2,540 models
A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away. This model is an easy print that requires no supports, and three…
Print in Place Stackable USB Cable Winder. Both smooth sided as well as knurled. Also include code for Color Change Print. Inspired by https://www.prusaprinters.org/prints/55627-cable-puck-print-in-place-cable-management Print…
Wind. Store. Go. Keep your charging cables neatly wound in a reusable organizer with a textured outer grip. Choose Large or Mini, with an open-bridge Mini option for larger connectors. Easy winding: a broad spool plate gives your fingers…
Updated Threaded Rod Model to remove extra shell which was causing slicing issues for some. New “v2” version will work with the original Nut but I added a v2 Nut just in case there is confusion. This is a remix of a remix of a remix. The…
Unstable fusion360 source file It seems like a recent F360 update broke the model file. Since it is not the first time, I'm in the process of ditching Fusion360 from my workflow altogether. I'm learning FreeCAD and will attempt a redesign…
Version Two of my reimagined spool winder. Les Kaye's model is really nice, but as I mentioned in my previous remix I ran into several issues (some mechanical and some cosmetic) that I felt could be improved, hence my Reimagined Spool…
Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…
A very useful tool, when you have to exchange strings on many guitars Nothing special about the print. Standard PLA, Standard Settings. Used Brim, but not sure if it's needed. Found at https://www.thingiverse.com/thing:2842644
Insert 10mm is for an 10mm drill chuck Insert 13mm for an 13mm drill chuck I recommend petg because it has very good layer adhesion. 3-4 perimeters should be enough. I took 20% infill and it works well. V2 now available the only change is…
Apple Watch Charger Case With Cord Winder. This is a Print in Place cord winding case for Apple Watch chargers. Two separate models to work with variations in Apple Watch Chargers. I have also added the gcode and 3mf files for the color…
Inspired by Everydecentnameistaken's cable puck from earlier today, I quickly threw together a similar puck that includes an easier to grip ... grip, and uses the one-layer-high slicer trick rectangles to print easily without supports. (…
RackStand option for RepBox and RepRack systems. Also compatible with RepWinder and now allows you to use with v2.3.1 and up RepBox with slip-rod system. Open source 3D printable, laser cuttable, or cnc files and original Fusion 360 files…
Compact pebble shaped traveling case for the Pixel Watch 2 charger, with cable winding feature and power adapter mount.
This Guy wire system for SOTA/POTA is a bit more than just rings for a Spiderbeam 7m mast: Its winders are also rope tensioners, like those used for tents. This makes trimming the wires easy and fast, exactly what you need on a windy…
When dealing with lots of spools and especially with refill filaments, sooner or later you will find yourself with a tangled spool which can only be saved by respooling the filament. So I was looking for a quick and easy solution to…
For when you want to wind your cables without sharp bends or risk of unrolling. This is a parametic model that let's you set cable diameter, desiered length to wind and the number of turns (to set the height). The particular one uploaded…
Tired of tangled measuring tapes? This winder fixes it once and for all — and it does it ridiculously smoothly . 🎯 WHY YOU’LL LOVE IT 🌀 One-finger rewind Thanks to the 608 bearing, it spins with almost zero resistance. 🧠 Smart flexible…
Updates since initial upload: Date Description 02/23/2023 Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the…
Adapter for connecting the 4.6 mm tube of the Gardena Microdrip system with any G3/4 thread, for instance a magnetic valve or the water faucet. Additionally, you will need a G3/4 sealing to make the connection water-tight. Please note…
I “remixed” the original extruder lever brace from https://www.thingiverse.com/thing:3935900 . Main reason was to be able to mount a ADXL345 sensor. I had to calibrate klipper3d with help of this sensor. You can just put the ADXL345…
This is a remake of the Universal Rewinder by https://www.thingiverse.com/VincentGroenhuis, https://www.thingiverse.com/thing:3338467 which was taken a step further by Blargedy https://www.thingiverse.com/thing:3867357 which gave me the…
Siehe auch dieses Modell Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden. Es ist kein Support zum Druck nötig. Bei dem Spanner darauf achten, wo der…
A string winder for my basses/guitars, 100% fill, printed with PETG and Prusa slicer. It can also be used with an electric screwdriver.
Für die Montage im Bereich Foto, Kamera, Befestigung von Zusatzteilen aller Art. Diese Käseplatte wurde für die Befestigung der Verkofferung für “Custom Blackmagic Atem” entwickelt.
Reduzierstück für eine Klimaanlage/Abluftschlauch von 150er Abluft auf 125er Flansch -kann aufgeschraubt werden -Meine Klimaanlage ist von COSTWAY ……gedruckt mit PLA im Quality Mode….. ……Organische Stützen…..
I needed a replacement cover for the motor drive connection thing on my Olympus OM-4 Ti. I couldn't find a 3D model for it online (even though they're being sold on eBay for 16€?!) so I made one myself. Printed with PLA @ 0.1mm. Buy:…
Features Quick, easy print No support required Parametric design Positive ratchet winding Design The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm –…
for English, see below Intro Mein Präsziser Filamentumspuler war ursprünglich für meine Prusameter Spulen gedacht. Mit diesen zusätzlichen Teilen könnt ihr auch andere Spulen mit ca 32 Windungen pro Lage und einem Minimal Innendruchmesser…
This Winder will ensure your string remain ready to serve. You can spool 2x30m without problem
Change strings on your ukulele faster and easier. Internal dimensions for the tuning peg are 9x19 mm - will fit most ukulele brands. Only 10 grams of filament. Designed as print in place, prints as 1 piece, no assembly needed. Just…
Aufbewahrungsbox für Ruthex Aufsätze zum Gewindeeinschmelzen M2-M8. Verschluß mit 4 Magnete Durchmesser 5mm x 1.7mm. Storage box for Ruthex attachments for thread melting M2-M8. Closure with 4 magnets diameter 5mm x 1.7mm.
Adam, K6ARK has designed an ultra-compact matching unit kit for portable Ham radio operation. One of his winder design ( https://www.thingiverse.com/thing:5385215 ) integrates a clip for a Male BNC connector. Seeing that, I designed an…
Print the complete kit, including the box, Hinge together with some filament. You can also just print the crank or the handle with a winding tool. Your choice as usual. NEW! Print-in-place Box
A weak spot of the original model is the window holding the spring end, whose borders may break if the spring is under high tension. In this remix I increased the wall thickness at these places by slightly reducing the window size. It…
The model is self-supported if printed in the orientation shown in the photos. After printing, drill the inner hole with a 3.5mm drill bit, then tap the hole with an m4 tapping tool. After that, remove the support and add an M4x16 hex…
Wallmount your repwinders. Two parts, long and short. Short takes one repwinder, long takes two. Combine for your number of repwinders. For a full MMU line up of five repwinders you need two long and one short cleat. Line up the parts…
Spacer and end cap for fillamentum spools for the repwinder Print instructions 0.2mm, 15%
*Currently only for 3mm diameter cable. Printed on Prusa MK4 0,4 mm nozzle 0,2 mm Quality Supports on bed enabled “Basic” - Two clips connected together “With End Holder” - Adds a small clip for easy access to the other end of your cable…
You can either print the Zwinder-Model and only replace the side-parts of the stand with my remixed version. Or you can use my pre-arranged 3mf and bcode files to print everything you need at once. Sheet 01 needs to be printed once per…
bofu roller shade motor winder used to open and close the chicken coop door using just a piece of wire. The motorshaft fits good, tight and snug. Just press it on and you wont need a screw to hold it. My first 3d model and first print…
These are 2 3D printed parts needed in order to use MatterHackers Build Series Spools with the Repkord Repwinder System. I modified them off the original STLs posted by Repkord. The spool connected to the winding core through the two…
Only base was changed to size of prusa mini bed. R2 and R3 from original model. Both file and Fusion 360 file can be downloaded from file page.
The other two eSun Repwinder spacers I found on Printables did not fit my eSun Masterspool, so I created my own. The eSun Masterspool requires a 6mm spacer, while normal eSun spools require a 16mm spacer. This model is parametric, so it…
ENGLISH (french below) Here is a custom-made winder designed for the IKEA SJÖSS 20W and 65W USB-C charger and LILLHULT or RUNDHULT cables (1.5m). I chose this charger and cable combination because they offer excellent value for money and…
Engish below Deutsch: Ich habe eine Desinfektionsmittelflasche auf der ich einem größeren Sprühkopf montiert habe, Mein original Gewindeadapter ist aber leider nach und nach gebrochen. Natürlich wäre es wahrscheinlich einfacher eine neue…
I am sure this can be even more refined but it works amazingly. It is a fishing gadget. The box version prints better but does well enough with the rounded edges. You put the line through the middle hole then tie it to the cork when you…
This is a very simple (and almost undoubtedly overbuilt) tool for aligning the geared springs included in many filament auto-rewind systems. The measurements and sizing for the tool were explicitly based on this model but are likely to…
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
UPDATE: ++ some Users had issues with the size of the 128 mm and 32mm axles therefore i upload 4 variants - small, medium, large, extra large. please choose which one fits better for you, depends on the calibration of your Printer. lots…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “All Gears and Axes” for an amazing project " Filament Spool Switcher & Winder " Design by…
This is a spool winder for transferring filament from one spool to another. Inspired by the need to use certain filament spools for the Bambu Lab AMS. This build should speed up the process and give a nice tight winding. There is room for…
Spool Winder Spool winder for filament and other spools with a maximum dimension of 210mm in diameter and 76mm wide. If the spool axle is inset then wider spools may be accommodated. Spools should be a minimum of 30mm wide with an axle…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! READ THIS MESSAGE BEFORE IMPLEMENTING THE PROJECT : I am writing this message because , one of the people is causing…
This is a remix of my PrintDry Pro spool adapter (which in turn was a remix of a Thingiverse design by Skrutt84: Ender 3 - Filament holder DELUXE). This winder will fit spools with center holes up to about 80mm diameter. Use with a…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Filament Guide Sled and Filament Guide” for an amazing project " Filament Spool Switcher & Winder "…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is “STAND” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY…
Based on the experience with my previous remixed Advanced Stackable Print-in-Place USB Cable Winder , I found out central winding not to be optimal when it comes to thicker cables, especially modern high-quality USB-C cables. Thus, here…
This is a redesign of the famous Print-in-place Stackable Cable Winder . The original design has a weak spot: The walls of the core are rather thin and tend to break easily. This redesign has a different core with thicker walls, better…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is “Motor Drive for Stand - Auto-Stop Function” for an amazing project " Filament Spool Switcher & Winder" Design…
Summary This is a 100% printable yarn winder designed to turn loose yarn or threads into clean, compact balls — easily, quickly, and reliably. Key Features Fully 3D printable — no screws, bearings, rubber bands or glue required Open guide…
This is a Remix “Winder Spool Frame 2 - Modular Design” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 BEFORE STARTING THE PROJECT, YOU SHOULD CALIBRATE THE PRINTER AND FILAMENT AND PRINT THE…
Hi guys, this is a remix of squinn's well designed Portable Cable Organizer / Winder, I thought there's a room to improve, specifically I improved the retraction of the cable where there is a foldable handle with which you can retract the…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Winder Spool Holder with Bearings - Modular Design” for an amazing project " Filament Spool Switcher…
This is a Remix “Spool Brake” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING ITEMS FROM THE LINK BELOW…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Donor Spool Holder with Bearings - Modular Design” for an amazing project " Filament Spool Switcher &…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024:] Added versions without the 2…
Stackable Cable/Cord Winder Organizer These stackable cable organizers let you wind up your phone and device cables easily for storage or portability. Coming in at multiple sizes depending on the cable thickness and length you have. Keep…
Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Newer upgrades are on my new upload…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Similar to GekoPrime's Clip for the other places. But this…
The original is amazing, I rebuilt it in CAD in preparation to organize my own box of cables. There are a few tweaks that I think are nice: Bigger clearances The hinge won't stick or break as easily Different latching mechanism More…
This is an upgrade for users of MMU and who has (un)original drybox (also works with the Slim version). This system replaces the filament buffers. It's a project in development that I try to improve with the time, thanks for your…
This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…
Wanting to use different sources for filament, often with cardboard spools (or refills) I decided early on that I needed a filament rewinder. Not fully satisfied with existing offerings, I made my own. I didn’t want to power it by hand or…
The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm – this should handle most tubes. Usage To assemble: Pass the toothpaste tube through the frame slot…
This is a super-easy 2-piece fabric tape wind-up device for 60", 90" and 120" flat fabric measuring tapes. I got tired of the mess and losing the rubber band that held mine together. Plus, I wanted something that I could wind up when I…
Update 2023-01-13: Addition of Hexa, Triangles, Circles, Plain patterns in addition to the original Voronoi Slight redesign of the overall assembly to limit the friction Other versions Regular charging cable : Same patterns, but for…
CAD file . The supplied models are separated based on meter width, in this case 19mm and 21mm, close to the most common widths, at least from what i could find, i had a 19mm. These values are the maximum meter width that will fit. If you…
A RepBox compatible or standalone rewinder system for Prusa MMU2 & REPLACE THE BUFFER BOX! ;) >> Non-Printable Hardware Kits Available Here >> Assembly Video Here UPDATED 2/5/22 RackStands for RepBox v2.3.1+ and RepRack are now AVAILABLE…
This is a remix of @IvoSlanina's great Rope Winder model. I took some material out of the centre so it prints faster, using 40% less filament. It's still very strong. I also increased the hole diameters from 4mm to 5.5mm because I…
Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…
Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…
Introducing a newly designed filament rewinder with virtually endless expansion possibilities . Main Features: Modular design for easy customization Sturdy and compact construction Minimal extra parts required: 7 × 608 bearings, 2 × 3 mm…
I created this remix because I have a lot of old spools that are relatively narrow (Wanhao maybe?) . Some are 48mm and some are 50mmm wide and I wanted to use the winder for them as well. While I was editing the parts I also modified the…
Please leave a comment if you have any possible improvements to make to these profiles 😉👍 Print speeds? Benchy : about 45 minutes Calibration cube : about 13 minutes How import profiles? In PrusaSlicer Here is the link on how to do it:…
https://www.printables.com/model/1453503-wool-winder-upgraded-parts ^Checkout this remix, it's an upgrade over this model. This design is a work in progress. SO: "I want to buy this wool winder and yarn swift, it'll help me kit better"…
Back in Black! For no other reason than because I have more bulk black than white this time. This is the second revision of my canter lever filament spool winder. You can find my first version here , along with the original description,…
I printed the spool winder by V3 Precision as had a couple spools that were not working well in the AMS. Although it worked and uses no fittings other than the screws to hold it down, it didn't respool as I expected. I had to touch the…
I have used this profile for big and small prints so its safe and tested you can see the result from this profile on my instagram page https://www.instagram.com/smotech3d/ ! The only think you need is to level your bed your correct and…
Simple and ergonomic fishing line winder in five versions. Since I am an avid angler, I could not help but make this device. You can choose one of the five winder options. Or print all options, as I did. Some winders are best suited for…
Spool winder with a hexagon spigot to fit a power drill
The Yarn Winder is a manually operated tool for creating center-pull yarn cakes from yarn hanks. It works best together with a yarn swift (not part of this model). The goal was to design a model that requires only a few additional,…
The original Pastamatic would sometimes jump the lead screw out. The author did a remix to incorporate a brace into the side rail. This is for anyone who printed the rail without the brace. It will use all existing mount points and…
EDIT: the shape of the outer prongs has been modified so that they dont bind when winding. Use 6 walls + 8 bottom/top layers. A simple drill-powered tool that quickly rolls up ratchet straps, making storage much faster and keeping your…
I couldn't find a nice bed template for the sidewinder x1. I hope you like it.
NOTE:2/1/23 Sorry took so long to get back to this. After a lot of testing I have come to the conclusion that a NEMA 23 stepper with an external driver is the way to go to get the torque needed to wind a full spool reliably. So, I am…
UPDATE 02/08/2023: Uploaded a V3 repaired frame file as there was an issue with the V2. The Spool Winder by Les Kaye is a great model, but there were a few things I wanted to do differently, so here we go. First, I redesigned the frame to…
When I was looking for mods for my artillery sidewinder x2 I had to look for them one by one, that's why I have made this compilation of all the mods that my artillery sidewinder x2 has. The vast majority of these designs are not mine, so…
I designed this paracord winder with added holes in the handle to attach to your backpack when hiking or camping, so you always have spare paracord when needed. If you like this model, check out my Rope Tensioner, Rope Hook and Webbing…
Unable to find a good antenna winder for portable amateur radio operations, I started tinkering with designs. A few iterations in, I came up with this one. Dimensions are approximately 140 mm x 55 mm x 5 mm. It provides room for up to…
![#0164 Mini Paracord Winders for the Pack [4 Variants]](https://media.printables.com/media/prints/882186/images/7020696_f2dda904-3cb0-4d82-af08-0a6562f1fddf_366f2abf-6147-415f-ab10-7b27d3b84067/rl-20240621-017.jpg)
