1,265 models
Xenomorphic six sided die. Added new gcode (2/21/2024) This worked awesome. I loaded some pictures. Minimal supports on the outside and no supports on the inside.
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant
Better version shipped with HSW Screwiverse: https://www.printables.com/model/488798-hsw-screwiverse-flat-wall-tapeglue-brackets Attach this bracket to a wall using TESA Powerstrips or a similar product. Hotglue might work as well,…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
No supports needed! This is an alternative d4 that deviates from the standard triangular pyramid design and uses a 3d kite-shaped diamond instead (or two square pyramids bottom to bottom if you prefer). This design is usually easier to…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
The model has been designed for a multi-color printer, but it's easy to limit printing to a single color by printing only the Dodecaedre v9.STL file contained in the Dodecaedre v9.3mf project file. For moncolor, all other STL files must…
Print approx. €4.33–€5.29 excl. taxPreliminary estimate for PETGSource material: PET
Handy handle made of PLA. Attached in two ways Stick it on the double-sided tape fasten with a 3mm screw Printing parameters: filament: PLA infill: 20% time: 12m Wider spacing will allow you to attach more cables. Dimensions: Width: 25mm…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Wonderful art inspired from Sean Ward designs on a Kleenex Cover box., his pattern repetition, and illusion made a awesome design for the sides of my Kleenex holder box cover. His art is a Drawings, Ink on Paper of various sizes. This…
Print approx. €17.33–€21.18 excl. taxPreliminary estimate for PETGSource material: PET
8-sided role-playing dice numbered 1 to 8 in Eladrin and small numerals. The model has been designed for a multicolor printer, but it's easy to limit printing to a single color by printing only the Octaèdre.STL file contained in project…
Print approx. €5.58–€6.82 excl. taxPreliminary estimate for PETGSource material: PET
Twenty-sided decorative necklace. Dimensions 30mm 17mm 17mm. Hole dimensions 3mm.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
segundo pack de llaveros en forma de gatos
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for one variant
There are several ways to select the next section of the track in Thunder Road. I opted for this variant. These are road tiles to choose the next Route. Just put them in a bag, shuffle them and draw one. No support needed Colour change at…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant
Comfortabel und funktioniert
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
Thanks to Just Joshi for this original part. The Shelf has a depth of 36.5cm. There are 2 variants in the width, one with 18cm and one with 20cm. Therefore it fits on all 3 Skadis models. !!! Attention: You need a big printbed to print…
Print approx. €12.27–€14.99 excl. taxPreliminary estimate for one variant
Printed at 240 nozzle for better fusion and 2-% infill
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
A very quickly designed planter for Vase mode printing. I used a 0.6mm nozzle, 0.35mm layer height and a 1.45mm line width. If you want to riff on the design the Fusion 360 model is attached (please remember attribution if you do!) Print…
I created double sided version of Kyle Cup V5 as it suits me much better :). Remix of design: MandicReally https://thangs.com/MandicReally/Kyle-Cup-V5--NEW-DESIGN--Chad-Chalice--Stimulant-Stein--Monster-Energy-Drink-Can-Cup-17751…
Robux Coin 2 sideded remix
Hello Everyone I am sharing two versions of the modified Bambu Lab Scraper. I was annoyed with the original version because the Logo was placed on the wrong side. It should be visible when using Scraper. In addition, the project contained…
After I made the double sided standup sign , I realized the signs are a bit cumbersome to put away as you can’t fold them well. So I came up with this model which can be fully folded down. The sign has only a single side for the text to…
4-11-22 updated model with stl parts
This Butterfly Knife, aka Balisong, has grips on both sides for those who know their way around Butterfly Knives and Balisongs. I couldn't say it any better, so here's a quote: “This thing is wicked fun! It's not going to carve a…
A collapsing lightsaber, model Darth Maul, based on @3DPrintingWorld original idea. The hilt is designed from scratch, but the blade can be re-used. Designed using FreeCAD, the project file as well as my own FreeCAD template are included.…
This is a remix of jman1865's Magic the Gathering counters: I just made the counters double-sided, with +1/+1 on one side and -1/-1 on the other. The box from jman1865's “MTG +1/+1 and/or -1/-1 counters with case” will fit 19 of these…
Printed on PLA infill 50 % to be very solid and strong , i think its better if you can print it on PETG How about buy me a coffee buymeacoffee.com/spank7
In search of a suitable 19" rack mount for a Raspberry Pi 5, I couldn't find anything suitable. The model was inspired by LittleProgrammers' "Raspberry Pi 5 Rack mount," which however did not meet all of my requirements. These…
Set up a piece of cardboard and throw the star like a frisbee. It takes a couple tries but it will stick if thrown hard enough.
Images tell the story. Sort items quickly, then dump! Print in whatever you'd like.
This is the goldilocks ornament, not too big, not too small, but just right. It is 9-sided or Nonagonal, so looks really nice. It is 110 mm from the very top of to the bottom, and about 47mm at the widest point. I found many ornaments to…
After looking through a few different models online, I decided to create my own sink sponge holder and include some perforated holes that allow any water to easily drain away from the sponge - preventing moisture build-up . This was…
📏 Dimensions Diameter: 64 mm Height: 29.5 mm Easy to scale up by increasing the print scale Supports cables up to 4.5 mm diameter Supports cable lengths up to 2 m (depending on cable diameter) Always wind the required length first and…
VERSION 2 now updated to fix mesh. - Thanks to exdablju for the heads up. Thanks to Bday988 & Ohio for their original designs! Loved both of these ducts so much I combined the best parts, and added my own touch. Made it translucent so you…
Double-sided Prusa keychain to be printed with automatic color change at a given layer height or just in a single color. It's a fun and easy print that can be used to showcase the capabilities of the Multi-Material MMU3 or simply to show…
Just simply, a blank 20 sided dice. Used for boardgames and miniature warfare. Its blank so if you want you can add your own graphics to each side when u print. Feel free to remix it with your own shapes or send me a PM if you have any…
40' Smooth Sided Intermodal Well Cars used for transporting shipping containers across the United States. Parts can be printed using resin or FDM. The files contain sets for either a 1, 3, or 5 car string. Cars are already sliced to…
A simple 12-sided dodecahedron dice.
Double-sided carabiner for attaching things to a backpack or other equipment. Print-In-Place | Compact Design | Easy and Fast Print You can choose from 3 modifications of the double-sided carabiner and you can have in a normal or…
Included dice are three-sided dice (d3) that have shapes similar to four-sided dice (d4) . For each die after rolling the result is what will be seen at the top of the die. Those are standard dice used mostly in games that need d3 dice!…
Included dice are two-sided dice (d2) that have shapes similar to six-sided dice (d6) , but with joined parallel faces. For each die after rolling the result is what will be seen at the top of the die. Those are not standard dice used…
Updated Model - See changelog Change log: Made the infill MUCH lighter on filament consumption, will also print much quicker; Improved chamfer dimension to make it easier to separate both parts; Made snapping tolerance better and shaped…
D&D coins including copper, silver, gold, platinum, and electrum. Some avatar the last air-bender coins are included.
The Double-Sided Spinner Bait Tackle Box has two compartments with lids to store 15 lures with a max length of 95mm. The compartments are designed to securely hold and protect each individual Spinner Bait from damage or tangling. The box…
Print Settings: 0,1 mm Layer-height NO support needed 15 % infill
its a Icosahedron 20 sided dice , it can be used for fun games
V2 added which is 10mm winder, larger opening at top exposing the printers exit shoot allowing larger poop to slide through and 3 degree more slope giving it about 14mm downwards angle With version 2 being lower you’ll either have to…
Show off that "No Hitter" ball or a great autograph you acquired with this holder that is based on a three sided pyramid. Posting photos of your printed work with the baseball would be much appreciated. Check out my other baseball stands:…
Yarg, I took the original and made it double sided in Matter Control. It prints upright, I printed on a Kobra 3 combo with a brim. Cryoplate 50C bed temp with sport mode just fine matey. If one of ye land lubbers prints it without a brim…
Inspired by tension meter inspired by Prusa but with a gauge on both sides, optimized for ABS. I use it to tune the belt tension on all my Voron printers. Since I mainly print ABS it's been optimied to give the best results when printed…
This is a collection of dowel pins with a one side truncated so they can be printed horizontally for maximum shear/bending strength. I use these all the time for moving parts or multi-part prints so I made python script to crank out pins…
Letter beads - the whole alphabet Informations: Set of letter beads, in two versions: double-sided (2S) and one-sided for easier printing. Sets include the entire alphabet, numerals 0-9 and three special symbols: heart, anchor and cross.…
A simple 2 sided dice, coins are overrated. Category: Dice
A single-center dual-sided picatinny rail.
This is a remix of some models Jaime Tachan (jtachan) uploaded on Thingiverse. I have made the coins double sized, smoothed the outer edges and sized each coin to match some other coins I purchased online. The Galleon coin is roughly 39mm…
You know what's fun? Solving those sliding puzzles, where you have to slide the tiles to get them to the right sequence. You know what's not fun? Scrambling those sliding puzzles after you just solved it. There are several print-in-place…
Needed a safe gasket scrapper, after buying a Permatex set I thought their handle was a little long and uncomfortable. **A few have been printing the handle to use with other blades requiring scaling of the handle. I used this Permatex…
This print is comprised of 13 printed parts (1 core and 12 buttons) as well as 12 cherry-style key switches (the clickier, the better!) The buttons print upside-down and don't require any supports. The core will need some supports, mostly…
Intro A smarter, more sustainable bed scraper built to last longer and reduce waste. This 4-sided design gives you four fresh edges — flip it as soon as one side wears down, extending the life of the tool and keeping it effective longer…
Dual Sided Auryn Pendant/Earring resize to your liking.
Super simple, easy to print, nice looking towel hanger. No support, no brim, no raft needed :) Model included files for different shower glass thickness. 4-10 mm. If You need other glass thickness let me know, I will prepare file for You :)
Remix of the Hasawi 2 (nuts bowl) no raft no support infill irrelevant Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Resolution: 0.16 Infill: 5% Filament: ERYONE PLA Glitter silver Category: Kitchen & Dining
This model is heavily inspired by the amazing Mini Floor Stand by muzz64. It is not a remix however as I made the model from the ground up and came up with a simpler design that also has tighter clearances in the hinges for less wobble.…
This jig will hold your PCB and solder paste stencil aligned while you apply the paste. There's space under the PCB for components on the back side, and you can easily remove the PCB while leaving the stencil clamped in place, so you can…
Just another 3d printed “fabric” this one has a small unique feature. Pieces can be printed connected together ( print-in-place ) but also can be connected together after printing ( snap-fit ) - so you can mix colors, make the fabric…
I wanted multicolored resouces for Wingspan with color on both side. Original project was perfect, but those tokens was too big and too thin (3mm). So I resized them to 80% but made them 5mm thick while keeping 0.6mm top and bottom…
Cable grommet which screws into each other from two sides. Two models; one for ~4-6mm thick wood, one for ~10-14mm thick Used this on my camper. Might need to scale inside/outside part by 1% bigger/ smaller in X,Y to create extra…
Basic servo arm/horn that I remixed in a few minutes for all of your dual-armed needs! Surprised that there wasn't a model like this already considering how easy it was for me to make, but hey, there is now one of these ready for your…
Update May 8th 2023: Unfortunately I made a mistake and uploaded a wrong .stl file! The .gcode file is ok… @Herbi_16692 made me aware of this, thanks for that! New file is uploaded… I apologize for all wasted filament and print time! Are…
Remix of another bowden coupler that I had some issues with. This retains the same coupler but splits the nuts into separate print files (print two of them - both ends use the same nut) and adjusted the nut to be easier to print (at least…
The sandballs will have a diameter from 55mm. Models: Ball Cube Multi Sided Cube Print this model 2 times and combine them with a 5mm bolt. Have Fun :-)
Print 4 corner pieces - these clip into the corners of the K1Max frame. Slot perspex sides into place. Grey/neutral tint perspex matches K1 max panels well. You'll need 4 pieces 350mm x 60mm, 5mm thick. I printed with 4 walls / floors,…
This double-sided sliding puzzle cannot be solved completely - if one side is in the right order, the other side will be out of order. A never-ending task ... Notes: Print with 0.4 mm line width and 0.2 mm layer height. If the fit is too…
This is a REMIX from both BillyAlt and wjwdesign on TV here: https://www.thingiverse.com/thing:5547902 There are 2 Versions: Lightweight and Full plate Printed In PETG @ 230/80 3 walls 4 top and bottom .6 nozzle = .24 LH / .8 LW 25%…
Also posted on Thingiverse (9000+ downloads): https://www.thingiverse.com/thing:4868025 --- I designed a simple two-sided hook for my glass wall shower cubicle. It is sturdy and easily holds wet towels. I have even dried a packraft and…
Made these to help my son learn multiplication. Throw the dice and multiply. I didn't come across any die that I liked, so I made my own. Goals: Easy to print Color Options for printing Fun Two options to print. This model is made to…
Feel free to buy me a pizza if you want. Contributions appreciated but never expected. Love the original flags but it bothered me that the numbers were backward for the opposite side so I created these flags with the score on both sides.
I love the original “Tokens of Inspiration” by Conr8r but after printing it I discovered it was a bit too large and wanted something the size of a regular coin. I tried scaling it down to 50% and printing it laying flat, but the result…
Fits pretty much any standard-sized 28x47mm clip-in hygrometer or thermometer. There are two versions. One as a free-standing 45° angled stand and one that is made to be sticked to a clear container (filament storage/larger drybox) using…
The original cover suffocates the extruder from air causing it to overheat overtime. It does not use the 5015 blower fan to its full capabilities due to the poor airduct design. My design allows the full hotend assembly to breathe and the…
This is my attempt at a soap dish. My wife makes soaps for a while now and I wanted to create her something. But in some places you want a closed soap dish to prevent soap residues. In other places you want a drained dish to get rid of…
Info: I have remixed original from Stevehlau (thx for idea & great design!) I have remodelled it in Blender: very simple geometry, so anyone can adjust it to different dimensions (every sink is different) it consists only from <50 vertex…
This is a double-sided version of my Fast Print Hexmaille Fabric . It doesn't print quite as fast, and it's not quite as flexible, but it's smooth and shiny on both sides! This was originally inspired by TurboDork's NASA Fabric , which…
I made wire channels a little wider to accommodate thicker wires (24 / 26 AWG). I also removed part of the edges surrounding the LED so that it is easier to rotate the LED around to position it just right. Removing that material also…
This is a parameterized sponge holder that hangs on the center separator of your sink and can hold two sponges. If you want it single sided, there are two other versions: Right Sponge Holder Left Sponge Holder It's parameterized so I…
Large “One-Way Pound Town Ticket” double-sided ticket for the MMU. I also included a single-sided version for a normal printer; just pause the print to change the color for the text layer. Size: 138mm x 70mm x 1.6mm Note: I designed this…
Baseball display stand based on a four sided pyramid. Show off that "No Hitter" game ball or a great autograph you acquired. Posting photos of your printed work with the baseball would be much appreciated. Check out my other baseball…
9 Sided Drip Tray designed to match the 9 Sided Twisted Planter. If you're using the twisted planter for a plant that needs drainage holes, poke a few holes in the bottom of the planter and print this matching tray to go underneath. My…
This new key chain displays your name double sided. It is designed to be printed with a multi material printer for 2 colors. Just open it with OpenSCAD, and export the text and the frame in two files, and load them both as one object in…
One version with spacers so you can use the original length M4 screws. Also included an M4 Nut for the aluminium profile. The nuts twist into the alu-profiles when you fix the bolts.
Included dice are four-sided dice (d4) that have shapes similar to six-sided dice (d6) , but with joined parallel faces. For each die after rolling the result is what will be seen at the top of the die. Those are not standard dice used…
Zip Tie Mount with screw and/or double-sided tape Affix to a wall or surface using the 4mm chamfered hole with a screw. Or use ½" double sided tape. Feeling crazy? Use Both. Fits small or medium sized zip ties. (Zip tie channels are 2mm x…
Simple remix to accept filament from below rather than above. https://www.thingiverse.com/thing:3052488 Print instructions Category: 3D Printer Accessories
If you have ever made a rubber mold/impression of something and you had to use cardboard, duct tape and popsicle sticks…. it can be messy and frustrating. This six sided mold box can make your life easier and it is reusable. 3d scale to…
This version helps tackle the problem with the wall popping out when you are pulling things from it. It is secured with a bolt in both places and will not budge no matter what you do.
A simple Silly Shell holder! Originally designed for the Wildstyle Shotgun Pistol blaster. Two files are included. Holds one shell on either side of a picatinny rail. Symmetrical. Holds two shells, one on each side of a picatinny rail.…
Sturdy and simple one sided holder for paper towel rolls that is designed to fit on IKEA Skadis pegboard. Print instructions: Print without supports. 3 parts are needed: the base and two of each of the end pieces, pick depending on…
My Color Order: White-Red-Blue-White. Or you can go White-black-white. Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with…
A simple 2-sided dice pipped with 1 and 2, respectively. I also have some other types of die that are designed to be printed in place without support by a resin printer: 2-sided (D4 version): https://www.thingiverse.com/thing:5261013…
This fan bracket is made to add fans to your BeamCase. It comes in different sizes for 120mm, 140mm and 92mm fans of different thicknesses. The bracket is secured to the fan with standard fan screws and then screwed to the frame from the…
peter medallion with his face on both sides
A convenient case for your cutlery while on the go. The double-sided feature with divider allows you to always keep one side for your clean utensils and one side for used/dirty utensils. The two-sided design can also be used to store…
