401 models
Amazing hexagon twist fidget with a handle! It makes a really awesome ASMR like sound when moving it up and down using the handle! This fidget gives you something to mess with while working or doing anything for that matter. Very fun and…
Replica of the main character's helmet from the video game Satisfactory. Comes in two size variations. The “large” version is for a 23" circumference head and the “small” version is for a 22" circumference head. Both sizes are designed to…
This snappy fidget button is extremely satisfying and a pleasure to hold in your hand, and easy to print and assemble, the required force can be set in 9 steps, does not require any additional parts, just a few drops of lube to start…
I have .3mf files with my settings I've used over at Makerworld . To split the model into each individual object: (In slicer) Right-click model → split → to object Designed for a full size ATX PSU and a dual PCIe bracket GPU GPU size…
Easy to print, customizable text via .STEP, Snap-fit assembly! Create your own Agenda for any occasion. No support required. To ensure smooth operation and that the sliders stay in place, add some Super Lube or grease under each slider.…
Inspired by the great designs already out there, I made this adaption with added 140mm fan and optional keystone module (to house a HDMI keystone passthrough). I found that the heat generation on the 13th gen i9 is too much and this case…
This is the trippy but super satisfying hexagon fidget toy! it prints in place with no support and will blow your mind! We printed it ourselves on Youtube:
Fun satisfying fidget spiral toy!
What makes it special This wheel started as a prototype, and four out of the five prints I did worked. I plan to make another model like this one, but this version already prints easily and has no complex settings, which is part of why I…
A cute little model of our favorite game mascot - the lizard doggo😍 The stl file is so large bcs it's a very detailed model and i was too lazy to do anything about it xD Oh and be careful when removing supports I broke both of the doggo's…
Helicone variation I created. Super satisfying spinning toy. Pretty easy to print, has no support, infill doesn't matter, 24 spinners
Satisfying star fidget toy to play with. It can reduce stress or you can play with it just for fun.
I have added an update to this. Please test out the new additions and let me know your results in the comments! Watch the video here where I explain the whole process. Most of the parts can be printed with PLA at 15% in-fil. All the screw…
If you are looking for a way to relieve stress, improve your focus, or just have some fun, Roller Rapture is the perfect fidget toy for you. This model is inspired by popular fidget roller devices that promote stress relief and…
Scaled models of buildings from the game Satisfactory. With optional holes for 6x3mm magnets ( here are the magnets I used). You can use them with a whiteboard for a more tedious but tactile factory planning experience! Fun to look at,…
Rack Mount for Minisforum MS-01. There are version 1 and version 2. Print using PETG, PETG (CF), ABS or ABS (CF) is highly recommended. Version 1 will be a bit tight at the ear (top & bottom) side and take up 1 and ⅓ U of rack height.…
This model prints in 24 different pieces with 19 different files. I'm continuing to tweak the model for increased quality and reduced support so expect updates soon. A lot of the pieces snap together or screw in, but some pieces do…
This is my original design for Miniature Over-Ear Headphones , specifically scaled to be the perfect accessory for collectible figures like Labubu, Pop Mart, and other 1/12-scale art toys . The unique print-in-place construction means no…
Minisforum MS-A2 and MS-01 one piece case, designed for extra cooling. Original case used for modeling with Fusion360, with some measurement tweaked for better fit and to allow some tolerances when 3D printed. STEP file of the raw case…
Minisforum MS-01 MS-A2 MS-R1 Dual Rack Mount 2U This should also work for the MS-A1, thought the dimensions are slightly small in width and depth, but the height is the same, so it should hold them snug, you'll just have a few mm gap to…
I'm not sure that this fits the MS-A1. It looks like the same chassis but I'm not certain. Tolerances are tight for a snug fit PRINT SETTINGS I'VE USED: Nozzle: 0.4mm Layer Height: 0.2mm (Feel free to experiment and change what you like )…
Very nice satisfying hexagon fitget. Easy to print. Printed from PLA. For assemble you need 4 magnets.
Update 2023/12/01: Added a step file with the two portions of the coupon separated out as well as a DXF of the sketch to aid with customization. You've spent more hours than you care to think about routing endless items into the Awesome…
DISCLAIMER: The original models were made for the game Satisfactory (I highly recomand btw), from coffee stain studios. I do not make any money in anyway of of these models, and it takes me many hours to “convert” each models. So I'm…
This is the train cart from the game satisfactory, we do sell the train models and others on our Esty store but the carts and tracks are free here, any question feel free to ask or suggestions. Etsy Link to Train:…
Every single part extracted from the game files. Processed and slightly modified to be more slicer friendly.
** Updated September 7th 2026 Added single layer small bridge layer to the keycaps to remove the need for supports Added low profile keycap variant Should work with any MX keyboard switches. I have tried with a few different MX blue…
A from-the-ground-up model of the Build Gun from the game Satisfactory by Coffee Stain Studios. Has absolutely zero assets from the game files, and in fact is quite different. However, my version is printable, as well as possible to…
Anti stress or satisfying button , 100% printed, even spring !
Yeti Lid Holder https://i.giphy.com/media/zvpds7EGBb5rDojsNq/giphy.mp4 I created this model to hold Yeti lids. It has a 10mm square hole in the base that can hold a 10mm square magnet, if desired. For the yet lids that have the magnetic…
E: my design has been completely superseded by Bill and Britt from GizmoThrill (punished props academy)'s version here: https://www.printables.com/model/707053-satisfactory-helmet-cosplay-replica-2-sizes I wholly endorse theirs as an…
This is a replacement bottom plate for the Minisforum MS-01, designed to accommodate a 140mm fan for improved cooling. The plate features precise cutouts and mounting points, ensuring easy installation and optimal airflow. To complete the…
This Fidget Circle is a perfect blend of fun and relaxation, designed to help relieve stress and improve focus. Its unique circular design allows for smooth spinning, offering a satisfying tactile experience. Whether you're looking to…
a super satisfying perfect fidget twister to twist together, i hope you enjoy playing with it let me know how your experience was in the comments it would really help me a lot if you just would like it or download it have a nice day 👍
DISCLAIMER: The original model was made for the game Satisfactory (I highly recommend btw), from coffee stain studios. I do not make any money in anyway of of these models, and it takes me many hours to “convert” each models. So I'm…
Love the game and have always wanted my own “Cool S” I ripped the model directly from the game, and removed .1mm from one side to make it flat and printable at the current orientation. Add supports on the single overhang and everything…
My new PC is a Minisforum UM690S. Despite its small size, it is very powerful. However, the small computer has one drawback: the two case fans are quite loud and run at full speed constantly. Therefore, I opted for a small modification to…
Some users on Reddit requested a FICSIT logo keychain, so i made one in Fusion 360 by tracing over a picture. The layers are made to match a 0.2mm layer height, or a number you can divide it by (0.1mm, 0.05mm) Print instructions Category:…
Was created as a Christmas gift for Reddit Moderator Temporal_Illusion (aka my Dad) Two base options included, only need to print one. Option one, no support but will need to glue the feet on Option two, with supports (I used tree Auto,…
Long story short - I got tired of waiting for a single-slot cooler option for the Intel Arc Pro B50 card to use with my MINISFORUM MS-A2 hosts, so I designed a replacement shell that fits the card in a dual-slot configuration, and added a…
There are a lot of Yeti handle models out there. I like the two-ring ones that support the tumbler at the top and below the beltline. This one prints easily with minimal supports. It screws together with a printed-in-place screw and it…
Feel free to print and sell but please link back to here where you found it for others to enjoy and print. :)
19 inch rack bracket for minisforum ms-01 power supply this mounts to the side bottom of my rack enclosure No support material needed. Included is the f3d file
About This handheld chain conveyor belt fidget uses a satisfying snap together design, with no external hardware needed! It also requires no support, and can be fully printed on single material machines like my own. Print Settings 0.4mm…
2U 19 inch rack front panel mount for minisforum ms-01 These panel mounts require the DAP 2U MP-1 bracket. Print the front panel mount on the front. No support material needed. Included is the f3d file
Print in vase mode with .5mm wall both models 100% size both models
Ergonomic grip based on the right side of the Satisfye Nintendo Switch grip rebuilt for the switch lite the problem raised by https://www.thingiverse.com/thing:4857051 has been fixed and I updated the edge curve, when I originally made it…
I modified the nut on top to have more details. Have fun printing Print Settings Printer Brand: Anet Printer: A6 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 10% Filament: . PLA Gold, Woodfill Category: Games
The Minisforum MS-A1 is an awesome low power motherboard case combo, but the cooler is weak and kind of noisy. The cooler mount is almost but not quite AM-5 cooler compatible. I made a mount to adapt the NH-L9a to the slightly smaller…
Revised Left side model 20260215 - Inner screw holes did not line up as intended. There is also a remix that fixes this problem in a slightly different way. See Link Below:…
This is a remix of Gear Seekers amazing design to rack mount one or two Minisforum MS-01 or MS-A2 computer. My main goal was to increase strength and rigidity of the design and also minimize the need for support material. Print vertically…
Bottom plate to replace the original one with a mount for a 140mm fan, together with a hole to pass the cable inside the unit. Original plate used as base for the design. 2 small supports are needed at the connection to the front plate of…
Satisfactory the video game turned into one of my favorite games over the past several years and I decided I wanted to make a replica of something from the game. I figured the Build Tool would be neat to model and print. I think I started…
I wanted to mount a 140mm fan to my BD770i for additional air flow. However, the included bracket only allows for mounting of a 120mm fan. This mount allows a 140mm fan to be mounted offset to the I/O shield and bolts into the existing…
The Lexus IS-F Airbox Clip is prone to breaking. This model reinforces the tab with a 3D printed brace, and optionally you can replace your clip if you've lost it. The Brace installs over your existing clip with no modifications required…
A simple rack to house one or more Minisforum MS-01 mini pcs. The rack is designed so that you can print as many layers as you need and connect them together. All ports and the serial numbers are accessible whilst in the rack. Add a top…
This is a custom-made mount for installing two Minisforum MS-01 mini workstations into a 2U 19-inch rack . The design ensures a stable hold and optimal ventilation and includes a lock mechanism to prevent sliding out. To assemble this…
Just a simple vertical stand for those with a Minisforum MS-01. Supports both orientations (cooling is not affected). Printing: This was printed in PLA (I used Polylite PLA PRO) with 5 walls and 25% Gyroid infill. Assembly: Pretty…
A quick Mod for the Minisforum MS-01 1U Rack Mount Kit Designed by Gear Seekers. Faceplate for 10" racks. Recommend PETG-CF for heat tolerance and rigidity.
One slips through the other like magic!
Don't print the top on top of the bottom... Print with supports. Maybe tree?
an ergonomic grip for the New 3DS XL/LL inspired by the right side of the Satisfye nintendo switch grip Category: Video Games
A conveyor belt styled shelf to help keep your factory tidy. Print and Build Instructions This shelf is designed to be built using the included printed fasteners without any extra hardware or glue, but can be glued for more strength. Hot…
To assembly, 1. pass the first wireless antena trough its holders on the back panel 2. slide the back panel into the bottom 3. install the board into the 4 holders (to avoid damage try to arch the panel instead of pushing the pilars) 4.…
Note: The “prx01” label on the front is not included in the design. Feel free to add your own hostname directly in the slicer. Print it face down with tree supports on build plate only. The design requires three M3x8 screws and nuts for…
A small, print-in-place toy in which you put up to 3 marbles that cycle through the machine when you move the outer ring up and down. Shifting ramps move the balls seamlessly and makes for a great fidget toy…
Satisfying Little Whistle My first attempt at a whistle, came out ok!
A sphericon is a funky-looking, smooth, and wobbly shape that’s kind of like a mix between a ball and a weird rolling polygon. If you cut a polygon in half, flip one of the halves, and glue them back together, you get the base shape of a…
Backstory: I ordered a datacenter Intel U.2 SSD before receiving my MS-01, only to realize once it got here that it didn't fit, with the ms-01 only supporting 7.5mm drives. I'm by no means a professional CAD designer and would like to see…
This is a different approach to rack mounting Minisforum MS series. Instead of holding the original casing, it replaces it, allowing 1U mount* for the machine Also features 2x keystone jacks and ears for a cable clip and a flush button…
I recreated a model sent to me by ThomAce Van Doom on the Minisforum Discord. Included is a Fusion 360 file which is fairly unoptimized, but it should be enough for someone to modify it to their use case. Included is also an example .3mf…
I like having plenty of options when I’m playing on my Switch 2, but I also don’t want to stop buying physical games. So, I decided to design this attachment to always have more of my favorite games with me. This attachment holds up to…
Print two of these vertical stands for your Minisforum MS-A1. Stays in place with the existing rubber feet on the computer case.
Because I could not find a free model for an additional cup holder, and charge 20$ for 3D printed ones seemed weird, I decided to create my own. A standard European McDonald's cup fits just fine. Version 1.1 has hole for small light, and…
Hardware: M3*20 Hex socket machine screw: 4 M3 nut: 4 4mm diameter, 2mm height magnet: 4 Assembly: Prepare all parts. PLA is fine for all parts, but i suggest PETG for the "slider latch" which has flexing pins. Print with 4+ walls and 30%…
This fidget clicker (ratchet) gear design is perfect for anyone looking to create a satisfying tactile experience! Featuring chamfered edges on each tooth, this gear is designed for smooth, consistent clicks as it rotates, making it ideal…
Just a simple Lexus F Logo. Similar to the F logo found on the Lexus ISF
dejo por aqui mis diseños para el manta 5 se el del acople de camara morado el 5 se DC espero que os gusten y os sirvan
Optimized for FDM 3D printing with no supports needed! After many, many iterations (like 5-6 for each clip type), I managed to create minimalistic clips that can hold all of the blade guards in this Multigroom 7000 kit, and likely other…
Hello. Here a short description, how I put all the parts together. In the model is space for a small atomizer-chip, wich produces smoke out of the chimney. It's called: 517C 5V Atomizer Board Driver USB. There is no soldering needed. I…
I made this for cables but as a side effect it has a really nice snap to it when closing. Can be used for cables or paracord maybe. I use mine behind cabinets and TVs for things like Chromecasts and Alexa cables I think 100% infil would…
A bracket to attach the MS-01 power brick to a wall or the bottom of a table. Print two, they slide snugly onto the ends of the power brick.
Diese Wagen sind ein Community-Projekt. Mitglieder verschiedener Foren trugen erheblich zur Entwicklung bei. Herzlichen Dank an der Stelle an alle, die öffentlich sichtbar oder auf Umwegen Stücke zum Puzzle beigetragen haben. Das fertige…
Designed to fit the Lab Rax or any 10" serverrack: https://makerworld.com/en/models/1294480-lab-rax-10-server-rack-5u?from=search#profileId-1325352 No supports needed
9 Volt Battery Protector This protector is designed to keep the positive and negative terminals from shorting out when not in use. I have to keep a 9v battery handy, but they do short out and drain in my pocket if I accidently let the…
The Minisforum ITX boards support an unusual hole placing for the cooler mounts, 52mm on the edges. The model by NAnglo uses a slighty wider spacing, therefore I needed to adapt it a little bit. Print with temperature resistant and robust…
Mounts a noctua 120mm fan to OEM minisforum 790S7 cpu cooler. Uses OEM screws to mount internal 4 holes to cpu cooler and M4 screws to mount fan OEM panel will also fit if foam seal is removed.
Basic stand for a Minisforum MS-01 to allow 6mm of clearance underneath for better airflow to the NVMe drives. In my personal testing with all three drives loaded, I got a 4-5c reduction in temperature.
may have to scale it to get it to fit right, should not need glue but you can use some. press into the hole in the front of the pusher and your misfeeding problems should go away.
Rack-Mount for the MS-01. It slides in and locks in-place similar to the original enclosure. In addition, three 60mm in the front (for me it's 60x15mm Noctua ones) provide additional airflow to improve cooling, especially for PCIe-Card(s)…
Originaly just test of some pinions, rack and spur gears. But i have found that it is quite satisfying so you can play with it as well:) There is two versions of rack, one with some stopper on both ends, second one is without stoppers, so…
ExpressLRS Vertical Antenna Standoff Mount for Betafpv or AxisFlying antenna 4/5/23: Added a slightly shorter version Category: R/C Vehicles
colored model for multicolor printing I used kexelled pla orange, silver and black.
I wanted to optimize airflow for the BD790i inside my Fractal Ridge case. Played around with different fans and found out that the big NF-A15 and - even better - the newer NF-A14x25r do fit nicely in that setup. The new one even without…
My son asked for a generic button for his desk he could use as a clicker and fidget toy. I found an old spring lying around and put together this design. It's a guided button in the housing held together by magnet. For remixes I'd…
SMALL, MEDIUM AND LARGE! Print the best for you! A 3D-printable hexagonal twist fidget featuring multiple concentric hexagon layers arranged in a stepped spiral geometry. The design creates a dynamic visual effect when rotated and…
I made the base a bit taller to make room for magnets (you'll need two 8x3mm) and sized it to 100mm wide as a part of my 'wall of shame' tribute series to games I've spent too much time in. Did a color swap between the base and the…
