7,484 models
Use normal supports on build plate only. A compact twisty sensory fidget sphere with a spiky textured surface. The sphere is built from rotating segments that can slide and twist along the central axis, creating a satisfying mechanical…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
Reverse bowden IR Sensor Cover for the MK3s I have included 3 versions one for the PC4-M10 pass through connector and another for the PC4-M6 connector. I have now added a version for the PC4-M5 connector. Edit 19/2/19: I have added a M5…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Used to detach the filament sensor from the original spool holder. You might want to do this when building a custom enclosure for your printer or when using a different spool holder. Features: Easy print without support structures Firm…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
A spiky sensory fidget sphere designed for tactile stimulation and stress relief. With a diameter of 80 mm, the surface is covered with evenly distributed spikes that create a pleasant massage-like sensation during use. The model prints…
Print approx. €4.38–€5.35 excl. taxPreliminary estimate for one variant
I created this simple and (almost) fully printed anemometer for students in local high-school programming classes. 3D printed parts (PETG): Top dome Top core (this is where a small magnet is placed) Bottom body (this part contains a Hall…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
Sun Shield enclosure that transforms your indoor aqara temperature, humidity and air pressure sensor into an outdoor wireless weather station. The combination of sun shield dishes and internal cavity ensures some degree of air ventilation…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
Use normal supports on build plate only. A compact twisty sensory fidget sphere with a rounded textured surface. The sphere is built from rotating segments that can slide and twist along the central axis, creating smooth and satisfying…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
This is a mashup of the following two models to be able to mount a D1 mini v3.0 together with a reed sensor onto a BK-G4 gas meter: https://www.printables.com/model/111029-d1-mini-v3-snapcase-low-profile…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
Remixed https://www.prusaprinters.org/prints/24951-prusa-mini-filament-sensor-holder to accept M3 hex nuts and made a slightly longer arm. Base is the same.
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
Greetings all! This is a set of sensory/noise reduction earplugs for individuals who are looking for a little bit of noise reduction for everyday activities, like going to the movies, being in a loud restaurant, and much more. These are a…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
I designed a clip to hold the G Sensor cable for the Ender 3 V3 SE printer, as I didn't like it hanging loose. I found another clip that attaches it to the top frame, but it wasn't functional for me because it stretched the cable too much…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
Stick or screw the Hue Motion Sensor in a corner of the room. The sensor points up or down at a 45-degree angle. Printing information Layer height: 0.30 Infill: 20% Support: none I am looking forward to your Makes! :-) If you like this…
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
EN: This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design , but is a new development except for the rear ball joint . The radar…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for PETGSource material: PET
The cubes measure 4×4×4 cm. There are 2 pictures on each cube that you can use to stamp into modeling clay or kinetic sand. Inside there are molds for different objects. The cube develops fine motor skills, vocabulary (create stories),…
Print approx. €6.51–€7.96 excl. taxPreliminary estimate for one variant
A simple holder for Tuya tempeature / humidity sensors. It is designed to be hanged with one screw (see pictures). The sensor fits easily in the holder and is hold by gravity. Print in PLA or PETG.
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
The 3D printed mount is designed to perfectly fit the Sonoff SNZB-03 Zigbee motion sensor, ensuring a snug and secure fit. Whether you prefer a more permanent installation with screws or a flexible and removable option with magnets, this…
Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant
This is implementation of Bondtech feeder with Prusa internal filament sensor (IFS). You need extend some holes with roamer 3 mm and thread M3, M2 (for filament sensor) and M6 for fittings. Older version without filament sensor
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Holder for temperature sensor from Aqara. The sensor just slide in the holder and can be placed on shelf or furniture. Print settings: PLA Layer height: 0.10mm
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for one variant
This is a magnetic holder for temperature sensors. You'll need a 8x4 or 8x3 mm magnet. There are three versions of the holder. The smallest one should work with sensors of ~4 mm in diameter, the middle one fits sensors of around 4.9 - 5…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Just a simple DS18B20 Temperature Sensor mount. I printed it with PLA but if you need it in a place that gets hot you better use something that can withstand the temperature. Slide the sensor in from the top or the bottom. It has a tight…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Just a quick and dirty solution for the wall mounted drybox https://www.prusaprinters.org/prints/4605-wall-mounted-drybox-with-sensor
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
I've had my Wahoo Cadence sensor for a couple of years, the clip plastic became brittle and cracked when I took the sensor out. I made this replacement, because you cannot buy one.
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
I had limited side room but sufficient vertical room for my 5 head Prusa XL, so I wanted to mount the spools above the printer, however the placement of the side filament sensors made this an awkward arrangement. I made the bracket that…
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for one variant
Update 8/7/2022: Changed and reupload STL file of Prusa_Mini_Extruder_Rear_cover. Will try to update rest of the files (STEP, F3D) when I will have time. This remix of the Prusa mini extruder rear part with integrated filament sensor. You…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for PETGSource material: PET
The stamp cubes measure 4×4×4 cm. There are 6 pictures on each cube that you can use to stamp into modeling clay or kinetic sand. The cube develops fine motor skills, vocabulary (create stories), and imagination. The cubes have the…
Print approx. €4.60–€5.62 excl. taxPreliminary estimate for one variant
Remix of Alex Ward's MK3S+'s reverse bowden cover. I did not realize at first that the center post was not the same diameter as PTFE tubing, and was preventing me from threading my PC4-M10 fitting. I removed the center post similar to…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
This mount is used for mounting JSN-SR04T water level ultrasonic sensor on top of the IBC lid.
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
Here I have created a small angled mount for Philips Hue motion sensors. The mount is meant to be used together with the original mount. It should be possible to fix it with a screw or some kind of glue. For my picture I used an adhesive…
Print approx. €0.54–€0.65 excl. taxPreliminary estimate for one variant
This is a holder for an IR Detector / Ein Halter für einen RBS10072 IR Infrarot Sensor Hindernierkennung Abstandssensor
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
This is a remix of the holder for an inductive sensor on a Pipersberg G4 RF1 c . It is used for an 18mm sensor with which I got more stable readings. It also comes with a thicker bolt that fits more tightly in the little cavity. I have…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
🇬🇧 IKEA Tradfri Motion Sensor Corner Mount A holder to mount an IKEA Tradfri motion sensor in a corner. The sensor is simply plugged onto the holder. The holder can be glued into the corner, but also has a hole for a countersunk screw. 🇩🇪…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
CZ: (EN version follows) Na mém Prusa Mini mě rozčiloval původní senzor filamentu, který se “ginglá” někde na konci bowdenu. Našel jsem řadu existujících řešení, mimo jiné: Držák:…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for PETGSource material: PET
A sensor cover for the Adafruit Stemma Soil Sensor: https://www.adafruit.com/product/4026 Snaps Together nicely no glue needed. I print in PETg for outdoor durability. Logo on top (for those of you wondering) is for Team 4160 for which I…
Print approx. €1.00–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
Model update: 30.1.2025 Description update: 10.11.2025 Assembly Notes — Steps That Differ from the Original Procedure Cut the PTFE tube to 27 mm , keeping the original chamfered outer edge . On the freshly cut side, create a small inner…
Print approx. €4.73–€5.78 excl. taxPreliminary estimate for PETGSource material: PET
Toy. Sensory tray for kids. Additionally, I have included the .bgcode file with my two-color print setup, with manual color change, as seen in the photos.
Print approx. €6.77–€8.27 excl. taxPreliminary estimate for one variant
Simple Case for ESP32 Wroom with SHT31 Sensor with honeycom Lid No Glue and no Screws needed Just plug it together, you just need to solder the ESP32 and SHT31 To put it on the Wall you need only double-sided tape. The Sensor should be on…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
Kabel: Aliexpress / Amazon Buchsen: Aliexpress / Amazon Version mit nur einem Anschluss Du suchst einen Anschluss/Schaltplan für die Volksfräse? Auf meinem Blog findest du einen Anschlussplan für die Volksfräse VF1 und dem Tillboard.
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for PETGSource material: PET
With the default MK3S filament sensor cover, each time the filament runs out and I unload it, it stucks inside the extruder motor because of the end bend. I then have to open the idler cover and remove it with pliers. Yes the solution is…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
A simple case for a complete motion sensor setup using a Wemos D1 Mini ESP32, AM312 PIR sensor and a simple light-dependent resistor. Hardware list: Wemos d1 mini esp32 (or equivalent) AM312 PIR Light-dependent resistor Note: Supports…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
an open robotics platform ( https://openroboticplatform.com/ ) compatible holder for the HC-SR04 ultrasonic sensor. attaches with 2 M3 flatheaded screws (height of the head of the screw should be around 2mm). sensor is easy to mount,…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
This improved file has an integrated thread for a standard PC4-M10 PTFE tube push connector. This allows for you to print your own threaded part for the best push connector option rather than having to break out the soldering iron for a…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
Soil moisture sensor case for the sensor in the images. The case will require to m2/m2.5 screws to fix the board. The top case will fit snug, you will need to gently press it in 2-3 times. You can find the Tinkercad model here Print…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
This part fits on water meters with two screw pillars on the glass. One side has a slotted hole so the offset of the induction sensor to the pointer can be adjusted. For my water meter (Kiwa sensus) the center to center distance of the…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
Created using Fusion 360
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
I needed an outdoor door sensor for my home automations, but I could not find any decent weatherproof sensors. IKEA Parasolls are cheap, working on AAA batteries (even rechargeable ones). So I tried to make some cover. Project file…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET
Movable z axis belt tensioner added bracket for filament sensor for Ender 3 V3 KE original screws can be used - cannot be used together with the original spool holder!!! Required parts: 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings 2 parts -…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
the force required to insert filaments through the sidemounted filament sensor didnt agree with me so i reduced the spring compression by 1mm. reducing it more will become problematic for the center filament. integrated filament numbers…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET
This is a two-part case. The lid holds the Wemos Mini D1 in a slot that leaves the pins available. The bottom has holes so that it can be used with an environmental sensor such as the BMP180 temperature/pressure/humidity sensor pack.…
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant
A small holder for Aqara Motion Sensors. It has a hole for M5 screws. You can also use doublesided-tape to mount it.
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
I recommend using GCODE or 3MF as I used different infills for different parts. If it will not work 100%, simply use rasper… Remix : https://www.thingiverse.com/thing:4385429/
Print approx. €3.03–€3.70 excl. taxPreliminary estimate for one variant
Toy. Sensory tray for kids. This model is capable of being printed with the rainbow color combination or any other color combination you like. I am including the .3mf file, configured with manual color change. The first and last layers…
Print approx. €6.05–€7.39 excl. taxPreliminary estimate for one variant
The cubes measure 4×4×4 cm. There are 2 pictures on each cube that you can use to stamp into modeling clay or kinetic sand. Inside there are molds for different objects. The cube develops fine motor skills, vocabulary (create stories),…
Print approx. €10.59–€12.95 excl. taxPreliminary estimate for one variant
I needed a simple touch sensor case. I probably over-engineered it a bit, but I really wanted most of the “touchable” surfaces to be printed on the bed so they had a nice finish to them. I also knew that I would be using Dupont connectors…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
Toy. Sensory tray for kids.
Print approx. €5.95–€7.27 excl. taxPreliminary estimate for one variant
The files are made for a MMU3 (here with MK4) Whereas the Chars (I|O, + and -) are changeable Also the used Extruder, here Main (Display 1) = 3, I|O, + and - = 1 Bracket X for place for two additional mosfet (fan and Led strip) There is…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
I have modified the HEX Scraper to accommodate a standard temperature and humidity sensor. With this scraper you can know the temperature and humidity outside or inside the car. It is a standard temperature and humidity sensor that can be…
Print approx. €4.32–€5.27 excl. taxPreliminary estimate for PETGSource material: PET
Resizing of the Ball may be Needed to ensure clearence. The Example gcode resizes the ball to 7.3mm diameter and splits it in to two halves. There is a Square Connector, no glue needed. The Example Gcode disables Elephant foot…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
The case includes the Sensirion SCD30 CO2 sensor and an AZ-Delivery NodeMCU V3 board. In the attached FreeCAD file, custom adjustments can be made in the spreadsheet. Wiring details can be found in the images. Programming is done using…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET
About: The Festo fitting is screwed into a threaded insert. This model uses M5 inserts from Ruthex (other inserts are also possible). The core hole diameter is 6.4mm and the depth of the hole is 9.5 mm. If you need a different core hole,…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
This is a cradle-type holder for a Ruuvi tag sensor . It's a light duty holder for places where you wish to mount the sensor on its side or upside down, etc. Anywhere the sensor should be affixed (but you don't want to tape or glue the…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
I enlarged the filament input hole and added threads to accept a PC4-M6 connector. This makes it easier to run a PTFE tube to a filament enclosure or filament located a distance away from the printer. Print with standard Prusa recommended…
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
Xiaomi Temperature and Humidity Sensor Holder by RSCtech You can use screw or glue to fix it. It keeps the sensor stable thanks to its design, even upside down. It can be easily removed when replacing the sensor battery.
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
To protect the robot from damage caused by sharp furniture legs, I designed a protective ring. The ring is sturdy enough to shield the top and slim enough not to interfere with either the laser sensors or the bump sensors. The rear tabs…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
A weatherproof (probably - use at your own risk) enclosure for the Third Reality zigbee contact sensor. I made this so I can mount it onto an outside gate. This is the sensor in question. EDIT: Added another version of the magnet holder…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for PETGSource material: PET
Mit diesem Druck kann ein Magnetsensor optisch ansprechend an einem Pipersberg G4 Gaszähler befestigt werden. Der Druck enthält eine Mulde im Boden, die mittig über der zweiten Nachkommastelle angeordnet ist. Um den Zähler auszulesen muss…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
What This is an angled mount for the Philips Hue Interior motion sensor. It includes an screw base which can be turned to the right angle and fixed to the wall. The Sensor mount is connected with its original magnet mount which screws…
Print approx. €5.25–€6.42 excl. taxPreliminary estimate for one variant
Can be used with most of the rectangular temperature & humidity sensors you can find on Amazon or AliExpress. The Prusa Temperature Sensor also fits well. Hole dimensions : Front : 48.20 mm x 29.20 mm Rear : 45.80 mm x 26.80 mm BOM : 2 x…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
Add supports, printed with Esun PLA
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Parts for a pan-tile mechanism using standard-sized servo motors. I adapted this to work with a ham radio satellite antenna to track satellites as they cross my sky. Please leave feedback if you print and use this. Would love any…
Print approx. €4.50–€5.50 excl. taxPreliminary estimate for PETGSource material: PET
Bracket Used to Center the Filament runout sensor of the Ender 3 S1 lineup . Features 2 holes for extra Secure mounting using the 2 extra screws provided with the printer. Also has 2 holes to secure loose bits of filament.
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
Attach a SwitchBot Contact Sensor to your Garage door with the use of these 2 brackets.
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
A snap-on case for a NodeMCU v3 that has slots for USB charging and sensor wires. Designed to fit DuPont connectors attached to the NodeMCU's pins. This was my first basic case for my DIY Home Assistant setup. I use it hold SHT3x-D…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
I wanted to remotely measure temperature and humidity inside Creality Space Pi dryer. Also the built-in humidity dryer is not behaving reliable, as it won't go below 15 % R.H. So I used spare SNZB-02 thermometer for this, because it (so…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
simple stand for water leak sensor - Smart Home You can support me with Bitcoin or Lightning network HERE or normal payment HERE .
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Analog displacement sensor, measure under 10 microns for under $10! Measurement range of between 0.5mm and 1.0mm (depending on how careful ya are during the build) and a repeatability of around +/- 5 microns. I made it for an application…
Print approx. €6.77–€8.27 excl. taxPreliminary estimate for PETGSource material: PET
I printed it with PETG 0,4 Nozzle, 20% infill without supports. (Prusa MK4S)The hygrometer https://is.gd/P63yjH. is cheap and reliably.
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for PETGSource material: PET
Toy. Sensory tray for kids.
Print approx. €5.86–€7.16 excl. taxPreliminary estimate for one variant
A dimpled sensory fidget roller designed for tactile play and light massage. With a height of 110 mm and a diameter of approximately 32 mm, it fits comfortably in the hand and provides a satisfying textured surface. The patterned exterior…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
This is a mounting bracket that holds a JSN-SR04T ultrasonic sensor and waterproof DS18B20 temperature sensor for mounting to a 1" square tube. This is part of a project to measure the water level of a creek. The sensor will be extended…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
This is a variation of https://www.printables.com/model/1202146-wall-mountable-housing-for-dht-22-sensor for smaller sensors without own housing. See attached pictures for assembling. Please remember to insert the cable into the housing…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Park sensor holder to front outside bumper for Renault Scenic III Ph1 And cut mark tool, for cutting hole. Original holder is ASA, recomend use ASA to printig Use ziptie to secure fix in bumper in ziptie holes
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
CORNER BRACKET for fixing a SilverCrest lidl MOTION DETECTOR. SilverCrest Motion Sensor Model SMSZ 1 B2 manufactured by Lidl. I looked for a simple solution is effective, This radar has an aperture of 120 deg, for a height of 2.30m the…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for one variant
A slightly over engineered mount for a TuYa TS0203 Zigbee door sensor - optimized to be mounted with screws (in my case, outdoors, on my fence gates). The top snaps onto the body, but is ultimately designed to work with screws. BOM A TuYa…
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for PETGSource material: PET
Dieser hochwertig 3D-gedruckte Sensorhalter wurde speziell für den HC-SR04 Ultraschallsensor entwickelt und sorgt für eine sichere, stabile und passgenaue Befestigung in deinen DIY- und Elektronikprojekten. Ideal geeignet für den Einsatz…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
I am not sure if the ADXL345 sensor requires proper orientation to calibrate properly. The original orientation had the X axis pointing down the Y-axis. This now has the Y-Axis pointing down the Y-Axis.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Holder for round temperature/humidity sensor, suitable for mounting in AL profile 3030 (Prusa Mini). The holder has prepared guide rails for the grooves of the AL profile 3030, the hole in the holders is prepared for an M5 screw (it is…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
Build an ambient sound sensor. This small box fits a microcontroller and the sensor, is powered from USB-C and looks neat on the wall. My use-case: the sensor measures ambient sound levels in the room, and reports those to HomeAssistant.…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Es wird noch im Mai eine neue Version des Filament Umspulers geben. In dieser VErsion ist der Motor und die Sensoren integriert. Das ganze wird sehr viel kompakter sein. https://www.wendelgass.com/3d-druckwerkstatt Diese Anleitung ist…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
Corner and flat mounts for Aqara sensors - The corners are overly large as to cover / match the anchors of existing sensor mounts I had. Print instructions Prints without supports. Each type requires a sensor 'cup' to be printed with it,…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
A holder for D-Z73 reed switch to attach non-invasively to an Actaris gas meter. The meter has two small raised posts which allows the mount to be press-fit into place. The reed switch is attached to an Aqara Zigbee magnetic door/window…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Case for Laskakit sensors.
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET
FR : Voici une cale qui permet de monter un capteur de frein magnétique fournis par bafang avec le bbshd (pour freins hydraulique) Tektro AURIGA comp qui était monter sur un vélo Btwin rockrider 520 de 2013/2014. Je l'ai dessiné car les…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
About the print This print is part of a larger project I am working on to implement Mycodo into my hydroponic garden. The goal is to have several modules that can connect independently, with ‘break out boxes ’ for different sensors,…
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for PETGSource material: PET
A small housing for DHT-22 sensors. Printed with PETG and 0.2mm layer in one piece. Needs no supports. Just put the top plate of the sensor into the small pocket inside the housing (may need some fiddling) and fix it all with a cable tie.…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for PETGSource material: PET
Bracket for attaching the Aqara motion sensor to the wall or to the included hook that fits on (my) stairwell. There is a recess in the hook for inserting a magnet.
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Mount for the Zircon StudSensor L50 compatible with IKEA Skadis pegboards. Would like to do a v2 with rounded lower corners, but this is functional.
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
Use sensorless homing in your own projects! In this project and associate video I’ll show you how to set up sensorless homing using a TMC2209 stepper driver — no mechanical limit switches required! Perfect for 3D printers, CNC machines,…
Print approx. €3.25–€3.98 excl. taxPreliminary estimate for one variant
Safety disclaimer: Use only materials certified for food contact Wash all prints by warm soapy water before use Keep children under 3 years of age under supervision while playing with prints Models were sized to avoid choking hazard (ISO…
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant
Use - D1 mini esp board - BH1750 light sensor
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for PETGSource material: PET
[CZ] Krytka pro prostorový snímač teploty do rámečků Schneider UNICA. Krytka se vkládá pod barevnou vložku v rámečku tak aby byly otvory vertikálně orientovány, čímž se zajistí proudění vzduchu okolo snímače. [EN] Cover for room…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
