SEEED XIAO Expansion board base caver
M3 self tap screw or Normal M3 NATs and Bolt to Lock each things.
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
- Downloads
- 223
- Likes
- 25
- Rating
- 5
293 models
M3 self tap screw or Normal M3 NATs and Bolt to Lock each things.
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Features: Designed for Cherry MX compatible switches. LED Window to leverage the built-in RP2040 neopixel RGB LED. No screws! Mechanical peg holders for the RP2040. Snap cover. USB port access hole on the back of the macropad. Cute and…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Features: Designed for Cherry MX compatible switches. LED Window to leverage the built-in RP2040 neopixel RGB LED. No screws! Mechanical peg holders for the RP2040. Snap cover. USB port access hole on the back of the macropad. 11 keys…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to make a small case that protected the Xiao while also making things look a little cleaner. This is the smallest possible case I'm personally able to design and it snaps together pretty easily (though it is a tight fit). I…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Introduction A slim compact case for the ESP32-C5 XIAO Seeed with external antenna. It provides ample room to slot your ESP32-C5 in with an added lip/catch to keep it in place. If you need to remove the board at any time, a ~2mm hole in…
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
I've been using the Seeed Studio ATX PSU breakout board for a while now and nearly had an incident by leaving the board floating around the desk with lots of metal bits around. I decided to make a simple cover for the bottom to prevent…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
Seeed Studio ESP32C6 + HiLetgo MAX98357 + CQRobot Speaker Case Dimensions: Speaker - https://mans.io/item/cqrobot/cqrlb4o3w-b Amplifier - https://www.adafruit.com/product/3006 ESP32C6 - https://www.espboards.dev/esp32/xiao-esp32c6/ No…
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for PETGSource material: PET
This is a parametric rugged box adapted to house five Seeed Studio XIAO ESP32-C5 boards. The setup consists of: 1 XIAO ESP32-C5 used as the controller 4 XIAO ESP32-C5 boards used as nodes A power bank used to power the complete setup The…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the PETG versions of the case) which has…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO ESP32C3, an Arduino & CircuitPython capable RISC-V board with Wi-Fi, Bluetooth and USB-C that comes with an antenna and costs $4.99. The product page for this device can be…
Updates 13/07/2024 - Added bottom with holes 05/10/2023 - Added filet to the case ---------------------------------------------------------------------------------------------------------------- Case for Seeed XIAO ESP32-S3. Used STEP…
This is a simple case for the Seeed Studio XIAO-ESP32-S3. It has an option with an extra plank that you can stick the external antenna onto. The lid snaps on without any screws or glue. This is an initial model for basically the device…
Seeed Studio XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and…
Change log 2025/01/01 Added STEP and Fusion 360 source files. 2025/12/08 Added v10, only change is 5mm taller walls NOT for commercial use, if you want to sell these please get in touch. The charging cradle/puck prints with no supports…
Seeed Xiao BLE snap fit case with reset button, designed to be used as a dongle/central device for ZMK Firmware. Updates 06/01/26 - removed unnecessary features, small tweaks; added step files 10/12/24 - added ejecto 🚀 hole for easier…
If you need to buy the tracker: Seeed Studio SenseCAP Card Tracker T1000-E Make sure to use coupon code B737HUW8 for 10% off. Commercial Use and Attribution Notice: Alley Chat T1000 Holster © 2024 by Alley Cat and Majestic AV, LLC. is…
Material used: One 40MM Mini Audio Portable Speakers, like a this one . 3x M2x20 screw, 3 feet made of 3mm rubber (see photo). ReSpeaker XVF3800 from SeeedStudio: https://www.seeedstudio.com/ReSpeaker-XVF3800-USB-Mic-Array-p-6488.html…
This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…
Snap-fit case for Seeed Studio XIAO ESP32S3 UPDATE: Added STEP file for the model for future improvements and modifications by the community. Please respect the CC Attribution Non-Commercial license. Features: Snap-fit case, no additional…
Tube Case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html Print Settings: PETG 0.2mm layer 4 walls 15% infill add support on everything…
Seeed Studio XIAO ESP32S3 Sense leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB…
The box is made of 3 parts and the cover and carrier are universal for whatever base will be used. The base is specific designed to house an LD2410C sensor.
Seeed Studio XIAO ESP32-C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivities. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.…
This is a custom case for the Wio Tracker L1 E-ink kit from Seeedstudio . The e-ink display that comes with the board is somewhat large but I tried to get the enclosure as pocket-able as possible. I uploaded two versions of the front with…
Remixed with the intention to use the Xiao Sense camera as a facial tracker with Project Babble.
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO nRF52840, which is an Arduino & CircuitPython capable Nordic nRF52840 board with Bluetooth 5, BLE and NFC that comes with an onboard antenna and costs around $9.90. The product…
(Description from original author) WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the…
Case for Small RP2040 Boards This is a case for the small RP2040 boards such as the Adafruit QT PY RP2040 or the Seeed XIAO RP2040. These small boards based on the Raspberry Pi RP2040 microcontroller. They have a USB interface and are…
A compact tube-style enclosure designed for the Seeed Studio XIAO nRF52840 & Wio‑SX1262 Kit . This case is suitable for portable Meshtastic or MeshCore LoRa nodes , powered by a single 18650 Li-ion battery. The cylindrical design protects…
Seeed Studio XIAO ESP32-S3 leverages ESP32-S3's 240MHz Xtensa 32-bit LX7 dual-core processor, supporting both WiFi and BLE 5.0 wireless connectivities, a 2.4GHz Rod antenna, allows for deep sleep mode with power consumption as low as 14μA…
I've included a Reverse Model for use with some 3rd party chargers. Fusion 360 File included!
2025/02/03 Added STEP file A collection of cases, frames or holders for the Seeed Studio SenseCap T1000-E. Any ideas welcome, please add your suggestion in the comments. Printing info (I use Orca Slicer 2.2.0): up right no supports needed…
Should print fairly similar to the original design, I found my best results though at 0.16 layer height and printing the parts at an angle of XYZ 90, 45, 45. I think 0.2 layer height would work fine as well. Using the auto-orient feature…
This “Fat Man” variant expands on Rames original design by extending the back to provide a place to house the wiring for the IR LEDs as well as some small thru-holes to route those wires through to drive the LEDs, which can be press-fit…
This is a simple enclosure I created for the Seeed Studio XIAO nRF52840 Sense with a hole for a male USB-C connector. Even though it was designed for the XIAO nRF52840 Sense, it should also work with the standard BLE version as their…
Seeed Studio XIAO ESP32C3 2.4GHz Rod Antenna for XIAO ESP32C3
a minimal and a bigger one for cabeling
This is a simple case for the XIAO ESP32-S3 that solves the issue of the reset and boot button access. I found it was difficult to try, and reset is device, so the case solves that issue. Both LED lights are visible through the openings…
This is a very tight fitting case with very little tolerance. Minor trimming with a xacto knife might be necessary, especially around the “rim” on the back when snapping it into the front. The 100mAh battery does not take all the space,…
This tiny housing for the seed studio xiao esp32 s3 sense is TINY! I didn't find a mounting option I liked, so I made my own. Features: Magnetic base: Use a 14mm round magnet to attach the foot anywhere on your printer SD card is easily…
Seeed Studio XIAO ESP32S3 Plus, powered by ESP32-S3's 240MHz Xtensa 32-bit LX7 dual-core processor, brings more SMD pins to the tiny versatile XIAO ESP32S3. While maintaining all the powerful features including WiFi and BLE 5.0 wireless…
Case for Seeed's Grove RGB 16x2 LCD Display. I used M2 x 14mm screws but #2 x 1/2" thread forming screws would probably be better. Update 2019-03-10: Added a new version that is designed to be mounted on a flat surface (3/4" MDF board in…
Make sure that after printing the holes in the joystick and back button are cleaned up so they sit properly. https://youtu.be/DMV8aHCts8Q
Mount is: https://www.printables.com/model/1257062-quest-3-project-babble-mount
This is a protective case for the Seeed SenseCAP T1000-E which lets it attach to Magsafe compatible phones. It is only 9.5mm thick and gives access to the button and the charging port on the back. There is also a slot cut out for a…
Uses these terminals from Amazon for the 18650 sled. For the spring terminal, i trimmed the tab slightly, and it slides in at a 90 degree angle to route the wire up the side of the sled, and through the hole in the top. (pictures…
I'm printing these in PETG with 15% infill. But really all settings are at your discretion as long as the durability will suit your own purposes. I recommend ‘molle V2,’ especially for straps as the cuts are center on the molle clips…
Seeed Studio XIAO nRF52840 by Nordic carries wireless capability for the first time and it supports Bluetooth 5.0, also able to operate with low power consumption. It will be your best microcontroller for Bluetooth applications.…
Optionally you can push through a 5-6mm of 3mm plastic side glow fiber optic cable (or print a small 3mm cylinder out of translucent/clear PLA) and push it through from the outside, flush with the case. This makes the LED visible from all…
Commercial Use and Attribution Notice MeshPack © 2025 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted under…
Seeed Studio XIAO nRF52840 powered by by Nordic Semiconductor's nRF52840 chipset, is carrying wireless capability for the first time and it supports Bluetooth 5.0, also able to operate with low power consumption. It will be your best…
Description This is a scale model of the Seeed Studio XIAO RP2040, a board powered by the Raspberry Pi RP2040 chip with various useful functionality and costs $5.40. The product page for this device can be found here . It is intended for…
Minimalist enclosure for the Seeed Xiao ESP32C3 with the mmWave sensor. If you want to replicate the electronics just foloow the below links with the instructions. To secure the mmWave sensor to the enclosure i just used two M1.6x4…
This is the enclosure for the LED Driver Board for Seeed Studio XIAO (we included a hole for external antenna for WLED applications). This LED driver board is a compact yet powerful solution supporting both 5V and 12V LED strips,…
Modified to fit a larger 160 deg FOV camera, new mounts with proper tolerance to fit an m5 bolt. (Commonly used for GoPro.) Included an extension arm I made for this and a universal mount designed to fit the Index.
This is a high-performance LoRa module specifically designed for the XIAO series development boards. Based on the Semtech SX1262 chip, it supports global LoRa bands (862-930MHz). Combined with the powerful computing capabilities of the…
Modified the great case designed by zeropt to fit a 3000mAh Makerfocus battery (65x35x10mm). A M3x14mm screw is needed. I had no Onshape experience and I needed some time to figure it out and to appreciate the great design of zeropt.
ESP32C6 .step .f3z
I needed a simple case for bluetooth proxies. As I have poor signals, I wanted to place the antenna as far from the noisy/interfering electronics as possible. I do not need any of the pins, so they are not exposed. The case is snap-fit,…
A very simple version of the XIAO ESP32C3 with only its essential features for printing and testing fit in projects or designing cases. Its a 1 to 1 representation of all the sizes of the original model.
Upgraded SEEED Wio Tracker L1 E-ink made space for the maker focus 3000mah battery, and case made more compact, upgraded buttons, added a hook to the top, added supports to hold the screen. just a basic case note: its a different size…
I just started playing with Meshtastic radios. I ordered a bunch of different ones. So far I like these the best: Seeed Studio T1000 ( https://amzn.to/3EzfasS ) Lilygo T-Echo ( https://amzn.to/4hq5UpG ) RAKWireless Wismesh Pocket (…
Special Thanks to KB5UTY-Dave for the pics! Commercial Use and Attribution Notice: ACOS Xiao Beacon © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use,…
This is the 3D-printed enclsoure with a versatile retractable stand for the XIAO 7.5‘’ ePaper Panel, which is a energy-efficient smart home companion designed to seamlessly integrate with Home Assistant. Ideal for showcasing real-time…
A lightweight holder for Seeed XIAO ESP32C3 and ESP32S3 development boards, incorporating a space for the external flexible PCV aerial to sit. There are three designs: A compact holder which places the aerial under the board A holder with…
Case for the SeeedStudio XIAO ESP32 C3 and the 24Ghz mmwave Human Static presence sensor for XIAO (based on LD2410) Has room for the Antenna that comes with XIAO C3. Snap-fit lid. 0.2mm tolerance in the model. Sensor used:…
⚠ DISCLAIMER. I technically don't have permissions to post this, but I also had no way to contact to OP to ask permission to remix it since they Use MakerWorld and has a "Lv7 comment disturbance block" set making it nigh impossible for…
Seeed Studio XIAO nRF52840 Plus, powered by Nordic chipset with FPU, brings more SMD pins to our popular Bluetooth-enabled board. While maintaining all the capabilities of the standard version including Bluetooth 5.0, NFC, and low power…
This case has modular battery inserts to allow the use of 18350, 18650, and 21700 batteries. The USB port of the Xiao is accessible, and there are two frames. One with just a power switch to wire inline with the battery, and another which…
use m3 heat set insert (5mm OD, 3mm length) and 6mm m3 bolt OR just use zip ties in the corners 🤷
I havce modified the Rames The Generic XIAO Sense Case (Seeed Studio XIAO ESP32S3 Sense, Camera) mount to be compatable with Michal Fanta 's Articulated arm.
Back has tabs that snap into holes in the front after inserting Mic Array, no screws or glue needed. The case sits in the optional base. If you have right angle cables, you can sit it in the base with the connectors pointing straight down…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 I wanted a little case for one of my XAIO boards and a variety of mounting options as I have a few sitting about so I can use them in different ways. Later I realised I could modify it to fit the other XAIO models. If you…
This case fits the Seeed Studio Round Display + Seeed Xiao ESP32. There is a cutout to glue the Wifi antenna. It requires to use a small angled USB-C adapter ( Aliexpress or Amazon ). The screen is secured with a screwable ring. The case…
I wanted a case that used standard 18650 batteries for my Xiao NRF kits that also had a power switch. You'll need some switches like these (2MM): https://www.aliexpress.com/item/1005005531658132.html Battery terminals like these:…
A mock-up of a Seeeduino Xiao microcontroller breakout board for design prototyping.
This model is a fit for the Seeed Studio 13.3" Spectra 6 E‑Ink screen with a Seeed Studio XIAO ePaper DIY Kit EE02 controller and a 2500 mAh LiPo battery . It allows the screen to fit nicely in an IKEA Lomviken 30×40 cm frame without…
Housing for the Seeed Studio XIAO Expansion Board I’m trying to create a datalogger with integrated zigbee switch by using a esp32-c6 chip. During research, I found the seeed xiao esp32-c6 module which allows zigbee communication. It also…
Seeed XIAO Case with Battery Compartment This 3D-printed case is designed specifically for the Seeed XIAO board with Battery Extension . It protects the electronics and provides a secure spot for the battery. LiPo Battery 3.7V, minimum…
I can't explain how satisfying this is to use. The magnetic pogo pins will suck the card from your hand as it seats into the dock. If your card is turned off, it will wake and begin charging as soon as it sees USB power. If you have…
Grove Shield for Seeed Studio XIAO is a plug-and-play Grove extension board for Seeed Studio XIAO series. With the on-board battery management chip and battery bonding pad, you could easily power your Seeed Studio XIAO with lithium…
This is a scale model of the Seeed Studio XIAO SAMD21, a ATSAMD21G18A-MU board with various useful functionality and costs $5.40. The product page for this device can be found here . It is intended for makers building electronics to…
Created this model as I was not happy with the other designs I saw online and here. Fits the Seeed Studio XIAO nRF52840. To be used as a dongle for a keyboard I am building. Comes with a hole for reset. Might add a hole for lights but for…
Seeed Studio XIAO SAMD21 powered by Microchip SAMD21G18 chip is an ultra-small, high-performance universal development board, the pioneering product of the XIAO series. It supports Arduino / Micropython / CircuitPython development, which…
I use this clip: https://amzn.to/49yIZ8n But you can also just search for UV-K5 clip on ali or other sites. I printed it vertically to give it the strongest layer lines for both the clip and the tracker. So be sure to use a brim or raft…
Dew Point Ventilation This is a case for another approach of dew point ventilation. Dew point ventilation means that you measure the temperature and humidity inside and outside. To decide whether ventilation is useful or not, you…
The simple ESP32-S3 SENSE Stand. The "adapter" is very tightly dimensioned. One M3 screw is required to mount both parts together. Created with SolveSpace
Expansion Board for Seeed Studio XIAO is a powerful functional expansion board for Seeed Studio XIAO series of only half Raspberry Pi 4 size. It enables building prototypes and projects in an easy and quick way. With its rich peripherals,…
WARNING The webcam application gets the board too hot for PLA even with the heat sink. You'll need to use PETG which has been fine for me so far in limited testing. Summary Small case for the Seeed Studio XIAO ESP32S3 Sense with a…
Hold your Seeed Studio XIAO ESP32C3 in place while you solder on the pins.
Just a simple base for the Seeeduino Xiao expansion Board holes are designed for 4x M3x6mm screws that tap into the plastic
The original case is a great design, but unfortunately didn't fit my my Seeed Studio NVMe-hat because that PCB is slightly longer. This remix makes it fit by removing and manipulating the cutouts of the original model. This also means…
This is a 3D-printed case designed for the Seeed Xiao series, built to be worn as a wristband – ideal for projects such as step counting with the built-in gyro , or other DIY tracking and wearable applications. The case is optimized for…
Just reupload separate models
Helloo! Here’s my second case for Meshtastic ! This time it’s designed for the ESP32 with the SX1262 from Seeed XIAO , using soldered pins. To reset the device, just insert a Bic ink tube through the hole to press the reset button. Extras…
This is a case designed for the ESP32-S3 by Seeed Studio. Uses pressure tabs for a secure lid fit. It's small, with cutouts for running the antenna or cables to the GPIO pins and/or solder points on the bottom of the board (including LiPo…
Intention The mount is thought be adapted in other project and less for standalone use. Tested with XIAO-RP2040. If other XIAO MCUs have problems let me know :) Features and limitations The micro-controller can easily clip in, keeping…
All of the purely 3D printed options for frames for the Seeed Studio TRMNL kit were, in my opinion, ugly and/or hard to print. After trying a couple of those, being dissatisfied with them, and with aesthetics in mind, which is really half…
The XIAO RP2350 packs the power of the Raspberry Pi RP2350 (switchable architecture of dual Arm Cortex-M33 cores running at 150MHz with FPU, and dual open-hardware Hazard3 RISC‑V cores, enhanced security and encryption) into the classic…
V2 now available! I've updated the model with a cutout at the top to allow the T1000's strap or lanyard to pass through — a common issue with the original design. V2 also features smoother, more refined edges and additional rounding work…