Counting matching models…
A simple design that everyone could enjoy. Inspired by a simple wave structure. Used Filament: This model was printed using PLA MINERAL Concrete from Fiberlogy. The Fiberlogy team was so nice to send us some samples of their filaments and…
Here is Kiriko Kunai from overwatch 2. I have split the knife into 2 parts and added 2 2mm holes for alignment. For stuff like this I like to use 2 pieces of filament. Im not sure the true scale of her kunai, but they normally range from…
This is Kirito's Night Sky Sword from anime "Sword Art Online : Alicization" 1 : 1 scale. I made it in parts to be glued/welded together with an M8 threaded rod inside of it for extra rigidity. I printed in PLA with 25% infill which…
The Kukirin G2 is a well-built electric scooter, but for some reason, it only comes with a low-quality rear fender. To protect the shock absorber and myself from water, I made two fenders: one for the front, secured with two screws, and…
No support needed.
UPDATED! these have all been made stiffer! Also please note that for the illustrative purposes the kirigami frame a brace are depicted upside-down. After running the LDO Kirigami Bed Kit and loving it for over a year I found only one…
Compatible with: V0 Kirigami Bed Salad Fork / Tri-Zero / Pandora's Box anything with an extrusion to attach it to Supports the Rainbow Barf Logo LED or a Neopixel Mini Button BOM Item Qty. M3x5x4 Heatset Insert 2 M3 Hex Nut 2 M3x6 BHCS 4…
There is a small torx screw in the adjusting nut that needs to be removed first. In my case the screw was hiding in the back of the nut so I had to use a bit of force to loosen the nut so the screw would show up. I printed it with 4…
Porte clé Kukirin en relief pour les trottinette de la gamme.
Use this on the V3 Kirigami bed to get the same Y offset as on the V2 and remove the back/forward wiggle which happens because there is not enough tension on the springs. It can also be used to fix the maximum offset of the V3 by putting…
Kirigami Bed Front with insertable Voron Logo.
The Headpiece is a straightforward print. I hope u have fun with it!
This is pretty basic and probably has too many holes but it kinda works, so here it is. Tips for printing: I had better luck with flexible PLA than with TPU, mostly due to stringing. I'd really like to print it thinner, but I needed 3…
Inspired by this design , but with single 3010 for the popular kirigami bed. The model isn't pretty but it works well. It would be easier to center the fan but many people use wago connectors and this would not work so I shifted the fan…
Printing recommended (SLA)
Zpevnění pro Kugoo Kirin pro 2021. Pro řídící tyče 60 x 37mm. Tisknuto PETG s výplní min 30% a 10 perimetrů. Logo na vsazení do záslepů tu mám taky.
This is Kiriko's kunai 3d model ripped from the game files, retopo'd and optimized for 3D printing. I have also added the small details that are part of the normal map and not the actual geometry of the ingame model for extra…
This model is compatible with the lego system.
See picture 2 for the adjusted Kirigami bed mount. I had it working with only 3 screws first, but made the last one possible without adding a M3 heat-insert. Just screw a M3x6 BHCS directly into the plastic. Please refer to the original…
It originally started as a personal custom, but due to requests, I decided to share the design. This Kirigami front bumper is characterized by its simple surface configuration. Two designs are available, LED-compatible and…
I was struggling to get the chamber temps up in my Voron V0 and research led me to the use of bed fans to help circulate and distribute heat from the bed. There were not a lot of options for the Voron V0 with Kirigami bed so I decided to…
Kukirin g2 mud guard / rear fender extender Clips in - no glue or zip ties needed. It clips in on the sides (bottom part). Printing recommendations: At least 15% infill, PETG/ASA/ABS but PLA will work too. Supports needed. I printed it…
Zabuza Momochi's Executioner's Blade from NARUTO one of the Seven Ninja Swordsmen of the Mist swords. I couldn't find a STL I liked so I made one, it isn't screen accurate but I tried my best. it is very large Hilt to tip is 66"
Settings for 0.4mm nozzle: First layer height: 0.14mm Layer height: 0.1mm Layer width: 0.36mm Nozzle temp (for PLA): 200C Nozzle temp (for PETG): 235C Bed temp: 65C Recommended using 0.4mm nozzle or smaller. This keychain doesn't have the…
I prefer the look of the original Stealth Bumper than the one provided by LDO motors. It uses a LED diffuser mask to provide better light masking and also makes more contrast to the printed main body. You can print the mask in either the…
0,1mm thinner pins on the jaw for a better fit
his shoulder gear i made for cosplay
As part of the October free Zelda commissions, here is the Kokiri Sword! let me know what you all think and make sure to post your makes and let me know if there is any trouble with the files, it does have a 0 tolerance for the blades so…
So 3D Printy suggested somebody try to recreate an experiment he was reading about and wanted to see it printed on a MK4. I went to work and this was the result. Both STLs for printing and SVG files for cutting available. Print .2mm…
Kukirin g2 front fender / mud guard Clip on - 5 seconds installation. As a bonus, here is my silly design process:
I recently read about a kirigami-inspired soft robotic gripper developed at North Carolina State University, and I wanted to create an FDM 3D-printable version to play with. The full article about how it works was published in Nature:…
The Kirigami frame that was included with my Formbot V0.2 kit was slightly thicker than specified, as also experienced by SrgntBallistic . This made it very difficult to install the Z nut block on the frame. After installation, the frame…
Rear extension fender designed for the KUGOO Kirin G2 New (2024/2025) electric scooter. This 3D-printable part provides extra protection against dirt, dust, and water splashes coming from the rear wheel. The model has a reinforced…
How to add THIS to ORCASLICER This one is mostly for FUN and to Show that SWEET Kirigami build plate setup in your slicer. First download the STL provided Open OrcaSlicer In the Printer section click on the “Printer Settings” button In…
Hi there! When printing with higher acceleration values on the V0.2 the bed will swing up and down. To fix this I designed this brace that will stiffen up the kirigami bed carrier. In addition for a simple mount you should also reprint…
Printable hilt for Kirito's 'Elucidator' sword from the anime Sword Art Online
I removed hole for screw which was triggering z endstop in V0.1. The hole is not necessary anymore and was making part prone to warping and harder to print.
This bracket allows you to mount a 4010 or 4020 axial fan to the underside of the Kirigami Bed to improve the heat-up time of the chamber for the Voron V0 printers. The bracket has 2 integrated Wago 221-412 mounts to allow easier wiring…
Automatic Z calibration on Voron 0.2! This is a mount for a nozzle wiper and touch microswitch that attaches to the Kirigami bed frame on Voron 0.2 printers. It allows to use the Klipper Z calibration plugin with 0.2 printers. The nozzle…
there are two versions, hartk version with bushings (sexbolt_upper_mount, sexbolt_lower_mount, sexbolt_torso) v2.4 version with deflanged pulley (nozzle_probe_R1, R2, use sexbolt) auto z calibration should work with short klicky probe, on…
Objects should import in correct print orientation. Ensure the build plate has cooled before attempting removal - you do no want to put any bend in the blades. Glue the knife halves together and screw into the handle. Ensure they are…
Kirigami rose .. picture generated by AI There are several variants of colour combinations try also new and show us your colour combos :-) ############################################################################# Red variant Print at…
For Kugoo F3 pro max
This model is remix of Kirigami LDO Breakout Mount from LDO Motion. I use it together with original part to connect thermal fuse with wago terminals and also when using ac bed heater to distribute ground wire to build plate and kirigami…
Tired of mud and water splashing everywhere on your Kukirin G2 MAX? Upgrade to this custom-designed fender for ultimate protection and a unique aesthetic. Unlike the default fender, this one is engineered to shield against the elements…
Screw cover for the Kugoo Kirin G2 Pro
min 40% infill supports required TPU material
I am currently testing this version. Print at your own risk! (normal size) Short version: Already tested and working. Not compatible with version 2026 After 80 kilometers my front fender broke (normal size fender - PLA material) . I hit a…
I printed the original design by MarekZCMB and then found that because I have the R1 version of the Z endstop mount, I would need to disassemble about half of the printer to replace it I decided to remix it as a cover only, no disassembly…
If you had to take apart the front/rear shock absorbers, you know that the holes to release the shock absorber are just covered with a sticker and re-sticking is not possible without glue, so I made a simple hole cover. Printed with PETG…
3D model dimensions: washer 20mm, washer height 1mm, seat 16.5mm, plug height 6mm, recommended plastic PETG
A replica of Kiritsugu's Thompson Contender as seen in Fate/Zero Features: Dummy .30-06 round with separate projectile if you want to multi color print Realistic break action, trigger guard acts as release Fore-grip and hand grip slide on…
divided into two parts, the M2 screws are replaced by M2 self-tapping screws supports are needed
I found the previous mounting brace at the back of the display prevented the mounting to the kirigami bed. I have adjust the hole spacing on the mount to align properly with kirigami as it was little off. No more brace either, its now a…
If it seems to you that the chain does not touch the vertical profile in the upper position, you can try replacing the part with a lower one. Compatible with - https://www.printables.com/model/407209-end-link-cable-chain-for-voron-v02
Voici ma version du Kokiriko , inspiré d'un modèle original. Le kokiriko est un instrument de percussion idiophone traditionnel du Japon. Il s'agit de petites lames reliées par une corde, avec deux poignées aux extrémités. En agitant…
I was fed up with the fact that when I tried to put my G4 on a stand on a softer surface, it would fall to the ground. So I modeled this. For assembly you need: 3x - M3x12 screw Allen head 3x - M3 nut Adhesive material, such as silicone,…
UPDATE: I noticed the Dragonburner was hitting the screen just slightly when at Y0. I added a little cutout to prevent that. I haven't printed this one yet as I like K Millers remix and may try that instead. Beware: the KNOMI 2 is 5v…
This model is long but will fit on a Bambu X1/A1 bed. Otherwise, you will have to split the model and glue after printing. There are four extra slots if you want to store your hero clan tokens instead of placing it in your player tray.…
When slicing - I highly recommend that you print the top half of the ponytail at 50% speed so it doesn't sag/plop down. You can do that by adding custom g-code at that layer " M220 S50 " (S50 meaning 50% speed). This setting is put in the…
I printed it on PETG plastic, but you can print it on TPU or flex if you need flexibility. Stick it on with double-sided tape or glue compatible with your plastic.I printed it on PETG plastic, but you can print it on TPU or flex if you…
Inspired by the Research from Polytechnique Montréal presented here: https://www.youtube.com/watch?v=6rrDW6YIbXI
Note: For the one person who downloaded Version 1, which is no longer available, I'm sorry. The one test I didn't do with the original was a longevity test. As it turns out, the original used portions that were too weak and thin, and it…
This mod will get MK2 update soon-ish. It'll require some extra HW and Z motor mount to be reprinted. Extra BOM: Kirigami bed 2x M3x5x4 heat inserts 4x M2x20mm screws 4x M3x8mm screws 2x M3 nuts 2x M2 4mm heat inserts or 2x M2 nuts (both…
I have received another request for a character from the anime series - My Hero Acadamie. This time it is Eijiro Kirishima (Red Riot). As always I am including a copy of my basic "Sugar Cookie Dough" recipe. Print Settings Printer Brand:…
Before you print: Make sure you have enough space between the kirigami bracket and the bottom panel of the camber: Place your 5015 blower on the bottom panel Move the bed all the way down The blower should be able to move freely The…
The hole is 3.3mm, works fine on my printer but may need adjustment for yours. Recommend using fuzzy skin feature on kiritanpo, turns out pretty well. きりたん砲の穴サイズは3.3mm、自分の3Dプリンターに合わせて調整する必要がある。 FDM式のプリンターで作りたいならfuzzy skin機能お勧めします。相性がかなりいい。
Already tested and working 200+ kilometers - Upper part with reflector (PLA material) If this fender lasts 200 kilometers without any damage, then I will update this description to already tested and working. ;-) You can choose from two…
Bed spacer for the V0 Kirigami bed mod. Allows you to line the bed up to the front or rear of the frame.
I fought with my bed binding for a long time before I figured out it was because the T-nut mounting screws had slid into the spring in the backlash nut. Downsides christophmuellerorg's original design is excellent. The extra space on the…
UPDATE 02.01.25: added .STEP file, the 7 round capacity with holes. UPDATE 01.01.25: improved the follower's design These are based on the original geometry, so they should be compatible with the Kirin type A, the Wrenfield and the…
Extra 2 headlights for Kukirin G2 electric scooter
This is a custom-designed mount to securely attach a Kryptonite Evolution Mini-7 U-lock to the frame of a KuKirin G2 Pro e-scooter. The basic idea is from here:…
I remade the shroud from scratch then made the shroud big enough to allow for a BCAR. It can probably fit any BCAR but I've tested with the Worker BCAR without sleeve, ex BCAR, and ex BCAR rev2. Print Instructions: 3-4 walls, 15% infill,…
No rattling noises and easy to fold. Printable in 3 hrs in PLA with: 0.20 layer height. 5 layer wall loop. 20% infill in honeycomb 3D (30% infill for FOLDING BRACKET) EXTRA STUFF NEEDED x4 M4 x 8mm nuts and bolts (to fix collar to stem).…
I don't use a seat with my KuKirin G2 pro, and the 4 mounting holes remain uncovered. I designed simple plugs for them - you should print 2 threaded and 2 without thread. IMPORTANT! Be careful when screwing in the threaded plugs - they…
Logo k vytištění ze 2 barev Kugoo Kirin. Na zpevnění, které jsem tu také vložil, lze jen vsadit, drží i bez lepení. Přívěšek na klíč Kugoo Tisk PLA
I purchased the bottle holder and bottle at Decathlon.…
I loved the film “Kirikou and the Sorceress” when I was a kid and the fetishes always fascinated me so I tried to recreate this one for 3dprinting. The film was made at the time where films were made to be good and not for DEI bullshit,…
Previous version: https://www.printables.com/model/934690-shun-65-premier-nakiri-knife-sheath
Description: This mod if for a rook 2020 printer designed by rolohaun, had a kirigami bed laying around and wanted to intall it in my new rook 2020 build but couldn't find any mods so I desinged one from scratch inspired by the rook…
This part is a bit wider than the original Kugoo shockarm cover and should stay inplace without any glue as opposed to the original one. I printed it from ASA to tackle weather conditions but the filament choice is up to you. The original…
A sheath for a 5.5" Nakiri Knife. Newer Version: https://www.printables.com/model/939253-shun-55-premier-nakiri-knife-sheath
Needed a Drag chain for my ROOK 2020, and remixed this one I have used it in other builds, and I worked flawlessly, Needed to be smaller and have more of a turn radius since it would be used for the y axis to house the heated bed wires,…
Son unos guardabarros ponibles con clips en los guardabarros del kukirin g2 pro (patinete eléctrico) Preferiblemente petg con recubrimiento uv para no daño por exposición al sol. Miden 0.5mm de espesor ideal para poder doblarlos a mano…
ABS+ 5 perimeters M6 bolts and nuts M3 bolts and nuts locktight
Simple 80 mm coaster with a Kirin symbol on it, from WoW
Extrusion length same as the rest of your Z extrusions. x2 - Mgn9c, Length 50mm shorter than Z extrusions. x4 - M2 or M2.5 heat inserts x4 - M2 or M2.5 8mm SH x6 - M3 heat inserts x8 - M3x6mm BH x4 - M3x12mm - 16mm BH x2 - M3x8mm BH Only…
Please read before downloading: You will need to permanently modify a kirigami bed holder (voids waranty) Please use another design if you don't want to permanently modify your kirigami Stuff needed: Part Name Amount Required Printable?…
Remix of a great design, but that required M2.5 inserts. Now M2.5 bolts screw into ABS.
There is this bug on Kirin Type-A first batch, the mag could've been over inserted, and stops bolt closing. It is said the later batch would fix this problem by the manufacturer, but here is an easy fix solution: Just add this 3D printed…
Divider for accessory case "SIKIRI 20" made by Yamada Chemical. The box shape prevents small parts from escaping and is easy to replace. 山田化学製の小物ケース「sikiri20」用に作成した、小分け用の仕切りです。箱型なので小さいパーツが脱走することがなく、入れ替えも容易です。
Converts the Kirin angled talon magwell (from Shellington Labs) to be single dart loading. In prep for a no-mag event, I found I didn't have any old-school blasters at the right FPS. There's a single load mag block for the SLAB and that…
Print using PA-CF or PA-GF with at least 5–7 walls and 35–40% gyroid infill. Print the front part without supports—it is designed with sacrificial layers. Print the back part with supports, using the orientation shown in the orca…
This is a modular system designed for small rooms, its inspired by the Kokiris of the legend of zelda, this system allows plants to grow organically across walls, shelves, or desks. Each planter shares a universal body and connects…
It hooks in on one side and snaps into place on the other; I recommend printing it on its side, with supports, to prevent the hook from breaking, PETG works well
Need some Latin vibes in your body? Wait no more! Print you own Latin Kokoriko and feel the rythm! There are 27 Parts to print. 2 Grips and 25 percussion panels. Use the provided and corrent oriented plate STL to have them printed ideal.…
Stacking drawer shelves for the SIKIRI organizer containers (170 mm D x 233 mm W) commonly sold in Daiso and other ¥100 shops. Frame comes in two thickness - for 34 and 38mm Your choice of flat or tray top Stick the handle on the…
