Counting matching models…
This box is designed to enclose an ESPSomfy-RTS remote, an ESP32 based project allowing you to control Somfy shades over WiFi or via HomeAssistant (see YouTube video ). The case can also be used for any radio project consisting of an…
The screw is now reverse thread, so counter clockwise screws it in. you will need to glue the clip to the body, i use epoxy. I added an extended clip, this pushes the dispenser out away from you, - i found that my clothing was getting in…
Hardware case for ESPSomfy-RTS Project by rstrouse (thanx!) Integration for Homeautomation (as e.g. Homeassistant) for radio controlled Somfy Shades, Blinds pp. >> Project see https://github.com/rstrouse/ESPSomfy-RTS Case is for using…
Desk size model of United States Postal Service mail bins. Can be used for desk objects such as business cards or candy
Grumman LLV (long life vehicle) I've finally figured out how to model the interior so it doesn't need supports. I plan to revise my other previous models to make them easier to print. This print doesn't take too long or use too much…
A simple USPSA target for dry fire practice. *If you use this with a real weapon make sure it's unloaded. Matter of fact follow Coopers rules! I take no responsibility for stupidity or negligence. ALL GUNS ARE ALWAYS LOADED NEVER LET THE…
A go/no-go gauge for 141.25 mm and 171.25 mm magazine lengths for various classes of USPSA competition. See here for proper use. Prints on a 180x180mm (Prusa Mini+) bed at 45 degree rotation. Recommended layer height of 0.2 mm.
how to build All sensors are from Sensirion. They all use I²C bus. The two little ones can withstand 3.3V and 5V, the PM sensor needs 5V. I choose to operate the little ones at 3.3V to minimize their heating. The SCL and SDA wires can be…
I remixed Ronald Cauldillo's excellent step van model into a mail truck. I leave these in my mailbox for the letter carrier at Christmas. Consists of 13 stl's. Can be printed all at once, or the body and the tires/windows separately. I…
This trap cap for PET bottles is designed to attract and capture wasps and hornets effectively. It uses a sweet bait solution to lure insects into the bottle, where they become trapped and unable to escape.
(4) M3 x 4mm x 5mm inserts (4) M3 x 12mm screws (1) 25mm magnet, 4mm mounting screw. I went with a covered ~30lb strength
A case to connect a Sensirion SEN5x series air quality sensor to a D1 mini for wireless reporting. Based on the mechanical design-in example for SEN5x & SPS50 .
For Halloween 2018 I put together a Monster Maroon Jacket from Star Trek The Wrath of Khan. Here are the accessories I modeled just for this jacket: Pip Pins (2 kinds) Working Jacket Clasps (4 part assembly), Captain Rank Belt Buckle Back…
Miniaturized target for dry fire practice at home. Target mounts into a single or dual bracket configuration. I put the brackets in a cheap telescoping tripod / selfie stick from Amazon - makes adjusting height super easy. Target is blank…
This is a simple case for an ESP32 with enough space to use dupont cables on the pins. It is designed to hold a standard ESP32 DevKitV1 board and a CC1101 transceiver module. The ESP32 and transceiver were hot glued into the cases. The…
Click Here for a link to the item this is designed for so you can compare Classic USPS Mail Truck is now available for your Jiabaile 1:43 RC car! Inspired by the legendary Wheelie Yellow Printed with Inland PLA+ Here is a link to the…
This enclosure was built to house a Sensirion SPS30 (particulate matter sensor) and an Adafruit BME280 (temperature, humidity and barometric pressure sensor) for an outdoor weather station. The goal was to have an enclosure that could be…
Mini United States Postal Service (USPS) Standard Collection Box Receptacle (Blue Box) that uses a vintage Post Office (PO) Box Door. Can be used as a mail holder, change bank, or display piece. The back piece is not completely…
USPSA target model at 1:6 scale. Zones A, C, and D. It can be used as a template/stamp to make dry-fire targets from cardboard. For 1:3 scale 200%, for 1:4 - 150%, for 1:10 - 60%. Edit it online https://www.tinkercad.com/things/exZFxWmPk3z
Remixed the housing from JT https://www.thingiverse.com/thing:2820147 in order to support: ESP32 Feather Huzzah with 2.4" TFT Wing Bosch BME280 sensor Sensirion SPS30 sensor Source code can be found here:…
I ONLY ship via USPS. Show off your love of the USPS or your mail carrier with this really cool "Love USPS" 3D logo! Make sure to print in two colors to make it pop! Follow me on https://instagram.com/superherodiy Category: Signs & Logos
A simple collapsible measurement box sized to USPSA competition dimensions. Inner dimensions of the box as-printed should be 8 15/16" x 6" x 1 5/8", with tolerances (+1/16", -0"). Note that these pieces are sized to print 41.4 mm high and…
Target Stand for USPSA/IPSC/PCSL/IDPA Target stand for 1in x 2in sticks and split in two pieces to fit on the X1/P1 build plate. If using outside, it is recommended to print in PETG. The two pieces are held together with two wedges…
Einfaches Übergangsstück im Osvac System für die Absaugung des Triton Spindelschleifers
USPSA Target Stencil by Qwerm A spray paint stencil to make full size USPSA targets from cardboard. Included is the stencil split into various different sizes so it can be print on different sized printers. The stencil can be printed in…
USPSA 1/6 Scale target for dry fire Takes (3) 3x6mm magnets
Took the model from fkm492, added screw holes for the C1101. Keeps the module better in place, with the antenna weight.
This KRYDEX USPSA mag holster only fit 1.5-inch belts and couldn't find ones for my thicker 1.75 inch battle belt that I normally use, so I designed my own backing that accommodates thick belts. You'll need 4x 14mm M3 bolts for each back,…
This is a target stand I made for 1x2 furring strips. It was inspired by this model from CitizenGreyArms: https://www.thingiverse.com/thing:5448274 The only functional differences are my part is more light duty, uses about half the…
Buttons will fit most overalls. There are 2 different sizes, depending on what you prefer, and how much of the overall clasp you want to hide. Feel free to message me if you need a different mount size. Magnetically attaches with 3x6mm…
Replacement keys for antique United States Postal Service and National Park Service rotary counter locks. Models made from original keys. Scans of original keys provided for reference. There are newer models of the USPS rotary counter…
Ori decorative lamp, adapted from the original source https://sketchfab.com/3d-models/ori-c97e93c9d89f4a36988252b1cf2f3737 Modified in Blender. Print Settings Rafts: Yes Notes: It is important to set some tree supports under the legs and…
Adjustable magazine carriers for USPSA/IPSC belt rigs. Mounting to a TekLok-compatible clip (consider the PipClip, also in my designs, for a printable option), they can be adjusted for camber and toe, to allow tuning of wrist and arm…
This a wall mount for the perversely bright Bosch GLI 18V-10000 C. This should also work for a Scangrip Nova 10 SPS, since the Bosch GLI is a derivate of that lamp. The holder has to be less wide for the 6k and 4k versions. Feel free to…
Also required: Secures the Radio Module M3x4 2x Clamps the case together M3x8 or M3x10 4x #8 Screws to attach to a wall if need be.
USPSA target keychain/ bag tag with two alpha hits. Emboss with no more than .4mm lettering to add name, member number, or whatever to the bottom of the delta area. 3 walls anything above 15% infill will be plenty. I've used rectilinear…
Clip on Rail for retrofits to mount S7-1500 Siemens SPS components on a old S7-300 rail. Toolless mounting via clips. Can be used to remove a whole SPS assembly. Use two or more for longer rails. (Be careful with using screws to secure…
Wanted to paint my own targets instead of buying some when I have cardboard laying around everywhere. I used IPSC / USPSA Targets measurements. Yes, there is only the A and C boxes. But, I figured if I am in the D boxes, I need more range…
This is just a simple handle to be tapped onto a file tang, I printed it out of PTEG with 40% infill, and I recommend light taps for the install. I've also included the CAD files for any adjustment as needed.
These are simple clasps that can be used to close “Munchbox” and “Yumbox” style lunchboxes. Both of the original clasps on these lunchboxes broke, and I found that replacing them was not straightforward, particularly when trying to manage…
This is a wallmount, designed to fit the Scangrip Nova 4 and it's derivative Bosch GLI 18V-4000C. It's tested and works fine. It will probably also work for the 6000lm-Version. For the 10.000lm-Versions, i would advise to use my other…
This is a small USB powered speaker designed to run ESPHome and link to HomeAssistant. I use it to play rain sounds as a sleep aid and it triggers automatically by automation. The ESPHome YAML file provided allows for a timeout to be set…
A Bracket to hold a Sensiron SPS30 particle sensor. The Bracket can be glued onto the SerialCarrier of the SensorBox (V2) . The Sensirion SPS30 is only snapped in. The Bracket respects the design rules from the Sensiron datasheets and…
SPST Square Rocker Switch (12mmx18mm) Housing with Power Supply Port. Designed as an enclosure for low DC voltage systems. Print at 100% infill with supports enabled. If you like what I'm doing here, please consider making a small…
Credit Card-sized Phone Stand (CCsPS) Tired of having your phone stand flop around in your wallet? Here comes this one! Unlike other phone stands of this size, not only do you not require multiple materials, but also it doesn't require to…
This is a dispenser designed for 2000 piece 20mm patch rolls made by Eemann Tech. Clearance of 0,2mm for all parts except the locking surfaces which have 0mm tolerance. Would recommend using PETG or ABS/ASA for locking tab durability over…
This adapter is meant for SPS30 particular matter sensor. It allow to use it with SDS011 mount holes. Of course - device has to support SPS30 since it has different protocol than SDS011. First version - it will require modifications.…
For mounting 10x15mm SPST 2Pin rocker switches on the Radiomaster Pocket. See the rest of the mods I made in the upgrade of my Pocket - https://flip4pocket.tiiny.site
USPSA target cookies (and/or the cutter) can be used for dryfire practice. Give it to Santa first. PLA while food safe, if non-sealed, shall be discarded after the use. See also…
A handy device for checking letters before you send them. Anything that doesn't fit through the slot doesn't qualify as a letter and will need extra postage, going either as a large envelope ("flat") or as a parcel. See the Domestic Mail…
After having found a Asian Hornet nest in my backyard, I decided to look for a trap solution. That is when I found the model from BartG40. However, since I wanted to make use of some plastic bottles I had around the house, I decided to…
Big, heavy, weighted tape dispensers are, so to speak, indispensable, and they last forever. But the spindle core, that the tape refill fits on, goes missing from time to time. You can buy them online, but I don't think I've ever seen one…
Project page : https://www.klosko.net/blog/=clanek=airqmonitor-monitor-kvality-ovzdusi (CZE)
Intro Enjoy your favorite drink outdoors without worrying about unwanted visitors. The Anti Wasp Cap is a simple and practical bottle cap designed to help prevent wasps and other insects from entering your bottle while you're not…
I designed this model to mount a 12V amateur radio power supply and a dual band radio. This design takes the equipment off my desk as well as making it easily accessible. I also added a mounting place for a Anderson power pole expansion…
What you need: 2x M8 Rods 150mm or 200mm 4x M8 Washers 4x M8 Nuts 4x Bearings 608 ZZ Printer: Own Build ndl V2 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Generic PLA, PETG, ABS doesnt matter Notes: I printed it in ABS
whipped up on a whim for a necklace I made when I realized I didn't have any claps. prints without rafts or supports.
This case is designed to be used for the ESPSomfy RTS controller and is compatible with the following components: Transceiver https://www.cdebyte.com/products/E07-M1101D-SMA/7 Seeed Studio XIAO ESP32-S3…
Building conversation pieces: several parts for USPSA addicts. Having 4070, 6141, 3941 (as well as, 30132 and 92738) on hands might be useful. See https://printabrick.org/ if not. Category: Toys & Games
Purchased some cheap SPST switches for a flight sim build however the buttons are white or red. Easy to print at 45 degree angle with supports.
We designed a custom measurement boxes according to the rulebooks with 7.5mm thick walls for increased durability. Rulebook internal dimensions for the box 8 15/16” x 6” x 1 5/8” 8.9375 x 6 x 1.625 in 227.0125 x 152.4 x 41.275 mm…
Original https://www.thingiverse.com/thing:5356923 These are the seperated files. MM files no longer have color change.
It should fit these buttons tightly: https://aliexpress.com/item/32873378875.html I printed them with support on base plate only and organic supports (0.2mm top contact z distance) and some filament changes between layers to change colors
A right hand and right foot silhouette. both are 3/8" thick. The foot has a spine with reinforced holes for long nails up to 1/2" diameter and large chamfers to help the head sit below flush as well as channels to aid in removal. The hand…
Adapter for dust extraction of Triton TSPS 650 (36mm outer diameter) for Bosch Click and Clean (C35)
Nahradni matice k Bazénovému čerpadlu SPS75
Nice and good quality DC power supply for your shop. Good CZ review here: My supply is SPS-H305 (30V / 5A), but it should also fit for SPS-H3010 (30V / 10A) version. Screw distance is 179 mm (for a bracket) by 164 mm (between brackets) if…
Let me make one thing clear to start with, I did not approve of the name Flag Nipples . My wife and friends called them that and annoyingly, the name stuck… I much prefer “cloak clasps” but there you go… Use case: So anyway, what happens…
Adapter for the target stand to accept Dimensional 1x2 lumber (Actual Size, 3/4 inch thick by 1 1/2 inches wide)
Scangrip Halter für Manfrotto Leuchtenstativ - Hält Nova R bis Nova SPS 6 Wird lose aufgesteckt. Die Leuchte wird eingehängt und kann gut verstellt werden. Nova R hält am besten, da der Bügel gummiert ist. Fotos zeigen Nova R und Nova SPS…
SPS mount that replaces regular frag plugs. (Right one on the picture)
After finding big problems with smaller ESP32 clone boards (WLAN antenna on a ground plane!), I built one using a full-size ESP-WROOM-32 with the WLAN antenna clear of other parts for good range (which is why it is horizontal, unlike…
This is a 2-part indoor housing for the WeatherDuino Air Quality Monitor III with Sensorion SPS30 for particle measurement, MH-Z19 for Co2 measurement and 1.3 inch OLED. You can find information about the WeaaterDuino here:…
This truck needs no support. It has a hole in the top for the wire hook. If ambitious, you can paint the lettering and/or the USPS Logo. The logo and small print are better suited for printing with an AMS, if you have one.
Hold doors, cabinets, sliders, etc closed. Four models: Angled, 4 magnets Flat, 4 magnets Angled, 2 magnets Flat, 2 magnets Magnets are friction fit. Align two corners, then press uniformly. A table edge can help. Printing PLA/PETG 0.2mm…
Case for the Sparnäs Receiver/Gateway board that was designed by Anders Helin. The lid clicks in place by friction / layer-lines binding. I printed mine in PLA, with 0,6mm nozzle and 0,3mm layer height for fast print speed and it works…
I made a keychain set of Wisps (Vtuber Maid Mint/Mint Fantome's fan mascot) to celebrate my first 15,000 likes on a digital art of Maid Mint🥳
🐝 Disclaimer: I didn't have any opportunity to test this model, because already we are using the homemade model (with a bottle) and I don't have access to the printer this month. I just saw what we use and what others create and I hope it…
It is a model of a usps truck. The wheels do not move.
Lid clasps for V700 and V600 Vault Pelican cases. Pin and spring from original clasp needed, do not know a source for these parts.
Replacement handles for files, rasps, chisels and scrapers that came without one or have split their old handle. A swelling barrel grip with shallow flutes, and a neck that takes a short offcut of 22 mm copper pipe as a ferrule so the…
Just a box to help stop quick rip and pull theft from USPS Small Flat Rate Boxes
Simple 4-sheet magnetic mount for the left side of the Prusa CORE One. Uses 15 (!) round magnets, 8mm x 4mm.
Printable file in OBJ or STL format created to give a home to the wasps that live in my vineyard and allow them to always stay with me.... if they didn't have the saccharomyces contained in their saliva they wouldn't produce the right…
Printable file in OBJ or STL format created to give a home to the wasps that live in my vineyard and allow them to always stay with me.... if they didn't have the saccharomyces contained in their saliva they wouldn't produce the right…
Cut List (all emt sourced must be 3/4 Trade size (Nominal .922) I gotr mine from home depot or lowes 4× 3/4 in EMT legs: 10 1/4 in each 1× 3/4 in EMT center tube: 18 7/16 in 2× nominal 1×2 wooden target sticks: cut to desired target…
Cílem tohoto projektu bylo vytvořit jednoduchý model, jenž by znázorňoval fungování jaderné elektrárny.
This is a cover for “Krydex” style magazine holders available online and used for shooting competitions like IPSC, USPSA, IDPA, ASI. They are printed in PLA in three colors (No AMS required) using a 0.2mm layer height and swapping the…
Past je navržena jako nástavec na běžné zavařovací sklenice. Je ve tvaru trychtýře, nad kterým je upevněno původní plechové víčko, které chrání past před dešťovou vodou. Pro odchyt slimáků je potřeba past umístit do vyhloubené díry v…
Each of these little wisps come with a mounting hole fit for either a hook or an LED, and takes less than an hour to print. Happy 2025! --- I've invested countless hours in design, testing, and engineering to make all my projects and…
I really liked the original model for this OtterBox-compatible stand, but it had one major flaw: it kept tipping over whenever I put my phone in vertically. I know there are already 20+ remixes of this out there, but none of them felt…
WARNING! chokinghazard fillament can get off while you are eating
This is the art from the last USPSA Major Match I ran in 2019. I had the Adobe Illustrator file, and exported the 3 color layers into .svg format, and imported into TinkerCad to do some layer masking to create stl files for doing a…
This custom-designed mount is specifically created for securely installing the BTT Smart Filament Sensor V2.0 inside the rear panel of a Voron 3D printer (such as the Voron 2.4 or Trident). The model ensures optimal alignment and…
USPSA magnetic targets 3"x6" w/ 2x 1.5mm x 10mm magnets in the back. Great for decoration or further training of transition and acquisition. These are originally printed in PETG and even though the magnet pockets are slightly oversized…
Clips onto a standard drink can and gives it a twist-open lid, so wasps and flies cannot get in between sips. WHAT YOU GET • 01_Kutu_Ustu_Govde.stl -- can-top body • 02_Doner_Kapak.stl -- rotating cover • 03_Snap_Pim.stl -- pivot pin •…
I was running into some issues with some prints and needed a smaller test case for rapid printing.
Smallest enclosure for SPS and SCD sensors. On the side is optional mounting (M3 bolt) for DHT or other sensor which would have better accuracy for temperature and humidity. The SCD can be influenced by heat from the ESP32-C3 Super-mini…
A handy device for checking letters before you send them. Anything that doesn't fit through the slot doesn't qualify as a letter and will need extra postage, going either as a large envelope ("flat") or as a parcel. See the Domestic Mail…
![[Iteration 2W] Credit Card-sized Phone Stand (CCsPS)](https://media.printables.com/media/prints/526596/images/4255928_93f1707a-f421-40cc-98a6-888fb5fd298e/dsc04249.jpg)
