Counting matching models…
31.12.2024 Version 3 is now available! It features an 8-round magazine, stronger spring, easier printing of bridges, stronger lever! Check it out here: https://makerworld.com/en/models/934485#profileId-899040 Version 2.0 is released!…
A 12 gauge shotgun shell, also known as 12ga or 12G shotshell, is a centerfire shotgun cartridge. Centerfire shotgun shells were designed in the mid 1800s. Includes 4 lengths: 2 3/4in (most common, 2.75in, 61mm), 3in (67mm), 3 1/2in…
Simple, single 12 gague shotshell holder to give sporting shooters that one last round to complete a stage (when you miss that last critical shot - we've all done it!). This is a remix based on glompos21 design on Thingiverse. I've…
Since I always get asked if I 3d print guns... I decided to design a rubber band gun (for Anna). You need: 8 times M4x10 screws 2mm diameter metal pins: (or 2mm thick nails) 3 times 25mm long 2 times 10mm long Download the barrel from:…
Hotshoe cover with Fuji X logo. Measured and tested on my X-T20, but should fit practically any hotshoe on any camera.
A simple drive bay for 4 Dell 3,5" LFF HotSwap HDD caddys. The SATA/SAS Connetion at the back is not mounted, the rear of the HDD is exposed to plug in manually. Fits a 120mm Fan on top for cooling Printing orientation: on its "back" with…
Model Quick and easy Magazine Extension for the great Disc Shooter from uhltimate . With the extension the Shooter could shot 12 rounds in a row. The magazine Extension is a snap-fit part. Simply slide over the original shooter, it holds…
Did you also make the mistake of buying a Rosewill RSV-4412 server case or RSV-SATA-Cage-34 panel-mount case? If so, did you realize Rosewill doesn't sell spare disk caddies? If not, did you notice how flimsy the sleds are, and how…
Produktbeschreibung: Die Schnapskrake ist der ultimative Party-Booster für Freunde der gepflegten Runde! Mit diesem innovativen Shot Dispenser, ausgestattet mit 5 Auslässen, wird das Einschenken von Shots zum Kinderspiel und zum Erlebnis.…
Various designs for a HotShoe-Cover suitable for Fujifilm cameras. I have taken the dimensions on my X-T4.
UPDATES : 29/09/2024 : Vial file “big_num_vial.uf2” added. ____________________________________________________________________ Context: BigNum is part of a series of projects I've recently started, all focused on custom mechanical…
About the Model This is a highly accurate, reverse-engineered replacement part for a HotSpring cover lifter pivot joint . The original injection-molded factory parts are notorious for cracking or snapping over time due to constant torque,…
I wanted a plate to put Kailh Choc switches and hotswap sockets into for a small project with a Raspberry Pi, but I couldn't find anything that suited my needs. I love mechanical switches and hope to use them in many projects requiring…
I recommend printing perpendicular to the printing plate, it will preserve more details and the layers are not so visible, at a low layer the time is longer, but the details are more beautiful. So far, the print with Pla Prusament silver…
We have the option either use 2 mm steel pins, which need to be hammered in, or ream the holes to 2.5 mm and screw in M3. If you want a nicer finish you can remove the thread from the screws 6 x M3 8 mm can be longer at most they will…
Canon hotshoe - Action camera mount (GoPro, Insta360,...)
A 5 shotshell holder for my MMS collection of mounts. This can be used with any of the Belt Modules found on my profile or with any other capable mount using Picatinny. This module is designed to be held onto the belt module by tension,…
Updated 12/31/2025 Added 2 styles of holders. Vertical and flat. I printed the vertical and painted some areas black for the soccer ball. The flat version should be fine with the coasters loosely fitting inside. The Lilywhites! or Spurs!…
A 20 gauge shotgun shell, also known as 20ga or 20G shotshell, is a centerfire shotgun cartridge. Centerfire shotgun shells were designed in the mid 1800s. Includes 2 lengths: 2 3/4in (most common, 2.75in, 62mm), and 3in (68mm). Note:…
not perfect but they hold the shells for hand reloading. i put supports on for the eased edges. takes about 2 hrs to print.
This for trimming off the crimp from a 12 gauge shotgun shell. It uses common utility knife blades. Reverse them and use the other side when it gets dull. It should cut off the crimp about 4mm from the end. Use 3mm screws and nuts for…
This is a screwable or gluable wall mount for mobile LTE / 5G wifi hotspots / access points with an additional slot for the battery. Features: charging slot in the middle on the bottom display is visible (turn device around if you don't…
Mount a Gopro to your camera. With screwhole for Gorpo screws. Compatible with all gopro mountable actioncameras.
A .410 bore shotgun shell, also known as .410 shotshell, is a centerfire shotgun cartridge. Centerfire shotgun shells were designed in the mid 1800s. Includes 2 lengths: 2 1/2in (most common, 2.5in, 60mm), and 3in (72mm). Note: Shotgun…
Adapter for mounting SSDs in existing 3.5" server hotswap bays that has some sort of bottom support. Tested on Dell, HP/HPE old-style and HPE “smart” -carriers. Use 3 of the original screws to fasten the adapter Insert the two small pegs…
You need one M5 nut, one 3D-printer and some fillament. No suport, brim or cat.
Battle Shots alcoholic version of the battle ships game. draw the game surface like for a classic battle ship game, fill up shots, place it in the ships and the game can begin. Print : 4x ship 2 2x ship 3 2x ship 4 2x ship 5 (Ship 4…
The logo can be resized as desired - when resizing, do not scale the z-axis. It's designed to be printed at 0.2mm layer height. Use pause at layer to swap colors. The first 3 layers are in white, the last 3 are in dark blue (I did mine in…
A vinyl cutter attachment for a 3D printer needs to have two key features: Spring tensioning to compensate for bed level issues (You can never get a 3D printer bed as flat as a Cricut or Silhouette cutting area) A very snug fit for the…
Enclosure for a 3.5" Nextion Display, Raspberry Pi Zero W, MMDVM Hat modem, stub antenna and TTL. If you want to use some of the more advanced touh screen software displays you will need a USB TTL (I recommend the FTDI ones) which will…
TinyMtn Free Pack 11 - Himalayas This is a package with sets of 3D model files for four high mountains in the Khumbu Himal. Everest / Lhotse, 8849 m / 29,032 ft Kangchenjunga, 8586 m / 28,169 ft Makalu, 8485 m / 27,838 ft Cho Oyu, 8188 m…
Shotgun shell cards used to hold 6 shells that can be attached to most shotguns with hook and loop tape (Velcro). If desired you can also place a loop of paracord to allow you to quickly rip these off the side of the shotgun and replace…
Shotgun shotshell reloading trays for 16 gauge, 20 gauge, 28 gauge, and 410 bore. I couldn't find any small bore reloading trays out there so I made some for my reloading hobby. These are useful for reloading to keep the hulls stable and…
This is a thumbgrip for a Sony Alpha 6000. It dosn't obstruct the mode dial. You might need to file the print on the underside to get a good friction fit. Print on the flat side, with supports.
Remixed the original "giant powder funnel" to accomodate MEC loaders where one bottle is shorter than the other (like the stock photo uploaded). Chopped off one side with a flat surface. (Sorry for the poor quality photo of it in-use. My…
This keychain has been meticulously designed and manufactured using the most advanced 3D printing technology, ensuring exceptional quality and precise details. You can choose between two high-quality materials: PLA or PET-G, both…
INTRODUCING THE TACTI-SHELL FOR ALL YOUR SHELL HOLDING NEEDS Three pieces, print and glue together. Holds 4 shells, which can be oriented either direction based on preference. Designed to prevent shells from falling out while playing…
I liked the idea from pdub77 https://www.thingiverse.com/thing:3752780 But it doesn`t fit on my Sony cameras. So i remodelt the hotshoe and added bit more space for the Wirelesss GO. Thank him his work with a Like! Category: Camera
This is an alternative body and wing for the 1/10 RC model kit TAMIYA Hotshot (1 & 2). Printing I recommend using PETG as the material for printing. PLA is quite rigid and may be too brittle for the rough RC environment. The printing…
A case for the dumbpad (hotswap RGB edition) providing a full enclosure with a slight angle. The top cover must be printed upside down with support enabled. All other parts can be printed without support. No screws required. Self-adhesive…
Two variations: a separate version to attach to an “M3 insert” of the honeycomb wall an integrated version, for a horizontal mount
Introducing the new 3D printable bar shot mat, designed to keep liquids in place on your bar. This is perfect for bartenders, mixologists, and anyone who wants to keep their bar area clean and organized. The bar shot mat is made from any…
MMDVM CASE for some taobao MMDVM board The antenna very near OLED screen minimax dimension,simplest 3D part and easy to print Category: Electronics
11/24/25 Update - Added 2.75 inch high brass, 2.75 inch low brass and 3 inch high brass iterations. The 2.75 low brass even has an 8 petal crimp. I was doing some mid-season organization of shotshells in my ammunition cabinet, and started…
Mount your Kodak Charmera on a hotshoe. Access the USB-C port on both versions while the Case only version also has SD slot access. Supports optional, but recommended for the best finish around the button access.
A little adapter to convert the standar hotshoe mount (Canon, Nikon, etc) to a standar tripod 1/4 screw for cameras. V2 has a stronger structure Category: Camera
A handheld tamping tool used to manually seat a wad in a shotshell hull during hand loading. Also useful to tamp down layers of tight-fitting buckshot within the wad/hull. The Shotshell Wad Ram is a two-part design with a threaded handle…
Abandonware. It might get some info later but for now here we are There are 2 versions, a flush mounted version and a version that is about 15mm deeper(setback). Either way, print one of each SideL,SideR,LatchRail,SmoothRail,Backplane.…
I adjusted it for the camcorder. So I redesigned the hotshoe and added a little more space for the Wirelesss GO II. Thank him for his work! Upravil jsem to pro videokameru. Takže jsem předělal hotshoe a přidal trochu více místa pro…
This is a simple, yet practical mount to fix remote triggers to a Hasselblad 500x or 503x Body. It can be put onto and removed from the camera very quickly and is sturdy enough to hold bulky studio-grade remote triggers. Print in 0.15 and…
MMDVM based HAM radio hotspot. See original project description and differences section (below on the page) for this project. Using https://www.pistar.uk/ software. Note - solder JP1 pins on hat together to be able to upgrade hat firmware…
Case for a MMDVM hotspot board and raspberry pi zero. I used eight M2x8 screws to hold the case together, with four printable spacers. Thanks for checking out my model I hope it helps you, if you enjoy it and want to support me please…
Simple 12 Gauge shotgun 5 shell carrier. Use strong double sided velcro for attachment. Recommend printing vertically at 100% infill for strongest results. The design allows for sliding shells down or popping them out of the carrier…
i redesign it to fit my need -add another wing to the knob -change hotshoe -remove holder assamby Category: Camera
Belt holder for your ammunition cartridge box for trap shooting etc. Added a paddle style belt adapter (Tek-Lok). Idea based on https://www.thingiverse.com/thing:1672155 , however made it Bladetech Tek-Lok compatible. Printable Tek-Lok…
Designed to fit a Raspberry Pi 3b and a mmdvm single hotspot. Hole for a 30mm fan on one side. Air vents keep the rpi running at about 35C in my set up. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Protection cover for Canon Speedlite series' hotshoe Successfully tested on: Canon Speedlite 430EX III-RT Canon Speedlite 470EX-AI Canon Speedlite 600EX II-RT
This hotshoe cover is designed to protect the small pins on your camera's flash mount from dirt and potential damage. It is a quick (less than 5 minute) print without the need for supports or post processing. Printing Instructions 1x wall…
The Netgear MR 1100 hotspot gets hot very easily, and shuts down. This Cooling case is designed to keep it cool even when under heavy load. A small 40mm noctua fan is attached to the bottom of the case and is powered by the USB A output…
Picatinny mounted 2 shotshell holder PETG recommended 100% infill 3 walls 3 base and top layers Supports Normal (snug) 30 degrees Needs: 30mm M5 bolt and M5x0.8mm nut
machine translation I would be glad to hear your opinion about this model. This model is intended for use as a mounting socket for a mechanical mx/choc switch. It is recommended to use this model in large assemblies, for example, modeling…
Fully functional hotswap drivebay for 2.5" SATA HDD/SSD. Compatible with usb sata adapter. Locking pin is printinplace. I made this for a larger rack-mount rpi project, so the outside dimensions don't fit any standard 3.5" or 5.25" bays.…
Source: https://drive.google.com/drive/folders/0B5j1iQ1NUCTcak1KRU8zWFZpQjQ Category: Models
This is a remix of a 12ga 2 3/4" shotshell I found on Thingiverse (https://www.thingiverse.com/thing:5276446) by Ross2K. I don't have a Thingiverse account, and I can't find Ross2K on Printables, so this is the best way to give him…
Hier liefere ich euch ein Gehäuse für einen einfachen MMDVM Hotspot auf Basis eines Pi Zero’s in Verbindung mit einem Duplex Modem. Achtung, dieses Gehäuse ist nur kompatibel mit den neueren Modem-Platinen ab Version 1.3, da diese Boards…
Improvements Version 2 is a redesign with the feedback I've received on version 1 over the past year. Some of the improvements made are: Back plane support (28mm, 29mm or 30mm) Hot-swap snap fit, as opposed to the heat set insert mount of…
HOTSHOE to HOTSHOE with locknut Category: Camera
I liked this small ball joint from diezopfe much and want to make me a small ball mount for my camera hotshoe from it. +++Use a brim on the screw for better adhision+++ https://www.thingiverse.com/thing:4739696…
I don't care for the hotspots from the leds showing through the front panel. So I added a small piece that goes on top of the acrylic on the inside of each panel. Makes the light section a little bit smaller than the original, but it…
Holds Kailh choc v1 switches tightly. If you find that the hole is too tight, adjust the inner square hole to 13.7mm.
10 inch Hotswap Drive Bay for Mounting up to 8 2.5" SSDs in 1U. SSDs can be up to 8mm thick (Some slim HDDs should also work). 8 SATA connectors with Cables oder 8 SATAto SATA Adapters (see last two Pictures) can be pushed in the back and…
A simple adapter that allows an accessory wanting to mount via hotshoe to be tripod mounted. The main hole is threaded for standard ¼ x 20 tripod threads. The side lock uses any M3 bolt. I printed in PETG for strength at .2 layer height…
Simple hotshoe covers remixed from metalsepp for film cameras to remember what type of film stock is loaded: Colour (RGB), or Black and White (BW) Also included blank STL if you just want a basic cover and CAD file for your own customizing.
I'm a fan of Tottenham Hotspur! I wanted a White Hart Lane sign & I'm too cheap to buy one! I printed this in PLA and changed filament around level 38 to 40. I know it isn't the correct blue, but it is what I had on hand! I hope you…
Changelog: v1.2 2023-04-07 removed all STL files from previous versions added optional zip tie hole to the back cover so the power cable can be secured (no sharp corner there, too) unified front cover (fits now every Raspberry Pi)…
Small adapters are lifesavers, anytime. This adapter screws onto a ¼ inch camera mount and converts it to a hotshoe. So now you can attach all your hotshoe accessories to any camera mountable tripod or stand. I needed to mount a LED light…
Just a mounting plate you can slide into a hot shoe wherever you want and screw something on it like a phone grabber.
3D printed storage container/holder for Hot Shots EDT. Keeps the bottle out of you truck by securing in the bed.
About this model: This has been modeled for the Netgear Nighthawk M6 (MR6110) It is a simple snap fit outer case, made from PLA, PETG, or whatever filament you like. There is an inner “sleeve” designed for TPU. I mimicked basic phone case…
This is a Custom Hotshoe Grip i made specifically for my Canon EOS M, since its kinda ass to properly grip, especially with magiclantern. Thus I created this small thingy, took about an hour and 5 Iterations but it works now. I added a…
Just print parts 1-3 with something that doesn't easily melt (TX easily gets to 85°C), clip the TX on the bottom 20mm bolts, insert the antenna from above and connect it. Then glue the top plate to the bottom and then the cam holder on…
Case and lid for the MMDVM_HS_HAT_DUPLEX MMDVM dual/duplex pi hat that doesn't have a USB port on it. Suitable for this specific board: https://www.amazon.com/dp/B0878WF7HW There are two versions of the main part of the box - one has…
Meet "ShoeBuddy," the suave connector on the block, ready to tie the knot between your cold shoe and any rig or gadget with a 1/4-inch hole. Crafted with precision (and a dash of flair), ShoeBuddy is the perfect matchmaker for your…
A cover for the hotshoe connector on Pentax cameras.
This 3D model is designed to hold small shot bottles, such as "Kleiner Klopfer," "Gaudimax," or similar bottle sizes. It accommodates bottles with a diameter of 35mm and a height of 95mm. The holder provides space for up to 12 bottles,…
Picatinny/1913 rail sidesaddle holder for 5x .45LC or .410 Shotshells. Designed for the Rossi Brawler, but should work with any rail-equipped firearm in .410 or .45LC. Print 1x of this model, and 1x “smallside” from the original. 1x M3…
Are you a person that refuses to use the built-in screenshot functionality of every computer on the planet? Do you prefer to take pictures of your computer screen with your phone because… what does the PNT SCR button do anyway? YES? But…
Part to adapt 5/8"27 Threads to a HotShoe Mount Made this part to be able to use my portable flash with a microphone boomstand. Converts the 5/8" thread of the mic stand to a hotshoe, very simple. Help me out Using the affiliate Link…
This design fits a standard 80mm computer fan into the middle chassis fan slots in a SuperMicro CSE-846. I designed this so I could replace the case's loud factory fans (part number FAN-0127L4). Note that the fan can be oriented either…
Note: Print the model standing for smooth surface
Update: 8 slot rail is now filled. ----------- Scope can't depress far enough? Use 1.5 degree down angled rail. My Zius BK-1S throws darts at 50 m/s (165 fps). At 10 meter range (33 feet) I experienced 20 cm (8 in) freefall drop, which is…
After removing a bunch of keys I didn't like how it left the hotswap sockets open and all exposed. Whipped up this quick and simple model, which I'm very pleased with. I suppose it really comes down to how well your printer is calibrated.…
A case for a Jumob MMDVM dual hat for raspberry pi Zero and a OLED 0.97" screen. The screen is mounted on the lid since many of the screens out there have swapped VCC and GND from what the MMDVM card expects. Needs some M2 and M3 bolts to…
This is a block that can be slid into the strum switches housing to house kalih MX hotswap sockets. I don't like soldering to the tiny pins so this instead gives a bigger area to solder as well as the ability to hotswap strum switches.…
I needed a stand for my new Aputure light Print instructions Category: Camera Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: .2 Infill: 10% Filament: Popbit Tough PLA Red
Plate using outemu hot-swap socket holders to make a handwired hot-swappable Mechanical Keyboard Numpad m2 screws hold the sockets in printed at .3mm layer height
