Counting matching models…
Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…
This simple holder for the Xiaomi Mi Power Bank 2C 20000mAh can be mounted on the well known IKEA SKADIS pegboard. Model created with the help of https://www.printables.com/pl/model/194183-skadis-universal-hook-adaptor-blank and universal…
Cool and ergonomic stand for a popular smart watch Xiaomi HAYLOU Solar (LS05). The stand can be printed with or without supports. For this, several options for STL files are provided. ls05-A.stl and ls05-B.stl - are not require support.…
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Držák na stěnu pro automatický dávkovač mýdla od Xiaomi.…
Here is a mobile phone holder for the Xiaomi Mi10T Lite 5G with the original protective Cover that came with it. The Photo shows an early attempt. Now it´s slightly improved. Now the lettering is only punched. Created with Tinkercad.
I recomend glue on Bed for Flex and PETG. It helps alot!
WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the PETG versions of the case) which has…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO ESP32C3, an Arduino & CircuitPython capable RISC-V board with Wi-Fi, Bluetooth and USB-C that comes with an antenna and costs $4.99. The product page for this device can be…
Updates 13/07/2024 - Added bottom with holes 05/10/2023 - Added filet to the case ---------------------------------------------------------------------------------------------------------------- Case for Seeed XIAO ESP32-S3. Used STEP…
inporved design for a phone case for xiaomi redmi note 11.
This is a simple case for the Seeed Studio XIAO-ESP32-S3. It has an option with an extra plank that you can stick the external antenna onto. The lid snaps on without any screws or glue. This is an initial model for basically the device…
Переходник - крепление для камеры Xiaomi Mi Home Security Camera 360 Adapter - mount for Xiaomi Mi Home Security Camera 360 Category: Camera
Seeed Studio XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and…
Seeed Xiao BLE snap fit case with reset button, designed to be used as a dongle/central device for ZMK Firmware. Updates 06/01/26 - removed unnecessary features, small tweaks; added step files 10/12/24 - added ejecto 🚀 hole for easier…
my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.2 - 0.28 Walls: 3 Infill: 10% Material: Brand: Kingroon Material: PLA Color: green printed on Artillery Sidewinder X1
A simple tabletop stand for your Xiaomi Mijia thermometer 🙂 Printed in Hatchbox PETG (No supports required)
Xiaomi Redmi Note 12 case with differents models
This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…
Snap-fit case for Seeed Studio XIAO ESP32S3 UPDATE: Added STEP file for the model for future improvements and modifications by the community. Please respect the CC Attribution Non-Commercial license. Features: Snap-fit case, no additional…
Угловое крепление к стене для камеры Xiaomi Mi Home Security Camera 360 Category: Camera
Tube Case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html Print Settings: PETG 0.2mm layer 4 walls 15% infill add support on everything…
Originally published here: Xiaomi Redmi Note 8 Pro m1906g7 case by tato_713 - Thingiverse This case is for the phone Xiaomi Redmi Note 8 Pro , which model number starts with "m1906g7", it will not work with Redmi Note 8 T or the regular…
I needed a support for the new Mibox S (which is a bit slimmer than the previous version), so I modified NirDobovizki's design ( https://www.thingiverse.com/thing:2754331 ). Print instructions Category: Organization Summary I needed a…
The Xiaomi 13T already comes with a clear bumper case out of the box, but I wanted to give it a more personal touch. So, I designed this custom case. The case can be printed from TPU with a Shore hardness of 95A or more. The frame around…
Seeed Studio XIAO ESP32S3 Sense leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB…
The box is made of 3 parts and the cover and carrier are universal for whatever base will be used. The base is specific designed to house an LD2410C sensor.
This is a lid of a Xiaomi Mi TV Stick's remote. On mine the little nozzle on the front broke off so i had to make this for me. Print it standing up on the flat tilted back part to get the best results. (Lay this flat part on the printbed)…
Because I couldn't find any stl file for a phonecase for this phone I disigned my own. It is not perfect but it works.
COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models except remixes i made from others work. https://www.patreon.com/Dengamleninja
Seeed Studio XIAO ESP32-C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivities. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.…
Remixed with the intention to use the Xiao Sense camera as a facial tracker with Project Babble.
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO nRF52840, which is an Arduino & CircuitPython capable Nordic nRF52840 board with Bluetooth 5, BLE and NFC that comes with an onboard antenna and costs around $9.90. The product…
Holder for Xiaomi Wiha screwdriver set to attach to Ikea Skadis pegboard
(Description from original author) WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the…
I put my security camera on a tall closet, but I couldn't see the whole room, so I made a 20° support to compensate the missing angle. All you need is the two printed components and 2 wood 3x16mm screws. Note: the lock has 4 holes in…
This device is based on XIAO ESP32S3 and Wio-SX1262 LoRa module, making it the smallest Meshtastic Device, LoRa Sensor Node or a One Channel LoRaWAN Gateway. Coupled with an exquisite 3D - printed casing, it is equipped with an 868 -…
Case for Small RP2040 Boards This is a case for the small RP2040 boards such as the Adafruit QT PY RP2040 or the Seeed XIAO RP2040. These small boards based on the Raspberry Pi RP2040 microcontroller. They have a USB interface and are…
Originally published here: Xiaomi Redmi Note 10 & 10S m2101k7 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention…
It's a wallholder, it adheres to the wall using doublesided tape. Edit 2024: added a hole for a thumbtack.
Rebuild from @Thomas_63847 model
In tested scenario scooter stands on front tire. Short-term testing proved it's able to hold scooter lifted. Printed in PETG with 60% infill, 0.2mm layer height. Compatible with: Mi Scooter 1S Mi Scooter 2 Pro Mi Scooter 3 M365 Pro (use…
This is a strange use case: use a traditional vacuum cleaner to clean a robotic one. The official robot cleaning guide says you have to clean the dusty filter with tapwater. If you do so you close the pores of the filter by creating a…
If you're looking for a place for your remote to wait for you - you found it :) This little stand is designed for the Mi Box S's remote. The shape follows the remote's design and matches the box's appearance as well. The remote stands at…
This 3D-printed case is designed to complement the Xiaomi 13T Pro with a snug fit and minimal aesthetic. Every detail is optimized for easy access to buttons, ports, and the camera while offering reliable protection. Features: Precision…
Originally published here: Xiaomi Redmi Note 9 Pro / S case by tato_713 - Thingiverse This case is for the Xiaomi Redmi Note 9S and 9 Pro, but not for the Redmi Note 9 (it's a bit wider). Some of the models are designed for rigid…
WHY? The existing AMS dryer pods by STprinting are great for the outsides. For the middle slot, I needed something to fit my Xiaomi Mija Hygrometer , of which I had a couple lying around. UPDATE v2 Based on your feedback, I strengthened…
Replacement Bracket for Xiaomi 360 Camera Supports are needed, as you can see in the photo. Remix of: https://www.thingiverse.com/thing:4485916
A camera case for the Xiao ESP32S3 Sense to use it as a printer camera. The housing is designed so that as much air as possible can flow through and the ESP32 does not heat up too much. Additional Materials 4x Screw M3X8 There are…
A compact tube-style enclosure designed for the Seeed Studio XIAO nRF52840 & Wio‑SX1262 Kit . This case is suitable for portable Meshtastic or MeshCore LoRa nodes , powered by a single 18650 Li-ion battery. The cylindrical design protects…
If you want to put it on a slightly curved surface (for example, the back of a monitor/tv), use the thicker foam tape, and just attach a strip on each edge of the back.
The bracket features 2x 4mm mounting holes for screws to mount the bracket to a wall. There’s a hole underneath the camera for a standard ¼” screw to mount the camera to the bracket. The bracket has a slot in the bottom for the USB-C cable.
The Xiaomi Mi mini vacuum cleaner is a nice little and affordable tool. However, it comes with only one nozzle. To reach small areas and especially to clean my printer enclosure from plastic debris, I have designed this small tube nozzle.…
Bottom is flat. Case is tested. Best printed slowly in TPU.
Fairly form fitting to the wheel's contour to minimize stress, it has just enough wiggle room to get on and off without a problem. I'd recommend trying to remove them once you have one side of the tire out, otherwise they are effectively…
I was using one of the other anti vibration pads but they kept falling off, and I keep losing them. This design uses the main screw to keep it all in place but requires a 5mm hex tool to remove the screw, but it takes less then 5 minutes…
I got an old scooter from a friend, but the rear mudguard was broken off and missing. I designed this to be as close to the original as possible while still being easy to print. -----Slicing----- Because this model is too large to fit on…
Update 25 October 2025: I have uploaded a step file of the standard back plate for your adjustments and ideas. Since the adhesive version of the back plates of the Xiaomi Aqara temperature / humidity / pressure or vibration sensors…
A case for the Xiaomi Poco X6 or X6 Pro. I made mine in TPU 95A, settings included.
Xiaomi and Aqara: shame on your for designing the worst battery cover case ever - impossible to open. This model is a screwdriver for this… Opening this sensor is an horror: The little screwdriver will print in 10-15 minutes. I printed at…
This mounting bracket attaches the Xiaomi Mijia Bluetooth thermometer to an IKEA SKÅDIS pegboard . The thermometer is held from each corner and can be removed easily if needed. The model consists of two parts: A frame holding the…
This is a compact ventilated enclosure for the Seeed Studio XIAO ESP32-C6 , designed for a stable Zigbee router / range extender setup. Features USB-C access SMA bulkhead mount for an external 2.4 GHz antenna (via u.FL → SMA pigtail) No…
Desktop stand for Xiaomi LYWSD03MMC temperature and humidity sensor. Original design by the thingiverse user pasiz I modified it for a better fit, the original was kind of tight.
Should print fairly similar to the original design, I found my best results though at 0.16 layer height and printing the parts at an angle of XYZ 90, 45, 45. I think 0.2 layer height would work fine as well. Using the auto-orient feature…
Folding hood to direct the outflow of air from your Xiaomi Air Purifier to be able to use it as a fan. The hood allows directing the air flow from parallel to the ground at about 60º upwards. A small key allows to fix the position of the…
This is a simple enclosure I created for the Seeed Studio XIAO nRF52840 Sense with a hole for a male USB-C connector. Even though it was designed for the XIAO nRF52840 Sense, it should also work with the standard BLE version as their…
This “Fat Man” variant expands on Rames original design by extending the back to provide a place to house the wiring for the IR LEDs as well as some small thru-holes to route those wires through to drive the LEDs, which can be press-fit…
Sturdier tha others and printable without support. NEW VERSION. With ears for better fixation.
simple case for the Redmi Note 7 Print instructions recommended to print with PLA no supports
Seeed Studio XIAO ESP32C3 2.4GHz Rod Antenna for XIAO ESP32C3
Bottom is flat. Case is tested. Best printed slowly in TPU.
I remixed a modell for Xiaomi Mi Temperature and Humidity Monitor 2. And I designed a specific funnel for easier filling. HF!
Fits the version of the phone with following measurements: 164.2 mm x 76.1 mm x 8.1 mm COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models…
Rear fender replacement for Xiaomi M365 scooter. This part is both stronger and lighter (160g) than the original one, though I did manage to break it after a while, so consider using one of the aftermarket fender supports. Print Settings…
Wall mount for Xiaomi 360 camera with hole for USB cable. Can be fitted in any direction you want. 3x 4,2 (or smaller) screws for fastening to wall. 2x M5 bolts and nuts for fastening the base plate that comes with the camera.
Bottom is flat. Case is tested. Best printed slowly in TPU.
Sensor holder for Xiaomi Aqara Temperature sensor. You can get it easy out for battery change.You can stick it to the wall or use some screws. I printed with ABS. If you print with PLA there can be some space between sensor and case…
Just a mix of deferent xiaomi fenders Print instructions Print with supports
Jednoduchý gumový obal na mobilní telefon Xiaomi 14T/Pro s prostorem pro plíšek magnetického držáku. Tisknuto z TPU eSun 95A tryska 0,4 Vrstva 0,12 stromové podpory
Bottom is flat. Case is tested. Best printed slowly in TPU.
I wanted to mount my Xiaomi Mi Light Bar controller under my table, but unfortunately, there was no screw holes in the original base. You need to print: 1pcs Base 3pcs Clips Printed with .4 nozzle at .2 layer height in PETG. However, even…
Model of Claymore mine with socket dedicated for Xiaomi Mi Home Motion sensor. I use it as a sensor for my home alarm so I think, Claymore is a perfect holder for that ;) Simple remix of design created by nathanaelbanden on Thingiverse.…
This is a simple case for the XIAO ESP32-S3 that solves the issue of the reset and boot button access. I found it was difficult to try, and reset is device, so the case solves that issue. Both LED lights are visible through the openings…
Description Battery cover for the Xiaomi Mi Box remote (don't match the Mi Box S remote). I didn't have the original cover and so I took the measurements directly on the remote control. The model is therefore certainly not entirely…
The Dreame comes with more accessories the base station can fit - these screwable holders allows to store all of it.
Track your Xiaomi Mi Scooter with your AirTag and hang a small bag on it!
This is a charging stand for the Xiaomi Mi Band 7 and probably some other Mi Band versions. You just need to add the Mi Band charging cable to this model for the perfect charging stand. This remix is basically a mirrored version of…
This protects the cable connector in the rear of the scooter from being damaged over time. I just glue it in.
Necesita soportes, es un poco más corto que el original EDIT: v2: se ha ajustado la distancia del enganche para el gancho de pliegue, debería quedar similar al original. - hook position fixed LICENSE: NON COMMERCIAL prohibida la venta de…
My another version of AAA battery case for Xiaomi Bluetooth/Zigbee thermometer. This variant arranges batteries on the sides so the whole thing has a slimmer shape better suitable for wall mounting. The case is designed to be printed…
Simple housing with sliding lid with a secure “click” closure. Many thanks to TuTu for the fantastic template! Switch and charger board from amazon - see photo… The tabs for the screws must be removed from the switch. Simply bend them…
The original model suggests printing it in TPU. However, if you want to print it in PLA or PTEG, you should visit the original model where you can find a slightly different version that works better with those materials. For the V3…
i wanted a holder for my Xiaomi Mi vacuum cleaner Mini where i can not only store the device an the nozzles but also charge it. I found some good designs here but not the one that combine all these features in one single holder. So i came…
I wasn’t happy with the battery life of the Xiaomi LYWSD03MC temperature sensor with Zigbee firmware, so I decided to make a AA battery “backpack” that replaces the standard CR2032 coin cell. Remove the back cover of the temperature…
This tiny housing for the seed studio xiao esp32 s3 sense is TINY! I didn't find a mounting option I liked, so I made my own. Features: Magnetic base: Use a 14mm round magnet to attach the foot anywhere on your printer SD card is easily…
Simple Xiaomi mi 11T Case. To be printed in TPU or similar. In the pictures, one printed in Red Tenaflex of Winkle filaments, and with no top nor botton layers to show the triangle infill. The grey version, printed in TPU, with hexagon…
Originally published here: Xiaomi Redmi Note 7 & 7 Pro m1901f7 case by tato_713 - Thingiverse This case was teste on the phone Xiaomi Redmi Note 7, it may be compatible (because its size) with the Xiaomi Redmi Note 7 Pro (model M1901F7S).…
Xiaomi Smart Band 8 Active charging stand. There is a cable channel to tuck the cable into, with everything press-fits into the stand. You might need to use a vise or a pair of pliers to set the charger into the hole. I found printing on…
Xiaomi Redmi Note 12 Pro 5G Case v1.0 Warning: the case does not fit tje Xiaomi Redmi 12 pro plus 5g!
This is a remix of: https://www.printables.com/model/292343-silica-dry-box-for-bambulab-ams https://www.printables.com/model/64276-mk3-s-support-for-xiaomi-mijia I uploaded here also the sliced file to see where you need supports. Or you…
