Counting matching models…
I wanted to remove the radius overhangs on the print but realised the original STEP files were exports of the STL so I've exported clean STEP files as well as made my minor tweaks. Thread was changed to GL20 thread to hopefully improve…
Print approx. €4.16–€5.08 excl. taxPreliminary estimate for one variant
I worked for TweakTown.com previously and was requested to design a 24x Thumb drive organizer for one of the reviewers. Here it is! I have a second version of this holder that has been updated and does not include the logo. You can find…
Print approx. €5.53–€6.76 excl. taxPreliminary estimate for one variant
I really like the original cat key hook design by a-arruti , but I had trouble getting the lever to print right, and be strong enough to use. I looked through comments, and saw others were having the same trouble. I want to put several of…
Please refer to https://www.printables.com/model/581649-elegoo-neptune-44pro-cable-chain and https://www.printables.com/model/596277-elegoo-neptune-44pro-cable-chain-new-90deg-mount-z/files for the full set of files you need to print for…
Gridfinity Tweaked Licence Creative Commons with Attribution 4.0 See: https://creativecommons.org/licenses/by/4.0/ Full text in LICENSE file included. Author: Tim Watts <[email protected]> Copyright: 2023 Source code: Gitlab This aims…
Fixed solid holes on mount Please refer to https://www.printables.com/model/631300-tweaked-cable-chain-mounts-for-elegoo-neptune-4 for additonal parts. I only created to fix the missing holes on the mount.
Tweaked Version :-) smaller only 1.1g instead of 1.6g less air restriction fast print → 8min. V2 more tweaked :-) geometry tuned for more airflow only 0.9g Original Text Model & Text from Daarin: Fan duct for the Nextruder hotend fan. I…
I took the model from @PhysicsDude and made a few sizing modifications to have it be snug on my camera
Nothing ground-breaking here. I re-did the hole in the stump as a matter of personal preference, to a single cylinder. I also sliced the bottom a bit to get a flatter look. Base object from Anders644PI :…
I really enjoyed the original model by Severeon , and I wanted to print it for a friend. However, I found it a little difficult to assemble without my tools (I'm just not sure what tools this friend has available to them), and I didn't…
Remixed geometry from ttoadd's spool extender, credits to them: https://www.printables.com/model/338553-bambu-x1x1c-spool-extender Extends the spool holder out to allow for the AMS to stay plugged in while you use it. Can be used in…
Adapted from this model on GrabCAD : https://grabcad.com/library/alps-fader-knob-leever-4x1-2mm-1 Modified to allow for easier 3d printing by removing some useless void space and adding a small tolerance to allow it to actually fit to the…
Very cool original design. My son wanted it to open and close fluidly so I needed to mod a bit. I widened the handles to allow for more clearance between the knife and the frame (0.4mm per side). Added a hole to put bolts in for weight…
Minor remix to add a slot so you can see the board LEDs. Also, opened up the lid around the USB connectors since the original was too tight for my Raspberry Pi 3. V3 - added a hole to the card slot to make it easier to get the SD card out…
As soon as I saw Rocco's model I knew I had to build it. Although I wanted the front face to sit flush with the box, and to hide the 4 front facing mounting screws. This mounts using M4x6x6mm inserts and M4x6mm screws. N.B. this design…
Love the original model and find the Strand Beest mechanism endlessly facinating! :) This upload contains a leg model that is modified to allow the print in place joints to break a little easier. I found that my clumsy hands failed to…
A recreation of the old-timey tools for technicians working on radios and TVs. Has a flat-head on one side and 0.1" hex on the other. Other variants are possible. UPDATE Sept 2026: I've uploaded a version with a longer hex end as…
This is a great model by @RoccosStuff. In some of his earlier models he used the spare metal pins for the lock bolts but chose to use 3d printed pins on this. I think the metal pins looks better and it is easier to print the rack that way…
Just a wider version of the ultimate filament clamp by jajaum3d . The original works great though did not fit some of my spools (2&4 kg) Not just a resize as that would mess up the threads.
Mod of the TradRack Binky selector to have both a gate switch and an encoder
This is basically the exact same model as Propaganda 's Deburring Gridfinity module , but tweaked to hold my generic hobby knifes which have thinner handles (8mm) vs the original model which has more of a 12mm hole. Note, this was such a…
Parametric honeycomb inserts for the Prusacaster (and the knob holder portion from the BexGears remix by MrJamin). Modify the parameters of the inserts to achieve your desired thickness and/or to suit your printer's tolerance! I also…
This design is brilliant, but I was having some issues with the fit in my particular caliper. Changes made: Switch part made thicker (to help prevent it from getting lodged between the plastic body of the caliper and the circuit board)…
My daughter wanted a star to put on top of her small Christmas tree. I went to print the original I found on here in Cura but it came up solid rather than hollow. I flattened out the bottom, rotated it up to be standing up, and hollowed…
Ironing information: If you chose to do ironing, I'd strongly suggest NOT doing the default of “ All top surfaces” for the body portion and specify “ Topmost surface only ” The reason for this is you might experience a…
Change log: - tighter fit - smaller connector tolerance - 250 mm high - hollow middle module - hollow top module
My version of a tweak stick for Awesomatix A800MMX the parts fit on a rod with 10 mm outer diameter I had some aluminum tubes with 10 mm outer and 8.2 mm inner diameter lying around simple version: use o-rings to hold the printed blocks…
YOU MUST SWAP SOME WIRES FOR THIS TO WORK!!!! THIS FILE USES A CUSTOM FONT: HELVETICA NEUE (similar to prusa font) Install it before opening FILE!! THE MODEL WILL WORK IF YOU CHOOSE TO KEEP THE SPRINGS IN THE SENSORS AND NOT ADD MAGNETS I…
Gridfinity E3D Revo nozzle holder (4x nozzles) in a 1x2x3 stackable format. Remixed from oooohan's elegant model to improve ease of retrievability. Otherwise identical. Shout out to them for uploading the CAD model. Class.
Sleeves used: Dragon Shield Clear Matte Lowered player token tray walls so sleeved action cards would inset better Added 3 new “envelope” sleeves for the non-deck cards See @ Eerko 's make for the rest of the components. I didn't like…
I'm not big on printable hardware - there's nothing wrong with it, but I've got a tonne of hardware so I might as well use it. For the main body, you will need: 14x - M4x6 heat-set inserts 8x - M4x20 bolts 6x - M4x30 bolts (you can get…
I liked the idea of LoboCNC tape slitting tool though not as enthused with the elastic and nut jamming. So I added a inset for a 10mmx 3 mm magnet (to replace the elastic for return) as well as a 5mm thread for a 50mm screw (no nut…
After “upgrading” the KP3S PRO printer with Y axis with linear rails, I found that the previous screw was short and the screw delivered did not work with the spring. This print will enable the original screw to function. There is a 0,2 mm…
Needed a desk holder/stand for my HoldPeak HP-990 tweezer multimeter when using plugged external wires and came across this lovely model. Maybe someone out there who has the same multimeter will find it useful as well as the other new…
Prints without supports. I ordered the following acrylic panels for mine, the model can accept up to 4mm deep panels, but I went with 3mm as it was more readily available: Dark tinted 3mm panels from cutmy.co.uk for approx £25 delivered -…
This is a minor tweak of the LED clip which works nice. I turned up the tips of the baffles, which seems minor but as you can see from the cover photo the tips are now dark when viewed from the front. To digress, the genius of…
I tweaked the "interface" diameters as they did not connect very well.
Love the original by De jennes (5374) his insert parts fit perfectly (just added a back colour and a opening for a 4mmx2mm magnet.I used ironing which does look betr thought the inserts are quite tight but do fit.
This is a tweaked version of this excellent model by @Wilko I'm super appreciative that Wilko provided the Fusion 360 file. This allowed me to quickly and easily modify it. Extra points for using parameter formulas, this made modification…
UPDATE: Considering the comment provided below, I decided to redesign a bit to increase clearance between the extruder and the spool holder. The new version can be found here: https://www.thingiverse.com/thing:2904072 or here:…
UPDATE 07/18/19: STEP files added for v7 model. UPDATE 06/12/19: Design has been updated to v7. v7 has a 10 degree up-tilt compared to v6 and reflects the angle from the original designs I remixed from. Updated in response to feedback…
I have not been particularly happy with the Zimaboard mounting options out there until finding @MartinRowan's excellent modular 1U system . This remix was done to suit my specific needs, but I feel that some may be of use & worth sharing.…
>>>>NOTE: I will still consider it a work in progress, since my top plate has some gaps on the side, but im not yet sure if its the modell itself or tollereance issues while printing, but i wanted to share the modell anyways since im not…
This is a quick update of the original Simple Extruder Visualizer intended for 2mm diameter magnets. Love the original clean design, but I usually keep 2x8's on hand (for fridge magnets and such). You'll need to stack a few (3+) to reach…
In the beginning, I was getting frustrated with my inability to get the little clips printed without creating a bird's nest on the build plate. As a result, I made a few minor changes to the original design of the chain links so that I…
The Kingroon Z homing screw was too long and I could not screw it in enough to have good first layer. Replace Kingroon screw with any M4 ISO 4762 Socket head screw. M4x16 should be best but beware - it was quite a challenge to get it…
updated a little bit for better mounting and more flex. best lens cap on thingiverse in my oppinion for your size use (your lens diameter)/52 = multiplication factor ex: 58/52 = 1.11.5 multiply with 1.11 or 111% for 58mm Category: Camera
I remixed the original so as to lower the camera. It now points more towards the nozzle. The bracket moves less and still has the features I liked from the original design. It will pop off easily and it required no modification to the…
I've noticed a few tweaks that can make the jig more printable by removing weird overhangs and less thin walls that don't seem to affect the functionality but greatly increased the printability for me. Some of these could be because of my…
This is a remix of the raspberry pi3 case, originally designed by Joe and remixed by Wilts01 to enable bottom mount. Thanks to all original creators! Changes in remix: Remove the side mount, the side wall is flat again Added 4 bottom…
Replacement tokens for monster weaknesses from the “Monster Weakness and Special Attacks” module* for Witcher Old World board game. *This module was avaible in KS campain only, i think.
I encourage you to download this model and try to get it working. If you do upload it as a remix and give me credit. Thank you!
My ESR MagSafe charger didn't snap in to the hole so this one is tweaked slighted to allow it to be inserted snugly.
I took the original one and tweaked around the measurments in tinkercad and now it more snuggly fits because for me the original model was a little too loose. Also print in place with support and adhesion 15% infill worked fine for me
Slightly tweaked spacing on the clips
Some 2D wall art for my gym to make me put that little extra effort in when exercising. As always, I would love to see pictures of your prints.
First up, thanks to Domochevsky for releasing this blaster AND the step files! Secondly, the parts here use M3 heat set inserts (5mm OD, 3-3.5mm height). Don't use any smaller ones, they will fall out or not be strong enough. On to the…
I made two changes to darkcoffee's ball nut with M5 nut insert for Sneaks' articulating camera mount system : Lengthened the screw hole, so longer screws will fit Adjusted the nut hole pocket to print without supports I made these changes…
gridfinity 2x1 that fits large faced mitu and cheap Chinese DTIs/dial test indicators
This is a dust-cover for the Roland Aira Compact E-4 Voice tweaker. It is designed so that the cover can be on the tweaker while it is being used. Important to me, because the knobs are very easy to accidentally change, causing drastic…
This is a simple ergonomic bottle opener designed to help people with weak grip strength (seniors, arthritis, injured hands etc.). The outer lugs give you more leverage so tight caps become much easier to open. Just slide it over the cap,…
I really loved these organizers for the Harry Potter Hogwarts Battle Game and Expansions. I made a few tweaks
My personal Remix of the foostan's Corne V.4.1 case. A minimal yet quite effective case
Moded Base Lever for the SRT V9 Gearbox: Tweaks (see silver lever in picture): Re-modeled the switch nook so that it's easier to print and can easily mount the switch reversed to compensate for slack in the assembly Removed the cable loop…
Just a slightly tweaked version of the already good metric Drill depth stop by PMW0508 Made them a touch thicker to inset the numbering deeper with a colour change to make the number size easier to read. single size files as well as full…
I upgraded my Prusa MK3-MMU2 to MK3S-MMU2S But the new filament sensor was failing 4 times out of 5 ! This is a tweak of the idler tip that triggers the IR sensor. Still testing to check if it should be longer or shorter
This is a case that was designed to fit around the pcb that benvallack designed based on the ferris sweep. I wanted something that would protect any tabletop from the pins that stick through the bottom after the components are soldered…
UPDATED FILE HERE IF THE OUT OF ORDER NUMBERS DRIVE YOU NUTS! THIS FILE USES A CUSTOM FONT: HELVETICA NEUE (similar to prusa font) Install it before opening FILE!! Started with IBNobody's x6 block, used tg73's concept of hole placement,…
I designed this Trim Potentiometer adjustment tool for adjusting a variety of different trimpot models, and it should fit most trimpot barrels. This is the second version. There was nothing wrong with the first version , which is much…
This is a slightly tweaked version of Open Hardware Design's awesome IoT button . The design is great. Their instructions are awesome. So I am going to keep this brief. The original version was not very flexible in the size of PCBs it…
Tweaked version of the rail with a 1.5% scale up for a tighter fit and with small registration pegs on the bottom to help align and glue the rail to the side of the Apollo on the flat spot with the holes. Not a snap fit but the dimensions…
-added a mesh to holder -made an extra mesh for the other side or if you already printed the holder (just cut some mesh out to push your usb plug) -holes and nut traps now M6 because it is lighter and look more the right size .. if you…
I designed this Trim Potentiometer adjustment tool for adjusting a variety of different trimpot models, and it should fit most trimpot barrels. While there is nothing wrong with this model, there is a second version here that is a little…
Wanted to add slight improvements to an already awesome blaster. I have printed the original but had a few issues. Thankfully Chance offered the STEP files so I could easily help out and add these minor improvements. Let me know what you…
I tweaked my case after printing and added 8mm tall spacers (chopped up 7mm hot glue stick i had laying around that I found fit perfect.) to most of the bit slots to allow me to store my LTT bits in them at an appropriate height and also…
kids toy - dětská hračka
Don't download this - download the original at https://www.printables.com/model/502515-bear-upgrade-for-prusa-i3-mk4-mk35-mk39/comments This is here for communicating with the original creator about tweaks to his design.
These 2 files will fix the annoying weakness of the design by JHB Articulated Bender for the tight, shoulder and wobbly legs. https://www.printables.com/model/73094-articulated-bender The Joint, which I have use for the between of each…
The comments in http://www.thingiverse.com/thing:106568 mention a few problems with that version, and I had similar problems when I printed one, so I imported it into openscad (you'll need to download those original files to use the…
This is a few small adjustments to the excellent sculpt by Peter Farell, to help with printability and removing supports
I found 3 places from where vibration/noise comes from. -one is the Y axis stepper, which is very close to the bottom plate, and at certain frequencies it starts to make noise. The other two places are at the display. -there is a small…
Some small tweaks that make a great model awesome. Arms My phone kept falling out so I added bigger grabs. Sled My phone kept sliding off the front so I added hooks at the bottom. Clips I don't get why there was that fiddly extra part…
I just wanted to make a small change to the original one. round the edges a bit square of the front use an insert in the front angled plate with the sizes (you can print in a different colour for easier visualization Three types of text…
Hi, I created this slider, which is weaker than the original one.
1/28 Mini-Z size tweak station for micro RC cars, set up for 98mm wheelbase. The idea is given by a friend of mine and I just did it with Rhinos. Absolutely under development, all ideas and suggestions are welcome. Parts to complete it:…
Minor tweak of a great Thing! Now printed and installed - constantin33 this Thing rocks!!!! Thanks again Print Settings Rafts: No Supports: No Category: 3D Printer Parts
Just picked up Tiny Epic Western game, and glad to see tev's solution for storage. The bottom insert was too tight for my character cards, so I decided to make a little room. I also wanted to make it easier to pull out of the box, so…
Customized version of http://www.thingiverse.com/thing:46335 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=46335 Instructions Using the following options: Pencil_gap = 3 Sign_HEIGHT = 6 Sign_TYPE = 1…
Small tweak to the Connect 2 board stl's. No other parts included.
Remixed geometry from nansjes1, whom remixed the model from ttoadd's spool extender. I made a remix because this model would not work with the M3 x 30mm screws, so I removed 1.5mm in length from the model. (On the X1C it worked, but on…
This is a monolithic Priming handle for the Wildstyle. I've started designing it before knowing of the existence of the Shovel handle by Sillybutts, but since it keeps the smoothness of the priming rod unchanged and it's slightly smaller…
Just adapted it to my needs. Thanks to the creator of the original model.
Replaces the HUDY tweak wheels
Mod to fit slightly larger solder cleaner holders and to reduce the overall height back to 3U to reduce print time and filament use. The original was nearly 5U. About a 13mm reduction in unit height. The hole is just over 3% bigger (X&Y),…
DO NOT USE TOO WEAK USE OTHER MODEL ON PROFILE : https://www.printables.com/model/996472-s400-mini-itx-case-inspired-by-formd-vertical-stan This is a vertical stand for the S400. I could see a few for the S300 but decided I'd just make my…
Use 100% infill for best results. Use your normal 12th scale front end bearings. Make two.
Changed screw head holes to 6-6.5mm dia converted all new threaded holes to accept threaded inserts Increased clearance for flywheels Pusher mount has been tested and improves switch reliability greatly. Category: Toys & Games
This is a tweaked version of the excellent MK3 Nozzle RHD Rev. C by RH_Dreambox optimized for FDM slicing with PrusaSlicer/Slic3r. If you're using another slicer, and/or are able to print the shroud with another high-resolution technique…
Did you buy Möbelix GAP sunshade and realized, that it cannot be rotated over it's axle? Don't worry and print this tweak. Print with PETG or ABS/ASA (ASA=UV proof). Two STL available: 45 degrees and 36 degrees (on photo). Koupili jste si…
