770 models
Microserver Gen8 SSD stacker The optional 7MM stacker so that you can stack two SSD's on top of each other. For use with Microserver Gen8 SSD bracket for four SSD's. Has text “7mm drives” printed onto the print. Made with Rhinoceros 3D…
Microserver Gen8 SSD stacker The accompanying 9.5MM stacker so that you can stack two SSD's on top of each other. For use with Microserver Gen8 SSD bracket for four SSD's. Has text “9.5mm drives” printed onto the print. Made with…
This 1x2 Gridfinity module holds a stack of 40 6x2mm magnets inside. Roll the thumbwheel and one magnet at a time is delivered to the top tray, always in the same polarity. You can operate the magnet server with one hand. There are…
This device serves up 6x2mm magnets for use with Gridfinity baseplates and modules. They are always served up in the same orientation so their polarity is always the same. This helps avoid gluing magnets in the wrong orientation. The…
19" 2U DAP Bracket for TimeMachine NTP servers
This TSlot adapter allows you to build server racks with 20x20 Aluminum extrusions. Print the Adapter, add three M3 D4/H5 Heated inserts, slide into the existing rails on the extrusion. The Adapter complies with a 1U server rack spacing.…
Apologies for the absolutely awful photo of the print, the lighting is terrible by the rack. Allows a 9-port Trendnet TEG-S5091 switch to fit in a 19in server rack. Likely fits other network switches, but beware that some of the Trendnet…
Documentation & Assembly Guide - Please Read! I've moved much of the documentation here. Many of your questions are answered here (or will be answered) as I fill it out. READ DOCUMENTATION HERE Status updates April 22, 2025 Rendered STL's…
This is printed 10 inch server rack designed for printer with plate 250 mm x 200 mm (Prusa MK3), but some parts (rails) need the bigger one (Prusa XL). Rack has standard sizes, see https://en.wikipedia.org/wiki/19-inch_rack Rails can be…
Update April 10th, 2026: FreeCAD 1.1.0 broke the model in several places. I believe I have fixed everything and have reuploaded as "generic__mount_v110.fcstd". Let me know if the model doesn't work for you! Update Sept 6th, 2025: I have…
Update 3/10/25: Added 2 new components, the side rail with integrated handle, and the side rail stacking connector. These allow for more customization as well the ability to add more rail sections. See details below. Update 3/8/25:…
I saw a bunch of 10in server racks when looking to get started with a HomeLab to tinker. Everything was built on an ender 3v2 so some parts have to print solo at an angle to accommodate the bed size. I used overture PLA The Lenovo…
Version 2 is here! Meet the Microlab —a super compact, fully 3D-printable homelab that’s perfect for self-hosted tinkerers who love big ideas but small footprints. At just 5 inches wide and a tiny 160x160mm base, it’s even smaller than a…
10" Server rack 1U panel - Tray Designed 2022.09 thing:6196392 printables:569024 TOC 10" Server rack 1U panel - Tray TOC Summary Description Buy me a coffee? Summary 10" Server rack 1U panel generic trays Description Trays for 10" server…
Intro I've designed this case as a replacement for my current home server. The drive capacity has increased so much the last years, you need a lot less drives to get the same or more capacity. My current home server is already 10 years…
This design is meant to enable one build a low profile server, network or whichever equipment fits in a 10" rack. While idea is to print supporting structures and buy the rack rails to finish the build, it is definitely possible to print…
This HDD / SSD Caddy Is fully funtional. It clicks in perfectly. It also shows the lights of the drive status. Compatibility It works on a HP Proliant DL360 G7 Server (Tested) but should also work on any HP Servers that use the same Caddy…
Dell Poweredge 2.5" caddy for R430, R630, R730, R730XD, and T630. Prints well with PLA, but I do recommend using PETG. Please note the screenshot where support is required. It can be made pretty easy in PrusaSlicer or other slicing…
Do you like my model? Buy me a coffee! 50% of all earnings will be donated to charity. https://buymeacoffee.com/yurymkomarov
There's 2 files with filament changes at either 0.8mm or 1.6mm. This allows for a fast or strong print. For Prusa Mini owners, change the skirt distance from object from the default 2mm to 1mm to ensure no toolpath errors
U2 Rack 19" 30cm depth server case for ATX based systems Can be printed on any printer that have 20cm x 20cm print bed. Small server case for ATX/mATX motherboard and TFX power supply, this case supports only M.2 drives Assembly…
Update 18 Jan 2024 Increased infill to 50% Triangle Server rack screw and cage nut replacement. I designed these to be an easy fit for any 1U or 2U items that fit on a standard 19" server rack. Printed in PTGE, PLA, and ABS. .2mm layer…
Designed for the older generation but ubiquitous Supermicro Caddies. Part # SC93301 or MCP-220-00075-0B HDD Status LED's are functional with additional 2mm fiber-optic cable. I've used THIS by searching "fiber optic 2mm" I have a pair of…
UPDATES: 20250123 - Added RPi3B Variant but I don't own an rpi3B so check before printing! 20250123 - Added Headrail files since I didn't include them originally Everyone be sure to check out Jeff Geerling's Github and website for more…
Bring new life to second-hand mini PCs with this custom 3D-printed enclosure. This project turns an HP ProDesk 600 G4 Mini (and similar models) into a sleek retro-inspired console — perfect for emulation, streaming, or even as a…
Printed with Ender 3 V2: Faceplate/Strut/Bowtie/Pins: Overture Starry Blue PETG No Supports Brim 25% Gyroid Infill 4 Walls - Outside to Inside - Alternate extra wall 0.2 Layer Height Sled Parts: Overture Black PLA Pro No Supports No Bed…
I wanted to reuse my old ITX motherboard and ATX power supply to create a small NAS with all my old HDDs. I only use it to power it up a few times per year to create a backup from my main server. Just to have some extra backup. It is not…
I remixed this to add a deeper bevel to the screw holes. Pictures show the issue with the original model. I'm probably using the wrong screws but this remix fixes my issue. Sides are glued to the front bezel with epoxy because I didn't…
A 'remix' of the excellent 1U Rackmount Cable Management Rings by boulwarek . I have scaled the 'ring' down in size to accommodate fewer cables and changed the screw hole spacing to fit 'front-to-back' rails in my server rack. holes…
A Small collection of accessories for the Modular 10 Inch Server Rack - Reworked project. These have yet to be printed, so no guaranties that they work. The included models are: 200mm Fan Topper An Alternative topper that's designed to…
1U Blank Panel A simple 3d model of a 1U Blank Panel, used for server racks Useful Links Example Server Rack
A simple solution to keep your cables organized on any standard equipment rack which includes, servers, networking equipment, and studio equipment. The model features 2 holes appropriately spaced for mounting anywhere on your rack. It…
UPDATE: added 2U and 3U panels, designed from scratch. (Not identical to 1U) Bottom layer is very thin, 0.6mm, to keep print times reasonable. 3 Versions: - Hex - Plain - Passthrough (Left and right part) Designed to join together with…
Things were getting a bit hot behind my home-lab rack, so I figured additional cooling was needed. I slammed together the geometry of 3 of @KennyVerhoeve_588554 's blanking plates in order to get the requisite size, made some holes to…
English Description : (Polish below) I was looking for a ready-made design of a small rack cabinet for myself. The problem was the small print area of my Ender 3 V3 SE, since most of the existing designs didn’t take size constraints into…
added some air holes, and changed screw spacing from 76mm to 77mm. Category: Computer
Did you also make the mistake of buying a Rosewill RSV-4412 server case or RSV-SATA-Cage-34 panel-mount case? If so, did you realize Rosewill doesn't sell spare disk caddies? If not, did you notice how flimsy the sleds are, and how…
Cross Brace: There are three STLs for your use: cross brace with cut area; cross brace pre-cut right side; cross brace pre-cut left side. I moved the fan mount location to the corner, rather than the middle. This allowed for the addition…
The CUBE Rack Cube-based network cabinet / racking system with many features: Build using Standard M6 Cage Nuts (no other non-printed parts needed!) Fits standard 10" network and server cabinet equipment Simple to print and build!…
Here are some 19" server rack blank plates sized at 1U, 2U, and 4U that should save you a few dollars over purchasing from Amazon or Monoprice. I printed these in PETG at 0.2 with 20% infill, but do whatever works best for you. You'll…
Because I have a lack of equipment to fully stock my 19" server rack, and that metal cover plates are quite expensive, I decided to print my own. I have made 3 models; 1; A 1U blank cover plate 2; A 1U cover plate with horizontal vent…
This setup is based on my current hardware and probably will not be applicable for your setup. The screws / t-nuts that i used are different type as well as these are the available parts that I have. So I uploaded the step file for you to…
Have built 10 inch rack and to clean up the wires made this plate. Optimized to be printed without any supports and whatever settings you wish. Here is video in case you want more context:
Vishnu is the one of the three principal deities of Hinduism - Brahma the Creator, Vishnu the Preserver and Shiva the destroyer. Vishnu is the god of Preservation, the great maintainer who often appears in various incarnations (avatar) to…
I wanted to mount a hard drive bracket designed for 10 inch racks into my 19 inch rack directly under a Lenovo mini PC. This uses 2 M5x25 bolts and nuts to connect in the middle. Files include Hex and Blank version. Printed with 20%…
designed these to fit in the drive drawers for my HPe Blade center. not perfect but they work. they fit a wide variety of HP servers gen8-10. tried to make a version that was easy to remove, but kept the older model in case they really…
Requirements Each 1U panel needs: M3 nuts - x6 M3 8mm bolts/screws - x6 M5/M6 Server Rack montage element - x4 Each RPI installation needs: M2.5 6mm screws - x2 --- Blank panels:…
odd→ssd bay can use original front pannel
This 1x1 gridfinity module holds a stack of 20 6x2 magnets inside. Roll the thumbwheel and one magnet at a time is delivered to the top tray. You can operate the magnet server with one hand. There are interior compartments, but if you…
Designed to be printed in two colors, this server room sign can be affixed to a door using command strips. I've uploaded the ‘raw’ stl here. I printed this on a BambuLab X1CC and painted the ‘base’ layer white, with the raised areas in…
A simple server rack cable management arm. Contact me for CAD files if needed. Additional items needed - 12x washer M5 19x1.2mm - 6x washer M5 15x1.1mm - 3x screw M5x50mm - 3x spring washer M5 - 3x nut M5 - 2x nut M6 for rack mounting…
A custom handle created using a base of the original topper so should slot-in like the other rails/topper. Updated - Added Indented Version
This is a universal server rack ear fitting 20x20mm, 24x24mm, and 28x28mm bolt patterns. I based this off of the Linksys rack ear but made it a bit more universal since my Cisco Switch required a 28x28mm bolt pattern. I also made the 3…
A vertical stand for Dell R320. Print two of these. Also fits any other 1U rack mountable thingy with a 43mm side profile.
Easily expandable as your rack grows. Fully 3d printable. Only need m3 bolts and nuts (no heat inserts). Use any 6" rack panels with it. Accessories -…
Mini server rack - parts can be printed on a 220x220 build. I used Uhu glue to bond the main body (bottom and top together). 4.2mm x 45mm wood screws were used to attached the bottom part of a 17mm board. M4 screws were used for mounting,…
2U Blank Panel A simple 3D model of a 2U Blank panel used for server racks. Useful Links Example Server Rack
Build your own media server using #RaspberryPi 4 and an external SSD. Stream live TV and movies with Plex using the Chromium web browser. Learn guide https://learn.adafruit.com/pi-ssd-media-server/ Video on YouTube Raspberry Pi 4…
10" Server rack 1U panel - LS1008G TP Link switch Designed 2021-08-08 thing:6195220 printables:568385 TOC 10" Server rack 1U panel - LS1008G TP Link switch TOC Summary Description Buy me a coffee? Summary 10" Server rack 1U panel for…
Based on the idea from Jason Rose's design to add 3x140mm fans to the front of a 24-bay Supermicro. I've redesigned from the ground up to make it more easily printable and cheaper as they paid $180 for one! For this, I've split it into…
The original Horizontal Edge pieces don't fit on Prusa MK4S and similar beds so I've split them into multiple pieces with dovetail slots for connecting them. I suggest laying the connected pieces on a flat surface and using superglue to…
***MODEL IS UNTESTED*** This is a concept in my mind but i do not have a printer capable of printing it. I have shared this on reddit and have been asked for the files so I am going to go a head and post them here. These were designed…
Used a old DVD drive to model this. Hold 8 2.5" by 7mm drives and fit in 1 5.25 drive bay
🛠 Updates: V1.1: Due to the high temperatures in Europe, I redesigned the cooling for the disk caddy. It now uses a 140 mm fan and has more ventilation holes with fewer obstructions for improved airflow and better temperatures.…
A mini home lab server rack, designed for small business that don't require much network hardware. feature: Cable duct management, to hide your ugly cable Acrylic enclosure to keep dust away from your device 120 fan to keep good airflow…
Wall mounts and connectors for 120mm fans to connect together and make a wall of 360mm fans to help the Rosewill RSV-R4000U case have the adequate airflow it needs. Wall mounts just screw into the side of the case using a couple of the…
I needed a wider gap that didn't have the angular bends to accommodate several power cords in my rack that are rather beefy and don't like to bend. In the photos, the new design is yellow, and I show it next to the original (in purple).…
1U 12x Keystone ports with or without shelf to match the Modular 10" inch server rack project I recommend printing the test piece first to ensure your keystone modules fit well, as this was designed to fit a CCS brand module.
Decided to quickly whip up some carrying handles for this server rack design. Will also add some rigidity when using the “topper” and “rail connectors”.
This is a 3D printable version of the 44T2216 hard drive caddy for IBM/Lenovo xSeries servers. It can hold a 2.5-inch SAS/SATA/SSD drive and fit into the server’s hot swap bay. It has four screw holes for securing the drive and a handle…
This is meant to support a 1U or possibly even a 2U server. I've designed it to use M6 nuts and bolts and you can use 2 or 3 bolts per support. In total you'll need 4 of these (2 of which are mirrored) to support the server from all 4…
The width is non standard. Its deigned to fit on a 220x220 build plate. I used glue to assemble the top and main case. The top has room for mounting a 120mm fan The inside of the DOORV2 has a small hole where a 8mm magnet can be mounted.…
Rack server rails - self-supporting - M6 / M4 Thread - Collection - Guide autoportanti per Rack server 1U 15.875x23x44.5mm 2U 15.875x23x89mm 3U 15.875x23x133.5mm 4U 15.875x23x178mm 5U 15.875x23x222.5mm Suitable for 10" or 19" Easy to…
Version v1.1: changes of the wall thickness Holder would be putted directly on the screws of the Heatsink. fan Noctua A4x20 would fixed with 4 M3x20 screws One Metallholder in the housing have to be bended
Microlab 2 — Modular 3D-Printable Mini Homelab Microlab 2 is a fully modular, open-source mini-rack system designed for makers, homelab enthusiasts, and anyone who wants a compact, customizable workspace for electronics or servers. Unlike…
I apologize for the screenshot! This was made at the request of someone else and it doesn't fit on my printer, so I am not able to provide a build. Please someone post a make so I can have a real image to use for this. 2U version of my…
Adapter for mounting SSDs in existing 3.5" server hotswap bays that has some sort of bottom support. Tested on Dell, HP/HPE old-style and HPE “smart” -carriers. Use 3 of the original screws to fasten the adapter Insert the two small pegs…
Description I had a 24" monitor sitting idle and, as it happens, a 42U server rack at home. (Yes, not exactly standard apartment furniture, but here we are.) The idea struck: hang the monitor inside the server rack. This design came to…
The included STLs are 125mm in diameter (edge-to-edge), a material thickness (not overall thickness) of 3mm, and have a plain backside and feature around ~50 more or less popular logos of software, programming languages and hardware one…
100 Downloads! Thank you for the support! 07/07/2026 Update - Fixed the Front/Back Brace so it is now printable with no supports. Now labelled Front Back Brace V2 in 5U folder. Thanks to Anton for bringing it to my attention. 12/08/2026…
Easily install or remove cage nuts for a rack M8 nut and bolt required Probably better to buy a real one if you're doing hundreds of them Not my model! Reupload from Stephen1424 on Thingiverse
Microserver Gen8 SSD bracket for four SSD's I've created this bracket based on thing:1279920 from Oliver Oswald . I initially had above printed in 2017, but the moment i got it i was displeased with it because of how it was designed. It…
I needed to add my Jensen Switch to the rack, so i made a hole in one of the shelfs. Big thanks to McBig work :)
Just bought a few Fujitsu Servers, trying to develop a ssd tray for the 2,5" bays since mine somehow did not get shipped with them, and worst i could not find them online to insert any other ssd drive to them. with Version 5 everything…
This 10 inch server rack plate was designed for building Raspberry Pi5 NAS servers , it securely holds two SSD units , optimizing storage density in a compact 5U by 1U form factor compatible with standard home lab racks. Ideal for RAID 0…
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
An elegant NAS/Server with support for 3.5 inch drive and active cooling with a fan. It works wonder as a backup server, for example for TimeMachine or ZFS replication. If you want to use ZFS remember to use the 64 bit version of…
Server rack cable management ring, with gap for inserting cables. Could be mirrored for opposite side of the server rack, however i do not find it necessary and its easy to do in the slicer My fusion skills are not the best, but the .f3d…
This is a case for BC-250 board-computer, to use it with cheap 12v PSU - from HP server, like HSTNS-PL28 643954-201 (gen6, gen7 - reachable under 10$/10€ in state "like new"/new). It can be 460W, 750W … How to connect this thing to BC250?…
Remixed 1U Rack Heavy Mount Support that has a much larger surface area and is made for M5 Bolts & Cage Nuts/Standard Nuts/Wingnuts. Can be easily modified for M6 bolts or a wide variety of SAE bolts. Harbor Freight sells an M5/6/8…
This is a small rack designed to hold 5 Dell Optiplex MFF servers. Includes long shelves for the front, shorts shelves for the rear, 5 port patch panel and “shelf” for Unifi Flex Mini 5 port switch. I designed this to be a compact “rack”…
Here is my 10" server project to store 2 Raspberrys with Repetier Server with 2x12 Prusas All panels are aligned with the front on the print bed. 1. Fan slot This panel is to keep the distance to the fan. Here 0.4mm is printed black, then…
What is it? Its a fully modular, easy-to-print and FREE 10" mini server rack perfect for homelab projects. All parts fit together with M3 bolts and are standard rack unit (RU) / 10" server sizing to build an infinitely stackable mini…
This is a 1U sized blank panel with hexagonal cutouts to cover unused openings on a 19" (482.6mm) server rack. You'll need to print 2 ends, 1 center, and 4 bowtie connectors for each panel. The bowtie connectors have a 1 degree taper to…
The double 1U design was great, but I needed a 2U. I re-sketched the profile of the double 1U stand, but without the middle divider, and corrected the width to match my APC UPSs. Recommended print settings: 0.2mm layer height 4 walls 4…
Remix of a remix. For use with 10" rack modules. This design is meant to enable one build a low profile server, network or whichever equipment fits in a 10" rack. While idea is to print supporting structures and buy the rack rails to…
Summary This is a rack-mount cage system for the Protectli FW4B mini-PC (a popular OPNsense / pfSense router for home-labbers). It is designed to fit either a standard 19-inch server rack or 10-inch mini-rack and take up 1U of rack-space.…
Designed specifically for use with the NavePoint 22U 2-Post Open Frame Rack with Casters (SKU: 00404145). Other similar models sold by Navepoint may work just as well but I can not verify. Let me know! The holes on the sides looked like…
Designed for the older generation but ubiquitous Supermicro Caddies. Part # SB16105 or MCP-220-00047-0B HDD Status LED's are functional with additional 2mm AND 1mm fiber-optic cable. I've used THIS by searching "fiber optic 2mm" and…
This is 100 mm depth version of printed 10 inch server rack designed for printer with plate 250 mm x 200 mm (Prusa MK3), but some parts (rails) need the bigger one (Prusa XL). Rack has standard sizes, see…
![Raspberry Pi NAS / Server Case [3.5 HDD] [Mac Pro 2013 lookalike]](https://media.printables.com/media/prints/156827/images/1466768_f9a7bf10-02b0-494f-aa7e-e80efc89f8a6/large_display_img_3290_156827.jpg)
