Counting matching models…
Hello! I work at UPS, and IDK if they're just being cheap, or if Honeywell can't produce the parts. But the straps and comfort pads for our scanners have been in very low supply since like December. I've been making my own Velcro (hook &…
Frequency F: 868 MHz Wavelength λ: 345 mm Element diameter D: 1.6mm Material: 1,6 mm copper tubes Total number of elements : 5 Gain: 10 dBi Reflector length R: 168 mm Vibrator position F (R-F): 69.1mm UPD (15.03.26) - Vibrator length F:…
CUSTOMIZABLE VERSION here <- click as you might guess, I highly recommend using the customizable version, where you can tweak all the parameters to your liking, only upload stls for the versions I actually used. If you somehow cant use…
Holder for the included nozzles that snap fits onto the base station
Replacement gear for the Dyson Mini Motorized Tool / Mini Turbo Brush (my unit label: 158685-05 , 16.2V , 30W ), commonly used with Dyson cordless vacuums (often paired with Dyson V10 ). I designed this gear from scratch and printed…
This is for the model/part Carrier 309868-755 (with aftermarket product Packard 66755). These vary for between $250 and $1000 online. My motor was still perfectly fine, the but the broken fin was causing huge imbalance on startup and it…
Weather station case for an esp32 D1 mini and a RF receiver. Project repository for the hardware: https://gitlab.com/raupulus/esp32-weatherstation-bresser-read-868mhz-cc1101
If you find my designs useful, please consider sending a tip Somehow lost one of the domed clips that holds the boot scuff / landing plate in place, had absolutely no luck finding any online or even figuring out the correct name for the…
A 120mm Fan to HEPA Filter Adapter to remove printer fumes, remixed from MQ1991 work here and my work here . MQ1991 model was good but after repeated replacement of the HEPA filter, the plastic taped screw holes began to degrade leading…
Port cover broke, so I modelled a new one since I couldn't find it anywhere. There is a logo on the model, but when printing with TPU it doesn't show at all. I have slightly elongated the part that goes under the battery to help offload…
A case for Kincony K868 A16 esp32 board. Mounts to a DIN rail with: https://www.thingiverse.com/thing:1110765 Based on the Herr Braun design on thingiverse: https://www.thingiverse.com/thing:6837967
Připojení přes střední vložku. Není třeba vrtat. Krytí mikrotrubičky. Tisk s límcem a podpěrami. PETg/PCTG 15% infill
Porta Telecomando Faac XT4 868 SLH LR per auto, ideale da applicare sulla aletta para solo dell'auto. | FAAC XT4 868 SLH LR Remote Holder for Car, ideal for attaching to the car's sun visor.
The holes in the back can be used to screw a din rail mount, I've designed it to fit this mount or the ones that you can buy from Aliexpress. This model is heavily inspired by https://www.printables.com/model/1129540-kincony-k868-a16-case…
A simple case for the Kincon KC868-A6, Includes Case Base Case Top Display Spacer Requires M3x5x4.5 inserts
Remote control case. Two versions, one with buttons. The other version only has holes. The case is designed to prevent accidental button presses in your pocket. perimeters: 4 layers: 0.2 I look forward to seeing photos of your prints. :-)
Wall-mountable enclosure for the ESP32 six-relay module Kincony K868-A6. A model is included to facilitate further modification. No printing supports needed. Some walls are thinned - they are translucent. Alternatively, they can be easily…
The main goal of this design was to add a kickstand to my TD8680 Digital Gaussmeter for easier viewing. Along with the printable parts, you'll also need: 4 M3 hex nuts (pressed into shell) 4 M3 x 5mm bolts The main shell was printed in…
Model designed in Autodesk Fusion. Antenna created with Moxgen software. Dan Maguire AC6LA https://www.ac6la.com/moxgen1.html Design under Autodesk Fusion360. Mount for navigation holder. Mount for Ikea Tisken suction cup.
Thank you to the original designed for including the STEP files. It made it a lot easier to remix the models. On the left and right are mounting holes for the Cable clamps to secure electrical wiring to the base. The Cable clamps come in…
Gridfinity organizer for WIHA Go Box #76868. Version without lettering available in the files tab.
If you need a modified version then check here: https://www.printables.com/model/1348326-parametric-flanged-split-bushing-sleeve
5.25" drive bay cover for a RAIDMAX Scorpio 868 case. Modeled after the original cover. Printed in PETG.
Grommet for the linkage between the carburetor and transmission kick down lever.
Grommet for the linkage between the carburetor and transmission kick down lever.
Is your TX40-868-4 remote missing buttons or showing signs of wear? This 3D model provides a simple and effective solution: replacement buttons designed to fit perfectly into the original button slots.
Remix for use with Meshtastic Requires SMA crimp connector, a piece of heat shrink tubing, and RG174 cable or similar diameter. Glue the connector with the crimped cable into the antenna using 5-minute epoxy or another glue .
Hello! I work at UPS, and IDK if they're just being cheap, or if Honeywell can't produce the parts. But the straps and comfort pads for our scanners have been in very low supply since like December. I've been making my own Velcro (hook &…
Abmessungen (Changpuak-Berechnung, 868 MHz) Frequenzbereich : 850-885 MHz Wellenlänge : 346 mm Boomlänge : 336 mm (Ø 18 mm) Elemente : 6 (Ø 2 mm, Messingrohr) Gewinn : ~9 dBd Elementlängen & Positionen: Reflektor: 167 mm (Pos. 0 mm)…
Materialien & Bauweise Boom & Halterungen : PETG (Outdoor-tauglich) Strahlerelemente : 2 mm Messingrohr - Abmessungen siehe dozorfeo Sleeve-Balun: 6 mm Messingrohr für RG58/Aircell5 Montage : Sekundenkleber + modulare Adapter…
The remote is dropped in and it holds nicely in place. Should print on any printer. Printer: Prusa MK3 0,4 nozzle Filament: PLA It is my first upload, so be kind. There is a new version out. It is taller and has a tighter fit, because I…
I grabbed a set of Motorola XPR3000 series replacement knobs off ebay to replace the stock ones which are pretty meh. I had to trim the slight overhang of rubber off the bottom of both knobs to make them fit nicely. The channel select…
Der Halter wird einfach um die Stütze des IKEA Ivar Regals geklipst und hinten mit einen Pin in einen Loch arretiert. Da die Löcher des Ivar Regals einen unterschiedlichen Abstand besitzten, wurde in dem Modell ein Langloch verwendet.
Another Moxon antenna. I don't trust other designs and decided to design this antenna to my own specifications. This antenna was designed for PETg plastic, so the dimensions differ from those given by the calculator for a frequency of 868…
Spare part for Beninca motorized gate system replacement for plastic nut Beninca 9686873.
Hi, here comes a small housing for the RFD 868x long range telemetry module from RFDesign. It should also be suitable for the RFD 900. The Dimensions are about 65 mm x 36 mm x 16 mm The heat sink and the screws are flush-mounted. You need…
Makes it easier to assemble the 868 MHz LoRa Yagi by Taste The Code. Assures the dipole is square and symmetrical inside the boom, with 2mm spacing. https://makerworld.com/en/models/1120277-yagi-antenna-for-lora#profileId-1118525
Update as of August 16, 2021: Updated the files. the original upper part had a flaw where the pins under the buttons were floating in midair. This is corrected now. Should prind no problem! Thanks to @mrBira for the heads up! Replacement…
Moxon Antenna Frame (868MHz) For copper wire with a diameter of 1.6 mm.
cover suitable for the remote FAAC models XT2/XT4 433/868. Very useful to protect your remote and easy to put/remove from it! It has to be printed with TPU or any other softer filaments. Leave a like if you like it thx!
My garage door fob broke and couldn't feasibly be glued back together (again) so I made a 3D printed repair. 2024 edit: (Several people have asked me over the years if I also have the back part of case, or the switch. The answer is…
Frequency: 850-885MHz Gain: ~10dB location and length of elements (from left to right): Vibrator length: 173 mm Length of the reflector: 181 mm Director 1 length: 164 mm Director 2 length: 162 mm Director 3 length: 160 mm Montage:…
Einsteckmutter OEM 357868143 für Unteranderem : Vw Bus T 3-4 Golf 1-2-3 Passat B2 -32B-35i -B3 Polo 1-2F Vento und und und......
Frequency F: 868 MHz Wavelength λ: 345 mm Element diameter D: 1.6mm Material: 1,6 mm copper tubes Total number of elements : 5 Gain: 10 dBi Reflector length R: 168 mm Vibrator position F (R-F): 69.1mm UPD (15.03.26) - Vibrator length F:…
CUSTOMIZABLE VERSION here <- click as you might guess, I highly recommend using the customizable version, where you can tweak all the parameters to your liking, only upload stls for the versions I actually used. If you somehow cant use…
Holder for the included nozzles that snap fits onto the base station
Hi, here comes a small housing for the RFD 868x long range telemetry module from RFDesign. It should also be suitable for the RFD 900. It´s a Remix of the original “ RFDesign RFD868x housing” It comes with the additional cable outlet for…
General This is a quadrifilar antenna for 868/915 MHz with mount and radome. Antenna has been succesfully deployed for TinyGS: SA0PEJ_900 There is a 70cm version of this antenna available. qfa-qfh-antenna-70cm-band Printing and building…
Replacement gear for the Dyson Mini Motorized Tool / Mini Turbo Brush (my unit label: 158685-05 , 16.2V , 30W ), commonly used with Dyson cordless vacuums (often paired with Dyson V10 ). I designed this gear from scratch and printed…
This model is compatible with the lego system.
This is for the model/part Carrier 309868-755 (with aftermarket product Packard 66755). These vary for between $250 and $1000 online. My motor was still perfectly fine, the but the broken fin was causing huge imbalance on startup and it…
The moxon antenna at 868 MHz is combined with the Heltec V3 (V4) board in one housing for stationary use in the Meshtastic or Meshcore network. There are two installation options: on a stem for indoor or outdoor use, and on a mast using…
Wall mount with extension from the wall. Insert Nuts M3xD4.6xL5.5.
Wall mount with extension from the wall. Insert Nuts M3xD4.6xL5.5.
This is 868Mhz LoRa Meshtastic Yagi-Uda directional antenna with 6 elements and square boom. Actually calculated for 869Mhz, since this is closer to real meshtastic working frequency in UE). Dimensions were taken from widely-known DL6WU…
Yagi antenna model for 868MHz with built-in Heltec V3 (V4) module. The design consists of three elements for easier printing. The parts are assembled using glue and 4.5x9 self-tapping screws. The module cover is attached using DIN7981…
Designed from the ground up for clean, durable toolbox organization using the Gridfinity system. This model was inspired by the excellent tool organization work of RobNordic, but every dimension, fitment, and feature in this design was…
This is a full radom for Moxon Antenna. Added the V5 version with pole fixation and line to close the radome more firmly.
Meshtastic case sized of a car alarm keychain. Key idea - make cheap keychain meshtastic node - always with you. You connect it, charge it, sending/reciving messages... thats all. No place for buttons or attachments - just basic…
Holder for Radar Distance/Level sensor Model EM410-RDL-868M/915M Attach to pole with two 1.5 cm wide metal straps The sensor itself should be water proof but the file for the lid is included
Give your Meshtastic / MeshCore node a proper RF front-end. A SAW filter in front of your LoRa radio cuts out-of-band noise (LTE, GSM, pagers, etc.) and noticeably cleans up reception — more stable mesh, better range, fewer missed…
What? I've created a case for a FAAC DL2 868-SLH remote (in my case, used for a garage/car-park door), as mine broke but the electronics were still fine (and a new one + programming cost 40€). I only found this one for this specific…
A hook and eyelet fitting for 868 mesh fencing. You'll need 1x Back and 1x Hook_1 + 2 or 2x Eyelet with 4x M4x4 inserts and 4x M4x20 countersunk screws. In addition, there is a mailbox holder you can use if the horizontal distance of your…
I needed a way to program multiple ESP8685-WROOM-05 H4 Modules for replacing in smart globes I got that were not compatible with home assistant. Printed. I used a 1mm drill bit to clean the holes for the pogo pins. If you need a model…
I needed a way to mount/hold my BTech DMR-6X2 portable radio while mobile. This was designed for use with a belt clip and with or without a battery eliminator. I decided not to incorporate the RAM ball mount in to this design since there…
Sottile cornice per riparare l'occhiello rotto del radiocomando stampato in TPU è il TOP, se stampato in PLA è un po' strettino ma cosi non si sfila. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution:…
I was after a simple case to print for our remotes and originally used the case by @arminth which was great but did not last too well as the sides where the cases overlap were quite thin. I guess we are not very careful and they just get…
Saab 900NG / 93OG shortshifter + custom gear knob adapter Replacement for Saab 4027868 If you don't have a 3d printer you can buy the piece here. The problem with original part it's need to be blocked by the original knob, if you put…
Hello, I designed this Hormann remote for replacement for the origional Hormann HSE2-868-BS. Searched on Thingiverse but not fount something that worked propperly for me. The only hardware u need is an M3 bolt with a treat of 8mm long.…
This is a battery cover for a AnyTone 868/878 or BTECH DMR-6X2 series 3100mAh radio battery. It protects the live contacts on both sides of the battery from getting shorted when tossing it into a bag. I printed it in ASA and PLA. Both…
Holder for Hörmann remote control. Key hs5-868-bs
Neues Gehäuse für einen Garagentoröffner von Hörmann HSE-868 Zur Montage benötigt Ihr noch zwei Schrauben M2x8mm mit Mutter und den Ring zur Befestigung
Powerful antenna validated :) Design under Solidworks Created with Moxgen a software from AC6LA I will upload pictures later. other software used to compute Moxon Antenna : 4NEC2 EZWdemo (EZNEC) Happy printing Renba ON5DB Category:…
Printed template for DIY small 868MHz / 915MHz antenna. Total size 26x6mm alternative to 160mm dipole. Use 0.7mm wire to make the antenna spring. Use coaxial IPEX4 antenna cable, solder active, central wire to the spring (no passive part…
868Mhz / 915MHz Antenna Dipole cover and mounts To get different angle mount and have antenna 10-15mm below bottom plate use lighter to gently warm-up printed handler . It will be much stronger then print of angled mount due to filament…
A loop for Hormann Remote Control Protective Sleeve (HSE4BS, HSE2-868-BS) such as Hormann HSE protective case by Jakub Kalfař or HORMANN Coque pour télécommande by nico206 . Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 3…
A spacer that goes between this loop and the body of the remote. It is to be used with Hormann HSE protective case by Jakub Kalfař or HORMANN Coque pour télécommande by nico206 . Glue it to the loop so it's easier to assemble. I uploaded…
A front cap for Hormann Remote Control Protective Sleeve (HSE4BS, HSE2-868-BS). To be used with Hormann HSE protective case by Jakub Kalfař . I uploaded a STEP file so you can change the dimensions if your doesn't fit. It's important it…
This is part of my Long Range Weather Station project : https://hackaday.io/project/191652-long-range-weather-station I wanted to increase range for my 868 MHz lora devices. I followed the link of this "biquad calculator" :…
My variant of Volvo's fuel line clip 8683718. I lengthened the inner part by a total of 1 mm for a better grip on the screws, since over time the screws rusts and the clip sits worse. Print Settings Printer Brand: Tronxy Printer: X5SA…
Simple protective cover for the HSE2-868-BS Hörmann hand-held transmitter. In my case, the holder for the lower part broke off. This keeps it in place. The cover also protects against fall damage, as this is how I damaged the lower part.…
This is a case for the USB 868MHz wireless dongles for RAMSES HVAC systems created by https://indalo-tech.onlineweb.shop/ Print vertical no supports Category: Electronics
This is a free-standing HEPPA vent to attach to the end of a 4" (101mm I.D.) vent hose for 3D printer & laser engraver enclosures. There is plenty of extra room in the filter compartment for activated charcoal/carbon filter sheets. This…
** THIS IS A VERY ROUGH WORK IN PROGRESS ** I am not an expert in 3D Design by any means, this looks rough, but it works. If you have the skill and would like to remix this so it looks better/preforms better, please do! See new and…
Ground Plane Antenna 868MHz (or for other frequencies like 433MHz or 915MHz) for Meshtastic or anything else i used 1,5mm² (1,4mm diameter) copper wire to find in Europe in the standard NYM cable or AWG 14 or 15 in the US -stretch the…
This designed for RFD 868ux module for ground control station to mount the telemetry module on tripod in compact casing
This is a very efficent dipole antenna for Lora network. It is tuned for 868MHz frequency more information here : https://github.com/CongducPham/tutorials/blob/master/Low-cost-LoRa-IoT-outdoor-step-by-step.pdf Print Settings Notes: print…
This is cover for 868MHz RFID SAW bandpass filter from Aliexpress . After printing, glue together with hot glue gun. I have used black hot glue.
This model is compatible with the lego system.
A beautiful square flower vase with puffy loops, for decorative purposes to hold artificial flowers. It is 170mm tall and 103mm wide. The photo shows the vase printed in vase mode. It can be printed in vase mode or printed in normal mode…
