Counting matching models…
This cover/cap is for the Makita 18V X2 (36V) LXT Brushless 6-1/2” Plunge Circular Saw, model XPS01. The cover is very precise. It will keep dust from escaping through the side opening, thus improving dust collection. Be sure to check out…
This track was created using a pre-release version of MarbleLab: a tool that lets you design marble roller coasters in VR, test them virtually with simulated marble physics, and then export files for 3D printing. www.marblelab.io…
This is a replica of the dust cap with O-ring groove of an Apeks DIN regulator. This model was created after my buddy lost the dust cap for his regulator and was unwilling to spend around 10 euros on a piece of plastic. For me, that was…
A set of fully printable plunger tubes! These plunger tubes are a fully printed design that fits in standard TCs, Caliburns, Lynxes, etc, without modification to the blaster ! So far, there are plunger tubes in these sizes: 1.5" OD…
Simple 3D printable tube to replace a cracked plunger tube on an X-Shot Longshot. I recommend printing this with Orca slicer and scarf seams enabled to get the best inside surface finish. Attached .stl file and a .3mf file for use in Orca…
This is not my work. Found this on grabcad and I think it can be of use for people on this website.
Syringe plunger with 13mm end for use in 10cc Amtech flux tubes. I was fed up with trying to use a pen or my finger to push out flux, so I designed this! I recommend orienting the large end of the plunger to sit on the print bed so there…
Description Syringe plunger that can be automated using a microcontroller and a servo. The plunger is designed to fit a 100 ml syringe. Travel distance of the plunger could be increased in another version. Printing Can be printed with…
Dust collection shroud with vacuum attachment for Bosch 1617 plunge router base. Holes for optional 5mm LEDs.
This plunger / piston was created primarily for soldering paste from KOKI provided in syringe (40g / 10ml). It fits as well some other syringes with paste or flux, like in my case: Amtech Flux 10cc. Working length is 80mm (diameter…
Plunge router base plate for Bosch model 1617 2.0-2.25 HP router motor. Design based off factory design. (Can add fixed base design, depending on need/interest) This is a work in progress, as I am working on a series of designs and…
This is a dual-extrusion / multi-color remix of mrmacnology's outstanding design for a snap-in cover for the Makita 18V X2 (36V) LXT Brushless 6-1/2” Plunge Circular Saw, model XPS01. The cover body is identical to the original design, I…
These wall hangers hold either one or two Makita guide rails (tracks) for your Makita plunge saw (track saw) Includes counter sunk holes for #4 (4.0mm) screws to fix to the wall. IMPORTANT: The longer of the two hooks must go at the top…
Here is 22. cal pellet I designed for my Pellet gun, Warning! very loud and fast moving, Print on Face
A plunger for Dummy 13, to unclog the shit he causes
Plunger for the RS Pro epoxy gun, to work with 3M scotch-weld 2-part glues like DP8005. I printed this standing up in Sunlu White PLA+ with a 10mm brim and supports for additional stability. I've included the bgcode for a Mk4.
This case plunger design will allow the plunger to retract into the case column with a case in the plunge and not damage the case. NOTE: Currently only available for 9mm. However, I plan on offering plungers for other calibers as requests…
Bosch 1617 Router Plunge Base Dust Adapter
This cover plate closes the hole for saw blade change in the blade covers of the Parkside Plunge Saws PTSS 1200 C1, PTSS 1200 C2 and PTSS 1200 D2 (D2 confirmed in the comments by Lee Morton - Thank you, Lee) and should improve dust…
Plunger for the RS Pro epoxy gun, to work with 3M epoxies like DP2216. Can be printed standing up without supports!
This is one of the funniest 3d prints I have ever done. 3d Print should be easy. Might have to use supports
Mit diesem Upgrade zeigt die Makita Sage endlich die Exakte tiefe an der Skala mit Führungsschiene an. Einfach das Original Teil abschrauben und dieses quasi als Unterlage darunterlegen und die Schraube wieder montieren. Die Montage ist…
Simple wall mounts.
This package contains an applicator tip and plunger for the cheap Chinese made Amtech 10cc syringes, which are sold in bulk and come with neither. I'd been hot gluing plunger base from an old Global 10ml syringe with the rubber end…
Update May 10 2022: So it's been a year or so now since I made these. And I have to say, clearly no one printed it. I was reprinting in .10 layer height as well as printing thread into the pull instead of tapping it, just to refresh the…
Use the high power plunger for normal length K25 springs. The low power plunger should be used for the 788 spring, or 20 coils of K25 for a big power boost.
This dust collector port is for any vacuum port that has a ~1.25" nozzle on it. The neck is tapered to 1.25" about half way down, fits nice and snug. The hose pictured is the hose from the car cleaning kit for Rigid shop vacs. I wanted to…
This is a key for tightening the beiter plunger on your riser. Sometimes the space between the nut and the spring case isn't enough to fit the original key, so I decided to make my own! Cool adition to the original key it has a hole so…
Dewalt makes a really great plunge saw that runs on a track. To get full value, however, this track needs to be fastened to the material it cuts. The gadget to do this is a slightly modified version of a quickgrip clam that fits the…
Created a simple tool to help realign the piston on a Flair 58 manual lever espresso machine. I tested it on my Flair58 while fully heated and the tool seems to hold up fine printed with PETG, but use at your own discretion. Also works…
Este Plunger de 12 cm / 5 pulgadas, fue diseñado para ser utilizado en caso de emergencia o imposibilidad de salir a comprar uno a la ferretería. este dispositivo sirve para desobstruir inodoros o tuberías. Se puede usar con la mano o se…
This is a tray for a 6" flange style toilet plunger with 3" to 4" flange. The main part of the plunger sits on the fins with the flange held slightly off the bottom. I printed mine in PETG with a 0.6m nozzle at 0.3mm layer height with 10%…
A painting handle with a rotating platform that spins on bearings and is restricted by a ball plunger. The rotating platform is assembled with two bearings and a long M4 screw. I used an M6 ball plunger although it can be used without…
Plunge Router Adapter for Makita DRT50 Plunge Base which fits the Parkside Plunge Saw Track. Remove the fitted base plate and reuse the 4x M4 screws to fit the Adapter to the Plunge Base. The Adapter can be readily altered to suit other…
Stop for saw guide tails I made this stop for plunge saw guide rails it fits with the one from Festool and Makita. If the stop is flipped you can use it as a router stop. It is a quick print and if you want two it is a good idea to mirror…
Update May 3rd: Improved Freewheel and Pawls leading to better plunger action & longer coasting. Update May 2nd: Added new STL for Detonator box without text (Not pictured) Amp up your tabletop gameplay with this themed interactive dice…
Cover for the Parkside Plunge Saw (PTSS1200D2) designed to cover the gap on the side and enhance airflow for the vacuum cleaner attachment. This design is composed of several parts that are meant to be printed as a single unit. The cover…
The stock plunger did not press evenly on the cartridge plunger leading to enormous leakage at the back of the cartridge. I almost exclusively use the polymere cartridges from Würth (German professional hardware store) I used a metal…
A toilet plunger holder!! The g-code for the plunger holder base and lid both have Octogram Spiral selected for top and bottom layers which leaves a nice little design on those layers as an option to just smooth. Also, the base holder has…
also needed: spring 35mm 110N .7mm Misumi LM8UU LMU8 Linear bearing 3x M6 40mm Hexagon head 3x M6 nut 1x M6 60mm Hexagon head 1x M6 self-securing nut 2x 8x100mm smooth rods 4x shaft circlip T8 threaded
This is a fully functional 5ml syringe with tpu plunger. shells printed in vase mode for speed and plunger only 7 mins. 0 leaks and 100% holds liquids without droplets, pretty amazing… enjoy
The minimum plunge depth of the Festool Domino DF500 joining machine is 12mm when using any Domino size other than 4mm. When joining material to the face of 12mm plywood a plunge depth of less than 12mm is desired. This attachment for the…
Referenced SillyButts Plunger tube design to create a variant for the Ontos. 150mm long and OD of 35mm ID (with the plastic insert) is 32mm. Works great! I have tested it and barely noticed a drop in FPS compared to the aluminum tube. I…
A plumbing plunger in three sizes with a compact screw-in handle. Useful for cleaning blockages and clogs in all sorts of sinks and drains. Approximate base diameter: S - 100mm M - 125mm L - 150mm Every part is optimized to be easily…
PTFE-Schnellkupplungen zwischen MMU2S und Puffer Print instructions Um die PTFE-Schläuche zwischen MMU2S und Puffer möglichst einfach und schnell abzutrennen habe ich zwei Adapter für den S-Puffer zum Drucker (Typ C1) entworfen. Vor allem…
Fits 30mm Sanwa buttons without any modification to the button
The DZP MK2 foam dart blaster has a design problem the screw posts that connect the plunger tube to the slide grip are not supported by any webbing, over time they can crack or show signs of plastic stress. This part is meant to provide…
Quick clamp Plunge saw adapter for LIDL Parkside track *** Update 19May24 *** The track clamp had a failure when cutting down a door so it has been redesigned as Version 2. This now has side flares to strengthen the body significantly.…
You need 4 x 12mm m4 screws, the original ones are not long enough. Sand the surface with very fine grain paper.
Parts to make a pinball plunger for a virtual Pinball. Video of it: It makes a satisfying clank when assembled and installed. Requires the purchase of 2-3 springs, a switch, and a 1/2inch rod. In my build I used Qty 2 of 3" length springs…
Blue and black keyboard plungers for the Commodore 128. Blue is used for the function keys, black is used for the main keyboard. These are really only suitable for resin printing. Might work or be able to be adapted for other Mitsumi…
A plunger to get the flux or solder paste out of the syringe. Handy if your other one broke, or if you can't find it anymore :). Print Settings Infill: 25-100% (Depending on the nozzle and viscosity of the flux or solder paste) Brim: only…
Follow the print instructions and orientation for Ontos. Except for the back, center, ram and plunger head, everything else is the same as Ontos. Two obvious hardware changes: Plunger tube is 15cm 35 ID 38OD tube Use 30-35 orings or 123…
A remix of interactive3s design for my Dewalt 8mm palm router (DCW600) and plunge base(D262004).
Tube with plunger for Star/Heart-shaped Play-Doh Tube where you can insert the children's play-doh and using the plunger, push it and create a large Heart-shaped spaghetti ------- Tubetto con stantuffo per pongo a forma di Stella/Cuore…
2 piece model for easy printing. pieces fit snug, some de burring may be required. Designed for a 8mm x 2mm magnet. .2 layer height, no supports, infill 20% Assembled it measures about: 24mm wide at the base. 48.5mm tall with magnet…
This alternate catch and plunger rod system allows you to not need the metal plunger core that is standard with the zinc. I did this so I could more easily source my own zinc hardware as that plunger core is some non standard piece of…
Test video: https://youtu.be/dxtW75af_pY WARNING, RESULTS ARE WILDLY VARYING BETWEEN TESTERS. THERE IS NO GUARENTEE OF AN IMPROVEMENT FOR YOUR SPECIFIC BLASTER. Caliburn and TC plungers that have a sloped o-ring channel, similar to a CEDA…
Description osVAC Adapter for the Makita SP6000 plunge saw. However, it is rather a replacement for the original vacuum port of the saw to make the saw compatible with the osVAC standard. There are some adapters already available, but I…
Sink Mini Plunger, a handle to print w/ rigid material (PLA, etc) and two different cups (square, round) to print w/ TPU. I've printed both styles of cup, used several times, works well. Biggest variable is the size/shape of the sink…
These are the plungers and spring holders used for cheap Gel Blaster gear boxes on amazon and other sites. I remodelled them with exact dimensions and tested them to ensure they work. These do not come with the rubber bits. Use a…
A jig for gluing magnets to #gridfinity weighted baseplates. This is roughly the opposite of the Magnet Glue-Up Jig that assists in attaching magnets to Gridfinity storage blocks. Uses the standard 6x2mm magnets. Remix of kmeisthax's…
I wanted to make some custom attachments for my track saw, but i couldn't find a model or a detailed dimensions drawing. So, i sat down with a guide rail and calipers and made this in Onshape. Feel free to use it for whatever you want…
Simply mount the guide/jig on your plunge router and mark out the center on the material with a pen. Then drill a small hole in the center. Stick a pin/cylider/spike etc. in the desired diameter on the jig and place the pin in the drilled…
This model is compatible with the lego system.
With this model you can use the last dose (5th) of kwikpen of most brands. It's intended to use without break the pen in half, because this is difficult to do, only you need to remove the dial and insert the plunger. Due abuse in the past…
This plunge saw has 2 allen wrenches provided in the box. Unfortunately there is no storage for the wrenches (as far as I know, didn't read the manual ;-) ). So I created a simple holder to press into the grip.
1 in mini cake pop cutter and popper Matching tray to hold cake pop disks for keeping shape while inserting cake pop sticks.
This insert can be used to connect two Makita plunge saw track guides. It is convenient if you have multiple and want to cut longer stocks. My print settings: Prusament PETG Prusa MK3S+ 0.15mm QUALITY No supports 15% infill
Multi-devices beiter key : This tool was designed as a replacement for the key supplied with the beiter plunger. With it, you can tighten the beiter's plunger shoe, but also the nut, and, that's new, the beiter clicker. Easy to print No…
Made a 3 color model to replace the cardboard tokens in Mr. Torgue's Arena of Badassery. They can be used with the corresponding numbers underneath for the various scenarios utilizing them.
Sie brauchen noch einen D38 x d32 mm (32x3) O-Ring (Weich) , um einen luftdichten Sitz zu erreichen. Kupplung mit Sockel zum Anschrauben und ein Anschluss für 40 Durchmesser Rohr. Verbinder, mit Links- Rechts-Drall Verbinder, mit…
Die NEM-Slots bei H0m sind auf 6,5mm Höhe vorgesehen. Zum Ausgleich gibt es verschiedene Varianten mit Höhenabweichungen v10 bedeutet +1,0mm Höhe. h50 gibt eine zusätzliche Länge von +5,0mm an. Die TT- zu H0m-Kupplugen können für eigene…
Fit a DeWalt drill (model no. DCD777) into a handheld router punge-base. You now have a handheld drill press.
This is a slider style whistle which uses a pill-shaped plunger/slider to change the tune as you blow into it. Here's a vid to see what it sounds like (with the older style plunger slider): Here's the one I originally designed for an ABS…
This is a finger grip, modeled after some of the older syringes. It's meant to slide onto a syringe and give you enough of a grip to help you push the plunger down. It was modeled to fit over a 11.7mm barrel and the finger holes are 24mm…
redesign of plunger and plunger rod in a style more akin to Sillybutts designs (rectangular instead of round); therefore much stronger and easier to print. Modified catch assembly to accept rectangular plunger rod. Plunger tube changed to…
This is the Chimera Plunger Head for the latest Sillybutts blaster designs. It is compatible with the Alchemist , the Wildstyle , the Foxbat and the Battle Axe . It uses the same hardware as the plunger head of the above mentioned designs…
Edit 3/26/2021 Added a v2 plunger. Made it a little bit taller to it doesn't rattle as much and modified the geometry of the stem. Left both versions so you can print out both and decide for yourself which one fits your needs. If printing…
Silicon gun Plunger replacement, with 8mm diameter that can be change with fusion configuration table.
Makita DRT50 cordless and RT0701 corded ¼" routers plunge base. Slides into track requires two holes to be drilled and tapped.
osVAC suction adapter for Makita RT0700 Plunge Base 195563
Hey guys, I'm trying to eliminate as many non-printable parts from my designs as possible. On my journey to conquer this noble quest I tried a few approaches to get rid of the PVC tube, only to find out that Sillybutts had already solved…
This is a plunger intended for solder paste tubes like the one shown below that are normally sold without it. The plunger is printed in one part and you break the support structure of the moving part once it is printed using a small…
This is a set of replacement plungers for Baolian 30mm arcade buttons sold at Microcenter. The labels are embossed so they can be filled in with model paint. Acrylic also works well and is easier to clean mistakes, but is less durable. I…
This is a plunger for the 3M DMA 50 dispenser. This dispenser is made for the 3M 2 part adhesive Duo-Pak cartridge. With this plunger, the 3M dispenser can dispense Loctite 50mL (50g:9g) SEMPAK cartridges. I printed in PETG, 0.4mm nozzle,…
Print in PETG or PLA (better in petg) Infill 45% Layer 0.2mm
My drill press broke and I needed straight holes, so I made a simple adapter to fit my drill into the plunge base of my router. The diameter for the drill is 43mm, for the plunge base it's 65mm. My drill is a Makita and my router a Katsu…
Fits 24mm Sanwa buttons without any modification to the button
Tired of the same old stash containers? Take the plunge and give this mini plunger a whirl! I know, I know... it's a little goofy and it won't actually unclog anything. But I had fun making it and I hope you have fun with it too. This…
Dont put your plunger on the floor thats gross, use this tray its less gross. Just resize for your plunger if needed. This fits a plunger 152mm so resize as needed I will include the Gcode, Stl, Blender files. You should be able to resize…
This uses the DDD Printable Wall Control System ( github ) to mount the saw. This is designed around the Makita XPS01 plunge/track saw. The geometry on the 40V XGT base plate looks pretty similar in the photos, so it may work for that one…
Hello everyone! This is a Nerf Rayven that I converted from a flywheeler into a plunger tube and spring powered blaster. Back in 2011 when I saw a very grainy leaked picture of the Rayven on NerfModsandReviews, I got so excited by the…
I have scaled this plunger down to 10cm (most Australian toilets bowls are smaller than U.S ones) and added a handle with a cap to either hang it up or just hide the screw hole. If you want a really long handle you can print 2 handles and…
8,5mm über Schieneoberkante ist ein wichtiges Maß für Kupplungen und Schächte nach NEM 360 und 362 für Modellbahnen in H0 aber auch für meterspurige Schmalspurbahnen in H0m. Bei H0m wird teilweise statt 8,5mm eine Höhe von 6,5mm…
DF700 Real bit length 90mm Domino bar space 77.25mm Domino bar thickness 22mm diameter Notes: DF700 Real bit length 90mm 4mm bit length 79.25mm (10.65mm shorter than the rest) Base shim to zero depth 62.00mm For 1/2" plunge, bit needs to…
These syringes full of UV glues have no manual way to dispense the material inside. Instead they want you to buy a gun that costs more than the glue ($15 to $40). That's fine if you are using it to often like to make a living. So I…
Broke the little plastic holder pins for our window screens, so needed some replacements and the options on the internet didn't look quite right. These are the plastic pins that you push in to keep your window screen in place. The model…
Dog chewed your Jolts handle?Just looking for a new upgrade perhaps? Not a problem! This is a redesigned plunger assembely for the nerf Jolt, serving as a stock replacement aiming to meet and exceed original performance while making…
![Gridfinity Magnet Baseplate Jig (with plunger) [Remix]](https://media.printables.com/media/prints/656253/images/5172236_beac793c-60d1-46b2-a0c7-0e44f2f88b1c_e619d996-d2d0-4292-b3fb-12b96c46a0ce/img_2222.jpg)
