3,960 models
The makers of Diablo IV have shared their amazing 3D model with me to make one of my stop motion animations which I have adapted for print and have kindly let me share this beautiful model with the community! I can't wait to see your…
Print approx. €11.92–€14.56 excl. taxPreliminary estimate for one variant
The original author of this test contacted Creality directly to get this bed leveling test. He also created a video testing the bed leveling and showing all the findings:
Updated v2 : The box around the people was a bit off center top to bottom. It has now been fixed. After messing around with some of the other The Office signs, none of them were quite right. Here is my attempt at creating the The Office…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
ZeroG Astronaut, printed for fun or serial videos for the Mercury One! Recommended settings: 10% infill 4 Perimeters 4 top/bottom layers
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
Summary Get more than two dozens multicolor traffic cones in one print - or print them single. They also fit the 1:24 car models I have published. Sizes 1:18 = 30.5mm height 1:24 = 22.8mm height Print Print in 0.2mm layer height. No…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
- ENG - This is my first print I upload to Printables.com, it's a simple and minimal USB holder that has 8 USB slots, I didn't find anything I liked online so I created it. The USBs have an offset of + 0.4mm on each side to prevent them…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
Emergency office paper clip set You can choose from four sizes S (3 cm), M (4 cm), L (6 cm) or XL (8 cm). They're not perfectly strong like their metal counterparts, but they'll work as emergency paper clips and you can print them out in…
Print approx. €0.23–€0.29 excl. taxPreliminary estimate for one variant
Desk organizer for storing pens, scissors, sticky notes and other stuff. (W)150mm x (L) 120mm x (H) 100mm.
Print approx. €7.83–€9.57 excl. taxPreliminary estimate for one variant
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This is a remix of Cube-Maker's…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Modular design, you can achieve various sizes and functions by swapping different components - with more additional parts to be introduced later. Suggested print settings (for Prusa machines, others may need some tweaking): Layer height…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
The three interlocking gear shaped holders are held in place by a frame at the bottom. The whole office organizer is print-in-place and no assembly is required. Beside its functionality this design also shows the possibilities of 3D…
Print approx. €20.62–€25.20 excl. taxPreliminary estimate for one variant
Just an awesome abstract office gadget for you to defy your print skills and have some fun with it.
Hello, joy to the office sign. Thanks for your download, enjoy the print!
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for one variant
We all want to do it! Ball up that piece of paper and take the shot! This is not simply throwing away the trash. No! This is the moment, the game is here, now! You shoot! Buzzer rings! The trash ball sores through the air. Time slows down…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for PETGSource material: PET
Add this nice Office Accessories to your desk to store pens/pencils or whatever you wish. Designed by me - D3D Creative (Design inspired by suck uk wooden version). Main Body has two version, with and without supports. Blade is thin, I…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
A simple yet elegant and fast print Gryffindor coaster for your hot or cold beverages. Enjoy!
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
The xBloom Studio has a groove on top that allows for holding a phone. I found that it didn't quite hold my case-less iPhone securely enough. The phone would frequently slip out and fall flat, especially when using the grinder. This phone…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
M20x1.5 threaded blind stuffing to close unused M20-openings. Unused PG11-openings or PG13.5-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
This is an adapter based on the official EVVA/CES Adapter (green (1) adapter). I've only kept the holes needed for our door to improve structural integrity. However, this can be easily custimized in the OpenScad Code ( splintDiameter ).…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Just a fun project to create a door sign for a home office. Designed to be two-color printed with filament switching. Mount it on a door or wall with double-sided tape. The OnShape 3D CAD file for this is located here:…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
M25x1.5 threaded blind stuffing to close unused M25-openings. Unused PG21-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
Here you can find 4 different silhouettes of handball players as muffin toppers. The figures are approx. 9 cm tall, without the lower skewer. Please only use the muffin toppers for cooled muffins. Otherwise the plastic could bend :-) Have…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
Store up to 6 pairs of scissors with this knife-block inspired organizer. The channels measure 15.8mm x 22.8mm, make sure your scissors will fit before printing! I recommend adjusting the infill and set to your desired weight. The block…
Print approx. €17.21–€21.03 excl. taxPreliminary estimate for one variant
The castor is from the Guitel brand specifically for office chairs with a universal stem, The repair was necessary for two reasons, because some of the wheels on my chair stopped turning and the appearance no longer looked as if it were…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
M16x1.5 threaded blind stuffing to close unused M16-openings in housings. Unused PG9-openings or PG11-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
PG21 threaded blind stuffing to close unused PG21-openings in housings. [1] Thread type: PG thread [2] Diameters for PG21 opening: a) threaded hole: 26.8mm / PG thread b) drill hole without thread: 28.3mm [3] Sealing: An optional…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
Organizer for 2.5" External HDDs and SSDs – Compact and Efficient Storage Solution Keep your external hard drives and SSDs organized and protected with this custom-designed storage organizer. Built to securely hold a variety of drive…
Print approx. €3.76–€4.60 excl. taxPreliminary estimate for one variant
M32x1.5 threaded blind stuffing to close unused M32-openings. Unused PG29-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
PG11 threaded blind stuffing to close unused PG11-openings in housings. [1] Thread type: PG thread [2] Diameters for PG11 opening: a) threaded hole: 17.3mm / PG thread b) drill hole without thread: 18.6mm [3] Sealing: An optional…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
Feeling nostalgic about Microsoft Office from early 2000s? Download and print this keychains for you or give to your coworker, friends and family! Info: Microsoft Office 2000 (version 9.0) is a release of Microsoft Office, an office suite…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Needed a place to store my caffeine addiction fuel so I made this and thought to share it :3 Highly suggested to use supports, tested with 0.2mm layer height, because I wanted to make it asap, should work fine with finer layers.
Print approx. €4.61–€5.63 excl. taxPreliminary estimate for one variant
PG9 threaded blind stuffing to close unused PG9-openings in housings. (normal usage) [Extension for PGxx to PG9 adapters] For the use with PG-adapters (PGxx to PG9) with very little space between the PG9 cable gland openings, I added a…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
M12x1.5 threaded blind stuffing to close unused M12-openings or PG7-openings in housings. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for M12x1.5 opening: a) threaded hole: 10.5mm / M12x1.5 thread b) drill…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
Spielende Personen / Playing People als 1:10 Verkehrsschild. Die Rohre einfach auf der Rückseite aufkleben! Druckeinstellungen: Düse 0.4 Schichthöhe 0.1 Material: PLA schwarz blau weiß Farbwechsel bei: 0.6mm 2.1mm viel Spaß dabei!!! Edit…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
Ornate Tusken Raider Gaderffii Head Stock 1++ inch bore for inserting 1-inch dowel. A Relic Unearthed: The weathered Ornate Tusken Raider Gaderffii Head Stock, once a symbol of power and savagery, now rested amidst the carefully curated…
Print approx. €29.92–€36.56 excl. taxPreliminary estimate for one variant
PG13.5 threaded blind stuffing to close unused PG13.5-openings in housings. [1] Thread type: PG thread [2] Diameters for PG13.5 opening: a) threaded hole: 19.1mm / PG thread b) drill hole without thread: 20.4mm [3] Sealing: An optional…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Fatty, Peter Griffin for an exhibition or diorama. Very nice figures. It is suitable for coloring. My children absolutely love it :-). Important: If by chance…
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
Officer Earl Devereaux From Cloudy with a Chance of Meatballs.
Print approx. €7.67–€9.38 excl. taxPreliminary estimate for one variant
PG7 threaded blind stuffing to close unused PG7-openings in housings. [1] Thread type: PG thread [2] Diameters for PG7 opening: a) threaded hole: 11.3mm / PG thread b) drill hole without thread: 12.5mm [3] Sealing: An optional TPU-sealing…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
This model fits the Prusa i3 mk3 / mk4 build beds in the horizontal orientation. Easy print, no supports needed. I used PET-G but you could do it in PLA
Print approx. €13.17–€16.10 excl. taxPreliminary estimate for PETGSource material: PET
Recently I restored some old BRIO wooden railways to gift to a friends kids. The railway crossing lost one of its traffic barriers, so I measured and redrew the remaining one in FreeCAD. Printed it twice in ABS, sanded, and finalised in…
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
PG16 threaded blind stuffing to close unused PG16-openings in housings. [1] Thread type: PG thread [2] Diameters for PG16 opening: a) threaded hole: 21.2mm / PG thread b) drill hole without thread: 22.5mm [3] Sealing: An optional…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
PG29 threaded blind stuffing to close unused PG29-openings in housings. [1] Thread type: PG thread [2] Diameters for PG29 opening: a) threaded hole: 35.5mm / PG thread b) drill hole without thread: 37.0mm [3] Sealing: An optional…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for PETGSource material: PET
Intro: With this mod you can feed filament over the top of the Prusa XL original enclosure without the need of drilling holes to the metal sheet. You have to drill the top acrylic plate which is replacable…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Supports: Yes Resolution: 0.2 mm Infill: 15%-20% Brim: No Printed it with my Bambu Lab X1 I took the STL File of the Frog King cut off the crown and took the STL File of the Police Hat a put it on top. Made it in my CAD.
Print approx. €5.18–€6.33 excl. taxPreliminary estimate for one variant
M40x1.5 threaded blind stuffing to close unused M40-openings. Unused PG36-openings in housings are also possible to close with this blind-stuffing set. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET
Traffic cones are too big to fit on your desk so why not make some model cones for decoration or play? These 52 mm tall models stack together like real cones. There are three models ready to print. First, the snap together multi-colour…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
Toy traffic cones in two different sizes. smaller one is 110mm high and larger cone has a height of 200mm.
Print approx. €2.21–€2.71 excl. taxPreliminary estimate for PETGSource material: PET
The official Sovol SV06 strain relief is a great foundation for anyone looking to customize their cable management system, and while it may not fit all individual needs, it's a great starting point for modifications. It's worth noting…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
If you are advanced at making models tell me what sofware you use.
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
You can hang this flower pot on the side of a office cubical shelf.
I am a massive fan of The Office and love the big cuddly loony tune Dwight Schrute and his 40-acre beet farm. LOL. I have already watched the series three times and don't know why because some things aren't that funny anymore. However,…
M50x1.5 threaded blind stuffing to close unused M50-openings. Unused PG42-openings in housings are also possible to close with this blind-stuffing set. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for PETGSource material: PET
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for (1-3)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
I use this CO2 diffusor since some years in my 120cm tank. The water outlet on the top connects directly to a Juwel Eccoflow 500 pump head. In my tank, the diffusor and pump is installed behind a edge mounted hamburger mat filter. Outlet…
Unleash the functionality and convenience of 3D printing with our free, custom-designed micropipette holder featuring integrated magnetic inserts. This holder comfortably accommodates 4 magnets of 6x3mm each, ensuring your micropipettes…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
This will allow you to mount a 120 mm fan above your PCI slots for extra cooling. I use a 2mm bolt to attach the bracket to the case as that is about the size of the slots on the case. The bracket will accommodated a fastener that is up…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Items needed: 1 x Raspberry Pi Zero W 1 x Raspberry Pi Camera module 3 Wide 1 x Raspberry pi Camera Cable (300mm) 1 x Filament of choice 4 x M2 screw (15mm) 4 x M3 screw (10mm) 5 x m4 screw (16mm) 1 x MicroUSB Cable (Length is up to you)…
Print approx. €6.58–€8.05 excl. taxPreliminary estimate for PETGSource material: PET
PG42 threaded blind stuffing to close unused PG42-openings in housings. [1] Thread type: PG thread [2] Diameters for PG42 opening: a) threaded hole: 52.5mm / PG thread b) drill hole without thread: 54.0mm [3] Sealing: An optional…
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for PETGSource material: PET
PG36 threaded blind stuffing to close unused PG36-openings in housings. [1] Thread type: PG thread [2] Diameters for PG36 opening: a) threaded hole: 45.5mm / PG thread b) drill hole without thread: 47.0mm [3] Sealing: An optional…
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for PETGSource material: PET
PG48 threaded blind stuffing to close unused PG48-openings in housings. [1] Thread type: PG thread [2] Diameters for PG48 opening: a) threaded hole: 57.8mm / PG thread b) drill hole without thread: 59.3mm [3] Sealing: An optional…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for PETGSource material: PET
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: Printed Face Up: No Printed Face Down: Optional Print Orientation: Optional : Face down when printing on a textured build plate provides a nice texture.…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Dive into the world of de-icing with this unique windshield scraper! Inspired by the robustness of a backhoe shovel, this scraper is designed to tackle the toughest winter conditions. Its ingenious design offers an extended de-icing…
Print approx. €7.01–€8.56 excl. taxPreliminary estimate for one variant
No supports ? Yes, no supports. So this is one of my first model that i made. A Bell worker that i know wanted to show the cool things 3d printing can do so i made it for him. Since this is a big brand logo don't sell it. Like, i am not…
Print approx. €3.84–€4.69 excl. taxPreliminary estimate for one variant
M63x1.5 threaded blind stuffing to close unused M63-openings. Unused PG48-openings in housings are also possible to close with this blind-stuffing set, but the opening must be widened to >63mm for the blindstuffing to fit. [1] Thread…
Print approx. €3.49–€4.26 excl. taxPreliminary estimate for PETGSource material: PET
PG21 threaded blind stuffing to close unused PG21-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
Apple (IMHO) really lacked in the design of its remotes. You can't tell which way is up, and they're hard to hold and easy to lose. This causes us to lose our AppleTV remote all the time. It slides under the table, gets lost in sofa…
Print approx. €10.25–€12.53 excl. taxPreliminary estimate for PETGSource material: PET
The model consists of two parts: The sleeve that interfaces with the flashlight body and the cone itself. Print the sleeve normally. Print the cone in vase mode. Permanently attach the two parts together using CA glue. The model was split…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple double hook/hanger, that has enough enhancements not to break, for a coat and a handbag. Hang it on top of a door or an office divider. Make sure you have clearance above the door to the door frame, if you need to close…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
small stackable traffic cone. Dimensions 50x50x50mm
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-4)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for PETGSource material: PET
Introducing the Hextainer , a sleek and versatile modular container designed to bring both style and functionality to your office space. With its unique hexagonal shape and customizable inserts, the Hextainer allows you to organize your…
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
Pull the metal stud out of the wheels and press into the feet. Printed with: 0.15mm layer hight, 6 top and 5 bottom layers, 30% infill and 3 parameters.
Print approx. €9.18–€11.22 excl. taxPreliminary estimate for one variant
PG21 threaded blind stuffing to close unused PG21-openings in housings. Adapter for 1xPG7 cable gland for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffing with PG7-thread. [1] Thread types: PG thread…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-3)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for PETGSource material: PET
This is a remake of the card holder made by Jundy. My wife has some Daily Affirmation / motivational cards that needed a new box for. I found a free dxf file for a mandela design that I thought she would like and added it to the lid.…
Print approx. €3.22–€3.94 excl. taxPreliminary estimate for one variant
PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-4)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…
Print approx. €1.70–€2.07 excl. taxPreliminary estimate for PETGSource material: PET
See my "Awesome Office Door Sign" model for description on this model. Please review the included READ ME doc. for further printing info. Please post your make with the “Post A Make” button (below the “DOWNLOAD” button) on this page :D
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for one variant
PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-4)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for PETGSource material: PET
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-6)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for PETGSource material: PET
Watering hole stuffing for Savic Rody Cavia cage (70 x 45 x 31 cm), it is originally for guinea pigs, but also can be commonly used for hamsters. We have faced the problem with biting the plastic around the watering holes so I designed…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-5)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
Best be printed in PLA to nail the overhangs from the tire studs. No support needed in this case.
Print approx. €2.60–€3.17 excl. taxPreliminary estimate for one variant
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
Print approx. €1.04–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
No need to give that awkward wave in the rear view mirror. Thank the driver behind you with the push of a button. What if you have no choice but to cut into another lane to make the exit ramp? End the potential road rage from the person…
Print approx. €1.57–€1.91 excl. taxPreliminary estimate for one variant
Lisca di pesce per avvolgere vari cavi. Stampato in PLA in 45 minuti riempimento al 10%
PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-5)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
Print approx. €1.68–€2.06 excl. taxPreliminary estimate for PETGSource material: PET
Insect coffin
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Once again, I am trying something new. This time, how to create 3D models using AI. Steps: I asked ChatGPT to generate 2D images of a rat leaving a sinking ship (company). Prompt: "Generate an image of rat leaving the sinking ship.…
Print approx. €14.25–€17.42 excl. taxPreliminary estimate for one variant
Organize your workspace in style with this minimalist pen stand, designed for quick and easy 3D printing. Printed in vase mode on an Ender 3 in just 45 minutes, this design is perfect for anyone who wants a fast, functional, and…
Un panneau avec lettrage en relief, à mettre au pied d'un plant de sauge officinale (sage), avec le nom scientifique en dessous. Print instructions EN: Print the layers from 0 to 1.5mm in one color, and the layers after that in another…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Welcome! Again, probably a specific problem being solved here but if it helps you; Cheers! I have a convertible stand up desk in my office cube. Varidesk I think? And with multiple monitors the laptop was just in the way. Luckily the cube…
Description This model is designed to work with my holder design for a customizable office nameplate. Print 2 feet, and insert into the nameplate holder to use it on a desk, rather than a wall mount. Recommended print settings: Material:…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Het gaat om een klein pinnetje van 5.5mm doormeter en 20mm lang. Stelt dus echt niets voor, maar mijn koffiezet werkt weer. Tijdens de afwas is het steun pinnetje afgebroken dat de koffiefilter op zijn plaats houd. Ik heb dan waar het…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Decorative Griffin Vase
Print approx. €16.09–€19.67 excl. taxPreliminary estimate for one variant
[Update] ---2025/01/21--- Ultra size cat released!! It is about twice as long as Extra size and looks like a dragon, so looong! This is a super long version of “Flexi Holding Cat” which was previously released. Since there were many…
Preening (Puffing) Raven Added version with thicker legs. (11.3.2024)
Cruiser USS St. Louis No supports needed Little to no glue Dozens of details & elements In-game St.Louis cruiser included World of Warships and Printables have joined forces to bring one of the most detailed models of a famous naval…
Custom-engineered for optimal performance-to-noise efficiency in use with the Noctua NF-A12x25 fan. Carefully optimised to ensure smooth pressure gradients as the fan blades pass the radial struts, resulting in higher airflow performance…
![[Official Remix] Flexi Extra Size Cat (Print-in-place)](https://media.printables.com/media/prints/1146999/images/8658584_808cb494-2549-4a42-b5ae-72f60e7726bc_9fdfc9b3-37cb-4725-a000-bcc358fe757e/extra-size-cat-1-2.jpg)
