596033931.html?spm=a2g0o.order_list.order_list_main.5.565b5e5buLIQUu&gatewayAdapt=glo2fra
I can’t really come up with a good scenario for why you would want to swap sides with the stock Ender 3 extruder (weight balance maybe?) but if you have the dual-z upgrade installed, this will let you do it. this was designed for my own…
Prints fine on a BugBu 210 printer. Designed to hold a Meanwell 5v 5 amp PSU to power the Raspberry Pi on the BugBu printer. I was constantly getting “Undervoltage Detected” errors on my Pi when connected with a buck converter through the…
This secondary intake was designed to complement the Dynamic Intake and expand on its capabilities. It allows the Dynamic Intake to function purely as a ground intake and takes the job of scoring. The Secondary Dynamic Intake has a…
Butée d'étanchéité pour fenêtre et porte-fenêtre (ouvrant secondaire) Voici une pièce de remplacement que j’ai modélisée pour remplacer une butée cassée sur une fenêtre ou porte-fenêtre . Elle se fixe sur l’ouvrant secondaire – celui qui…
This mount allows you to attach a 300W secondary 24VDC power supply to the back of your Prusa Core One. I needed this for my chamber heater ( link ), but I uploaded it separately because it might have more general use. The mount takes a…
I had trouble printing the little grate for the speaker so i made this. It's a lot easier to print and i think it looks pretty cool.
For Aliexpress type projectors on your S60 R or V70 R, you can use this washer to aim the headlights higher and lock them in rotationally. The puzzle piece cutout lets you open a gap to slide it over the wires in case they are hard wired…
I installed this shower head into my shower and didn't like the secondary shower head being just below the primary shower head. I designed a mount that I could hang onto the side of my shower to hold the secondary hanger. Since the…
Slot for mounting a second USB port on the Peugeot 3008, Citroen C5, and other PSA models with the same button layout. It replaces the card holder on the dashboard to the left of the steering wheel. A switch panel in the same format is…
Secondary mirror supports for OTA Celestron C8 1983 Two repair parts. Category: Physics & Astronomy
Use a filament that will be safe around engine bay temps. I used CF Nylon 12. Seems to be holding up well. Use Tpu for the gasket. 100% infill for both parts.
This model can store your caps efficiently in your closet and can hold many caps with the attachment hanger. It is very useful if you own a large amount of caps.
There is a bit of clearance above battery cells and for generic bms, no supports are needed, lid can be printed but not required it's already too thick as it is so case can be mounted directly without lid, if proper insulation for cells,…
Box to store your smallest or equivalent telescope with a 42-46mm secondary and magnetic mount. Put a little PTFE pad on the pressure thumb.
wanted to get a more rigid secondary mirror spider, but all the ones available had weird mounting solutions like 5mm m8 bolts so i made this one with holes for m5 heat set inserts Category: 3D Printing
Upgrade your custom telescope build with this precision-engineered secondary mirror mount component. Designed specifically for Newtonian reflector assemblies, this 3D-printable holder features an exact 45-degree angled mounting face and a…
Notice: I had to put some tinfoil under the replaced battery to make the contact work The pebble key (or "Steinschlüssel" in German) of the Fiat 500e has a non-replaceable battery. When after 2-3 years the battery runs out, Fiat wants you…
Charles Louis de Secondat, baron de La Brède et de Montesquieu — Buste Français Ce buste de Charles Louis de Secondat, baron de La Brède et de Montesquieu est inspiré de l’un des portraits les plus populaires et reconnaissables du célèbre…
Custom 3D-printed rear bracket adapter designed for the HP Thin Client t540. It allows you to cleanly install a secondary RJ45 network port / M.2 / PCIe NIC module into the factory expansion slot cut-out, making it ideal for building a…
My first design and contribution to this wonderful community. We are used to seeing many Chinese New Year greetings with standardised greetings. The greeting used here plays on the chinese name of Jurongville Secondary School - 丰嘉, to…
The Loop Master is more than just a stylish mini arcade – it’s a fully functional, customizable game experience that puts creativity and fun right at your fingertips. Design your own world block by block with a simple click mechanism and…
This is a rigid cover for the secondary mirror on the Hubble Optics UL18 dobsonian telescope. The "mount" portion screws into the secondary holder using the pre-existing screw holes, and the cover simply screws on over that. Printed in…
