11,060 models
Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place…
Print approx. €0.45–€0.54 excl. taxPreliminary estimate for one variant
This model has been verified for compatibility using a GoPro Hero 4 case. It is not an official GoPro part — geometry recreated for functional interoperability. Dimensions: Diameter (x, y): 29.5 mm Height (z): 17 mm Hole size: M5 screw &…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
This is a remix of The Standard 4x5 from Standard Cameras ( https://standardcameras.com ) and has been shared with permission from the owner Drew Nikonowicz ( https://nikonowicz.com ). The bellows and ground glass needed for the camera…
Print approx. €17.00–€20.78 excl. taxPreliminary estimate for PETGSource material: PET
1/4 zoll Schrauben und Muttern für Kameras und Stative. Die langen Schrauben können mit FreeCAD auf die benötigte Länge gekürzt werden.
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
I remixed this model because I had a collision with the connection of two frame parts on my Core One. To fix this, I thickened the contact surfaces slightly and moved the camera a bit further inward. This now allows for a secure fit,…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET
Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. Added x axis strain relief to…
Print approx. €1.17–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
If you like my work please support me. :-) Buy me coffee at ko-fi.
Print approx. €0.94–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE: Thanks to community feedback I have added additional sized inserts for different phones (so there's more of a chance of a snug fit for your phone, but a looser fit is okay long as it doesn't fall out!) as well as a version with…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
This very fast print can be mounted over any selfie camera (mainly designed for Tesla interior cameras). If you use it for laptops, ensure that it does not damage your display (as the Slider is not flush with the housing. Be sure to print…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
The Mini Tripod for DSLR and Digital cameras offers a full 360 degree rotation plus 180 degrees of tilt and is exactly what I was looking for specifically for 3D scanning. It also locks down well, once you add the noted washer to the deck…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Both pieces need supports . It should take less than an hour and a half in total. For the settings keep reading, for the story skip down below. The assemble it make sure all supports are cleared and slide the end without the ridges under…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
If you have a camera capable of taking 220 roll film you can use it to expose a full roll of 35mm film using the adaptors in this print. I've tried other 3D-printed adaptors but none worked in my Hasselblad A24 magazines, which is why I…
Print approx. €1.56–€1.90 excl. taxPreliminary estimate for PETGSource material: PET
After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
Gopro Action Camera Extension Mounts - Estensione per Gopro Type A Type B Type C (update 06/02/2025) Type D (update 04/06/2025 22/06/2026 Update 19/08/2026 Added GoPro_Ext B 300mm Suitable for: Resize to adjust dimensions All our designs…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Here is my iPhone Monitor Mount, the perfect solution for using your iPhone as a webcam during Zoom and other FaceTime calls. This mount is designed to work with a Viewsonic monitor and may work with a variety of other monitors. This…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
I wanted to have a bed-mounted camera on my Ender 5 S1, but all of the premade ones I found didn't fit in one way or another. This should be compatible with any 2020 extrusion; I included holes in the side and bottom for locking it down…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
This is an original design. This is for Prusa. This is easy to print. This is for OctoPrint. This is smart #3dp design and 100% printable. </b> #3dp Update: 2nd Gen Mount is out! Improved stability, fit and cable guide. If you like what…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Camera mount to attach a Wyze camera to your Ender 3 S1. It's still a WIP as it'll require a dab of hot glue to actually hold on to the printer. Prints easily on my Ender 3 S1, just have to flip the model 180* so it'll sit flat. No…
Print approx. €1.72–€2.11 excl. taxPreliminary estimate for one variant
First up, the articulating camera mount is a great piece of design, the sheet number of remixes and additions that have been released shows how popular the design is. However, I have found that the printed threads on the nut and bolt for…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
This is an Update to the Generic Camera Arm for SV06 & SV06+. To Date it is my most popular viewed and download model. So now I'm revising it. It now Includes a Small Lip on the block to prevent arm form twisting. The single screw…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Use the screw that came with the camera case. Push the back of the print into the slot and push the front firmly until it clicks and is securely in place. Use the lowest possible layer height and a wall count of 4 for best results (with…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Unfortunately, this case https://www.printables.com/model/1193119-esp32-camera-mod-for-core-one was too small for my ESP32-CAM (AI-Thinker and clones). So I modeled a similar one from scratch. Update, March 9th 2025: Created a new version…
Print approx. €1.76–€2.16 excl. taxPreliminary estimate for PETGSource material: PET
I liked the mounting system created by Sneaks. But it did not fit my Raspberry HQ camera. i made this case to fit on the arm with the same ball system as the original case. I printed it in PETG. Its made to be a tighth fit with the…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple mount that provides a 10 degree down and 10 degree lateral off-set for a Ring Stick-Up Cam. The standard Ring mount allows limited direction adjustment via a ball joint. This mount compensates for this. It is useful if…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
The original model fits on a Skoda Enyaq, but it blocks a bit sight at the bottom. Furthermore, i have added a small opening to drain water.
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…
Print approx. €4.09–€5.00 excl. taxPreliminary estimate for PETGSource material: PET
The argent eye was my first attempt at creating a 3D printable camera back in February 2020 and has been somewhat obscured by the fact that I kept it on Github. Despite being my first camera, it is capable of taking most, if not all the…
Print approx. €7.92–€9.67 excl. taxPreliminary estimate for PETGSource material: PET
The purpose of this protector is to protect the lenses of the cameras from scratches and shocks by creating a protrusion for the camera section of the phone. Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: eSUN PETG…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
A simple, easy to print holder for an endoscope/borescope. Will accommodate 7.5mm diameter camera, should work ok with smaller ones (eg, 5.5mm) too thanks to clamping screw. Retains the camera position geometry from the original, but…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
Notice: it's not only for the ender 3 v2 Model descriptions: arm rail mount for a aluminum extrusion (tested on ender 3 v2 extrusion) this one the just tall enough to peak over the ender 3 v2 bed height, this is around 10 cm and 12 cm…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for one variant
I hunted at length for a mounting bracket made specifically for the Blink Mini that would mount it high enough above the bed to see the model, low enough to see the extruder nozzle, and offset far enough forward to be able to spot…
Print approx. €3.39–€4.15 excl. taxPreliminary estimate for one variant
I wanted to mount the reolink Argus3 camera with it's corresponding solar panel on a 100mm drain pipe. I printed in PETG. Let's see how lang that is going to last in the sun. Material for camera mount: 1 x 20mm M6 screw 1 x M6 hex nut 2 x…
Print approx. €3.58–€4.37 excl. taxPreliminary estimate for PETGSource material: PET
Mount fot cctv camera that enables the possibility to mount it to a corner of a building. Reccomended for the camera to be a 360º or a rotating camera. If neded any modifications for the mounting holes don't hassitate to ask.
Print approx. €5.13–€6.27 excl. taxPreliminary estimate for one variant
Cache griffe flash - Camera Hot Shoe Cover
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET
MATERIAL Raspberry Pi 4b Raspberry HQ Camera C-mount lens. In my case a 100mm telephoto lens . Cooling housing for RPi 4b (total height below 24mm) Anker 2000PD or Anker 325 Powerbank USB-A to -C cable Threaded inserts for tripod mount. I…
Print approx. €5.10–€6.23 excl. taxPreliminary estimate for one variant
The aim of this project is to provide an open source, top of the line camera slider for e.g. timelapses, that costs approx. $100. This project is somewhat advanced and requires several non 3d printed parts. This is to provide a slider…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
This model is free. If you appreciate this model, please leave a download and a like! A simple ring for pan tilt sets from China. The ring supports the servo. This enables stacking multiple sets into a robot arm or lifting bigger sensors.…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Got a need to mount a Google Nest Hello by your front door, but the wall where your doorbell currently lives is perpendicular to the door? Well, this mount is intended to give the camera the ability to crane it's cold glass eye around for…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for PETGSource material: PET
A mount to fix a 38x38 mm PCB camera into one of the corners of a Voron 0.2 tophat. The camera I used is an ELP 4K IMX317 170° Assembly I used 4 M2 self tapping screws to fix the camera to the mount and 2 M3x20 SHCS to attach the mount to…
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for one variant
Smartphones put power in the hands of everyday people to hold awful behavior to account, but holding up a phone makes you a target. This print lets you use your phone as a body camera, and attaches to a shirt, lanyard or backpack. Add an…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Mount is compatible with Reolink E1, Reolink RLC-410W, and TP-Link Tapo C200/C210
Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant
I needed to place my Xiao Mi 360° smart camera high up, but the pan/tilt functions could not cover the whole room. I modelled this simple mount to hold the camera at downward 45° angle.
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
Easy to make a cute Cat holding a Camera keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
After I replaced my stock camera module with Arducam IMX219 Auto Focus Camera Module , I found out that it can't fit in cover provided in Articulating Raspberry Pi Camera Mount. So I took its step file and aligned camera module hole by…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
simple mount. please understand layer line weakness before printing. small frame may show on sides if full 360
Print approx. €4.52–€5.53 excl. taxPreliminary estimate for PETGSource material: PET
This is a mounting bracket for attaching a camera to the bed of your AnkerMake M5C/M5. It has a space for the metal bracket for a Wyze Cam V3, but the head can be modified to fit other cameras. I used Tinkercad.com to modify this design,…
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for PETGSource material: PET
————Required Hardware———— Item Cost Seeed Studio XIAO ESP32 S3 Sense ~$24 IKEA Lillhult USB-A to USB-C Cable ~$5 Old Apple (iPhone) 5W USB power adapter ~$0 5 × M3-0.5x8mm Socket Cap Screws ~$4 I pick the Seeed Studio XIAO ESP32 S3 Sense…
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for PETGSource material: PET
Simple holder for the camera TrueLife NannyCam H32 printed as a single piece. The camera holder is just a cut cup, ensuring a firm grip on the camera. The connected base now has stronger feet to ensure a proper and stable grip, even with…
Print approx. €2.25–€2.74 excl. taxPreliminary estimate for one variant
Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
Model This project is still a work in progress so there are no instructions for detailed assembly yet, if you are keen to try the cage out pick up two 32mm Rosette plates and some 3/8"-16 to ¼"-20 Screw adapters to reinforce the 3d…
Print approx. €26.82–€32.78 excl. taxPreliminary estimate for PETGSource material: PET
Mounts to an existing monitor VESA mount (100mm hole spacing) using the existing machine screws and holds a tripod head with a standard hex-head 5/8"-16 bolt (not included). Tripod head mount can be up to 55mm in diameter. Center point of…
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for PETGSource material: PET
English below. Hier ist ein Remix der auf 80% gescaled vom Orignal ist, um Gewicht und Platz zu sparen. Dieses Stativ ist ideal für reisen mit kleiner Fotoausrüstung ohne auf etwas zu verzichten! Hoch oder Querformat sind problemlos mit…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
English: Camera holder for baby monitor Philips Avent SCD923/26 for IKEA SUNDVIK cot. Easy to print! Print on the side, no support needed. Please don't forget to share a picture of your print. Czech (čeština): Držák kamery chůvičky…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for PETGSource material: PET
I havce modified the Rames The Generic XIAO Sense Case (Seeed Studio XIAO ESP32S3 Sense, Camera) mount to be compatable with Michal Fanta 's Articulated arm.
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
This case doesn't require any additional hardware, it just snaps in place. I suggest printing it with PETG but also PLA should work as well. To make the snap fit work propely be sure that there aren't any debris in the way left after the…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Description: 2020 Aluminium extruded profiles are extremally useful for construction of 3d printers, laser cutters and other cnc machines, hence they can be found on the shelf of every maker. This design open up a new opportunity to use…
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for PETGSource material: PET
I had an existing quick release mount from my normal camera tripod. But i needed a quick release base on my small desk tripod for usage of a dslr as webcam. With the print i can attache the existing camera mount (ground is round about…
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for PETGSource material: PET
Priehľadný akrylový kryt som použil z atrapy bezpečnostnej kamery od výrobcu ORNO typ OR-AK-1210. Priesvitný kryt z uvedeného typu atrapy pasuje presne na vymodelované kolíky v hornej časti krytu. Pre fixaciu sú použité 4 ks podložiek ,…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
This is a complete ecosystem of parts needed to place a small camera somewhere and fine adjust its orientation around all three degrees of rotational freedom. The problem: Using an action camera to capture our wild and crazy activities…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
This model lets you mount a Freenove ESP32-WROVER board (buy from their global site or Amazon ) in your enclosure and use it to automatically upload images to Prusa Connect. The mount provides two degrees of freedom to adjust the aim of…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for PETGSource material: PET
My Exa camera was missing the takeup spool, so I made my own. Printing Print with the dome faceing upwards and the hole facing the print bed. Requires some support.
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
A Remixed Cover Lens for a Raspberry P1 Camera V2 board with an ArduCam 8MP IMX219 Sensor module (for RPi and Jetson Nano) with a 175deg Wide Angle M12 Lens. I included the Step file for your remix convenience.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
This is a quick release tripod adapter for Akaso action cameras. Akaso is similar to GoPro, but the “tongues” on the Akaso mounting hardware are thinner than the GoPro hardware. I modified the original model from tmorris9 on Thingiverse…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Tired of shoplifters? Put this up on the wall and give them a good scare! Use multi-material printing to pronounce the sign more with colours of your choice.
Print approx. €10.53–€12.87 excl. taxPreliminary estimate for one variant
First things first. I can’t really take any credit for any of this model. The hat is an awesome model that I just made bigger and added some modifiers. The only reason I’m uploading it as a model is to make it easier for other ring owners…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
💬 Summary A set of protective lens caps designed for the Samsung Galaxy S24 Ultra . These caps fit over the three main camera lenses to prevent scratches, dust accumulation, and impact damage. A simple, fast print that adds a layer of…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
You can use this mount for every camera/webcam with screw mount. This mount is for Prusa MK3S, MK3, MK3S+, MK4, MK3.9, MK3.5, MK4S, MK3.9S and MK3.5S. I printed in PLA Camera mount and screw Infill: 15% Layer Height: 0.20mm Supports: No…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
I made this model to align my cheap USB cameras for stereo imaging. It's press fit for the PCB, and enough space to add some glue to fix the cables. Distance of the cameras is 35mm. I'll add a cover plate later maybe with a strain relief.…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Warning! One user reported a crash between the camera and the extruder. This is a problem if you print big parts using the back/left part of the printer. Based on this report, I would recommend placing the camera away from the printing…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for PETGSource material: PET
Love Adafruit's Raspberry Pi HQ Camera Case ? Love the beautiful Pimoroni Hyperpixel 4.0 display? Now they can play together! This page contains the two models required to make the Hyperpixel 4.0 work with the Adafruit-designed case - a…
Print approx. €3.48–€4.25 excl. taxPreliminary estimate for PETGSource material: PET
Due to the simplicity of the model no supports are needed. I printed with PETG with 0.2mm layer size on 0.4mm nozzle. The exact material and configuration you are using do not matter a lot though I guess.
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
I wasn’t aware the M12 variant existed… I thought there was only one model of HQ camera so I was a bit surprised when I unboxed it. I couldn’t find a way to mount it to my telescope so I put together this basic design. I used some…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
I didn't know of any available adapters for these unusual lenses, so here one is! The smart little Kodak Cine-Ektar 25mm f/1.9 is the only one I have tried, but the coverage on a Four Thirds sensor is pretty good and it is quite usable. I…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Hasselblad 500 Medium Format Camera. my 500c is collecting dust … which is sad. This would be fun turned into a pinhole camera.
Print approx. €12.56–€15.35 excl. taxPreliminary estimate for one variant
Kingroom kpl1 V2 camera mount for Logitech C270 (Not sure if it will fit V1) you will need 2 screws M3 6mm 1 screw M3 18mm ****this screws was included with the printer**** I included the step file print setting 25% infill no support…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
So if you're a user of Heges or a 3D scanner that uses the TrueDepth camera you must hate how you have to hold the iPad towards the subject and not even being able to see it, well this will fix that issue, just place a 2.5mm mirror on the…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
Allows you to look around like a DJI and simply enjoy the view. Best addition to this drone I've made by far. It's a rear mounted camera with servo tilt control. Fits the OEM Cat and other similar size cameras. Requires a 9g servo and…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Easy to print middle man between HSW and Articulating RPi Camera mount system
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
Solarigraphy camera with water drain. assembly wideo by my brother: You need photopapier 10cm/15cm.
Print approx. €17.50–€21.39 excl. taxPreliminary estimate for one variant
Case to build AllSky camera using UnderWaterDome…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for PETGSource material: PET
simple camera TAPO C110 holder for Prusa mini+
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
normal, PLA, PETG, …
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
I made a Powerbank Mount for my Camera Tripod. I designed this for my Anker Power core 20100 Powerbank. Now i can easily charge my Sony Alpha 7 III, while it takes photos or Timelapse etc. The diameter of my tripod (ESDDI) is 2,4 cm.…
Print approx. €3.49–€4.27 excl. taxPreliminary estimate for one variant
Cover up the camera on an LG UltraFine 5K Display. Two sizes to choose from: narrow and wide. Use the narrow size if you would like to carefully place the cover so that the microphone and ambient light sensors are not covered up (the…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
This is a mount for the Raspberry Pi Camera to fit with a nice IKEA Stuva mount I found on thingiverse. Please note that only the part that holds the Pi camera is included. Donload the additional parts from the original creator on…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Started as Pan/tilt camera holder, this Dual Raspberry GS/HQ camera holder/mount (for Pi5) turned out to be good enough for tripod mount, without originally planned external holder. Use with two GS cameras (Global Shutter) is only…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Update: there is this improved Version of my model . I found the HiRes nozzlecam by 3DO with 4K resolution and a high quality Sony video chip on the web. A nice improvement over the standard endoscope type nozzle cams you find on Amazon…
Print approx. €1.68–€2.06 excl. taxPreliminary estimate for PETGSource material: PET
mounts in the corner of the enclosure height and position are adjustible the support fits all the holes in the profiles up side down orientation is also possible camera is secured with one m6 bolt look closely to the position of the…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
The Samsung Portable SSD T5 has proven to be an incredibly useful tool. We initially offered the 1TB & 2TB models for fast data backups/transfers; however, our customers have recently shifted to using them mostly for video footage…
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for PETGSource material: PET
Housing for CVBS/AHD camera of Mercedes Benz license plate lamp. You can use this adapter / fixture for camera, which comes with android auto headunits, as replacement of original transparent plastic in licence plate light or combine it…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
Eine Halterung Innen für die Kamera von EZVIZ C6N für die Original Enclosure von Prusa für vorne Rechts oder Links. Bei 4,4 mm habe ich eine Pause für die M3 Muttern zum einlegen eingebaut. Schrauben sind M3 x 8 für die Kamera und M3 x 10…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
This is a Z axis camera mount for the KP3S 3.0. This uses the low cost HBV-W202012HD camera module. Printer: KP3S 3.0 Filament: PLA Infill: 15% hexagonal Nozzle: 0.4mm Layer Height: 0.2mm Supports: organic, only touching build plate…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
I made a camera with detachable lens, battery and memory card for theater/shows If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
These feet will securely hold 15mm rails that are commonly used for camera rigs. I designed this because I wanted a simple overhead camera mount for making YouTube tutorial videos. I wanted something that wouldn't take up a lot of space…
Print approx. €20.19–€24.68 excl. taxPreliminary estimate for PETGSource material: PET
VeloLock – Quick Release Camera & Accessory System VeloLock is a compact, high-speed quick-release mounting ecosystem designed for cameras, field monitors, microphones, LED lights, rig accessories,... . VeloLock was specifically designed…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
Import of https://www.thingiverse.com/thing:4540545 by mikelane76 . Simple print and case that works perfectly for the purpose. Had to take a little bit of the PCB off the side of the camera from where it would've been attached to an…
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
This is a mount for a Logitech camera utilizing the empty 3mm screw hole on the X-Axis motor. Once complete you'll need a 3mm x 35mm screw to mount the camera (C170 shown in pictures) and a 3mm x 8mm screw or 3mm x 10mm to mount to the…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
