Counting matching models…
PROJECT PRESENTATION This project is a tripod allowing to maintain a phone in all possible positions thanks to a ball joint . The assembly is done without any screws , which however does not affect its robustness. The goal for me is to…
This is a standard camera screw, as included with most tripods. The knurled headplate is a real stress test for FDM printers. ;) Due to the tiny dimensions, I recommend printing it using the highest resolution/lowest layer height your…
We designed this to mount cell phones of any size to camera tripods, even if you have a phone case and a pop socket attached. The best part is that it is almost 100% 3d printed! You just need a 1/4"-20 hex nut and, optionally, two short…
This update is based on Gavitka's remix of the updated original Modular Mounting System . This is a remix of the clamp of the Modular Mounting System . I really like the clamp but I wanted to be able to mount it on a tripod. So I add a…
Hi, https://twitter.com/Mkukkk is here :) Here is my list or requirement for a 3d-printed tripod: No need to buy additional parts. All parts should be printed in one night in one go. Thick design for reliability. No supports. No small…
Updated: 2024/07/29 Added 180mm version (Silverstone AP181, mounting hole spacing 165mm). Updated: 2024/06/09 Remodeled the outer surface so now it can be scaled to more different sizes without making the shell too thin or too thick. It…
This updated version of my Zoom Phone Tripod tilts to any angle, including tilting forward for those awkward zoom yoga classes. Collapses nicely for storage. This version fixes a few issues: the legs snap into place more firmly, the jaws…
I wanted to print my own nuts & bolt for my camera and tripod. With Fusion 3D it is very easy to create them, but once you print you have to consider also tollerances. I tried few times and at the end I found that you have to reduce the…
Print both parts. I used PETG. You must not use support for “gopro tripod part 1” For the second part you can use support but only on the underside (I used “support on buildplate only” and increased “XY separation between an object and…
This is a mini tripod for cameras. WHY? I wanted an small tripod that would be able to carry a DSLR in portrait and landscape mode. Many 3D printed tripods where either too small or not stable or didn't support portrait orientation. So I…
I brought a new phone a while ago and I wanted to print a Tripod to take pictures of the night sky. However, I didn´t quite find anything that I wanted, so I decided to design my own. This is my first project I upload so I don´t really…
Cameras are attached to tripods and such using bolts in the American Unified Thread Standard , specifically UNC 1/4-20. Historically, the more colourfully named British Standard Whitworth thread was used, but market forces in my…
Remix of Folding tripod for Portable Phone. https://www.thingiverse.com/thing:2813597 Add mount for vertical and horizontal grip. For more information you can play this video: You may also liked some of these projects:…
1/4 zoll Schrauben und Muttern für Kameras und Stative. Die langen Schrauben können mit FreeCAD auf die benötigte Länge gekürzt werden.
I designed this phone holder to with the idea to have minimal parts and print time and no support. The base can be mounted on a tripod with a standard 1/4 - 20 unc screw. It is advisable to print the knob with at least 50% infill and…
Steve5092 made a pretty good tripod, but his sleek design also needs more supports. Since I gave away my old one, and had to print a new I thought I'd make one with flat sides so it's easier to print.
A ball jointed printable tripod. This is a new version with the following updates: Now supports both landscape and portrait! Legs are slightly longer for better stability The tripod base is more streamlined with less sharp edges Improved…
A ball jointed printable tripod. Check out the new version of this! https://www.printables.com/model/177685-phone-tripod-v2 Measure the width of your phone (or google for its specs), and select the closest size Phone Clamp. If you use a…
Facts first: ultra compact, only 120x32x22mm when packed, wide clamping range of 64 to 84 mm, absolutely stable, no wobbling, assembled and packed in just a few seconds, optional container, ideal for traveling and hiking, doubles as phone…
This is an adapter I designed to fit in the pole mount that comes with the Starlink Mini that has a ¼-20 thread insert in it to attach to any tripod or other camera mount (ie clamps, suction cups, really anything that uses a ¼-20 screw).…
1/4-20 screw for use in a tripod mount socket. Designed as a screw I'd downloaded from thingiverse was too long, and the shank was slightly larger than the threaded portion - so it wouldn't pass through the other part. Used for the…
An influential ship, with a storied history and record, the USS Tripoli is a great little desktop model. The model aims to provide a sufficient level of detail to be realistic and interesting as a desktop model, but not so saturated as to…
A conversion kit for the BOG DeathGrip Tripod that allows you to use a ball head instead of the included swivel head. With a ball head, you can level the tripod without having to adjust the length of the feet, this allows for much faster…
Remix of the ESP32 Cam case by mojocorp . I really like their design, however I wanted the following. Printable without supports Room for Dupont connectors Tripod mounting hole Increased rear rim thickness The shape of the original looks…
Tripod mount inspired by hog saddle. I printed it with PETG and 100% and have printed a couple and all of them are still whole after a couple of years hunting and shooting. In the pictures it's the v1 version that now has some minor…
News: I meanwhile designed an ultra-compact complete travel tripod for smartphones. Check it out! Description: This is version 2 of my “Smartphone Tripod Adapter” . It has been improved in two main points: the center of gravity of the…
Tripod hızlı bırakma plakaları evrensel değildir. Bu, en çok kullanılan ebatlı üründür. @Farklı ebatlarda ürüne ihtiyacınız varsa @en geniş yan ebatlar 44*44mm
Someone challenged me to make a working model this existing product, so I made it printable. You can print it or better yet buy the real thing https://pocket-tripod.com/ use the code PRINTABLES10 at checkout on official website to get $10…
Thingiverse has a number of great tripods but I couldn't find a good ball head, so I created this. It'll handle up to a small DSLR with a short lens. It has 3/4" tripod threads top and bottom, and I've included printable adapters for the…
Let's be real, a DSLR isn't in everyone's price range. With advancements in technology, modern cell phones can produce images that you would be hard pressed to find any flaws with. So why not use a tripod? Simple mounting system that…
Sturdy tripod with modular mounting plate. I included smartphone holder (PhoneHolder_(1-3).stl) and mount for 1/4 inch camera bolt (Plate_QuarterInch_Bolt.stl). For those who would like to create their own mount for their device i…
Thanks a lot to @Noname_Engineer for that great GoPro tripod model. I was too lazy to go out to a hardware store and buy thread parts. And I also needed a trippod mount very quickly (stores were closed). Because of that I just added the…
Update September 12 2022: Added CAD Step files. An adapter to fit onto a 42x48 tripod mount. Uses 8 10-24x0.5" screws and nuts. No supports required. Recommended infill of 20% for a rigid piece. May need some tape to shim the adapter…
This is the 3/8" version of my ¼" camera/tripod screw. It has just the same outer dimensions (length, headplate) but, obviously, a different thread (and, according to that, a thicker shaft that adds some stability). The 3/8" UNC thread…
Arca swiss tripod plate. includes source, also for combining with included gopro mount. The main file has a slot for inserting a ¼-20 screw. I like the ones with a d-ring handle that have a shaft around 10mm long. Adafruit sells one…
I remixed this tablet tripod mount and made the following changes: Increased the thread size on the post and nut for an easier fit. Redesigned the main post for horizontal printing without supports. Redesigned the clamp to match the…
This can be used to mount a 3/8" camera onto the more common 1/4-20 UNC tripod thread. Alternatively, you can use it as a way to get a high quality 1/4-20 thread into a model printed at lower resolution, or printed with the thread on its…
I need a simple tripod for Insta360 camera selfie stick. So drew this. You'll need: 3x M3 16mm screws to use without nuts 3x M3 22mm to use with M3 nylock nuts 1/4"-20 10mm camera mount screw Print one hub and three legs. I printed in…
Hi, this is a remix of https://www.printables.com/it/model/132242-zoom-phone-tripod/files for fit my webcam on an adjustable tripod. I've added a ¼" screw on the base. Just print 3 plain legs, 1 ring and 1 base infill 20-30% no support…
Pretty simple design I made to mount my 360 camera on top of my mirrorless camera. I haven't printed it since I don't have access to my 3D printer at the moment, so feel free to give me some feedbacks.
This is a tripod. Compact when folded - diameter is 4cm (38mm) and length is 17.5cm, extends to 45cm, manages to hold a smartphone (around 250g) + 1.5kg weight while fully extended (and 3kg+ when not fully extended), though I wouldn't…
Mobile Phone Tripod Category: Mobile Phone
This is an adaptor to convert a GoPro mount (either side) to a standard 1/4-20 tripod mount. Print instructions Category: Camera Post-Printing A 3/4 inch 1/4-20 bolt is pressed into the mount base and a 1/4-20 screw can be glued into the…
PRINTABLE TRIPOD Simple but functional tripod with a maximum extension of about 1,30 meters, design also includes a 3-axis head. BILL OF MATERIALS PRINTED PARTS All parts doesn't require supports, also STLs are already oriented for…
Quick howto print planeur15_crochet.stl, preferably in PETG, in vase mode with 0.18 layer height, 30mm solid bottom at 20mm/s with cooling fan enabled at full speed. print lanceur.stl normally in PLA (0.15 layer height, 2 perimeters, 10%…
Meet the Mighty Mini Tripod—your pocket-friendly sidekick for steady shots anywhere, anytime! Designed to be compact enough to slip into your pocket but strong enough to hold its ground, this little marvel is built for creators on the go.…
Updated 2023/11/06 - Added a versions to support a M6-1.00 x 10MM Hex Head Cap Screw Bolts This is a Remix of Tripod Base of the "Zoom Phone Tripod" to allow for the attachment of a 1/4" x 3/4" Stainless Steel Hex Bolt. I first tried the…
Hi, here you'll find a screw to mount your equipment if there is no tripod available. 5/8" - 11 thread. You can use a 19mm wrench or a 8 mm hex-wrench / Allen key. It's head diameter is 22 mm. You can find the fitting nut in my model…
This collapsible tripod for your phone will handle all of your Zooming needs. It's easy to print, requires no supports and no additional parts. Features: -The three legs simply snap into sockets in the tripod base -A screw ring is use to…
A simple tripod mount for the Logitech C270 webcam. With so many churches needing to stream services because of the COVID-19 lockdowns, and a shortage of webcams, I hope this will help someone deploy their old C270 - a decent camera,…
Hi, here you'll find a screw nut to bolt something on your tripod. 5/8" - 11 thread. You can use a 22 mm wrench. It's diameter is 30 mm on the bottom. You can find the fitting screw in my model library… Hope you like it! cheers, Köter
The Mini Tripod for DSLR and Digital cameras offers a full 360 degree rotation plus 180 degrees of tilt and is exactly what I was looking for specifically for 3D scanning. It also locks down well, once you add the noted washer to the deck…
A better more robust version of the GoPro tripod mount (with an editable file) This GoPro tripod mount design provides superior strength and durability and outperforms all vertical designs. Optimized for the strongest printed orientation…
This is a very practical smartphone stand / tripod, wich is perfect in many usecases. For assembly, you will need: 1x M5 65mm bolt 2x M5 25mm bolt 3x M5 nut Feel free to share your own experiences with the community! This smartphone stand…
This is a mount for the Autodarts scoring system by ROBBEL90 . https://cults3d.com/en/3d-model/gadget/steeldart-score-system-wie-autodarts It has the exact dimensions so aligning everything is fairly easy. Can be printed on a 220x220 bed,…
printed with 80% infill with PLA and 0.1mm layer hight
This is a generic removable tripod mount. This measures at 43.5mm squared. This is to replace or in addition to a stock removable mount with use of a 1/4in screw + washer. This has been tested on a Merkury Innovations tripod. The irony of…
This is a GoPro compatible tripod mount. Print instructions To assemble you will need an M5 nut a 1/4" UNC brass threaded insert Warm up the threaded insert with a soldering iron and push into its place.
Fairly simple adapter from 1/4 20 screw to GoPro/Action Cam mount It's already threaded, no need to tap it. Print and screw in For best results print at 0.2mm with 100% infill There is a cutout for a standard M5 nut Print Settings Printer…
I've been setting up a macrophotography and video station for some time where I can take shots in a controlled way, but the biggest difficulty I always come across is lighting. Almost always, in this type of photography, global and…
This tripod is made in 2 pieces: Main Body Leg (Print 3 times) This Model can be printed without supports. I recommend the use "super glue" to glue the legs to the main body. 3D printing settings Body: Resolution: 0.2 Supports: No Infill:…
there are still a lot of changes required. If someone can remix this figure - and the single pieces to make it really printable, that would be great :)
3D printed Mech-arm Tripod. Inspired by @FukyArt and his model https://www.printables.com/model/647794-flexible-sturdy-phone-arm-100-printed Additional screw and nuts here: https://www.printables.com/model/928482-bolt-nut-bracket-set Mech…
This is feet (legs) for the Insta360 invisible selfie sticks, remixed from Mini Tripod 150mm by DiAleksi. With this, you can give your invisible selfie stick (monopod) feet so that it can stand the Insta360 camera upright. I use this for…
A connector piece between your Canon camera and your tripod. Incase you loose it or if you need a replacement piece. Made in Fusion 360
This phone mount is inspired by the Universal tripod phone mount designed by neyfrota , however I designed the model from scratch in OpenSCAD with the aim to make it more versatile and stronger. Mount it on a tripod, place it on a table…
<Description> Ultra small Pi Zero Case with Pi Camera V3 Module for Tripod. Target Pi Camera model: V3 Standard V3 Wide V3 NoIR V3 Wide NoIR <STL List> PiZero_case_8_1_Zero_Case_withPiCamera_Top is Top Case.…
On the pictures you can see the first version. In the files, the models are improved and functional. The individual parts have to be glued together as shown in the pictures. It is difficult to screw the screws into the screw handles, but…
This phone tripod mount is compatible with phones ranging in width from 68mm to 115mm. It has been tested with an iPhone 12 and an iPhone 14 pro max. A few rubber bands are needed to properly attach the smartphone, which you can easily…
Printing Speed: 120mm/s Bed Temperature: 60º C Extruder Temperature: 200º C Wall Thickness: 3-4 wall lines Designed for a 32mm (1 1/4") pole. Tripod_Collar_32mm.stl Tripod_Leg_32mm.stl Directional_Collar_32mm.stl Directional_Arm_32mm.stl…
Build a stick/tripod for your GoPro or camera with this project. SLICING TIPS FOR FUZZY SKIN. Add a modifier to the “LEG” file, do not use the standard Prusa Slice modifiers, but a special modifier that is in the file list with the name…
Inspired by Kernel770's tripod I re-designed it from scratch. :) The camPad is printed in flexible TPU and the rest in ecoPLA. The 1/4-screw is held in place by a small piece of filament glued in place by CA-glue. Support is recommended…
A simple phone tripod for photography. Notes: Use 3 perimeters for the Base.stl. The others are fine with 2. Orientate the parts correctly to avoid need for support (the default position is not correct for a few parts...apologies) BOM 4 x…
Needed a ¾" 20 pitch screw for the Modular Tripod Handle designed by @FredrikHamrebjorkDes ( https://www.printables.com/model/247650-modular-tripod-handle/ ) so I bashed one together in Fusion360. It's designed to be a tight fit through…
This screw can be used to mount the Raspberry pi hq camera using my "Raspberry Pi HQ camera mount x-axis for Prusa I3 MK3/S/S+". The length of the screw is 18 mm.…
This tripod phone holder is designed to fit any standard tripod, making it perfect for capturing photos and videos in both landscape and portrait orientations. The assembly is simple, with only two non-printed parts required: two 1/4-20…
I previously had printed a GoPro tripod adapter that utilized the GoPro quick release clip. However, I have a small tripod with its own quick release and just wanted to adapt the ¼" tripod thread directly to the GoPro, so I drew this up…
Heavy duty tripod ball head for small and large format cameras. Needed something for a 6x7 camera and DSLRs. I printed this in Carbon fiber PETG. Make sure that there are no supports placed in the threads as this will mess them up. Firmly…
Maybe a bit more difficult to assemble, but I tried to make the parts as simple as possible. The tolerances are just right, I wanted the parts to be able to rotate. You lock the ball joint with the middle and upper ring and adjust the…
I have a tripod with the Velbon QB-4W Quick Release Plate. So I remixed these two components together to have a cell phone mount for my Google Pixel 2. A bit overkill for what I needed, but a fun little project. Supports are not required…
When photographing competition models, I realized that lighting the model is very important. In order for your 3D model to look perfect, it is important to illuminate it well. When photographing, I use my daughter's LED lamp - lighting…
Just used 2 things to build a portable Logitech C270 webcam tripod and added a base. The base should be printed with 3 walls, support and bridge enabled. The empty space in the base should be filled with some metal (I used lead) to give…
A basic 6 inch (150mm) long tripod extension with 1/4-20 thread at both ends. Diameter is 1 inch (25mm).. simply screw onto you tripod to add 6 inches.. This is perfect for a short tripod that just needs a little more height to get your…
Introduction I often look at certain objects and think to myself, “I could 3D print that.” However, after starting the design, I quickly realize that it might be more challenging than expected. This is one of those projects. To ensure…
This design is actually a bit of a spin-off from my tiny tripod ecosystem: https://www.prusaprinters.org/prints/37671-tiny-foldable-tripod-ecosystem-for-different-actio After I got my GoPro Hero8, I first added a GoPro specific part to…
This is a Tablet / Ipad mount for a Camera Tripod. It is for a 1/4" thread
I printed JSund's mount for my webcam and quickly realized I didn't have a screw to attach it. Made this screw and it works perfectly on my Logitech webcam. Printed at 0.2mm layer height in PETG. Use grid infill at 1-20%. Per feedback…
This is an XS version of the tripod I re-designed inspired by Kernel770's tripod. It was primarily designed for those with really small 3.5in³ printers and has shorter legs. In all other aspects it is identical to my larger tripod. It can…
EDIT 03/04/2023 Added f3d and STEP files so these can be remixed. __________________________________________________________________________ Designed a system of parts to create a means of mounting the Hadley to a tripod in a very sturdy…
Print instructions The recommended material is Prusament PC Blend Carbon Fiber Assembly Description List of non-printed parts 2 pcs - M5 Hex Cap Nut GoPro knobs are in three different lengths for screw: M5 50mm screw with hex head M5 40mm…
This model is still V0.9 because I'm still doing some improvements, as soon as you see V1.0.0 in the title then that means I'm happy with it. This print requires a well calibrated 3D printer as it relies on tight tolerances to be printed…
Streamcam holder for tripod with joint. You need a threaded insert M3 (Ruthex) and a screw M3x18. The hole below is a core hole for 1/4 inch tripod thread. If necessary, I also have a lower part for the Ikea "Antifoni" lamp. Dismantle the…
Hi guys, seeing the telescopic tripods that you are probably familiar with I was wondering if those can be 3D printed. So I've devised a snap lock mechanism which might be similar to those telescopic tripod but this one can be 3D printed.…
Mount your phone to an Arca-Swiss compatible tripod I combined the extended version of JakeJake's phone mount with the Arca Swiss plate by JohnClark The slider and knob are unmodified from the original design 1/9/2023 update: Several…
READ BEFORE PRINTING! This is a non-commercial print, this means you are not allowed to sell files or prints of this model. ______________________________________________________________________________________ What is this? A modular…
It is not much use on its own, but feel free to add your parts and attach them to a tripod!
If you own several cameras you don't want the hassle of mounting your plate any time you change cameras. Print as many as you need! This plate also works great with my phone frame. Use two M4 bolts to attach it. You will have a phone with…
For good result print with 0.1 ~ 0.15mm layer size
I needed a simple cold shoe mount for off camera lighting that had a ¼ 20 thread for attachment to tripod. Also including a base plate without the cold shoe so you can model your own accessory mounts. Models: Cold_Shoe_Screw_Mount.stl -…
Here is a quick release clamp and plate for DSLRs and other cameras. Made this because I needed a larger number of these that are compatible with other release plates. Bigger than these usually are (88x70x25mm) for stability. I printed…
