Search results: usher

Sort order

630 models

P
PrintablesRanderzs

Can Crusher 2.0

Full make of can crusher 2.0 6338K413_OIL-EMBEDDED FLANGED SLEEVE BEARING_6338K413 90034A029_LOW-STRENGTH ZINC-PLATED STEEL THREADED ROD 2_90034A029 92949A835_18-8 SS BUTTON HEAD HEX DRIVE SCREW_92949A835 And regular house screws to mount…

Downloads
1,479
Likes
396
Rating
5
P
PrintablesColgS3b

Aluminum can crusher

Can crusher for 355 ml (12 fl oz) aluminum cans. Also works for 221 ml (7.5 fl oz) cans. Made with a bottom that centers the can. Also, there are drain holes (so make sure your can is empty) to aid in cleaning and poking the can back out…

Downloads
991
Likes
74
Rating
4.82
P
PrintablesHD_Creator

Folding propeller for pusher and tractor planes

Application This is a high performance 6x3 propeller for RC model airplanes. The 6 means it has a size of 6 inch in diameter (roughly) and the 3 means that is has 3 inch of average pitch. Thanks to the straight form, without the usual…

Downloads
835
Likes
101
Rating
5
P
PrintablesCurtAssWil

Groundhog Stake Pusher

Remix of @lukfilipsk stake pusher.

Downloads
45
Likes
5
Rating
0
P
Printableswaldgeist

smooth, roll-scratcher & roll dry brusher

This rolling scratcher helps to relieve itches on any part of the body or provides a gentle wake-up massage, similar to dry brushing. It can be used directly on the skin or over clothing. There are two versions: one with a less smooth,…

Downloads
12
Likes
4
Rating
0
P
PrintablesKilotick

Can Crusher Catch

I bought a can crusher and noticed it had mounting points for a collection bin. After some research, I found the bin was surprisingly expensive, and more importantly, discontinued. So I designed my own, and gave it some personality while…

Downloads
1
Likes
1
Rating
0
P
PrintablesTinyTexas

LW-PLA/PLA RC Plane - Pusher Propeller (PProp)

Hello There! This Pusher Propeller ( P-Prop ) Plane is a model designed with the goal of being close to 100% vase mode printing and is capable of being printed in both LW-PLA and PLA. (UPDATE 2/5/2023): A new wing design with support for…

Downloads
3,274
Likes
451
Rating
5
P
PrintablesGeorgeE

Simple can crusher

This is a standard 330ml can crusher design that I published on Thingiverse a while back. It is inspired by a design featured on 3DPrintingNerd's youtube channel. For this version I've thickened up the body from 5mm to 7mm and the 3mf and…

Downloads
2,235
Likes
297
Rating
4.54
P
PrintablesSem

Grinder / Crusher

Herb Grinder with room for a magnet. has been working for some time now without any problems! printed at Layer height 0,15 no supports needed there is room for a small magnet (5mmx2mm) (you will need some glue to hold it in place) In my…

Downloads
2,234
Likes
131
Rating
4.83
P
PrintablesBounet

Bambu X1 clog pusher

Had my first clog on my Bambu X1 and realized it was not an easy task to clear it as is :) Jump into cad 10 min later my Prusa Mk3s saved the day! How to use it: Undo the hot end when cold, you don't want the fan running as it can touch…

Downloads
2,158
Likes
516
Rating
4.98
P
PrintablesMc Theias

Pill Crusher

This product is to crush pills to make pills easier to consume. With a simple twist, the pill is turned into a fine powder that can be mixed in soup/food. Print instructions no need for brim or raft printed in 0.2mm but you can increase…

Downloads
2,060
Likes
172
Rating
4.65
P
Printablesbagel

Minimalist toothpaste squeezer / paste pusher

Ultra minimalist toothpaste squeezer design that's plenty strong! Works great for other things like facewash, lotion, etc. Measure the width of your tube at the end to make sure you choose the right size (there are 4 to choose from…

Downloads
1,960
Likes
176
Rating
4.86
P
PrintablesBalu

Multiboard Flush Snap Pusher

Since the new Flush Snaps are a little flimsy, it can be difficult to push them into their Multiboard counter parts - especially if you chose the tighter versions. So I made this little tool to help with that. Print settings I print these…

Downloads
1,609
Likes
152
Rating
5
P
Printablesbagel

Totoro toothpaste squeezer / paste pusher

This is a simple Totoro-themed toothpaste squeezer. The opening is 60.62mm wide. The model is 117mm wide, 70mm tall, and 4.5mm deep. Add a couple extra walls to print the design faster (and for added rigidity). This is based the opening…

Downloads
1,399
Likes
181
Rating
4.83
P
Printablesthrutheframe

Bambu Lab X1C Clog Pusher Remix

I like the design of Bounet's clog pusher. I wanted to include a ptfe tube within to help guide the filament when doing a cold pull to clear out the clog. I designed 2 versions to have the 2 screws secured by either nuts or brass inserts.…

Downloads
1,165
Likes
350
Rating
4.78
P
PrintablesGenericGeek

Servo Nozzle Brusher (Voron V0.1)

This is a Nozzle Brusher I designed for my Voron V0.1. Say goodbye to cleaning your nozzle manually. This device will automatically clean the nozzle upon starting a print, or at any point using a macro. A guide for installation on the…

Downloads
1,058
Likes
183
Rating
5
P
PrintablesScotty7642

X-Shot Crusher PIP Dart Belt x6

A string of six Nerf X-shot crusher shell casings for nerf dart ammo belt. Fully integrated with original nerf belt. All six darts can be printed in place, just sacrificing a little cross sectional area that is more for aesthetics than it…

Downloads
991
Likes
87
Rating
5
P
PrintablesLukasz Filipski

Aluminium Tent Stake Pusher/Handle

This is a simple solution to issues associated with trying to push small aluminium tent stakes into the ground - and getting your palms cut due to small surface area of the stake, or deforming them if using a hammer. This simple tool…

Downloads
825
Likes
90
Rating
5
P
PrintablesMrSaiclops

Can Crusher - 12oz/16oz

The changes to the original are as follows: Scaled the plunger to 99% on the X and Y axis This was recommended by the original uploader, I've just done it so you don't have to. Scaled both the plunger and the body to 110.37% on the Z axis…

Downloads
799
Likes
87
Rating
4.78
P
PrintablesAravind

Skullcandy Crusher Wireless Hinge - Fully fold-able

The parts can replace the hinges of the Skullcandy Crusher wireless headset, which gets broken very easily. The parts are designed to be printed without any support on any FDM printers.

Downloads
786
Likes
34
Rating
5
P
PrintablesJori

Universal "Button pusher" SG90, MG996R

... this is the perfect digital to analog interface for mechanical engineers! Consists of a "button pusher arm" and a bracket to hold down the servo. I used two of these to automate my coffee maker: first servo pushes power button, a…

Downloads
761
Likes
59
Rating
5
P
PrintablesMatt

Pill Crusher

A simple twist pill crusher. This was made to crush pills for a dog that was fussy with taking tablets so hopefully it can help you too. I have not tested printing this in PLA although the M60 threads was made with added clearance. The…

Downloads
725
Likes
72
Rating
5

The Pusher

When downloading, do not forget that you do not need to click Download All, because in this case you will get a 404 error, because the site is broken and no one is going to fix it. Download files one at a time by clicking Download each…

Downloads
688
Likes
239
Rating
5
P
PrintablesForma3

Weed Grinder XXL Large herb crusher

2 colour grinder with palm tree print. Print with min 40% infill or higher. No need to print with support. You ned to have 10mmx10mm magnet and 10mm washer for the screw (thin).

Downloads
667
Likes
47
Rating
3
P
Printablessoulrider911

Sight pusher for Glock V2

This is a sight pusher for Glock Slides. This device will hold the slide in place and allow pushing the sights off a Glock Upper Slide. You will need the following hardware: 4x 5/16 Nuts 1x 5/16 3.75-4" Bolt 1x 5/16 1.25-1.5" Bolt…

Downloads
654
Likes
110
Rating
0
P
PrintablesAAME

PiXeL - Micro fpv drone racer frame - tiny whoop pusher style

I tried to design an indestructible frame taking advantage of Prusa XL multi material print capabilities. My configuration: LIPO: 2S 450mah FC: Flywoo GOKU F405 HD 1-2S ELR AIO V2 Motors: HGLRC SPECTRE 1202.5 Motore Brushless 11000KV…

Downloads
608
Likes
117
Rating
5
P
Printablesiggy

WC pusher plate - Geberit Sigma compatible | Drückerplatte

WC Pusher Plate (Drückerplatte), compatible to Geberit Sigma I accedentaly bought a Delta pusher and had to fit it to a Sigma backend. Instead of returning it and getting a fitting (and more expensive one) I made a Sigma-compatible pusher…

Downloads
599
Likes
38
Rating
5
P
Printablestothelaunchbay

Militech Crusher - Cyberpunk 2077 Gun

This is my attempt at the Miltech Crusher from Cyberpunk 2077. I referenced screenshots from CDPR and drawings/pics from Volpin Props. Those guys are awesome, check them out. Modeled in Fusion 360 There is a text file with the bill of…

Downloads
578
Likes
148
Rating
0
P
PrintablesFlops

True Hybrid Dart Pusher for Nerf Stryfe

A printed Pusher so your Stryfe or other compatible Blaster can shoot Half- and Full lenght Darts. Print this flat agianst the Bed. A 0.2 layer height should be suffiecent. 2-3 Walls/Perimeters and 10-20% Infill. I printed mine out of PC…

Downloads
560
Likes
71
Rating
4.67
P
PrintablesRene76

RC Dutch pusher boat "Opduwer"

This is my new project: a pusher boat, or a Dutch "opduwer" from 1927. "Opduwers" come in various shapes and sizes. https://nl.wikipedia.org/wiki/Opduwer The pusher is on a scale of 1:10 and is approximately 60cm long. The design isn't…

Downloads
541
Likes
76
Rating
5
P
PrintablesRobertoooo

Creality CFS Roller Bumper / Pusher / Tensioner / Adapter for better spool stability

This add-on improves the filament retraction of the spool in Creality CFS, by eliminating the friction between the factory bumpers and the spool, which can become problematic as spools get lighter with less filament on them. Also no more…

Downloads
537
Likes
131
Rating
5
P
PrintablesFloatingBoater

Rada Push-button shower button-pusher

This design is a clip that fits over a rada mechanical shower timed valve and keeps the water flowing without having to keep pressing the button. The cap fits over the button, press, and turn to lock onto the water pipes. Simple,…

Downloads
525
Likes
24
Rating
4
P
PrintablesMatschi

Toothless Pastepusher

This is a Remix of the great "Paste Pusher Animals" by makeplace and my own "Toothless-cookie-cutter" It was kinda requested by marianok . Thanks for the inspiration ;) Use the "smaller" Version. It fits 4cm wide tubes Let me know if…

Downloads
474
Likes
63
Rating
4.75
P
Printablesgargunkle

Shirdal P4 Nerf Gryphon Remix -> normal geared pusher

If you're interested in a prebuilt or custom blaster build, please check GryphonsAndMore on Etsy! This is sort of hard to explain. The Gryphon is a “nerf” style foam blaster by Flygonial. There is a remix called Shirdal P4 by Skwiggums.…

Downloads
438
Likes
86
Rating
4.8
P
PrintablesSirPrintsALot

SwitchBot Bot Button Pusher Reference Model

Used this model as a reference when making a case to hold my SwitchBot button pusher like this one: https://www.printables.com/model/681036-switchbot-button-pusher-case-for-liftmaster-811lm-

Downloads
436
Likes
43
Rating
0
P
PrintablesFrank Wiebenga

Button Pusher for Maslow 4 CNC

This 3D printable Button Pusher can be inserted into the base of the Maslow4 in the half-moon shaped gap. It will hold down the button on the router so that you can change the bit.

Downloads
436
Likes
19
Rating
5
P
PrintablesTema 305

Frankenstein Mechanical Can Crusher – 3D Printable Aluminum

The model combines a functional mechanical design with a fun Frankenstein/Halloween appearance, making it suitable for makers, workshops, garages and Halloween projects. 🖨 Features 🧟 Frankenstein-inspired monster design 🥫 Designed for…

Downloads
421
Likes
234
Rating
0
P
PrintablesNormakeR

Sturdy can crusher

I have used Thingiverse Shuflie's design to crash several cans, but preferred to go for something more sturdy building upon his model. No artistic elements, just functional. Redesigned based on the original STLs in Fusion 360. Sharing…

Downloads
418
Likes
42
Rating
5
P
Printablespat

boilie crusher

the boilie crusher is intended to grind boilies

Downloads
388
Likes
24
Rating
5
P
PrintablesStantaun

Y and V Tent Stake Pusher

A tent stake pusher that was inspired by the Aluminium Tent Stake Pusher/Handle; I re-designed the piece to be compatible with both 90 degree V style tent stakes as well as the groundhog style Y stakes as I like the freedom to use both…

Downloads
382
Likes
29
Rating
5
P
Printables3dgeprintnl

Angry Tooth – Cavity Crusher

Meet the angriest molar in town! With clenched fists, a furious frown, and even a cavity battle scar, this tough little tooth is ready to fight plaque and cavities. Perfect as a funny desk buddy, dentist’s office decoration, or just a…

Downloads
378
Likes
51
Rating
5
P
PrintablesMarcusInCo

WS2811 MegaTree Strip Pixel Pusher Block

I got tired of the sore hands, so made a quick block to allow me to push ws2811 pixels into megatree strips. I added support under where you push in the pixel which made it a good bit easier to push. Uses ¼-20 countersunk screws to attach…

Downloads
367
Likes
34
Rating
0

Star Trek: Picard Jack Crusher's Phaser (remix)

On Artstation there's a solid Jack Crusher phaser model by Nick T that I remixed to split up for printing in parts. Update August 23 2025 - The original model size seemed a little too big, so I scaled it down to 92%. The new size feels…

Downloads
358
Likes
114
Rating
5
P
PrintablesIrgendeintyp

Skullcandy Crusher Wireless hinge fix

A replacement for the hinge of Skullcandy Crusher Wireless headphones. THIS IS NOT A MOVING HINGE!!! This is a rigid replacement that will be easier to print.

Downloads
354
Likes
14
Rating
0
P
PrintablesMichael

Glock Sight Pusher Installation Tool for Suppressor Height Irons (fits Glock)

After printing out another sight pusher I decided I wanted to make a version that was smaller and quicker to print with a captured pusher. I also wanted to use more common hardware and I wanted it to accommodate supressor height sights up…

Downloads
343
Likes
75
Rating
3.5
P
PrintablesNormakeR

Sturdy can crusher v2

This is an updated version of the Sturdy can crusher based on feedback in comments and my own user experience. What is new: Made it taller to allow crushing of sleek cans Added chamfers to holes, bottom and top to avoid cutting edges Got…

Downloads
341
Likes
70
Rating
5
P
PrintablesMachineboyzach

Skinny(er) Pusher for Brassless Smiley

While Silly's alternate pusher does clear nightingale magazines as advertised, its a little tight compared to the original. I spliced on the sealing version of Silly's pusher to the body of the original design to let magazines drop…

Downloads
339
Likes
42
Rating
5
P
PrintablesSkeleton Dan

Giant Crusher from Elden Ring

Giant Crusher from Elden Ring

Downloads
337
Likes
43
Rating
0
P
Printablesknoopx

65mm Pusher Tiny Whoop Frame

Mobula6 / Meteor65 compatible frame. Print in PLA, PETG might work but found mine to flex too much. Print slow, will make it stronger. After printing break the supports under the ducts and FC mounts. You might need to re-drill holes on…

Downloads
317
Likes
26
Rating
0
P
PrintablesNixqy

Glock Sight Pusher - Suppressor Height Sights

I beefed up the frame by using 5 perimeter walls and adding a second spot to hold the slide on both sides. The pusher was redesigned to fit suppressor height sights. I added a hole in the wrench so it stays captured to the tool and a…

Downloads
309
Likes
58
Rating
4.5
P
PrintablesVoltaicJ

DI Resin Funnel and Packer/ Pusher

Funnel to fill your DI canisters with a packing/ pusher to help get the Resin packed tight

Downloads
305
Likes
23
Rating
3
P
PrintablesTimur Kasumov

Grape crusher for wine making (remix with handle)

This is a remix of https://www.thingiverse.com/thing:4654240 but with 3d-printed handle. Other parts are same as original This device helps to crush grapes in the production of home-made wine. Supplementary material: stainless steel bolt…

Downloads
300
Likes
42
Rating
5
P
Printables3DBob

Sewing Fabric Pusher

Easy print tool to add to your sewing toolbox. Print with 3 perimeters for strength. The point can have an issue with warpage, so best to add a brim. Thanks @Tiffi226! I hope you like ❤ my model and will post your makes! Happy printing!

Downloads
298
Likes
101
Rating
5
P
PrintablesFoppemoa

Pill Crusher

I liked the formfactor of the original, but wanted to make some changes to the design. So I remade it from scratch to change some angles, make softer edges, make the pestle solid etc. I use it to crush some shrimp food into smaller pieces…

Downloads
290
Likes
27
Rating
5
P
PrintablesRDP

Grippy Pill Crusher

Modified @Matt3D's excellent design with a longer, knurled exterior for better grip. Print suggestions: Note that this remix, like the original, prints very large . Maybe larger than you want. I've found that printing at 50% is plenty…

Downloads
288
Likes
21
Rating
5
P
PrintablesAMSPawn06

Nerf Pinpoint Pusher kit

4 walls, 15% infill should work, the pusher does need supports, and you will need a small o-ring to go on the pusher head. the pusher goes in place of the standard breech, but the barrel assemblies have different assemblies as follows;…

Downloads
264
Likes
40
Rating
5
P
PrintablesSecond
18+

The source marked this model as adult content.

Downloads
261
Likes
33
Rating
5

Plastic crusher - Pellet extruder for MK3S

Plastic Crusher - experimental pellet extruder designed for Original Prusa i3 MK3S 3D printer Author of the design: Silvestr Tkáč, Make3D Company Limited This prototype extruder is designed as a simple pellet extruder for the Original…

Downloads
259
Likes
71
Rating
4
P
Printablesrocketboy

Tent Stake Pusher with Lanyard Hole

Tent stake pusher compatible with MSR Groundhogs and Easton stakes. MrCitizen did all the work on this, but I wanted a way to attach it to my tent stake bag, so I added a hole. Printed with a little support for the center hole. I used PLA…

Downloads
255
Likes
13
Rating
5
P
Printablesricewong

Adventure Force Spectrum Half-Dart Pusher

Half-Dart pusher for the AF Spectrum. Currently requires trimming of the area that holds the kill switch when the jam door is opened to operate. (See picture with red circle) This is compatible only with the Half-Dart adapter from the…

Downloads
247
Likes
19
Rating
0
P
Printableshopefulyhuman

X-Shot Crusher Chain

Print your own chain for your x-shot crusher uses 1.75mm filament as a pin

Downloads
235
Likes
34
Rating
0
P
PrintablesMeister Edel

Lanyator : Spyderco Paramilitary 2 & 3 Lanyard pusher

Hey there, i like to modify or clean my Spyderco knifes but it is always annoying to remove the scales from the lanyard plug. So I designed this Lanyator to solve that problem. It works like a simple chain tool and ensures an efficient…

Downloads
232
Likes
43
Rating
0
P
PrintablesRavenMac

One-handed DualSense Button Pushers with Icons

I wasn't happy that the icons had to be printed out separately and adjusted so that they don't interfere with each other. So I took the icons, scaled them down 75%, and embedded them 2mm deep into the button pushers. I had to make the…

Downloads
230
Likes
11
Rating
0
P
PrintablesUğur Uyanıker

Cap for Flusher cutter

Cap for cutters. You can print it fast strength. Please like if you download the model.

Downloads
223
Likes
34
Rating
5
P
PrintablesDay

Skullcandy Crusher Evo Hinge

Hinge for Skullcandy Crusher Evo Headphones. Prints in two pieces to allow the user to not have to cut and resolder the headphone cable. Preforms just like the original except for it does not restrict the rotation of the earmuff since…

Downloads
221
Likes
8
Rating
0
P

The PEX Pusher

Running PEX pipe in tight spaces and during remodeling jobs can be a challenge, especially when faced with obstacles, restricted spaces, and pesky insulation. Introducing The PEX Pusher , the tool you didn't know you needed that makes…

Downloads
210
Likes
99
Rating
0
P

Dart Zone Pro MK3 Anti-Jam Pusher

Replacement Dart Pusher for the Dart Zone MK3 flywheel blaster. Designed to correct problems with Jamming, and Double-Feeding. in stock form on release**, the MK3 has problems with jamming when using Talon magazines as well as problems…

Downloads
209
Likes
30
Rating
5
P
Printablesdagmandt

Drill Press Pixel Pusher

This is my solution for blistered fingers after pushing a thousand pixels by hand and with pliers. There are a few similar solutions on thingiverse and I took inspiration from all of them and set out to design my own to optimize it for my…

Downloads
208
Likes
15
Rating
5
P
Printablessquinn

Ice Scraper and Crusher

An ice scraper tool, with a strong ergonomic handle, and teeth for crushing the tough ice on one end and a traditional scraper blade on the other end. This is an easy print (smaller layer heights will create a smoother handle), and no…

Downloads
208
Likes
64
Rating
5
P
Printablesmoranski

Sight Pusher for Glock Pistol

I tried to use other available tools but encountered some problems, especially during the installation of the new sights (the frame was too flimsy, and the pusher didn't allow the installation of new sights). The tool has strong walls,…

Downloads
202
Likes
33
Rating
0
P
PrintablesFrogProjects

Hybrid Pusher For Nerf Stryfe

A hybrid pusher to fire both half-length darts and full lengths from the same blaster! All other designs i found or bought either were too unreliable or weren't compatible with the OFP anti-jam lid. Credit to Jackskidding for the pusher…

Downloads
197
Likes
36
Rating
0
P
PrintablesBlueprint 3D

Arcade Coin Pusher game

The Table Top arcade style coin pusher, Perfect for fun at home for all members of the family! I made this as a gift for a family, All the major components are laser cut with only a few screws and a single switch and small DC motor…

Downloads
197
Likes
26
Rating
0
P
PrintablesAkardia

Pixel Pusher

Should be printed in default orientation. 4 perimeters, at least 5 top layers, 35% gyroid infill recommended as the pusher will see lots of force depending on the props clearance.

Downloads
197
Likes
12
Rating
0
P
PrintablesVirtuallyJason

Frosthaven Lurker Clawcrusher

Here's my proxy for the Frosthaven monster, the Lurker Clawcrusher! This guy's on the big side, so you may want to scale him down to 80% or so so that he doesn't overhang the base so much, but I decided to make him bigger so that the…

Downloads
193
Likes
14
Rating
0
P
PrintablesGemeneye

Nerf Pro Torrent Skinny Dart Pusher/Breech

Hello everyone! This is a 3D printed replacement dart pusher/breech for the Nerf Pro Torrent that allows for magazine swapping without needing to prime the blaster. While you can load and unload a magazine in a stock Torrent without…

Downloads
188
Likes
46
Rating
5
P
PrintablesCailess Arouræ

X-Shot Longshot Pusher

UPDATED FILES Did you let a coworker try out your Longshot, and did he subsequently break the pusher while somehow full sending a double feed so bad it required a full disassembly of your blaster? Cause I did, and thats why I designed…

Downloads
186
Likes
36
Rating
5
P
PrintablesCrazyCote

MOLLE, PLCE pusher tool

Molle/PLCE pusher tool for easy mount molle pouches/equipment on hard material like thick cordura etc. i like to print this model non planar ,but normal print works as well.

Downloads
183
Likes
40
Rating
5
P
PrintablesEccentriclulz

Stryfe Dart Guide Compatible Short Dart Pusher

Modified pusher to clear flywheel cages with dart guides. Used in conjunction with Talon compatible cages by ahalekelly ( https://www.thingiverse.com/thing:2843287 ) Feeds perfectly using Worker Talon Adapters designed for flywheel…

Downloads
182
Likes
34
Rating
0

Nerf Rival 130 to 260 Pusher Motor Housing

If you have a Nerf Rival belt pusher motor die, it is likely a 260 series motor with no readily available replacements. I designed a housing to use a 130 sized motor as a replacement. It has increased venting around the motor to allow…

Downloads
177
Likes
30
Rating
0
P
PrintablesTeeDeeBee

xTool D1 (Pro) Cable Pusher

Prevents the laser cable and optional Air Assist hose from rubbing against the top of your enclosure if you use the xTool risers (or my designed honeycomb centers & risers). Or just to keep them out of the way… Perfect and tested fit on…

Downloads
172
Likes
28
Rating
0
P
PrintablesLukas Wass

Tent Peg Pusher - Self Centering

You should avoid pushing tent pegs into the ground with your foot as you might bend or even break them. This tool is made to save your palm! The tool has an inner chamfer that makes it self-centering around the tent peg, independent of…

Downloads
170
Likes
26
Rating
5
P
Printableswoelpi

Lamello P-System dowel pusher

You'll need M3x10 screws or something similar. I used some screws for plastic that are 3.1x10. Both pieces are printed in PETG and glued together. I used a 0.6mm nozzle and around 5-6 perimeters with a 50% infill.

Downloads
166
Likes
27
Rating
5
P
PrintablesJambatic

X-Shot Longshot Pusher Reinforcement

Simple yet highly effective! This reinforcement prevents your X-Shot Longshot Pusher from breaking. Did your pusher already snap? Print, push, glue, and you're back in action. If it's still intact, print and install this reinforcement for…

Downloads
165
Likes
28
Rating
0
P
PrintablesHellBz3D

CFS Spool Spring Pusher - EasyPrint-Remix

This is a simple Remix of the Original-Parts, to not Print Parts in Mid-Air and even make the part with only 45Degree Edges All Other Parts can be used from the Original Part-List-Needed for 1 CFS: 32x 693ZZ Bearings ( 8 for each Pusher )…

Downloads
161
Likes
33
Rating
0
P
PrintablesChadwickTheCrab

Food Pusher for KitchenAid Grater

I dropped the food Pusher one time on a tile floor and it cracked. I couldn't find a design so I made this in Fusion 360. I printed mine with 5 walls with a 0.6mm nozzle which was almost 100% solid. Printed without supports.

Downloads
155
Likes
21
Rating
5
P
PrintablesMatthew Wegmann

Ice Crusher - Ice Scraper

The scraper is equipped with a blade that clears frost on one end and a separate ice chipper on the other end that improves ice removal capability. 4 Walls 40% Infill

Downloads
155
Likes
23
Rating
0
P
PrintablesJaegermeister

Headphone stand for Skull Candy Crusher

I made this for my Skull Candy Headphones. I printed the logo in white PLA and glued them with superglue. Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: Yes Infill: 15 Filament: . PLA Category: Audio

Downloads
153
Likes
28
Rating
5
P
PrintablesaTm_wRECr

Honeycomb wall insert pusher/remover

I made a tool to aid in pushing out the inserts of a honeycomb wall system by RostaP . One end has a pilot for hollow inserts. The center is a ¼" hex for using a screwdriver bit handle with a long bit to add comfort to push. I didn't have…

Downloads
147
Likes
26
Rating
0
P
PrintablesB1g choppa

Xshot Fury X pusher fix

Had some problems with the pusher catching on the back of the darts in the mag and damaging them, so I did this. Works really well from what I see. The instalisation instructions are shown on the photos. be careful not to remove too much…

Downloads
146
Likes
31
Rating
5
P
PrintablesGajowy

Prusa MK4S pusher

This is 3-part model of pusher design for Prusa MK4S to clip on the bracket from Fan. With proper g-code you can eject your prints from front part of the bed after cooling down. This is the simplest solution for automatic printing with…

Downloads
145
Likes
88
Rating
4.5
P
PrintablesLauren Geist

6.5mm Needle Pushers

This is made with the Silver Reed LK150 in mind. The gauge is set to 6.5mm. Feel free to print them all or just the specific ones you need!

Downloads
140
Likes
16
Rating
0
P
Printablesdturak

Festool - Table saw pusher

Table Saw Pusher 🪚 A simple and practical 3D printable push stick for table saws , designed to help guide material through the saw while keeping your hands farther away from the cutting area. The wide handle provides a comfortable and…

Downloads
140
Likes
24
Rating
0
P
PrintablesBazing89

Stryfe auto pusher

3d printable stryfe full auto kit just need a cheap geared motor enjoy. Category: Hobby

Downloads
140
Likes
27
Rating
5
P
PrintablesRazelak

Skullcandy Crusher Evo headphone replacement arms

This is a simple replacement arm i built for my wireless Skullcandy Crusher Evo headphones. the mod is very easy to install, just pop the old arms out with a screwdriver and the new ones should fit in just fine, it goes in the same way…

Downloads
138
Likes
15
Rating
0
P
PrintablesNotGabe

Half dart stryfe pusher that actually looks nice

I wanted to convert my stryfe to half darts, but couldn't find a pusher that I liked, so I made my own! Some notes: Not compatible with unmodified daybreak cages, since their dart guide interferes with extended pushers. You can fix that…

Downloads
132
Likes
12
Rating
0
P
PrintablesRotaryFever

Tall sight pusher for Glocks

Modification to spiggytech's pusher tool to install taller sights.

Downloads
132
Likes
14
Rating
5
P
PrintablesHenry

Aluminum Can Crusher with Storable Ejector Pin

I created an ejector pin to fit snugly within ColgS3b's can crusher sleeve, matching the base diameter perfectly. I also modified the crushing piston to nest the ejector pin inside, allowing all three components to be stored together,…

Downloads
132
Likes
8
Rating
0
P
Printablesdr.dentz

Door handle and button pusher with housing

During the current Corona epidemy I wanted to share my model that I have been creating to minimize contact to surfaces that are touched by many people. The design is inspired by a lot of other models I saw online. However not many had a…

Downloads
131
Likes
2
Rating
0
P
PrintablesSalut

Triggerpunkte Drücker Triggerpoint Pusher

Dies ist ein Modell für einen sogenannten Triggerpunkte Drücker. Es dient dazu gezielt Triggerpunkte, Muskeln und Faszien zu massieren. Der Drücker kann aus nahezu jedem Material gedruckt werden, es ist lediglich ein Infill >20% zu…

Downloads
131
Likes
18
Rating
5
P
PrintablesTilan2000

Bambu Lab Clog Pusher for Hotend - Brass inserts M3x4

This is a remix of the Bambu Lab X1C Clog Pusher Remix with PTFE tube. I reduzed the holes for the brass inserts to 4 mm to make them fit for the Ruthex M3x4 brass inserts I have laying around. I enlarged also the length of the hole to 5…

Downloads
130
Likes
37
Rating
5