Liczymy pasujące modele…
Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…
Wydruk około 9,65 €–11,80 € nettoWstępna wycena jednego wariantu
This is a strange use case: use a traditional vacuum cleaner to clean a robotic one. The official robot cleaning guide says you have to clean the dusty filter with tapwater. If you do so you close the pores of the filter by creating a…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Folding hood to direct the outflow of air from your Xiaomi Air Purifier to be able to use it as a fan. The hood allows directing the air flow from parallel to the ground at about 60º upwards. A small key allows to fix the position of the…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
simple case for the Redmi Note 7 Print instructions recommended to print with PLA no supports
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
You can download with or without the inscription.
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Features: Designed for Cherry MX compatible switches. LED Window to leverage the built-in RP2040 neopixel RGB LED. No screws! Mechanical peg holders for the RP2040. Snap cover. USB port access hole on the back of the macropad. Cute and…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
————Required Hardware———— Item Cost Seeed Studio XIAO ESP32 S3 Sense ~$24 IKEA Lillhult USB-A to USB-C Cable ~$5 Old Apple (iPhone) 5W USB power adapter ~$0 5 × M3-0.5x8mm Socket Cap Screws ~$4 I pick the Seeed Studio XIAO ESP32 S3 Sense…
Wydruk około 1,91 €–2,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I found a couple of other mounts for this sensor but I wanted an even more slim and reduce build time and plastic used / cost so I designed my own. This is my first model created for 3D-printing. I made 5 iterations to get to this stage.…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
Mounts on my old 70mai Smart Dash Cam has broken off. I have designed simple mount that fix this issue. It will also allows you to slide camera out. It should probably fit 70mai cameras (like M300, M310, 1S, 3,...) that are using this…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Its important to use the stiffest material you have and maybe some foam to increase friction so it wont slide down the bar If you want to save filament, time and don't care about a rough surface on the lower part, switch to snug supports…
Wydruk około 2,78 €–3,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You cannot mount a light bar and a webcam on top of a screen, as the mountings and cables can get in each other's way. So you have to stack the two devices somehow. In this case, a Xiaomi Mi Computer Monitor Light Bar and a Logitech Brio…
Wydruk około 3,41 €–4,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Xiaomi 360 Cam stand. Orijinal length is much tallerbut i scaled the z to 50mm
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
Xiaomi Mi 360° Camera holder Rozšíření úhlu při zavěšení vzůru nohama
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
Cool and ergonomic stand for a popular smart watch Xiaomi HAYLOU Solar (LS05). The stand can be printed with or without supports. For this, several options for STL files are provided. ls05-A.stl and ls05-B.stl - are not require support.…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
A simple adapter for a flush fit between Xiaomi HEPA Filters for Mi Air Purifiers and Arctics excellent BioniX P140 Fan
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a gridfinity-compatible cradle for the Xiaomi Aircompressor (only version 1 unfortunately), so you can store your compressor along with all your other gridfinitized bike tools. Dimensions: 5x2x2
Wydruk około 4,74 €–5,80 € nettoWstępna wycena jednego wariantu
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Držák na stěnu pro automatický dávkovač mýdla od Xiaomi.…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
A simple remix of the GREAT Xiaomi Mijia Thermometer Wallholder by knackwurst that can fit between two wood pieces of the Nordic Acoustics woof & wool wall panels. Printing You gonna need supports . I recommend to print with the mount…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
Have a broken band for Xiaomi Smart Band and no replacement at home? The 3D printed band buckle is too thick, angular and hurting your arm? Here is a comfortable and fast solution! I tried to search a 3D printable parts for the problem,…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Model náhradního pantu pro box prachu.
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
Outdor camera holder Xiaomi CW300 for a pole or tree with a diameter of 12 cm, for an outdoor socket box fastening using 16 mm stainless steel straps and clips
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I build a CD Mount for my VW Golf 5 with fusion360. It works very well, it has enough space to take a the mobil with a ruber cover in it. I print it in PETG because of the heat and the sun. Have fun
Wydruk około 2,44 €–2,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Using three 15x6 magnets (you can use diferent magnest which fit into the hole of dimensions 45x15x2)
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a parametric rugged box adapted to house five Seeed Studio XIAO ESP32-C5 boards. The setup consists of: 1 XIAO ESP32-C5 used as the controller 4 XIAO ESP32-C5 boards used as nodes A power bank used to power the complete setup The…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An oval shaped case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit paired with a 21700 cell and IP2312 fast charger. I designed the case to be as thin/skinny as possible to maximize the "hold-ability" of the product. Also, only one…
Wydruk około 3,76 €–4,60 € nettoWstępna wycena jednego wariantu
A comfy brick shaped case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit paired with a 21700 cell and TP4056 fast(ish) charger. I designed the case to be as thin/skinny as possible to maximize the "hold-ability" of the product. Also,…
Wydruk około 4,52 €–5,53 € nettoWstępna wycena jednego wariantu
I recomend glue on Bed for Flex and PETG. It helps alot!
WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the PETG versions of the case) which has…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO ESP32C3, an Arduino & CircuitPython capable RISC-V board with Wi-Fi, Bluetooth and USB-C that comes with an antenna and costs $4.99. The product page for this device can be…
Updates 13/07/2024 - Added bottom with holes 05/10/2023 - Added filet to the case ---------------------------------------------------------------------------------------------------------------- Case for Seeed XIAO ESP32-S3. Used STEP…
inporved design for a phone case for xiaomi redmi note 11.
This is a simple case for the Seeed Studio XIAO-ESP32-S3. It has an option with an extra plank that you can stick the external antenna onto. The lid snaps on without any screws or glue. This is an initial model for basically the device…
Переходник - крепление для камеры Xiaomi Mi Home Security Camera 360 Adapter - mount for Xiaomi Mi Home Security Camera 360 Category: Camera
Seeed Studio XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and…
Seeed Xiao BLE snap fit case with reset button, designed to be used as a dongle/central device for ZMK Firmware. Updates 06/01/26 - removed unnecessary features, small tweaks; added step files 10/12/24 - added ejecto 🚀 hole for easier…
my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.2 - 0.28 Walls: 3 Infill: 10% Material: Brand: Kingroon Material: PLA Color: green printed on Artillery Sidewinder X1
A simple tabletop stand for your Xiaomi Mijia thermometer 🙂 Printed in Hatchbox PETG (No supports required)
Xiaomi Redmi Note 12 case with differents models
This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…
Snap-fit case for Seeed Studio XIAO ESP32S3 UPDATE: Added STEP file for the model for future improvements and modifications by the community. Please respect the CC Attribution Non-Commercial license. Features: Snap-fit case, no additional…
Угловое крепление к стене для камеры Xiaomi Mi Home Security Camera 360 Category: Camera
Tube Case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html Print Settings: PETG 0.2mm layer 4 walls 15% infill add support on everything…
Originally published here: Xiaomi Redmi Note 8 Pro m1906g7 case by tato_713 - Thingiverse This case is for the phone Xiaomi Redmi Note 8 Pro , which model number starts with "m1906g7", it will not work with Redmi Note 8 T or the regular…
Seeed Studio XIAO ESP32S3 Sense leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB…
I needed a support for the new Mibox S (which is a bit slimmer than the previous version), so I modified NirDobovizki's design ( https://www.thingiverse.com/thing:2754331 ). Print instructions Category: Organization Summary I needed a…
The Xiaomi 13T already comes with a clear bumper case out of the box, but I wanted to give it a more personal touch. So, I designed this custom case. The case can be printed from TPU with a Shore hardness of 95A or more. The frame around…
The box is made of 3 parts and the cover and carrier are universal for whatever base will be used. The base is specific designed to house an LD2410C sensor.
This is a lid of a Xiaomi Mi TV Stick's remote. On mine the little nozzle on the front broke off so i had to make this for me. Print it standing up on the flat tilted back part to get the best results. (Lay this flat part on the printbed)…
Because I couldn't find any stl file for a phonecase for this phone I disigned my own. It is not perfect but it works.
COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models except remixes i made from others work. https://www.patreon.com/Dengamleninja
Seeed Studio XIAO ESP32-C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivities. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.…
Remixed with the intention to use the Xiao Sense camera as a facial tracker with Project Babble.
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO nRF52840, which is an Arduino & CircuitPython capable Nordic nRF52840 board with Bluetooth 5, BLE and NFC that comes with an onboard antenna and costs around $9.90. The product…
Holder for Xiaomi Wiha screwdriver set to attach to Ikea Skadis pegboard
(Description from original author) WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the…
I put my security camera on a tall closet, but I couldn't see the whole room, so I made a 20° support to compensate the missing angle. All you need is the two printed components and 2 wood 3x16mm screws. Note: the lock has 4 holes in…
This device is based on XIAO ESP32S3 and Wio-SX1262 LoRa module, making it the smallest Meshtastic Device, LoRa Sensor Node or a One Channel LoRaWAN Gateway. Coupled with an exquisite 3D - printed casing, it is equipped with an 868 -…
Case for Small RP2040 Boards This is a case for the small RP2040 boards such as the Adafruit QT PY RP2040 or the Seeed XIAO RP2040. These small boards based on the Raspberry Pi RP2040 microcontroller. They have a USB interface and are…
Originally published here: Xiaomi Redmi Note 10 & 10S m2101k7 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention…
It's a wallholder, it adheres to the wall using doublesided tape. Edit 2024: added a hole for a thumbtack.
Rebuild from @Thomas_63847 model
In tested scenario scooter stands on front tire. Short-term testing proved it's able to hold scooter lifted. Printed in PETG with 60% infill, 0.2mm layer height. Compatible with: Mi Scooter 1S Mi Scooter 2 Pro Mi Scooter 3 M365 Pro (use…
If you're looking for a place for your remote to wait for you - you found it :) This little stand is designed for the Mi Box S's remote. The shape follows the remote's design and matches the box's appearance as well. The remote stands at…
This 3D-printed case is designed to complement the Xiaomi 13T Pro with a snug fit and minimal aesthetic. Every detail is optimized for easy access to buttons, ports, and the camera while offering reliable protection. Features: Precision…
Originally published here: Xiaomi Redmi Note 9 Pro / S case by tato_713 - Thingiverse This case is for the Xiaomi Redmi Note 9S and 9 Pro, but not for the Redmi Note 9 (it's a bit wider). Some of the models are designed for rigid…
WHY? The existing AMS dryer pods by STprinting are great for the outsides. For the middle slot, I needed something to fit my Xiaomi Mija Hygrometer , of which I had a couple lying around. UPDATE v2 Based on your feedback, I strengthened…
Replacement Bracket for Xiaomi 360 Camera Supports are needed, as you can see in the photo. Remix of: https://www.thingiverse.com/thing:4485916
A camera case for the Xiao ESP32S3 Sense to use it as a printer camera. The housing is designed so that as much air as possible can flow through and the ESP32 does not heat up too much. Additional Materials 4x Screw M3X8 There are…
A compact tube-style enclosure designed for the Seeed Studio XIAO nRF52840 & Wio‑SX1262 Kit . This case is suitable for portable Meshtastic or MeshCore LoRa nodes , powered by a single 18650 Li-ion battery. The cylindrical design protects…
If you want to put it on a slightly curved surface (for example, the back of a monitor/tv), use the thicker foam tape, and just attach a strip on each edge of the back.
The bracket features 2x 4mm mounting holes for screws to mount the bracket to a wall. There’s a hole underneath the camera for a standard ¼” screw to mount the camera to the bracket. The bracket has a slot in the bottom for the USB-C cable.
The Xiaomi Mi mini vacuum cleaner is a nice little and affordable tool. However, it comes with only one nozzle. To reach small areas and especially to clean my printer enclosure from plastic debris, I have designed this small tube nozzle.…
Bottom is flat. Case is tested. Best printed slowly in TPU.
Fairly form fitting to the wheel's contour to minimize stress, it has just enough wiggle room to get on and off without a problem. I'd recommend trying to remove them once you have one side of the tire out, otherwise they are effectively…
I was using one of the other anti vibration pads but they kept falling off, and I keep losing them. This design uses the main screw to keep it all in place but requires a 5mm hex tool to remove the screw, but it takes less then 5 minutes…
I got an old scooter from a friend, but the rear mudguard was broken off and missing. I designed this to be as close to the original as possible while still being easy to print. -----Slicing----- Because this model is too large to fit on…
Update 25 October 2025: I have uploaded a step file of the standard back plate for your adjustments and ideas. Since the adhesive version of the back plates of the Xiaomi Aqara temperature / humidity / pressure or vibration sensors…
A case for the Xiaomi Poco X6 or X6 Pro. I made mine in TPU 95A, settings included.
Xiaomi and Aqara: shame on your for designing the worst battery cover case ever - impossible to open. This model is a screwdriver for this… Opening this sensor is an horror: The little screwdriver will print in 10-15 minutes. I printed at…
This mounting bracket attaches the Xiaomi Mijia Bluetooth thermometer to an IKEA SKÅDIS pegboard . The thermometer is held from each corner and can be removed easily if needed. The model consists of two parts: A frame holding the…
This is a compact ventilated enclosure for the Seeed Studio XIAO ESP32-C6 , designed for a stable Zigbee router / range extender setup. Features USB-C access SMA bulkhead mount for an external 2.4 GHz antenna (via u.FL → SMA pigtail) No…
Desktop stand for Xiaomi LYWSD03MMC temperature and humidity sensor. Original design by the thingiverse user pasiz I modified it for a better fit, the original was kind of tight.
it seems that I am the first to have designed the cover for this phone (all the ones I found despite having the correct name were for other phones). what you see in the picture is a customized version not available here, if you want just…
Should print fairly similar to the original design, I found my best results though at 0.16 layer height and printing the parts at an angle of XYZ 90, 45, 45. I think 0.2 layer height would work fine as well. Using the auto-orient feature…
This is a simple enclosure I created for the Seeed Studio XIAO nRF52840 Sense with a hole for a male USB-C connector. Even though it was designed for the XIAO nRF52840 Sense, it should also work with the standard BLE version as their…
This “Fat Man” variant expands on Rames original design by extending the back to provide a place to house the wiring for the IR LEDs as well as some small thru-holes to route those wires through to drive the LEDs, which can be press-fit…
Sturdier tha others and printable without support. NEW VERSION. With ears for better fixation.
Fits the version of the phone with following measurements: 164.2 mm x 76.1 mm x 8.1 mm COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models…
Seeed Studio XIAO ESP32C3 2.4GHz Rod Antenna for XIAO ESP32C3
Bottom is flat. Case is tested. Best printed slowly in TPU.
I remixed a modell for Xiaomi Mi Temperature and Humidity Monitor 2. And I designed a specific funnel for easier filling. HF!
Rear fender replacement for Xiaomi M365 scooter. This part is both stronger and lighter (160g) than the original one, though I did manage to break it after a while, so consider using one of the aftermarket fender supports. Print Settings…
Wall mount for Xiaomi 360 camera with hole for USB cable. Can be fitted in any direction you want. 3x 4,2 (or smaller) screws for fastening to wall. 2x M5 bolts and nuts for fastening the base plate that comes with the camera.
Sensor holder for Xiaomi Aqara Temperature sensor. You can get it easy out for battery change.You can stick it to the wall or use some screws. I printed with ABS. If you print with PLA there can be some space between sensor and case…
Bottom is flat. Case is tested. Best printed slowly in TPU.
Just a mix of deferent xiaomi fenders Print instructions Print with supports
Jednoduchý gumový obal na mobilní telefon Xiaomi 14T/Pro s prostorem pro plíšek magnetického držáku. Tisknuto z TPU eSun 95A tryska 0,4 Vrstva 0,12 stromové podpory
Bottom is flat. Case is tested. Best printed slowly in TPU.
I wanted to mount my Xiaomi Mi Light Bar controller under my table, but unfortunately, there was no screw holes in the original base. You need to print: 1pcs Base 3pcs Clips Printed with .4 nozzle at .2 layer height in PETG. However, even…
