Small Bushing for Piscifun Line Spooler
Lost one of the Small Bushings, so made a replacement. Printed with ColorFabb HT, Auto Organic Supports.
- Downloads
- 41
- Likes
- 11
- Rating
- 0
260 models
Lost one of the Small Bushings, so made a replacement. Printed with ColorFabb HT, Auto Organic Supports.
This model is a way to reuse the plastic part of a prusament spool. If you don't have a empty spool, don't worry, you will have it before you finish printing this model (it's become a little more bigger than i expect). Every wing are made…
You can use the PET Strip Spooler to easily store strips from PET bottles in compact form and nicely winded. Up to 7 spools will fit into the spool holder. The strip can be leaded from the holder to the machine for conversion to…
I looked around for respoolers but couldn't find anything that seemed as convenient as I wanted it to be. This basically adapts a universal spool holder by closing the inside of the shaft and adding a hole that perfectly houses a long hex…
I recently needed to respool a spool of filament because the original spool wasn't compatible with the Bambu Lab AMS. All already existing models needed some additional hardware, which I just didn't wanted to bother getting. Thus I…
Abwickler zum Umspulen von Filament auf eine andere Spule mittels Akkuschrauber wenn möglich im Übergang zum Gewinde 90% Füllgrad Die Version V2 bietet die Möglichkeit, innen eine Imbusschraube zu versenken, umd die Stabilität zu erhöhen.…
This orrery shows the revolution of the six first planets of the Solar system : Mercury, Venus, the Earth, Mars, Jupiter and Saturn. There are 18 gears driven by a crank. You need an empty Prusament Spool to build it. If you don't have a…
This is a spooler I designed for my flexible tape measure to be able to put it in a bag and forget about it. I first tried to find a model online but they were all either flimsy or had an open design. The spool is protected, winds up…
Filament spooler for splicing filament and getting them all onto a single roll. Save some money and reduce plastic waste. Good for everyone.
UPDATE: Thank you for taking a look at this project. I still use mine - but there is now a more active implementation of this modular idea that you would probably be better off printing. Please see:…
I created this design after looking around on Amazon for something similar and after scouring the internet for 3D printable solutions. I designed this in Fusion 360 and printed it on my heavily modified TrueUpLZ 3D printer. Print Settings…
Edit: 09-May-2023: Part #3 added: Before I printed my spooler I dragged every part into TinkerCad, an assembly. Two parts I remodelled marginally: The big base part was reported to be poorly fixed on your workbench, so I extended the base…
Print the screw sideways and use support for the bit that goes in the drill, the rest can be printed without supports. I used “paint on supports” in Bambu studio. Also for the ring, use inner > outer walls ordering otherwise you might…
→ neue Version: Filament Spooler Remix V2 Man kann die Sockel-Unterteile jetzt auch mit einer 0,8er Düse drucken, weil sich die Details nun am oberen Einzelteil befinden. Die oberen Einzelteile lassen sich nun einfacher drucken, weil sie…
Latest files are available on MakerWorld. Get the full Plate Print Profiles: https://makerworld.com/en/models/375151 === The original by @noahrr was one of my favorites, but I found the winding holes too small for my fingers, so I remixed…
Double speed at :25 Update 1 nov 2022 : added a Python script for creating gcode for different spools. See the end of the description. I got my hands for a few weeks or so on a new printer with an automatic filament switcher (AMS). Great…
I used a drill and a pencil to remove line from one of my reels, and it works OK . I figured I could do better. 1.0 wasn't much better than a pencil, but the file is there if you want it. For 2.0 I wanted to be able to attack it with…
Fishing Line Spooler Reel Winder portable angelschnur aufspulgeraet
Spooler axis remix for the original design from Miklos Kiszely
Reloadable master spool with 90mm center hub and 60mm flange spacing. This spool design appealed to me because it was threaded and used less filament than other reloadable spool designs I saw. When I printed it out as-is, I discovered…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATED April 20 2023] Other variants are published…
A crank with longer shaft for manual re-spooling when the hexagon adaptor for an electric drill is in place. With this crank you can turn the spool manually even when the electric drill adaptor is installed. The normal crank will collide…
Bored of cranking on the "Yarn Spooler Frame" #3954918 I decided to motorize it. Often I have filament rolls coming to an end, so sometimes I respool those on smaller spools for saving some space. With tara weight on the different spools…
Just some minor improvements. See summary
Quick and simple spooler for a 200cm / 20mm tape measure.
09/17/22 update: If the wingnut continues to loosen when the spool spins, you can rotate the base 180% and flip the fishing line spool 180%. Or you can add an extra jam nut before screwing on the wing nut. After overpaying for 200yd…
This simple filament spool holder is based on the original ones shipped with the MMU2S upgrade, however in a smaller form to fit five of them in a common plastic (almost) dry container. Although there are many amazing holders and dry…
This was created to fit on the Bambu Labs spools that came with my P1P and AMS. I normally by Inland filament from Microcenter. I wanted to try and use their spooless filament as it is $2 cheaper per roll of PLA+. The fit of these rolls…
Simple guying line spooler. I made it for my amateur radio station. You may also use it for kite or as a general paracord spooler. Print instructions Thin version is 5mm, thick is 7mm. I printed this from PET-G.
This is a fix for the V-spooler. The Cam guide stuck and I had no luck with it. But another user on bambulabs had made a wider guide and a larger cam tooth. so I made the files myself and now it works a treat.
Hello~1 This is a remixed plug for the factory spooler hole on your printer. Hand turn to install/uninstall. No tools required. I highly recommend printing with supports and keep orientation exactly as displayed on the image.
I made this to make putting new line on my reel a one person job, and it fits in the tackle box.
🟩 🟦 🟦 🟪 🟥 🟧 🟨 News: Via a request from my Printables club there is an alternative version of this model for V-Spooler and V-Spooler X models equipped with the new linear rail mod available on the Files tab! This model was a request via…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a page for the common V-Spooler options that fit V-Spooler , V-Spooler X and V-Spooler Mini . They are available pre-sliced for Prusa XL and Bambu printers, and also in un-configured 3MFs for other devices. Clamp &…
Edit 28-Dec-2025 : I apologieze that I forgot one complete subassembly. I missed the filament guide system. I added it today. Sorry for any inconvenience. First of all I like to kindly thank @GekoPrime for his development of the base…
I got a bunch of (Free) tiny 250gr spools from chinese scammers but since those won't work with most auto-filament-feed systems I needed a way to re-spool the filament on regular 1kg spools. I don't need it to be tidy only to be on spools…
A simple solution for re-spooling filament onto a spool! The re-spooler has 3/8-16 inch UNC threads incorporated into the design. Print the re-spooler wheels twice, and use a 3/8-16 inch UNC threaded rod or sufficiently long bolt with the…
Model by @bmsluite I just added some holes to save filament. Pls use all stls vom Original Model and just my base-frame. You can print it with 0% infill.
Introducing the 8mm hexbolt remix of the very nice model made by Geert Bevin. I found myself in a situation that incorporated big filamentspools, printers of various sizes, not enough desk space and a considerable amount of small presents…
This quick, 2-part filament respooler is designed to print fast and will fit most spools (48 - 60 mm diameter holes). I added a 6 x 95 mm bolt as a tensioner. The left over part will be held by a cordless drill for simple respooling.…
Someone commented on my make of the original asking for the files I used from my make. figured if one person asked there probably going to be more. So I decided to make a remix Model is exactly the same as original just w/3D printable…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a re-mixable release of the V-Spooler gearbox cover and main drive axel to allow other makers to create motorisation modifications to V-Spooler and distribute them separately. There is also an official motor mod…
The Recreator3D.com - Mini Spooler, Holder and Enclosure.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** In this version, I made a few improvements: thinner…
This remix uses a 1/2" socket hole because that's what I found convenient to use. Compatible with gen 1 & 2 of the universal spool holder. For the quick-lock nut you need: 3x M3x8 ISO 10642/DIN 7991 Countersunk Head Screw 3x M3x6 ISO…
No Supports, Thread custom designed for easy/clean 3D printing. I made this as I wanted something simple that didn't take up space for the rare time I need to re-spool filament. I suggest using your drills clutch on 10 if you have that…
Spooler for Mk4s . Spool with hole Ø55 mm Print instructions For Spool with Width 100 mm or less and hole Ø 55 mm
Because of the annoying filament ends on bought spools, I was looking for a solution. One is moving the filament to another spool, ensuring the end (or beginning) on the new spool will not be bent. So I went looking for a spooler and…
Hand crank for the Pastamatic spool rewinder. I like the idea of a hand crank but the original design was difficult to use. This one has more clearance and a longer bit. I also made quite a bit of changes to the appearance. Let me know…
Print using the provided 3mf
People said the .3MF file was not working, so I have uploaded an .STL now. Print like this: non brim 15% infill gyroid 3 wall loops
Some feet that can be used to lock the “yarnspooler” filament spooler down. Original model https://www.thingiverse.com/thing:2863263/comments
25% infill or higher works best for me. PLA or PEGT
for English Documentation and Video see below Achtung: es gibt ein Nachfolgemodell: einfacher und flexibler: https://www.printables.com/de/model/853272 Diese gebremste Filament Zuführung passt unter anderem zu meinem Filamentspooler . Sie…
Drive adapter to use a Drill with the V-Spooler re-spooler.
Scuba box is a very popular box in Europe. It is actually the best waterproof and air tight box that I could find. I live in a tropical island so I needed something really waterproof to protect my filaments. I tried many models of boxes,…
this is an remix for 3Djake spool for Bambu Lab Filament Spool Switcher & Winder system by @MiklosKiszely_486882. I just scale the original file of centering disk for bambulab spool and then insert “ 3Djake " text, to recognize at first…
an end cap to prevent the spool from falling from the spool holder
Inspired by the spool locking mechanism of the spool rewinder by jcjames_13009 I remixed the flat 50mm Spool holder of the wonderful Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder by Miklos Kiszely . I use the Bambu…
To improve thermal control of my 3D prints on difficult plastics, I moved my Prusa i3 MK3s into an enclosure. The enclosure dimensions was chosen to place the filament reel outside enclosure. I opted for a spooling solution where the…
I'm a big fan of using the V-Spooler, but I use filament from various manufacturers. Although I've tried several adapters that others have shared, I wanted something a bit different. Drawing inspiration from those designs, I created a…
Spool holder to facilitate the loading of backing and fly line on a reel. This makes it easier to control the line to get a smooth and flat wind in the reel. It sits on the bottom section of the rod. I printed it with PLA and supports are…
I buy a lot of Sunlu Filament, and the spools run great in the AMS… but cardboard spools and other shapes/sizes not so much. I just respool any problem spools onto my Sunlu spools using this adapter.
I was looking for a cheap line spooler that I could use anywhere and not have to rely on a suction pad and smooth surface. I came across this online and thought, “I can make that”. And here's the result. It fits any size rod from 7mm…
This re-spooler works similar-ish to what the Filamentalist project uses but is adapted to work with the "Auto-Rewind Spool Holder for RepRack" and some inspiration taken from the re-spooler in the 8-track project . For full details head…
I printed it in Sunlu PLA+ using the 0.2mm Strong OrcaSlicer profile (6 walls, 10-15% Cross Hatch infill) on my Bambu Labs X1Carbon. A brim is wise on the axle, or it may lift at the threaded end. No supports are needed for anything…
A lightweight antenna spool for portable radio operations. My use has been with 10.5m of thin gauge cable. Category: Sport & Outdoors
I bought used g29 wheel and it didn't come with wire spooler, so I designed one. This is a bit longer than the original one to accommodate more cable. Works with Logitech G29/G920/G923. Probably works with G25 and G27 too. I used M3x10mm…
ENGLISH: Setting up a bearing system on the large wheel : Materials required: 2x 608ZZ bearings 1x threaded rod 8mm diameter, 152mm long This system is added to the original system, avoids waste. 1. Print the bearing holder part in 2…
I made it possible to use the DC Motor Mod with the latest version of V-Spooler 1.0. Other published motor mods are incompatible, so I had to make some changes. ✔ I used the cheapest motor ZGA37RG from Aliexpress (…
To create the 2 parts for the filament guide, I scaled some parts up so the teeth would be relatively smaller. So the HEX hole was made bigger, the slider with the long slot are made bigger. In the 3MF file the 2 parts with teeth are…
I am a big fan of all of the upgrades designed for the BambuLabs ReSpooler by @Damian27 . My printer (BambuLabs X1C) struggled to print the Handle with no supports. So, I thought I would give a shot Designing one that is a bit more…
Robert Mauser Spooler for Formfutura refill filament
Needed stuff, made stuff. I have couple of spools slightly over 70mm width that didn't fit with the original axle so slimmed the stoppers down. Axle is basically remodeled in OpenSCAD since I couldn't mod the original STL. Also the…
Print two of them. Uses a 5/16" threaded rod, hex nut, and wingnut. Place your fishing string between the two halves and clamp the two pieces together with the wingnut. Put the threaded rod in a drill and spool up your fishing line or…
The design is similar to that of FbeauKmi's Filamentalist F1 but adapted for the BoxTurtle. Print parts (for 1 respooler) ABS 2x Wheel.stl 2x Hub.stl Settings : 20-40% Infill TPU 95A 2x Tire.stl Settings : please activate Spiral Vase mode…
I wanted it to go on some 6.5mm drill bits I have laying around.
Device for winding a fishing line with a screwdriver or electric screwdriver Bom: • M5 screw • M5 nut The «cone» and «fixing_nut» do not require supports. The «shaft» is printed with support. The hole must be cleaned on the «fixing_nut»…
Look, it's a cross stitch thread spooler thing that can be spooled flat so it's easer to stack it into a carrying case or something I don't know. Look, this is a model that came with a cross stitch kit I bought ages ago and I needed more…
Printed in regular PLA of your choice. The MODEL is created in ONSHAPE … you can look/modify (a copy) ……
Take instructions from the original. The only change is the modification from 9.5mm to ¼" (6.5mm).
Adapts the V-Spooler standard axle to a DC motor. The motor I used is - Greartisan DC 12V 300RPM Gear Motor High Torque Electric Micro Speed Reduction Geared Motor Eccentric Output Shaft 37mm Diameter Gearbox: Amazon.com: Industrial &…
This is a re-mixable release of the V-Spooler X gearbox cover, right lower support bracket, vanity plate, main axel and the drill option attachment to allow other makers to create motorisation modifications to it and distribute them…
Spooler Adaptor
This is just a tiny addition to the "Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder if you use AMS" model created by @MiklosKiszely_486882 . I simply designed an adapter model that fits seamlessly with his system,…
I tried to print several tape measure models from printables, but I could not print them right. So I designed mine, with a print-in-place design, although you will still need support for the axle. my tape measure is 15mm wide and 150mm…
Parts List: 5x M3x4x5 heat set inserts 1x 608 bearing 4x M3x10+ SHCS 1x M3x14-18 SHCS Assembly is fairly straightforward. All of the heat set inserts are designed to be inserted from the bottom (i.e. they are “pulled through” when…
Suggest to print with PETG Z=0,3 3 perimeters
To seal off the remaining holes when not using the spool holder at the back of the printer. The fit can be somewhat tight, depending on the material, so might require a bit of persuasion, optionally by using any type of pliers or wrench.
I have a lot of problems with the original Boxturtle Respooler wheels. The original design worked fine if you used PLA, but it didn't account for thermal expansion/shrinkage of ABS. Even with my chamber temperature stable(60c +-1c), the…
This is a Makrame yarn unspooler for when you have the same problem my wife has. Those giant Yarn spools need stable feet and if you don't want to log around a heavy stand for those this stand is designed to be held down by two cheap…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 These models are easy to fit slide on adapters to fit broken spools to V-Spooler and V-Spooler X for re-spooling via the central hole typically found on filament spools. Everything fits together by hand and there are no…
This is the simplest and easiest to print adapter for re-spooling filament on an empty spool. You will need: - 2 pcs of this print - 1 M6 x 80 or M6 x 100 mm screw (lenght is not crucial - it has to be around 20-30 mm longer than the…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** In this version, the improvements are the same as the…
This is not standalone, combine this with the Ultimate Filament Respooler . Print it, and stick it on it. It is flat, but holds just fine.
Additional hardware: 4x M3x12mm flatheaded screws 2x M3 threaded inserts
Acknowledgements This is a remix of the excellent re-spooler made possible by a collaboration between Gregor Trierscheid (mechanical design) and Werner Riemann (kinematics, electronics and firmware). Those guys deserve all the credit for…
This is a modular cord organizational system that is designed to help wall mount and organize your cords while using the least amount of space possible. Everything is designed to print without supports. This project is a work in progress,…
I needed a winder for my Paracord Spools: http://www.thingiverse.com/thing:4831426 After a search, I found I liked jonmessenger's Yarn Winder ( http://www.thingiverse.com/thing:2863263 ) the best, but it wouldn't fit on my print bed. A…