17,187 models
Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3S with MMU2S unit build from Ikea LACK table. Check the article with build instructions . NEW After a lot of asks, the STEP file is available for download in…
Print approx. €4.10–€5.02 excl. taxPreliminary estimate for PETGSource material: PET
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
This is a tool that does an excellent job at cleaning your rod. It clamps snugly on the 8mm 3D printer or CNC leadscrew, you can remove your hands and let the printer do the rest of the work. This is meant to be used on any printer with a…
The model of the tension meter helps you control the tension on the belt of your Prusa printer. It's specially designed to check the tension of your Prusa printer's belts. It works with Original Prusa i3 MK3/S/S+ with the belt GT2. How to…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
IMPORTANT NOTE: 3D-printed plastic screws will break. Because of the way a 3d printer works, and the way the screws are typically oriented during printing, they are very weak. Things like printing in PETG, adding more perimeters, and…
Author: Prusa Research (Vlado Turek)
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
Importatnt note: Model will only fit with the Prusa MINI version that has the old Z-bottom plastic part version. Even though the Original Prusa MINI+ is a compact printer, sometimes you might feel it takes up a little more space than is…
6/10/2023 - 2.7 posted. Thanks to SuperRoach for pointing out the floating pieces in PrusaSlicer. With the latest PrusaSlicer RC1, it renders the bottoms of the gills on the left side of the head floating. That wasn't the case previously.…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
Prusa Steel Sheet Holder for 2, 3 or 4 steel sheets. Print instructions Print in PETG or PLA with 0.3 layer hight and 5% cubic infill. Added a new, wider steel sheet holder for 2 sheets.
My MK3 printer stands on an Ikea Lack table, which is an excellent amplifier for the vibrations of the printer. So I designed these feet, and they do a good job without making the printer too wobbly. A low profile version and a small…
This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…
This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame. Check the step-by-step guide on how to install the…
Print approx. €5.10–€6.23 excl. taxPreliminary estimate for PETGSource material: PET
Testing file
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Light bar for the Prusa i3 MK2/S and MK3/S/+ available in single light, dual light, and MMU2 compatible dual light versions. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
This is the well known Temptower from Tronnic as .3mf to load into PrusaSlicer as well as sliced and ready for the Prusa Mini. Just print the gcode. All gcodes were created with PrusaSlicer 2.2.0 using -) PrinterSetting: "Prusa Mini"…
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant
It seems like a lot of folks on reddit have questions about getting their first layer height properly calibrated. A big part of the problem I think is that the prusa first layer file only has one little square at one location. So I made…
I simply took the STL file from the Prusa Knowledge Base and reworked it to fit the print bed size of the Prusa Mini. https://help.prusa3d.com/en/article/bed-level-correction_2267 Important Information about sheet markings FAQ Sheet…
Printable spool holder for Original Prusa MK3S+/MK3 Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of collision between the extruder and filament holder.
Print approx. €5.01–€6.12 excl. taxPreliminary estimate for PETGSource material: PET
Prusa released the printable parts for MK3s+ and the fan shroud is much better than the stock one of the Mk3s, so, for everyone who don't want to fully upgrade from Mk3s to Mk3s+ but still would like better cooling, I cut the second…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
Simple tool for lubricating LM8UU bearings. Print instructions New version! We found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
A side drawer for Mk3 I3 Edit 2021-01-29: Add the file for the left drawer. Edit 2021-02-01 : Addon to make it easier to assemble (nuts_helper_tool) Edit 2021-02-02 : Add No support drawers with 45° handle (files have 45d in name) Edit…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
A variation of our rocket engine sample model with added side nozzles. It's printable completely without supports. If you own the Original Prusa MK4S, CORE One, or CORE One L printer, you'll find pre-sliced version of this model on the…
Print approx. €12.76–€15.60 excl. taxPreliminary estimate for one variant
Author: Prusa Research (Vlado Turek)
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
This holder for the Prusa Mini power adapter/supply, uses very little material and takes short time to print. It is designed to use with a countersunk screw of Ø4mm with a Ø7-8mm head. The two brackets provide great support and require as…
This temp tower will start at 230 degrees Celsius and will end at 190 degrees. It's better to print with a higher temperature at beginning and go lower. I added a new file with temperature from 230 to 200 degrees. You can use this file to…
Print approx. €1.85–€2.27 excl. taxPreliminary estimate for one variant
Z-axis brace to stiffen up the Z-axis of the Prusa Mini 4pcs M5x12 and 4pcs t-nuts for mounting, optional is a M5 washer (10mm OD , 1mm thick) Thick version need 2pcs M5x25 and 2pcs m5x12. UPDATE : Added .f3d file for remixing purposes..…
Print approx. €6.32–€7.72 excl. taxPreliminary estimate for one variant
Printable 2kg spool holder for Original Prusa MK4. The spool holder was specially designed for Orignal Prusa MK4 and Prusament 2kg, but it can be used for any spools. Perimeters: 2 and more, Infill: 30% rectilinear.
Print approx. €5.66–€6.92 excl. taxPreliminary estimate for PETGSource material: PET
**This print is modified for 0.125 inches (3.175 mm) thickness acrylic sheets!** Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3 with MMU2S unit. Check the article with build instructions:…
I like my LCD cable neatly organized, even when it's less visible on the bottom of the Mini(+). I liked Fredslund 's Prusa MK3 LCD Cable Clip on my MK3S, so I remixed it to use for the LCD cable on my Mini+. Like the original, they pop…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
This print-in-place box is designed to be printed on the Original Prusa XL , combines different types of materials.
Print approx. €4.54–€5.55 excl. taxPreliminary estimate for one variant
1-6mm retraction tower that takes about 30 mins to print. Feel free to customize the gcode and edit the M104 command with your desired temperature. Credits: https://github.com/kartchnb/AutoTowersGenerator
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a low profile side mounted spool holder that can be removed, other designs are attached with T nuts. Version 2 spool holder is closer towards x-axis (see pictures) Added a filament guide to spool adapter. Tall prints tends to…
Print approx. €10.09–€12.33 excl. taxPreliminary estimate for one variant
This is a remix of https://www.thingiverse.com/thing:526854 by https://www.thingiverse.com/mitchellharvey
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
This special Prusa Edition of the TerraPi SSD Case for the Raspberry Pi is to celebrate the 2 year anniversary of the release of the original TerraPi SSD case. The model prints without supports in under 2.5 hours. Best used materials are…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for PETGSource material: PET
Replaces the PTFE holder (screw on compression thingy), with M10 couplers. You will need PC4-M10 passthrough fittings like these. https://www.amazon.com/gp/product/B01IB81IHG/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1&tag=tv-auto-20…
I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
Here is my take on the Prusa CORE One MMU3 —introducing the Community version ! This setup mounts the entire MMU3 unit directly on top of the printer, with an integrated buffer and spool holders. In addition to the printed parts (you'll…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for PETGSource material: PET
This model was uploaded on makerworld but did not work with prusaslicer very well. I painstakingly repainted it for 2 color mmu printing on my Prusa XL. Enjoy
Print approx. €10.15–€12.41 excl. taxPreliminary estimate for one variant
Reverse bowden IR Sensor Cover for the MK3s I have included 3 versions one for the PC4-M10 pass through connector and another for the PC4-M6 connector. I have now added a version for the PC4-M5 connector. Edit 19/2/19: I have added a M5…
Update (July 13th, 2022) After receiving feedback about mounting the shield and the occasional break, I have decided to strengthen a few parts of the design to prevent breaking during support removal, slipping off the left mounting point,…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of Frank Deschner's moon lamp to work on the Prusa Mini. I have always wanted a moon lamp and seeing that the only files available were designed for larger printers than the Prusa Mini, I tried to modify an existing design…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
This holder makes changing filament one arm operation again and makes the printer tidier. Primarily intended for our farm, where spools are hanging from the top, but you can use it even on the table with spool behind your printer, just…
Print approx. €1.34–€1.63 excl. taxPreliminary estimate for one variant
A boomerang for your entertainment. Print instructions Throwing instructions Hold it between your thumb and index finger. Tilt it about 45 degrees outward from your body. Throw it against the wind.
Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…
Filament guide for Original Prusa i3 MK2/MK2.5/MK3/MK3S Print instructions Category: 3D Printer Accessories Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0,2 Infill: 20% Filament: Verbatim PET-G…
From orginal author Test for VFA in all directions at speeds from 40mm/s to 190mm/s. At every notch (5mm apart) the print speed increases by 10mm/s. You must use the gcode file; the 3MF is the PrusaSlicer project. I'm uploading this gcode…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
A few boxes to store your items The box under the bed is made for the Allen key, wrench and spare parts for the mini. The other box for what you want ! Boxes are made to be clipped onto the aluminium extrusion. Ribbon cable has to be…
Print approx. €7.02–€8.58 excl. taxPreliminary estimate for PETGSource material: PET
This is a modification to the Original Prusa I3 MK3/MK3S Einsy case that implements appropriate housing for a Raspberry Pi 1B+/2B/3B/3B+/(4B - Now available as the first download ). This part allows for one of the aforementioned Raspberry…
Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…
Prusa Mini LCD backcover Print on it's flat face with supports Installation: First, unplug the LCD display cable on the back of the PCB. Then remove the 4 m3 screws holding the PCB in place, and slide the printed cover panel in. Reinstall…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
These thumb tabs mount underneath the heated bed. Allows easier removal of the steel sheet in the same way that the MK3 works. Print instructions Must be printed from PETG due to high temps. Part is best printed vertically on one side, no…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for PETGSource material: PET
LCD Cover for the Original Prusa Mini. Protects the screen while you don’t use the printer or covers up the light at night when you are sleeping in the same room. Print it in any material or color, just make sure it isn’t translucent.…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
A mount for installing a Prusa i3 LCD controller on the outside of a LACK enclosure. Compatible with MK2 and MK3 LCD assemblies. Not compatible with MK4 LCD assembly. Description This is a redesign of zamky's Prusa i3 LCD Holder that…
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for PETGSource material: PET
Author: Dominik Cisar https://www.prusaprinters.org/social/7/prints The Man. The myth. The legend. Little Josef Prusa Character, designed at the occasion of the Original Prusa MULTI MATERIAL UPGRADE 2.0 release. The model consists of…
Print approx. €11.48–€14.03 excl. taxPreliminary estimate for one variant
Light bar for the Prusa MINI. Mounts are designed to fit 11x24mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look. Mount also includes an opening to insert a…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
PrusaLock: The Ultimate 3D-Printed Portable Door Lock Overview Introducing PrusaLock, the fusion of 3D printing technology and travel security. Designed to give you peace of mind during your journeys, this portable door lock is easily…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
Keep your Prusa i3 steel sheets organized and dust-free with this sturdy, under-table storage solution. Designed for all recent Prusa i3 models with a standard bed size, this holder will not fit the Prusa Mini due to its smaller bed…
The standard Prusa i3 MK3 spool holder is almost totally vertical which makes it take up the most possible space in the height direction. I had a height restriction due to the shelf my printer was going to sit on, so I designed this as a…
Print approx. €4.84–€5.91 excl. taxPreliminary estimate for one variant
Printable Sheet Holder for your Origginal Prusa Enclosure for 2 or 3 Sheets with one Tool Holder (allen key). Update 01.12.2022: Added a slot to insert a square nut. Square nuts come from spare parts. STL files with the _nut extension.…
Print approx. €10.27–€12.55 excl. taxPreliminary estimate for one variant
EDIT 21-Apr-2023: Added an Voron-Edition: https://www.printables.com/de/model/458704-tool-box-toolbox-for-voron-3d-printers-several-ver EDIT 20-Apr-2023: Added an Ender-Edition:…
Print approx. €4.53–€5.54 excl. taxPreliminary estimate for PETGSource material: PET
If you find value in the model provided do consider supporting me with a small donation: paypal.me/Tomax77 Hope you like it ;)
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Remix of Squash ball feet for Prusa Mini. All brackets bolt into aluminum extrusions and support the electronic's box. Highlights: Massive Noise Reduction Improved Stability (Lifting the magnetic sheet won't tilt the printer) 6 Support…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant
I've added the nozzle tool changer that works with the fan shroud on.
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
I found that there is well known idea to use squash ball for 3d printer feet for anti vibration. I made this model for my Prusa i3 mk3 by myself, so this is not really a remix but pretty much inspired by existing nice designs such as…
Check the new version: https://www.prusaprinters.org/prints/82892-prusament-sorting-tower-mk3 The sorting tower is made for filament PM spools and Prusament Spools. The draws are made for spiral vase mode, in order to reduce used…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for PETGSource material: PET
Update 04.01.2022 This design was highly popular ever since I made it on a long winter night. Despite the fact that it required manual thread cutting to get it's M4 inner thread, users of the Prusa Mini liked it a lot. That was reason…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Light bar for the Prusa i3 MK2/S and MK3/S/+ compatible with the MMU2/S. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look.…
Print approx. €3.77–€4.60 excl. taxPreliminary estimate for one variant
I was looking for an Raspberry Case that could fit the Pi and a Stepdown (Buck) Converter to power the Pi directly from the power supply of my MK3S. I couldn't find anything I like so I decided to create my own. I designed 2 versions of…
Print approx. €4.59–€5.61 excl. taxPreliminary estimate for one variant
I wanted to improve the plastic input to my extruder, because just with the original spool holder from prusa the spool wobbles a little bit due to the friction between spool and holder. After a quick search found thousands of ideas, most…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
I wanted a bin for the side of my Prusa i3 MK3*s to catch the filament that may droop down while the nozzle is heating, then fall off the left side of the printer as it goes through the auto-leveling sequence. These small 1-2" strings of…
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the sheet mount, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray…
Print approx. €14.42–€17.62 excl. taxPreliminary estimate for one variant
Printable spool holder for Original Prusa MK4.
Print approx. €4.45–€5.43 excl. taxPreliminary estimate for PETGSource material: PET
The mounting is done by clipping in the bracket and can be moved forward or backward if necessary ... I thought I could print the bracket I had designed for the Prusa MK3s. It fits too, but very tight, so it is very difficult to move.…
This is a remix of the Tool Box Parametric by Yanev, scaled and modified to be printed on a Prusa Mini. The key changes are: Scaled down to fit on Prusa Mini printbed All hardware mounts modified so that M3 sized bolts can still be used…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple dust cover for the Z-axis mounts. They drop in place, and prevents most of the debris from falling into the Z-axis mount opening. Update: People noted that the clearances wasn't working perfectly anymore, so I checked the…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
This SVG file goes with mcpea's 3D model of the printer made for PrusaSlicer, which although excellent was missing a proper build plate texture. More exactly, this file replaces the black build plate texture with the big white FLSUN logo…
Print approx. €3.29–€4.03 excl. taxPreliminary estimate for one variant
This is an adapter that allows you to convert an empty Prusament plastic spool to a master spool. Motivation I love the concept of the master spool, but it's quite a heavy print (6+ hours for part B, 12+ hours for Part A). I saw that the…
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for PETGSource material: PET
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [ANNOUNCEMENT Oct 7, 2024] I just confirmed - the xRivet also fits the Original…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple mod for your MK3 to use it as a penplotter. The main design objective was for it not to interfere with printing and to not have to assemble or disassemble any parts to change from one to the other. I tested multiple…
Print approx. €3.95–€4.83 excl. taxPreliminary estimate for one variant
I recommend using balls with blue dot; they are the hardest. ACCESSORIES Prusa CoreOne/+/Gen2 You will need 4 M3x6MM screws to fix them to the lower frame; this one has 4 threaded holes in each of the 4 corners as standard. Prusa…
Print approx. €8.13–€9.94 excl. taxPreliminary estimate for PETGSource material: PET
Based on the extraordinarily accurate model created by Thingiverse user kimgooni . I did some small invisible simplifications on the model to save a couple of hours of printing support structures. It results in 16 hours of printing with…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
A filament indicator for Prusament classic spools (non NFC) . Update 2026-01-27: Added v2 with small corrections on weights, added TPU To be placed over the 4 consecutive fully open hexagons (see picture). It snaps in the hexagons around…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
Complete rework of my original Prusa MK4 / XL xLCD Knob Beauty Ring to work with the new injection molded parts from the MK4S, XL from 09/2024 onward, CORE One and CORE One L. Printed in Prusament PETG Prusa Orange 0.1 IS Fast Detail
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
I remixed this model because I had a collision with the connection of two frame parts on my Core One. To fix this, I thickened the contact surfaces slightly and moved the camera a bit further inward. This now allows for a secure fit,…
Extension for the USB plug. Specifically designed to fit this 90° cable ( UP -USB 3.0 Male to Female variant, see the picture), but will probably work with other similar cables too ( like this one ). You don't need any additional…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
RPi 'Z-BOX' The RPi Z-Box, designed for the 3B & 3B+, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…
Print approx. €6.61–€8.07 excl. taxPreliminary estimate for PETGSource material: PET
I didn't like the weight of the spool on top of my printer any more So I designed an adaptor to use the original spool holder that came with my MK3, which adapts it to mount on the side of the printer. An easy print part, I printed mine…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a quick and easy way to remove the PTFE tubes from the back of the Prusa MMU2S. I found that loading filament and clearing jams is so much easier when those tubes can be easily removed. The material doesn't really matter, as…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
This a guide for your Ptfe tubes on the top of Prusa enclosure. I make it for my (un)original prusa drybox systeme. 5 Spool rewinder adapter for MMU2S / MMU3 in (un)original Prusa drybox :…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
This thing is originally designed by RH_Dreambox on Thingiverse . Thank you to him for putting in the hard work to make this print great. Posted here with conspicuous credit. This fan shroud was designed with Autodesk CFD to create better…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
parts size adjusted for easier storage
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
It's specifically designed not to wiggle, as pre-existing LCD cable clips for the MK3(S) did and thus were unsatisfactory to me. The opening of the "hook" should point down for a clean look and easy insertion of the LCD-cable. If this…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
This is a 3D printed keychain design of a Prusa Filly assistant. It is a miniaturized version of the popular paper clip character present in PrusaSlicer. This keychain is made to be attached to your keys or bags, serving as a cute…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
USB holder for Prusa Mini Print instructions USB holder for Prusa Mini ..my remix from https://www.prusaprinters.org/cs/prints/15544 needed M4, T-nut, USB 3 cable angle Bend Up, 25-30cm, ex.…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
I noticed that the hotend fan creates a draft in the area of the nozzle when operating. With some technical materials, you really don't want a draft on the printed Model. This cover prevents the draft. At the same time, the guard protects…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
These are larger versions of the cable passthrough tube used for mounting the power supply and/or LCD controller outside of the Prusa LACK Enclosure V2. _lack_cable passthrough provides enough room for the power cables as well as a USB…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
For those of you with the X axis that is WAY OFF here is something to fix that. I printed many parts on my Mini but noticed some striping on taller parts. So when I got Octoprint setup and ran Bed Visualizer it was pretty obvious what the…
Print approx. €3.31–€4.04 excl. taxPreliminary estimate for PETGSource material: PET
