167 models
Wargame Walls Collapsed Pipes Section 17 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Print approx. €7.63–€9.32 excl. taxPreliminary estimate for one variant
Wargame Walls Collapsed Fan Section 16 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Print approx. €7.77–€9.50 excl. taxPreliminary estimate for one variant
This is a test print I made up to test out a timelapse set up that I had. I spells out the message " I did it Wooooo" See the timelapse video below for the result. I referenced the Prusa blog on how to make a timelapse set up,…
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for one variant
This is a 3D Printed arm to make automatic motorized time lapses on a prusa mini using a webcam. It uses an arduino & 28byj-48 stepper motor as the basic power drive. More information, code and assembly on For more info, check out…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
With this piece you can use any headset with a button and use it as a photo trigger for timelapse. Adapted for Ender3 V2
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Rearranged the links so that they fit in a smaller area. Removed the top decoration. Made a longer version (56 links).
Description An affordable Arduino Turntable designed for Time lapse photography. It can also be used for Photogrammetry or Video by adjusting the code. By default it triggers the camera then turns a predetermined number of steps then…
A very simple adjustable GoPro mount for a rep-rap i3 style 3d printer. The mount sits between a bed screw and the Y carriage making it easy to swap without removing the bed. Perfect for timelapses since the camera moves with the bed. Any…
Made for, but can be used without, https://boardgamegeek.com/boardgame/361918/battletech-alpha-strike-boxed-set I wanted something to put inside the super nice cardboard buildings to give them more weight and also denote when they have…
The aim of this project is to provide an open source, top of the line camera slider for e.g. timelapses, that costs approx. $100. This project is somewhat advanced and requires several non 3d printed parts. This is to provide a slider…
Full details and how to build available via the Connected Environments Site at University College London - https://connected-environments.org/blog/allsky/
LIKE SHARE COMMENT!!! For installation on 30mm diameter hole on stock printer brackets (sheet metal). Sheet metal thickness 1mm. I have been using 4 bearing spool holders for a while but the spool fell over 2 times so far during long…
i needed a way to fix this shutter to the printer, as slick and nice looking the ender 3 s1 is, there arent any easy ways to fix it but i think i managed to create something useful. WHAT TO PRINT: you will have to print the mount…
my first Frankenstein make for time lapse without octolapse and standard shutter button. Looks ugly. but works. this is a remix of some two model, I don't have originals
So I wanted a simple armed clamp to hold the two surplus iPhone 8's I had; using one for timelapse and one for PrusaConnect seemed a GREAT idea, but initially I had to cobble together things with some phone holders that weren't intended…
An adjustable, yet lockable for mounting a webcam to a 3D printer. Modular and with various to suit multiple cameras and multiple printers, this system aims to be a perfect companion to Octolapse. Full instructions in the video:…
I wanted to test a new (to me) method for hinges. In addition, I received feedback on storage ideas on one of my other models. So I settled with this design. It is a model (or several combined ones that can also be used separately if not…
You can see the application video from the following link: Iphone EarPods; https://www.apple.com/shop/product/MMTN2AM/A/earpods-with-lightning-connector Resolution: 0.1 mm Infill: %30 Filament brand: eSUN Filament material: PLA+ Cold…
---First upload--- I made this attachment for fun to try out timelapse with my smartphone. It fits perfect on the ender 3 Pro without doing any changes! One “arm” that can press the botton and one “recever” on wich you mount the remote…
I did this with 0 top layers and 0 percent infill.
I wanted to attach my GoPro to the heat bed without the heat affecting the stability of the mount. You should print this with PC or at least PETG for heat resistance. PLA is no good for this, it will melt. It is a snap fit to the spacers.…
Hi everyone! I want to share my method to create "acceptable" Timelapses. Currently, i'm not able to create those brilliant/perfect ones that we can see all over the internet but i hope to soon find the good configuration. With this…
HOW TO MAKE 3D-PRINTING TIMELAPSE VIDEO WITH DSLR CAMERA Step 1: Getting the equipment IMPORTANT: Remote Triggering Mechanism is compatible with Pixel Wireless Remote Control RW. You can use affiliate links for shopping, if you want to…
3D print our snap fit case to house a Raspberry Pi 4, Pimoronoi’s 4-in HyperPixel display and the new camera module V3. YouTube Video Learn Guide https://learn.adafruit.com/pi-timelapse/ Raspberry Pi 4…
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm Filaments Used: Menetee Black Sunlu White Kaaber Red TTYD3D yellow Swap Instructions: Start with Black At layer #23 (1.08mm) swap to Red At layer #46 (2mm) swap…
Very easy to print, will work with pretty much any settings, no infill is required. The 3 towers don't actually ever converge but are held together at the base. Made for a good timelapse. https://youtube.com/shorts/6Ecei_eLhCM?feature=share
Overview The timelapse feature of OctoPrint is one of the main reasons I set it up on my printer. But, the image quality can be somewhat limited to what a webcam can provide. So, with some inspiration from other creators online, I…
Simple mount that clips over the frame to position for timelaspe of print. Position on side for fully self supporting print.
Smartphone Timelapse - Tripod Adapter pour IPhone 13 ou équivalent en taille
Got the full setup together, end result can be seen in the video below. The model I'm printing is the awesome Woven Pencil Holder by JamesThePrinter found here: https://www.printables.com/model/202588-woven-pencil-holder Finally got the…
I designed a mount that attaches over the X-end clip on the Prusa MK4 X-carriage so I could mount a camera using Sneaks' articulating mount system: https://www.printables.com/model/3407-articulating-raspberry-pi-camera-mount-for-prusa-m…
Have you ever wondered how to do high quality 3D Printing timelapses like this? Well so did I, which is why a spent a ton of time figuring it out so you don't have to! Makers have been showing off the 3D printing process with timelapses…
Timelapse Mount for Ender V3 SE/KE Models This design includes two separate parts (available as individual STL files or combined in a 3MF file) to facilitate capturing timelapses on Ender V3 SE and KE 3D printers. The components are…
This is a part I have designed to make it easier to mount my camera when making time lapses of my prints. I have found it difficult to prevent the camera from shaking when recording timelapses, this part should let me mount it using…
SIMPLE "NO-PRINT-HEAD" TIME LAPSE VIDEO PROJECTS for ENDER 3/PRO I always wondered how they vanish the print-head while taking stunning time lapse 3D print videos, until I watched related youtube videos. The method is quite smart and…
I wanted to record some timelapses, so i needed a stable mount You will need the following: 1x m5 nut 2x m6 nut that re inserted midprint Happy Printing! You can support me via a tip clicking on the link: Tip me on KO-FI by klicking here:…
About Slide on protector for the Quechua 2 seconds easy tent from Decathlon. Are you trying to sleep but afraid someone will play with your tent's quick-tear-down button? This protector will make you sleep safe and sound. Usage Slide on…
This is a Timelapse Clock Holder for Prusa I3 MK3S. It is fixed on the X axis. The button is designed by Stebo : https://www.thingiverse.com/thing:1570116 Print Settings 1 x TimelapseClockHolder1 : Layer:0.20mm Raft:no Support:yes…
Timelapse slider - version 2 This slider is successor of Timelapse slider for action camera which I made previously to make sliding timelapse video like this one: Slider consists of just a few mechanical parts (no electronics inside) and…
This is my way to perform timelapse with an old android phone on any printer. I have developed a choreography of movements that allows to minimize the stringing during the timelapse with the help of Cura's gcode post processing timelapse…
This is a mix between the Ender 3 S1 Pro Display Bracket Mount and the Flexible Webcam Mount for OctoLapse , to fix the Webcam support on the front right corner of the printer base. Category: 3D Printer Accessories
In smartphones, you can take pictures not only using the interface, but also using the volume keys. If you have earphones, you can use their buttons as a trigger to record a timelapse! Additional head movements are added automatically to…
Simple model to mount these https://a.co/d/j3AfXrr to the X axis arm on the Anycubic Kobra Max for DSLR timelapse. Use double sided mounting tape on the 3 flat surfaces to secure it. This sits right at X-400mm. My printer will not go…
You can use any filament except flex ones.
This is my setup for a window-mounted Raspberry Pi Zero 2 W timelapse camera. The hardware assembly (Raspberry Pi & camera mount) is attached to the window mount with screws, allowing you to tinker with the hardware and re-mount the…
Simple mount for a limit switch to wire a DSLR camera to your Neptune 3 Pro or Plus 3D printer to capture nice timelapes
Mini Spy Camera For this week’s project, I built a portable mini camera and In this guide, I’ll show you I how I built it. I think this is great for anyone looking to build a DIY project with a low cost camera. I’m using this to create…
https://www.youtube.com/watch?v=Qt__aRB9vD4 this tiny piece wich i designed using fusion is used to mount an endstop switch wich triggers a camera for taking shots every layer change, i used it for making my 3D printing time lapses.
I designed the stand for this specific LED Bar you can purchase on amazon: https://www.amazon.de/dp/B07DPJ1KXC?ref_=cm_sw_r_cp_ud_dp_C57NM2231KNCJF89B9P2 But it will work with any other light bar or profile that has the same dimentions.…
Ho voluto realizzare questo progetto per eseguire Timelapse con la mia Mirrorless senza dover necessariamente utilizzare Octopi. Il progetto è sostanzialmente semplice, un micro contatto viene premuto alla fine i ogni layer e macchina…
I like the idea from EddiePrints, but wanted a version where the Remote was not zip tied on, so i easy could remove it and use it somewhere else. Also wanted it on the other side of the printer. By this, you have to remove the remote on…
This is my enclosure design for the Arducam ESP32s UNO PSRAM board, a power switch, and 900mah lipo. I use this board to do timelapse videos. It gets over 24hrs battery life snapping 1600x1200 jpgs every 5sec, and the whole assembly costs…
Allows mounting of clocks inside a Bambu Lab so that time lapses can give a better idea of time taken by the print. The bracket mounts on a ledge that is on the opposite side of the camera. It had to be set in such a way that the clocks…
RU:Крепление было разработано для съемки таймлапсов. Я часто использую в своих роликах такие видео для наглядной демонстрации напечатанных деталей. И мне надоело ставить камеру на штатив. После нескольких случаев когда я уронил камеру на…
This is a bracket I designed so that you can take timelapse videos with your Elegoo Neptune 3 series printer using a DSLR camera. This was modeled in Fusion 360 and prints pretty quickly with some simple settings, There are holes for M2…
I had this idea that with a little planning and effort, you could add animation to your timelapses! I've included some files for you to play with.
Designed to be printed with TPU. DO NOT PRINT IN PLA, EVER!. PETG might also work in a pinch, although has a high risk of breaking. I used Esun eTPU 95A, which has been working perfectly fine for over 3 years. After printing, connect via…
this is a cool thing to print! Print instructions Category: 3D Printing Summary this is a cool thing to print! Print Settings Printer Brand: Creality Printer: CR-10S **Rafts:** Doesn't Matter Resolution: 0.2mm **Infill:** none Filament:…
This time-lapse camera was built using the ESP32-CAM. The following components are required. ESP32-CAMを使って作ったタイムラプスカメラです。以下の部品が必要です。 What to buy 購入するもの ESP32-CAM with motherboard マザーボード付きのESP32-CAM Use an ESP32-CAM with motherboard to…
I recently bought the LayerLapse Timelapse Camera Trigger (by Whopper Printing) and decided to design a case and sensorholder for it for my Prusa XL. I have also designed and included a centerfinder that will make it easier to frame and…
A working prolapse spoon for sheep. Might work with goats. Tested and lasted over a month in use with annealed PLA+ "Extrudr NXT2" After print sand it down with fine sand paper and clean well! Educate your self before use! Scale: X 182 MM…
Hello🖐. This is my take on a dolly system to make 360º timelapses during time-lapses while printing. The rail parts and the holder require thick walls for protection. I tested PLA and ABS prints and in the end, I preferred PLA for…
This is sort of an homage to a number of things and people. I really like the photo figure studies that Muybridge did at the turn of the last century (or two?) Duchamp is important to me in ways that it would take more than a few beers to…
Timelapse slider As next part of accessories for my Sony FDR 3000 I decided to make slider for timelapse movies. You can see on following example: Slider consists of just a few mechanical parts (no electronics inside) and can be…
Forking a part of another assembly as individual item https://www.printables.com/model/228470-single-bearing-spool-holder-w-timelapse-covers https://www.thingiverse.com/thing:4649148 It is intended to be a filament spool cover - wheel…
Timelapse trigger holder for d3v-163-1c5 microswitch. I suggest using long arm version of the switch. Will be triggered at X=0, custom G-code needed for timelapse (see below). Print clip side down, as show in print bed image. Clips can…
I have modeled a secure mount for the bluetooth button in place of the filament residue sensor for kp 3s pro. This is the tenth stable version, which has shown its result well. In order to make a timelapse, all that remains is to add the…
I was making a walking cane for a costume, but it needed to be able to collapse to fit into a backpack. This seemed to be a good solution to me. There are 2 parts, top and bottom, and they have clearance for a 4mm woodscrew to attach to…
Loved your design Teaching Tech, but as I use a Gopro for my Octoprint camera, I made an easy mount for it that fits your design :-) Category: 3D Printer Accessories
The idea starts from the assumption that every proud owner of a Prusa 3d Printer, sooner or later wants to modify it for his own personal use. LED, CAM, Switches, are some of the additions that each of us has already, or at least has…
Simple additional limit switch holder for timelapses designed for Ender-3 but compatible with any V-Slot printer. It can be easily assembled with M5 T-Nut and tuned for the max travel on the axis.
A timelapse dolly rig I constructed from an aluminum sliding rail I acquired long ago. The rail came with an aluminum sled, but I removed the slider bearings and affixed them to a 3D printed sled instead. I designed a belt tensioner using…
A bracket to mount a Bluetooth camera trigger to the X-gantry of an SV05/Ender-5 like frame. Uses leftover printer t-nuts and hardware to mount to the gantry well past the standard range of motion of the printer. Install it, adjust to hit…
I've been wanting to use my GoPro to make 3D print timelapse video's for a long time. Tried and failed a few methods using Octolapse but not enough support out there to use a GoPro (Hero8). Inspired by this Prusa guide about creating…
For the assembly you only need a limit switch, a wire, one jack 3.5mm connector, and 3 metric 2 screws. The following model is the one I have used:…
This very simple design allows you to create time-lapses of your prints using a Bluetooth smartphone remote. This design was made for the TwoTrees Sapphire Plus, but I will include the file in STEP format for easy remixes. Here is the…
This is a Box to store your LRTimelapse PRO 3 Timer Print instructions Category: Organization Summary This is a Box to store your LRTimelapse PRO 3 Timer
This print replaces two of the Prusa MINI+ parts with modified versions: A mount for the remote and a clicker to press the shutter button on the remote. Using a few lines of Gcode, this setup can perform Octolapse-like timelapses, without…
Zemistr 3D has created several videos on how he performs timelapses, which provided a foundation for how I wanted to approach it. After some testing, I developed this workflow, which differs slightly from Zemistr 3D's method. Check the…
Enhance your RatRig V-Minion 3D Printer experience with this Timelapse mod, designed to capture high-quality Timelapse footage using your mirrorless or DSLR camera. While not tested with smartphones, it may be compatible if you have an…
Otočná platforma pro pohyblivé časosběry. Foťák se dá na platformu upevnit pomocí univerzální Arca Swiss destičky (používám Peak Design Standard Plate). Srdcem všeho je Arduino Uno, ke kterému je připojený řadič ULN2003, který pohání…
This holds apple earbuds that have volume control. I used some hot glue and some failed prints to keep it in. I used an extra v-slot screw to attach it to the printer. I had to make it come over after every print and click the volume down…
迈克尔之前做的2020适配架，虽然是无螺丝方案，但是很大，而且只能装在特定的位置（ENDER 3），因此我在他的基础上修改了一个用M5+T型螺母来固定的版本。 Michael's previous 2020 adapter, although a screwless solution, is large and can only be installed in a specific position, so I modified a version fixed with…
This bracket holds a standard Cerality style endstop that can be positioned on end of the X-axis to trigger a DLSR camera for timelapse photography of your prints. Tested on Ender 3 and Lotmaxx SC-10, but should work on most printers that…
There are pegs for the microswitch to sit on, but I found them to be a little delicate so I just added some glue to the switch. Use m3x45mm screws to replace the existing 40mm countersunk ones. STEP file included Supports necessary Gcode…
Printed on its side in PLA with 25% infill. No supports needed
These are only the 3D-printed parts for building a remote shutter or a timelapse unit for the LX3 digicam. Micro servo SG90 4 cylinder head screws M2.5 x 10 mm 1 knurled head screw M3 x 10 mm 1 nut M3 PLA will do. My timelapse controller…
greeting hobbyist. I have model a bolt on no mod accessory for the MK3 that will trigger your camera app to take pictures using the volume button on your headphones. This style of taking pictures is very popular with the Ender series of…
Snap on switch holder for ender 3 to make timelapse videos with a DSLR camera, when the x axis go to 0 it take a photo. You have to insert this script in your slicer in the section: after the actual layer ends: G90; absolute positioning…
Timelapse with phone prusa mini/+ with bluetooth trigger remote control https://fr.aliexpress.com/item/1005001315484292.html?spm=a2g0o.order_list.0.0.19175e5byw0J8Q&gatewayAdapt=glo2fra G-code after diaper change ;AFTER_LAYER_CHANGE G00…
[Necessary parts] ・Screw M2x12 :2pcs ・Washer M2 :2pcs ・Nut M2 :2pcs ※Locknuts are preferred https://www.amazon.co.jp/dp/B01MXBS4MB/ ・Micro Switch SS-01GL2 https://www.amazon.co.jp/gp/product/B00ECVZ2MO/ ・Cable Tie W2.5mm ・Bolt M4x10 or…
I designed this fastener for the button that is pressed by the extruder after printing each layer. The button is connected via Bluetooth to a camera or phone. After clicking on the button, a snapshot is taken on your device. The button is…
When creating a timelapse using Octolapse in OctoPrint you will probably end up with stringing ( see wiki ) at the side where you move your extruder while taking the snapshot. You can use this tower and place it in the near of the…
Ony you need to du is glue the parts together. Print Settings Rafts: No Supports: Yes Category: 3D Printer Accessories
This is a button mount that can be attached to the X-axis wheel plate of the Voxelab Aquila. I'm not sure if it will work on the Ender 3 V2, but it might since they're basically the same printer. This will mount with the stock chassis…
I remixed Cube3dWorld's remote trigger holder for the Pixel remote ( purchased from Amazon ) to line up correctly on the MK4. I also created a new remote poker using Prusa's official Back Cover R3 for the MK4's Nextruder. NOTE : I'm not a…
