SLIDE LOCK - DOOR BOLT (Tested)
Easy To Handle Slide Lock Scalable in slicer
- Downloads
- 4,360
- Likes
- 2,243
- Rating
- 4.9
5,687 models
Easy To Handle Slide Lock Scalable in slicer
Smoothly operating and very sturdy sliding barrel bolt lock thanks to the great original design by Jerry Lee With added “locked open” position and full FDM print optimized handle with threads, removing the need for glue. Update: per user…
Not sure if strikes the right tone, but for sure it is loud. This 3D Printed slide whistle will bring some fun. A quick two hour print (it don't needs support but some sanding may be required Inspired by the this Prusa Blog Print a…
Because I couldn’t find a pill organizer with a clean and appealing design, I created this compact weekly pill organizer that allows you to easily pour out your medication. Each drawer snaps into place using integrated magnets , giving a…
Sliding+Legolini+-+Pump-Action+Repeating+Mini+Bow Prusa Mini version This is only a remix of the original made to be printed on Prusa Mini Original by Łukasz Janikowski Print instructions Made for prusa mini printer. Print without…
A small desiccant Box with 1mm wide gaps and a sliding opening. 90 x 45 x 19.8mm (Base) 90 x 45 x 13.5mm (Short)
When I assembled the enclosure, I had already decided to treat myself to the hinged lid version. It is easier to clean the enclosure or maintain the air filter. But what didn't satisfy me from the start were—excuse my choice of words—the…
Large Pringle tray sealable, with flat edge for tray dispensing position and anti rolling. Printed on food safe PLA at 0.20 layer height no infill
No screws required, just slide it all together. Originally designed to be used as a RFLink case.
Three gift boxes to chose. Print both pieces in vase (spiral) mode. Use enough bottom layers to form 1mm solid base (i.e. 5 layers for 0.2mm layer height). Use 0.8 - 1.0 mm line width (this is External Perimeter parameter in Prusa Slicer).
A smart no-spill powder scoop designed for protein shakes, joint supplements, fizzy powders, or anything you mix in a glass or shaker. 🔄 The sliding bottom lets you drop the entire dose straight into the container 🥤 No more powder spilled…
Store a tissue box under your cupboard, cabinet, bookshelf, or desk to free up space. No more fumbling around to reach the last few tissues deep in the box. With this holder's upside-down orientation, grabbing tissues becomes a breeze,…
Update May 8th 2023: Unfortunately I made a mistake and uploaded a wrong .stl file! The .gcode file is ok… @Herbi_16692 made me aware of this, thanks for that! New file is uploaded… I apologize for all wasted filament and print time! Are…
Slide duplicator for Canon lens with a reverse ring. It can transfert 24x36mm slides on a 50x50mm frame. I use it on my Canon 50mm f/1.8 EF lens. For the assembly, you'll need: 6 M3x8 bolts + nuts 1 or 2 M3x10 bolts + female threaded…
Slider repair kit Fits: DT 790 / DT 797 DT 770 / DT 770 PRO / DT 770 PRO HT DT 880 / DT 880 PRO / DT 880 PRO HT DT 990 / DT 990 PRO HS 200 Dyn / HS 200 Rotor / HS 200 Trend HS 400 MMX 300 UPDATE - 30.10.2022: Some slight fine-tuning.…
Minimalistic design suitable for precision workshop projects.
--UPDATE-- I realized in my initial upload I only included the latest version of the lid, which has dividers between the samples holders. I have now included the original flat lid that has no dividers in case this is useful for you. This…
Since the door sliders in a garden shed break away and the replacements are quite expensive i remodeled the part. I did my best to replicate all dimensions, but was a bit liberal with the width of the rail for ease of printing. Since the…
A plant pot inspired by the intricate structure of a slide projector. Used Filament: This model was printed using PLA Mineral Natural from Fiberlogy. The PLA Mineral series is our all-time favourite! The amazing texture of the finished…
Two part storage toolbox for 10pc 1/8" (3.175mm) carbide tool bits. Box has a sliding lid. >> If you like it, please leave a like, a make or a rating… :) Print instructions Layer: 0.20mm Infill: 50% 2 perimeters, 2-3 top and bottom…
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
Rolling dice are meant to be seen - this waterslide dice tower lets you watch the dice slide, down and roll on the bumps. The original version v6 is a true slide and the dice usually do not roll at the end. The latest version v7 is easier…
Hello, Today I have for you the Anycubic Kobra S1 poop slide . The slide attaches great and the humps slide nicely. No need for screws or glue ! It holds great on its own. Good luck with the printing! I used PLA/PET G as the material. You…
With these parts you can close the Enclosed MMU3 top cover opening while allowing for easy removal of the MMU3 top cover. The sliding cover helps in controlling of the Core One enclosure temperature, but I also wanted to be able to easily…
Honeycomb Storage Wall - Combination Square Holder - Lufkin ProSlide
Inspired by the recent push by Prusa research to design and manufacture useful items in the fight against coronavirus, I thought I would share some items I designed and use regularly for research in my lab. While the current diagnostic…
This slider snaps into the generic ClosetMaid shelving, no need to buy the special SuperSlide shelving. Print instructions Super simple print, no overhangs. I chose PETG for its superior strength and UV resistance. Link to source OnShape…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This is a remix of Shawn Gano's…
A nice Cylindrical Slide Rule in base 10 that you can easily extend! You can easily multiply or divide numbers (and simplify fractions!) using the logarithmic scales. Print as many copies as you need and stack them to chain operations!
A replacement slider assembly for Beyerdynamic T90 and T70 headphones. Looks like it will probably fit T1/T5 and others.
You need a square nut M3 and an Allen screw M3x6mm
This is a set of infill swatches to match the “35mm slide”-style filament swatches created by George. They have the same external dimensions, and the filament “window” is roughly the same dimensions and orientation as the sample image on…
This is a chute for reusing packaging waste from yogurt pots or the like. You can use it as a table trash can to make cleaning easier. Or you can use it as a collector for small parts. The first thing you need is hunger. For example, try…
Een gewoon schuifslot, ik heb er ook versie bij gedaan dat je kan sluiten met een veiligheidsspeld. De veiligheidspin kan je kopen in de ijzerwinkel. Ik heb ze niet afgedrukt. An ordinary slide lock, I also added a version that you can…
This is a support to allow microscope slides to dry. Gaps are 1.5mm wide. Fits 20 slides. Simple print, no supports.
Thread these onto weight belt to stop the weights sliding around. Best printed with tough and flexible plastic (PETG or nylon) with high infill. Should fit onto standard 5 cm webbing/belt. There is a file for the short (normal)-sized ones…
This is the “Rugged Box v3 60” for 35mm Slide Filament Samples (and also fitting my remixed 35mm Slide Infill Samples ) cut down to fit the bed of a Prusa Mini/+ or other smaller printer. There is also the option of a windowed top, so you…
Tired of people walking in on important meetings? This is a simple, two-part sliding sign that clearly indicates whether a room is available or in use. Just slide the cover to reveal "YES" (in green) or "NO" (in red). The best part? This…
🔬 Originally, I developed this tool to simplify the handling of medical samples in the clinical environment. 🧠🧬💉 The sides are curved for a better feel and the small dot helps to keep the slide optimally centered. It works for all…
Self designed alternative cover substitution for BK21-V27454-FCW on the inside of sliding door of a Ford Transit Custom Prequisites: * Some welding glue (like UHU Plast Special) * Some more bit elastic glue (like UHU Plus 2 Component…
This is for s 2022-2026 RAM Promaster. It slides over the cell phone holder. It works with vans with/without wireless chargers. Will Phelps at Alien Enterprises talked to me about reducing the cup holder print time and told me about his…
Now with sliding attachable sides! Now with Extension plates. New Coordinate frame plate I made this modular plate so it is possible to snap plates together with the peg-in-hole snap method. They can be used to quickly make todo list on a…
Since I didn't want to open the cover every time I wanted to use the flashlight, I constructed a compatible sliding cover. To avoid accumulation of dust, however, I did not want a hole at the location of the flashlight. The flashlight is…
No supports needed. Screw holes must be manually enlarged on one side of the long piece, to absorb the screw heads.
This is an upgrade of Hettich like sliding door wheel by using 608ZZ ball bearing. I've designed this around things I had available. Besides 608ZZ ball bearing, you will need M3 bolt, nut and washer to hold the bearing in place.
Modeled after the original AC temperature control slider knob on a 1990 First Gen Dodge Ram Cummins Turbo Diesel D250. Very similar in size and shape to the original. I couldn't find anywhere to buy a replacement knob as this is…
When the Core One purges filament during filament changes, it sometimes falls into the bed holder. Depending on the height of the bed, the filament would then solidify and fall to the bed. This simple part makes the filament slide…
This month's obscure part is a drawer track rear support bracket for "King Slide" brand drawer hardware.
Fills holes not used to stack. Also fills sides based on closing out the bottom of a stack.
T-Slot covers for the crossslide of my Emco Maximat Super11 lathe. Crossection od profiles measures 11 x 13 mm and have various length. This set fits for my position of the compound rest. Length changes when you change position of the…
Delimano Air fryer (LQ-2501) sliding clip from the basked handle. The original translucent clip was broken so I prepared this new one. Recommended print settings : Print with PETG or something more durable. Print with 0.2 quality layer…
I recently made a safe stand to place my Pulsar Puffco Peak Pro Hydroslide Recycler Top Glass on when not in use or storing it away. The way I designed it makes it fit nicely, and the base platform keeps it from tipping over. I think it’s…
Features: for PLA adjusted height 1 to 1 replicant doesnt work for PLA → breaks on mounting no support needed but brim very helpful Disclaimer! Clean Printplate needed for supportless print. Speaking from experience :( I'm not sure if PLA…
I designed this door handle to get an handle from the outdoor.
PLA 0,2 mm no support
I needed to push the drawer as far back as possible. As the metal contact surface would eventually damage the car's plastic, I made this foot that slightly lifts the drawer and moves and extends the contact surface back into the car's…
Goes on toothpaste tube togrt all of the toothpaste up to the top. Inside dimensions: 60mm X 1mm X 10mm
Unlike the original Prusa XL spool holder which is too large for Master Spools, this remix offers a more compact design specifically for them. While maintaining 100% compatibility with the original setup, the redesigned holder has an…
This is an add on slide-in/out stage for the Universal Microscope Stage (USM) that includes a hole for light and three smaller holes for the attachment of a stage caliper. LED light “HeHe” Traffic safety Walking LED (Amazon) ""Pomya"…
Sliding base for garden table, oval, 25 x 50 For oval tube feet 25 mm x 50 mm. Glide over small irregularities, such as on stone floors, better than the purchasable models. For fastening, a nut with screw M3 can be used, but is rather not…
Ikea Mulig drying rack lift anti-slide lock. I experienced this when I lifted the rack around. This lock keeps the rack locked when it is lifted, preventing the drying rack from sliding and wrinkling the clothes.
This is an attachment for the Hasselblad A12 film back to hold the dark slide while shooting. This is a remix of the model from JayMoney, who also did a remix from the original version posted by tillari on thingiverse.com. Print…
A simple stand for PROIRON dumbbells seen below, designed for them to slot in perfectly. It was made with a set of bases to slide across carpets with easy, allowing one to 'shove' their set of dumbbells under the bed or cupboard. Please…
Summary: Repair of a rolling device for cutlery drawer inserts After breaking the original part, the opposite left part was scanned with RevoScan Mini. The processing was somewhat time-consuming due to the size, especially the…
This will snap into most sliding door handles to provide a pathway for curtain rollers to not snag onto the edge of the sliding door handle coming down or up. You can adjust the height in Cura/other software to fit the height of your door…
Replacement slider inside vacuum valve. Mopar part #3748429, C-body cars 1974-78. Might work on 1969-73 (Mopar #2950115) also despite valve being different externally. I have multiple valves and all of them had pin sheared off due to old…
I printed this laying on its side with Creality PETG on a Ender 3 v3 SE. Made in Tinkercad.
I have several sliding doors in the house. The one metal handle is still OK but all the plastic ones are broken. I made these out of PETG but PLA might be OK also. It was a popular pocket or sliding door style in the 80's.
VW Sharan I front seats railing replacement spacers / sliders. Modeled them as close to the original as possible, however I found that they are a tad too loose. They work great, there is just a little more play, you may consider printing…
EyePatch EyePatch is a physical privacy cover for the front-facing camera of a smartphone. I wanted something a little more substantial than the tiny adhesive webcam sliders. EyePatch clips onto the top of the phone and physically blocks…
The final word in squad organization and identification. Description Included: A 1-color variant dial cover A 2-color variant dial cover 2 target lock tokens (open) 2 target lock tokens (filled) 1 small base ship identification ring with…
A compact and satisfying G26-style fidget keychain featuring a smooth, functional sliding top. Designed for stress relief, display, or everyday carry, this mini model keeps the iconic look while staying completely safe, non-functional,…
👍 Don't forget to Like and Collect it, so you can easily find it later! ⭐ Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Please don't forget to hit the like button if you find this model useful. This is a 3D printable replacement slider for both standard and reverse bale zippers. A key feature is that it can be installed without needing to unsew the zipper…
My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ? I found a beautiful slide (thank you - erickson85!for sharing of your cool model!)…
UPDATED: see the new and improved print here: https://www.prusaprinters.org/prints/103948-sliding-number-puzzles-print-in-place-15-puzzle These are my 3d printed version of the classic sliding 15 puzzle. I've also included a 3x3 8 piece…
Fun toy to play with. Triangle columns jointed together can slide up and down. The model is printed in one piece. No special settings/Supports required. Infill 5-15%. Layer height 0.2mm or less. Model on photos was printed with Bambu Lab…
I made the walls thicker so it's sturdier and added a sliding lid. Lid has a tolerance of 0.08mm on each side. Printed on my SE and the lid slides perfectly. I recommend printing the box first and then just a section of the lid to make…
A 3d model of the yeezy slides. I scanned it with polycam and then touched up the mesh in blender. If you want the blend file, ask in the comments! Please make sure to drop a like if you download, it helps a lot to support me! Edit…
A compact and satisfying Makarov-style fidget keychain featuring a smooth, functional sliding top. Designed for stress relief, display, or everyday carry, this mini model keeps the iconic look while staying completely safe,…
An elegant castle with an intriguingly hanging spiral slide, allowing you to enjoy rolling your coins down for convenient storage below by simply dropping them in the tower. This has been designed to simply be print-in-place, with no…
Use VHB Tape or screws to connect it to surfaces. Original Length: 100mm Short variant : 70 mm
My custom designed lid raiser for the Creality K1 Max. I wanted a simple version which required no additional components but allowed me to open and close the vents on the fly. Lid raisers for the K1 Max help improve the clearance between…
Fun toy to play with. Hexagon columns jointed together can slide up and down. The model is printed in one piece. No special settings/Supports required. Infill 5-15%. Layer height 0.2mm or less. Model on photos was printed with Bambu Lab…
NEW VERSION 2 : link After releasing two print-in-place card wallets, I decided to take a different approach for my next design—this time, not print-in-place. I revisited the drawing board and developed a brand-new design with an…
This is my 3D-printed version of the classic sliding 15 puzzle. I also included a smaller 3x3 8-piece puzzle along with a larger 5x5 24-piece puzzle. These are fully print in place, so the pieces all interlock straight off the printer.…
You will need 5 M2.5 x 8mm screws to attach the side to the body. Before you do that, simply insert the door into body part completely, UPDATE! After many requests I have added body and side model with M3 Screw holes and STEP files. Thank…
A parametric box with a sliding lid. You can (currently) adjust: Outside or inside width, depth, height Wall thickness Outside radius Text on lid, either engraved or for multimaterial printing Customizer Instructions Download…
Items should import in the correct print orientation. Glue the base to the sleeve to complete. Allow glue to dry before insert sleeve. Ensure enough perimeters so no infill is required (solid print).
A three parts magnetic sliding fidget. UPDATE: A new COVERED version is available! check it out! A great thanks to Scott's 3D for suggesting and testing the covered version! Available magnet sizes 10 Magnet sizes available: 6x2mm 6x1mm…
Have fun :) Both Versions 3 Wände / 3 Walls 15Infill Bambu also 2 Colors or other Printers with Break :) Regards
I recommend heat, bending and curving the flower piece a bit for easier fit. My next hair clip. Previous Bee & Honeycomb Slide Hair Clip is here
Since the updates are long and filled with images and a lot of people might want to skip this, so I put the updates at the bottom of the description. Summary Collection of different size of the HSW sliding box! The sliding box comes with…
Parametric box with sliding cover, stackable. For modifications use the freecad project (included) and use the "tab" speadsheet. Shoud works for common modification, but certainly not for all (it is my first try...)!
I added holes to allow fixing this Zipper Slider Jig with clamp . Clamp can be used on the sides, front or back
NO MORE kinked tubes, broken filament or issues loading or unloading. This is a NEW version of my other riser that now has an incorporated slot to relocate the PTFE tube through the riser! Also has a larger relief on the back corner to…
Easy access to your pringles
Update: Added 80mm height to: 120x80mm 80x120mm Added 80x160mm Stackable Slide Boxes – simple and practical storage boxes with sliding lids that can be stacked on top of each other. All boxes have a height of 40 mm and are available in…
A satisfying slider that makes a noticeable clicking sound while you push it up and down! Note! You have to turn on supports because some parts need to be printed to perform optimally. Is the spring not good? Too soft or too hard? Try…