3,769 models
🛠 3D Printable Parts for 40x40 Extruded Aluminum Mount You can 3D print M5 nuts and bolts for use with 40x40 extruded aluminum using the models below: 🔩 M5 Drop-In T-Nut 📎 https://www.prusaprinters.org/prints/3246-m5-drop-in-t-nut 🔧 M5…
A NEW VERSION OF THE CASE A V2 is Available HERE : https://www.printables.com/model/1120097-flipper-zero-case-v2 SnapBumber for WifiModule : https://www.printables.com/model/392270-flipper-wifimodule-snap-bumper-v10 i'm learning 3d…
Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…
ZeroG Astronaut, printed for fun or serial videos for the Mercury One! Recommended settings: 10% infill 4 Perimeters 4 top/bottom layers
The zero play guide bar system is a huge benefit for anyone making and using jigs in a climate where conventional wood guide bars will expand and contract. I will use this with my table saw miter slot but you may find it useful with your…
One more case for Raspberry Pi Zero. This is simple, compact and quite rigid. The cover part has press fit with the main case. The board sits on four pins and from top is pressed by the cover part. Nominal clearances between the board and…
Marius' really nice Zero W2 case model only comes with a screw-fit back, whereas their Zero W case comes with either snap-fit or screw-fit backs. I tried using the back from the latter model but the pegs were slightly too large (~2.4mm).…
This is a zero clearance insert for Dewalt miter saws. I modeled it from the insert on my own saw wich is a DW716 (12inch, dual bevel, NON sliding) from what I can tell from the replacement inserts on amazon, this will fit models:…
Just a slim screwless case for the Raspberry Pi Zero 2 W
Enclosure for raspberry pi zero with HQ camera (flex cable inside). Feel free to adapt the model to your needs. The image quality of the camera is beautiful, and I'm happy with the result. I found a project called ShowMeWebcam, which…
I combined both styles of the original model's case as I preferred it this way. Both STL and STEP files are provided. The case needs short M3 brass inserts like these . You need to drill the m3 holes on the lid, as I included a layer so…
Introducing the Flipper Zero WiFi Developer Case, meticulously crafted for seamless assembly with just a click and snap mechanism—no screws needed. The design ensures an astonishingly precise fit, marrying functionality with elegance in a…
NASA Space coffee mug ( capillary cup ) enables drinking in zero gravity. Now we can all drink like astronauts. Also it is fun way of teaching kids about physics and space. If you want to drink from it make sure you treat it to be food…
I had trouble with my previous Stop Block having too much deflection, and my measurements were inaccurate. I also needed a little more reach because of the Incra track so I modeled this Stop Block. I included an insert for Rockler T Track…
Orange Pi Zero2 Case, Snaps together - No screws required! Includes a regular case and a case to mount on an Ender 3 rail vertically. Horizontal bracket for rail available to mount regular case. Enjoy!
Just a really slim screwless case for the Raspberry Pi Zero 2 W
drakengard 3/ dragon dragoon 3 lunar tear lunar tear with base note it will most likely have a bit of stringing might be better to print on a sla printer then a fdm one but is doable. the crown of the flower is fragile if you scale it up…
See: https://github.com/prusa3d/Original-Prusa-i3/pull/172
Ram from Re:Zero in an Easter Dress holding an Egg.
A small case for Raspberry Pi Zero 2 designed for PiKVM (DIY version with rpi zero 2) You need : 1x Raspberry Pi Zero 2 ( link ) 1x HDMI to csi ( link ) 2x hexagonal spacer M2.5 x 12mm ( link ) 4x screw M2.5 Parts to print (~ 1.5h with my…
The other Niche Zero stands did not fit properly my Ascaso bottomless portafilter, so i made another one. Still holds the Niche Zero dosing cup and can also be used with the standard double spouted Portafilter, although not hands free.…
Changelog 2022-08-23 v1.01 increased infill and perimeters for all caps 2022-08-21 v1.0 initial public release Please note: I have intended my models to be free of cost for the community, fun to print and a joy to use. Sadly, some…
The Zerode Katipo has a fairly narrow gap between the rear triangle and the main frame by the main pivot bearings. I found that rocks and mud would easily get in there and wasn't doing the frame any good. The rear wheel was also flinging…
Simple case for a Banana Pi BPI-P2 Zero with PoE add on I printed it in PETG, it gets a little warm with the PoE ad-on
This is a remix of Eondar's Center cam mount ( https://www.printables.com/model/370373 ) I found that it clashed with my ZeroClick mount, so I made a modified their version such that the left side is just a tad shorter.
My Raspberry Pi Zero W caused no end of problems with my MK3. With a little redesign, I switched to a BPI Banana Pi M2 Zero Plus and now everything works a lot better. If you wanted a WiFi-connected MK3 or MK3s (with a camera) but also…
This is intended to assist in the build process for the ErgoDonk Zero keyboard. These feet act as a ‘third arm’. They can be snapped onto the PCB to elevate it from the work surface while through hole components are added and soldered.…
Recommended print settings: Material: PETG Layer Height: 0.15 mm or less Infill % : 50+ Supports: Yes Print Orientation: Default as modeled I printed this model from Thingiverse, and am re-uploading to Printables. No changes made to the…
As i said i simply added the same hexagon pattern from the freewheeler / Deeps ' remix model into Bill W lid cover model for a perfect match & fit of the Pi Zero 2 W mount. I also reunited all the files into one so anyone can download all…
I currently moonlight design for a company called Sub 0 Angling. they make hand crafted custom ice fishing rods and gear. I was playing around with some ideas and threw this together. If you are into ice fishing or angling of any kind…
Made this insert so that I can carry my Flipper in the case https://www.printables.com/model/495471-flipper-zero-case-reinforced originally made by @f4r0kh, should also fit in other similar cases. Not a perfect fit on purpose to ease…
Keychain with the engraving of the Jezero crater of the Mars. It is made from a topographic map with contour lines at a height of 50 meters. Source: @ESA/DLR/FU Berlin. Under license Create commons BY-SA 3.0 IGO. See:…
Addition for the HDZero Goggles, to add a cold shoe mount via the front rails. Enables you to use cold shoe compatible microphones such as the Rode VideoMicro. There are two files, as the cold shoe mount is rotated 7.5 degrees relative to…
Small button cover for the 8BitDo Zero 2 that covers the select and start buttons to avoid indadvertantly powering it on in your pocket or bag. I printed it with the hole cutout facing up with supports. Printed at 100% infill. After…
Whenever I was riding on the zero motorcycle and there was mud on the road, I would find myself having to clean the rear braking light constantly. When you have the brake light covered in mud, it is really dangerous as other drivers wont…
Recommended print settings: Material: PLA or PETG Layer Height: 0.1 mm Infill % : 15+ Supports: No Print Orientation: Default as modeled Raft: No Brim: No Add a color change at layer 3 for contrast in the text.
SleepHQ I took the design and remixed it by adding the SleepHQ logo instead of the Raspberry Pi logo. Printing tips: The included code is for a Mk3S+ with a .25mm nozzle. The tighter your printer is calibrated, the better. The model was…
I love the NES Pi Zero controllers, and wanted to try my hand at a SNES version. Unfortunately the placement of two of the screw holes mean that the Pi Zero can't be flush with the front of the controller, so the ports are recessed a bit…
This is a Raspberry Pi Camera Case for a RaspberryPi Zero 2 W(H) with mounted UPS HAT (C) (Uninterruptible Power Supply including I2C) by Waveshare. Settings Value Infill 15% (adaptive cubic) Perimeters 4 Layer Height 0.15 mm Structural…
I needed a Raspberry Pi Zero 2W case for my Mini but couldn't find a solution I liked. My wishes: Mounted out of sight. Easy acces to the Pi and it's micro sd card. As open as possible to prevent cooling issues with the Pi or the DC…
Zero Effort Gravity Sketch Experiment. Can you import/export/edit/ create 3d models in the Oculus gravity sketch. Yes you can. The Import export of models and ability to edit them is pretty easy. Being able to stand in front of your life…
A remix for the case to work with the Pingegua NRF24 for Flipper Zero v1.2. In the original the dimentions for this model are off for goldpin locations, chip shield and antenna. I also added 1mm thick layers on top of goldpin and chip…
ZERO10X scooter shock absorber protectors, installation under the original fenders. Chrániče tlumičů koloběžky ZERO10X, montáž pod origo blatníky. PETG works well
I had printet it in PLA but other types are possible.
Small night vision built from RPI zero and accessories from Waveshare. Dimensions only: 12x6x5cm You need: RPi ZERO (with hat) (16 USD) MicroSD (8GB or more) (6 USD) Cam + light - buy cable for zero! (29 USD) Round LCD (15 USD) Battery…
Ein Podest damit man in einen Elektrokasten einen PI Zero 2W über das Netzteil stabil einbauen kann. Rastet in die vorgegebenen Löcher in der Box ein. A mounting platform that allows a Pi Zero 2W to be securely installed inside an…
A6M2 “Zero” is the next of new LW Planes series designed for easy and cheap flying. The build is simple even for a beginner. It’s very low weight, easy assembly and fantastic flight characteristics makes this model an ideal plane for…
Sick of auto bed leveling issues? The MAXPROBE backplate fixes them for good. Your printer should have come from Creality like this. Features Easy to install - takes just 10 minutes, no cutting wires or soldering needed Uses all original…
Simple protective case for the Flipper Zero Wi-Fi Module v1 development board. Flipper Zero Wi-Fi Board Docs: https://docs.flipper.net/development/hardware/wifi-developer-board Models Available: Full Case Requires 4x M3 screws/nuts for…
For Raspberry Pi Zero W so you can use Octoprint with your MK3/MK3S/MK3S+ printer. https://help.prusa3d.com/en/article/raspberry-pi-zero-w-preparation-and-installation_2180 If you prefer a step-by-step guide, it is available here:…
24.05.2021 update: case was designed for the raspberry pi zero W, it will not fit the older raspberry pi zero (different SMD board layout). a remixed version that will fit the old pi zero and also adds cut outs for the pin header can be…
**9/26/22** Updated model that uses 4mm screws with larger hinges and a small insert for an SD card in the top shell. Enjoy! Might revise the hinges since they seem like a weak point. I needed to drill the holes out a bit but other than…
A basic model of a Raspberry Pi Zero 2 W designed to be 3D printed or added to your CAD Model to confirm dimensions and placement of features. Amazon link to purchase a Raspberry Pi Zero 2 W once you have confirmed all of your dimensions.
About Stealth Press ZERO Stealth Press ZERO: Compact Precision Heat Set Insert Tool. Stealth Press ZERO is a miniaturized version of the original Stealth Press , offering a highly precise, mostly 3D-printed DIY heat set insert tool…
The Zero Point Sprite from Fortnite. This is my first actual handmade model sculpted and everything so hopefully you guys like it and yeah thank you for the support. Portions of the materials used are trademarks and/or copyrighted works…
Remix from fivesixzero -Case for Flipper Zero Wi-Fi Module v1 minimal case, added the SD card reader cutout to the back of it and added an easy way to press the power and reset buttons since they were a bit hard to press. Link to the SD…
This is a simple case I designed for the Orange Pi Zero 3 . You will need to print the base and select the top cover of your choosing. Personally, I like the external antenna versions. Simply run the antenna wire in the slot above the SD…
This is a replacement backplate for the Creality Ender 3 S1/S1 Pro Sprite Extruder that moves the CR Touch probe inline with the nozzle on the Y axis producing a zero probe offset. Many people are having issues with automatic bed leveling…
Tired of wasting wet cat food left inside sachets? Cat Food Squeezer is a simple, practical, and fully 3D printable tool designed to help you extract 100% of the food from cat food pouches — quickly, cleanly, and without messy hands. A…
This is a complete remodel of the Flipper Zero case. It uses another type of hinges, as the original ones tended to break off. Its also slightly smaller. It prints with no supports. I used M3x20 screws. It might help to drill the hinges…
Simple Raspberry PI 2 (W) case with honecomb air vent holes. Use 4x 3x14 screws and 6x 3x3x5 brass insert nuts. Upd: added v2 version with hidden screws
Outside dimensions of the model: The holes are 6mm x 11mm This is version 5 of a plastic replacement buckle that I designed with the FDM 3d printing process in mind: No support is needed Prints in only 30 minutes Optimized print…
I present to you the cover that I modeled directly around the official 3D model of Flipper Zero. The thickness of the bumper is 2mm It was made with a very soft TPU due to the wrapping surface of the case and the difficulty of inserting…
Slim Raspberry Pi Zero 2 W case, no pin header.
U will need: Case - M2.5x10 self tapping screws X7 Pi - M2.5x6-8 self tapping screws X4 Mounting to 3060 extrusion (30mm spacing) - M5x10 BHCS or SHCS X2 No supports are needed for this design. Red faces can be removed for wire/ribbon…
A quick printing case for the Raspberry Pi Zero 2 W The Zero 2 W is a great little workhorse but who wants a bare board sitting around? Cover it up with this minimal case. This case is primarily printed flat with fold lines designed in…
I wanted a zero clearance insert for my DeWalt DWE7485 jobsite saw and printed another I found online but it didn't fit my saw very well so I set out and whipped this one up. The insert fit well enough and was fairly straight forward to…
Pre-cut for printing without support or in one piece.
The Thunderjaw from Horizon Zero Dawn modeled with CATIA V5.
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
Pre-cut for printing without support or in one piece.
Zero play guide bars for jigs on table saw. I primarily made this for a new cross cut sled but they are applicable to anything. Would recommend using PETG as it is very low friction and won't warp much at all. My process for assembly to…
The only other TPU case for flipper zero did not cut it for me, so had to create my own. I would recommend printing this in softest TPU possible, as it might be a bit hard to put it on the flipper. history v1 initial release v2 wider…
We've created a test print to calibrate your settings printing in ABS/ASA . The test print contains 5mm Dowel pin hole top to bottom This is a 5.3mm hole to compensate for shrinkage 5mm Dowel pin hole side to side This is a 5.3mm hole to…
This is a 300mm version of Zero. The body is hollowed out and runners have been added along the bottom to line it with LED light strips. I have added a hole in the back to accommodate a ½ in dowel rod with a handle that way when I “walk…
Printsettings: Layerhight: 0.2mm No Support Needed No Screws needed. New: New lids and cases for various uses. All variants can be combined with each other.
This latest design has major improvement on the hinges and the latch. Design features choose between 1mm or 2mm thickness hinges use printer filament as hinge pins hole for lanyard locking latch access to ports iButton LCD display…
Introducing the indominable Tallneck from Horizon Zero Dawn! This machine is to scale with the official board game and stands on an incredible 150mm base. It has been split into many easily printed parts that come together without any…
LRS-200 : M4x5-8mm BHCS, SHCS x4 *8mm bolts may too long, be careful. RS-25 : M3x5-8mm BHCS, SHCS x 2 *8mm bolts may too long, be careful. raspberrypi : M2.5x5mm or longer BHCS/SHCS x4, designed for considering self fixation without using…
(its left arm didnt print properly ;-; i suggest cutting it off in slicer and printing separately too) Im printing the model like this to save time and filament^ Use color painting (or equivalent), or print white and paint. I printed the…
I decided to upload the Flipper Zero Case from Shutdown on Thingyverse with insert from RobbS since I couldn't find it here on printables. :) If I just did not see it, please comment with the link to the model and I will delete this…
Pre-cut for printing without support or in one piece.
Introducing the Sawtooth from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 60mm base. It is intended to be printed in one piece with the base separate. All credit for character design goes to…
This is a quick and easy way to add Magnets to your 3D Prints! No Supports needed and print crazy fast. Make as many copies as you need and get them printed. You can also scale them up in size to fit larger magnets. Specifically designed…
This is the shell of a flipper zero. Front and back plates so anyone can make their own custom version
Pre-cut for printing without support or in one piece.
Introducing the Watcher from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 10mm base. It is intended to be printed in one piece with the base attached for stability. All credit for character…
Flipper Hard Case V2 of.stl is a open face case for a Flipper Zero to access the screen, buttons, USB, IR transmitter and GPIO pins. Flipper Hard Case V2.stl is a full hard case This version does not require hardware as it uses folding…
This is a case designed for the OrangePi Zero 2W it's made to be about as small as possible with clips to hold the wifi antenna inside the case. In the design I have included knockouts for a 14mm X 14mm heatsink as well as the GPIO…
Print Settings: PETG or PLA 0.15mm 15% infill M2 x 5mm (Countersunk screw) x 4
Snapfit case, but with honeycomb pattern. Enjoy!
This is a remix of the fivesixzero's Case for Flipper Zero Wi-Fi Module to use it with Ruthex M2 threaded inserts and M2 screws instead of M3 screw + nut. The screws needed are M2x7mm. I also made a version with the Marauder Skull logo on…
You need foam from the shipping box and M3x30 screws. I know there is another ready-made model but it didn't suit me so I made my own.
Update 20240718: added HD version. Tips: It stands pretty well when printed with 20% or higher infill density! This is the fan art of Sharkboo from Zenless Zone Zero. The item is .stl files for the figure, designed for 3d printing. I…
This Creality Sprite Extruder backplate relocates the CR Touch probe to X=-47mm, Y=0mm. This allows the bed mesh to be more accurate along the Y axis because the hotend lines up exactly with the probe (useful if the Y extrusion is…
Listed below are some changes that were made. Switched to use M3x25mm screws, nuts, and optional washers. Moved the Flipper Zero to the bottom of the case and moved the devboard compartment to the top. Added Flipper Zero text & logo to…
Introducing the Stormbird from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 120mm base. Use with the Stormbird expansion during gameplay for the landed stance. It is broken up into smaller…
This is a kit of a scale model of a fictional house. It is a HO 1:87 scale model. I call it “House zero” because it is my first kit in my collection of miniature houses in HO scale. It requires assembly. The walls can snap onto the…
