Counting matching models…
I wanted to remove the radius overhangs on the print but realised the original STEP files were exports of the STL so I've exported clean STEP files as well as made my minor tweaks. Thread was changed to GL20 thread to hopefully improve…
I really like the original cat key hook design by a-arruti , but I had trouble getting the lever to print right, and be strong enough to use. I looked through comments, and saw others were having the same trouble. I want to put several of…
Please refer to https://www.printables.com/model/581649-elegoo-neptune-44pro-cable-chain and https://www.printables.com/model/596277-elegoo-neptune-44pro-cable-chain-new-90deg-mount-z/files for the full set of files you need to print for…
Gridfinity Tweaked Licence Creative Commons with Attribution 4.0 See: https://creativecommons.org/licenses/by/4.0/ Full text in LICENSE file included. Author: Tim Watts <[email protected]> Copyright: 2023 Source code: Gitlab This aims…
Fixed solid holes on mount Please refer to https://www.printables.com/model/631300-tweaked-cable-chain-mounts-for-elegoo-neptune-4 for additonal parts. I only created to fix the missing holes on the mount.
I took the model from @PhysicsDude and made a few sizing modifications to have it be snug on my camera
Nothing ground-breaking here. I re-did the hole in the stump as a matter of personal preference, to a single cylinder. I also sliced the bottom a bit to get a flatter look. Base object from Anders644PI :…
I really enjoyed the original model by Severeon , and I wanted to print it for a friend. However, I found it a little difficult to assemble without my tools (I'm just not sure what tools this friend has available to them), and I didn't…
Remixed geometry from ttoadd's spool extender, credits to them: https://www.printables.com/model/338553-bambu-x1x1c-spool-extender Extends the spool holder out to allow for the AMS to stay plugged in while you use it. Can be used in…
Adapted from this model on GrabCAD : https://grabcad.com/library/alps-fader-knob-leever-4x1-2mm-1 Modified to allow for easier 3d printing by removing some useless void space and adding a small tolerance to allow it to actually fit to the…
Very cool original design. My son wanted it to open and close fluidly so I needed to mod a bit. I widened the handles to allow for more clearance between the knife and the frame (0.4mm per side). Added a hole to put bolts in for weight…
Minor remix to add a slot so you can see the board LEDs. Also, opened up the lid around the USB connectors since the original was too tight for my Raspberry Pi 3. V3 - added a hole to the card slot to make it easier to get the SD card out…
Love the original model and find the Strand Beest mechanism endlessly facinating! :) This upload contains a leg model that is modified to allow the print in place joints to break a little easier. I found that my clumsy hands failed to…
A recreation of the old-timey tools for technicians working on radios and TVs. Has a flat-head on one side and 0.1" hex on the other. Other variants are possible. UPDATE Sept 2026: I've uploaded a version with a longer hex end as…
This is a great model by @RoccosStuff. In some of his earlier models he used the spare metal pins for the lock bolts but chose to use 3d printed pins on this. I think the metal pins looks better and it is easier to print the rack that way…
Mod of the TradRack Binky selector to have both a gate switch and an encoder
This is basically the exact same model as Propaganda 's Deburring Gridfinity module , but tweaked to hold my generic hobby knifes which have thinner handles (8mm) vs the original model which has more of a 12mm hole. Note, this was such a…
Parametric honeycomb inserts for the Prusacaster (and the knob holder portion from the BexGears remix by MrJamin). Modify the parameters of the inserts to achieve your desired thickness and/or to suit your printer's tolerance! I also…
This design is brilliant, but I was having some issues with the fit in my particular caliper. Changes made: Switch part made thicker (to help prevent it from getting lodged between the plastic body of the caliper and the circuit board)…
Change log: - tighter fit - smaller connector tolerance - 250 mm high - hollow middle module - hollow top module
My version of a tweak stick for Awesomatix A800MMX the parts fit on a rod with 10 mm outer diameter I had some aluminum tubes with 10 mm outer and 8.2 mm inner diameter lying around simple version: use o-rings to hold the printed blocks…
I worked for TweakTown.com previously and was requested to design a 24x Thumb drive organizer for one of the reviewers. Here it is! I have a second version of this holder that has been updated and does not include the logo. You can find…
Gridfinity E3D Revo nozzle holder (4x nozzles) in a 1x2x3 stackable format. Remixed from oooohan's elegant model to improve ease of retrievability. Otherwise identical. Shout out to them for uploading the CAD model. Class.
Sleeves used: Dragon Shield Clear Matte Lowered player token tray walls so sleeved action cards would inset better Added 3 new “envelope” sleeves for the non-deck cards See @ Eerko 's make for the rest of the components. I didn't like…
I'm not big on printable hardware - there's nothing wrong with it, but I've got a tonne of hardware so I might as well use it. For the main body, you will need: 14x - M4x6 heat-set inserts 8x - M4x20 bolts 6x - M4x30 bolts (you can get…
After “upgrading” the KP3S PRO printer with Y axis with linear rails, I found that the previous screw was short and the screw delivered did not work with the spring. This print will enable the original screw to function. There is a 0,2 mm…
I liked the idea of LoboCNC tape slitting tool though not as enthused with the elastic and nut jamming. So I added a inset for a 10mmx 3 mm magnet (to replace the elastic for return) as well as a 5mm thread for a 50mm screw (no nut…
Prints without supports. I ordered the following acrylic panels for mine, the model can accept up to 4mm deep panels, but I went with 3mm as it was more readily available: Dark tinted 3mm panels from cutmy.co.uk for approx £25 delivered -…
Love the original by De jennes (5374) his insert parts fit perfectly (just added a back colour and a opening for a 4mmx2mm magnet.I used ironing which does look betr thought the inserts are quite tight but do fit.
UPDATE: Considering the comment provided below, I decided to redesign a bit to increase clearance between the extruder and the spool holder. The new version can be found here: https://www.thingiverse.com/thing:2904072 or here:…
I have not been particularly happy with the Zimaboard mounting options out there until finding @MartinRowan's excellent modular 1U system . This remix was done to suit my specific needs, but I feel that some may be of use & worth sharing.…
>>>>NOTE: I will still consider it a work in progress, since my top plate has some gaps on the side, but im not yet sure if its the modell itself or tollereance issues while printing, but i wanted to share the modell anyways since im not…
This is a quick update of the original Simple Extruder Visualizer intended for 2mm diameter magnets. Love the original clean design, but I usually keep 2x8's on hand (for fridge magnets and such). You'll need to stack a few (3+) to reach…
In the beginning, I was getting frustrated with my inability to get the little clips printed without creating a bird's nest on the build plate. As a result, I made a few minor changes to the original design of the chain links so that I…
The Kingroon Z homing screw was too long and I could not screw it in enough to have good first layer. Replace Kingroon screw with any M4 ISO 4762 Socket head screw. M4x16 should be best but beware - it was quite a challenge to get it…
I remixed the original so as to lower the camera. It now points more towards the nozzle. The bracket moves less and still has the features I liked from the original design. It will pop off easily and it required no modification to the…
This is a remix of the raspberry pi3 case, originally designed by Joe and remixed by Wilts01 to enable bottom mount. Thanks to all original creators! Changes in remix: Remove the side mount, the side wall is flat again Added 4 bottom…
I've noticed a few tweaks that can make the jig more printable by removing weird overhangs and less thin walls that don't seem to affect the functionality but greatly increased the printability for me. Some of these could be because of my…
I encourage you to download this model and try to get it working. If you do upload it as a remix and give me credit. Thank you!
My ESR MagSafe charger didn't snap in to the hole so this one is tweaked slighted to allow it to be inserted snugly.
I took the original one and tweaked around the measurments in tinkercad and now it more snuggly fits because for me the original model was a little too loose. Also print in place with support and adhesion 15% infill worked fine for me
I made two changes to darkcoffee's ball nut with M5 nut insert for Sneaks' articulating camera mount system : Lengthened the screw hole, so longer screws will fit Adjusted the nut hole pocket to print without supports I made these changes…
gridfinity 2x1 that fits large faced mitu and cheap Chinese DTIs/dial test indicators
My personal Remix of the foostan's Corne V.4.1 case. A minimal yet quite effective case
This is a case that was designed to fit around the pcb that benvallack designed based on the ferris sweep. I wanted something that would protect any tabletop from the pins that stick through the bottom after the components are soldered…
This is a slightly tweaked version of Open Hardware Design's awesome IoT button . The design is great. Their instructions are awesome. So I am going to keep this brief. The original version was not very flexible in the size of PCBs it…
Tweaked version of the rail with a 1.5% scale up for a tighter fit and with small registration pegs on the bottom to help align and glue the rail to the side of the Apollo on the flat spot with the holes. Not a snap fit but the dimensions…
I designed this Trim Potentiometer adjustment tool for adjusting a variety of different trimpot models, and it should fit most trimpot barrels. This is the second version. There was nothing wrong with the first version , which is much…
-added a mesh to holder -made an extra mesh for the other side or if you already printed the holder (just cut some mesh out to push your usb plug) -holes and nut traps now M6 because it is lighter and look more the right size .. if you…
Wanted to add slight improvements to an already awesome blaster. I have printed the original but had a few issues. Thankfully Chance offered the STEP files so I could easily help out and add these minor improvements. Let me know what you…
I tweaked my case after printing and added 8mm tall spacers (chopped up 7mm hot glue stick i had laying around that I found fit perfect.) to most of the bit slots to allow me to store my LTT bits in them at an appropriate height and also…
I designed this Trim Potentiometer adjustment tool for adjusting a variety of different trimpot models, and it should fit most trimpot barrels. While there is nothing wrong with this model, there is a second version here that is a little…
I found 3 places from where vibration/noise comes from. -one is the Y axis stepper, which is very close to the bottom plate, and at certain frequencies it starts to make noise. The other two places are at the display. -there is a small…
I just wanted to make a small change to the original one. round the edges a bit square of the front use an insert in the front angled plate with the sizes (you can print in a different colour for easier visualization Three types of text…
Minor tweak of a great Thing! Now printed and installed - constantin33 this Thing rocks!!!! Thanks again Print Settings Rafts: No Supports: No Category: 3D Printer Parts
Just picked up Tiny Epic Western game, and glad to see tev's solution for storage. The bottom insert was too tight for my character cards, so I decided to make a little room. I also wanted to make it easier to pull out of the box, so…
Remixed geometry from nansjes1, whom remixed the model from ttoadd's spool extender. I made a remix because this model would not work with the M3 x 30mm screws, so I removed 1.5mm in length from the model. (On the X1C it worked, but on…
This is a monolithic Priming handle for the Wildstyle. I've started designing it before knowing of the existence of the Shovel handle by Sillybutts, but since it keeps the smoothness of the priming rod unchanged and it's slightly smaller…
Use 100% infill for best results. Use your normal 12th scale front end bearings. Make two.
Changed screw head holes to 6-6.5mm dia converted all new threaded holes to accept threaded inserts Increased clearance for flywheels Pusher mount has been tested and improves switch reliability greatly. Category: Toys & Games
This is a tweaked version of the excellent MK3 Nozzle RHD Rev. C by RH_Dreambox optimized for FDM slicing with PrusaSlicer/Slic3r. If you're using another slicer, and/or are able to print the shroud with another high-resolution technique…
Replaces the HUDY tweak wheels
Did you buy Möbelix GAP sunshade and realized, that it cannot be rotated over it's axle? Don't worry and print this tweak. Print with PETG or ABS/ASA (ASA=UV proof). Two STL available: 45 degrees and 36 degrees (on photo). Koupili jste si…
while slicing, printing and assamling some problems occurs, so i made some changes ... created some better flex foots .. Polisher-2.v3-foot_Flex_x4.stl closing holes in the model .. Polisher-4.v3-casing_b.stl gear is wobbeling, so i made…
Hey guys, this is my Cookie Cutter of the tweaker. I also have a cutter for the krieger. ;-) visit: racequadgear.de Category: Kitchen & Dining
My First Upload here :) Please comment ;) Print Settings Printer: Tinyboy/Filabase Rafts: No Supports: No Resolution: 0.2mm Infill: 40% Category: R/C Vehicles
Liked ttothermans updated panels, but didn't want the dart holder, so mirrored the port on right side panel, and made a smaller end cap for bigger pcars/bcars on a short barrel EDIT 19/06/26 - Added ttothermans On Fleek handguard,…
Antenna holder I came up with to allow direct mounting of VTX in cutout on the tweaker. This is for the latest top plate for the Tweaker. I have a non extended version for the old original I'll upload later. Print instructions Category:…
It is basically the same part, the only tweak I did was making a slightly bigger gap to fit the side part of my frame.
Parts: Bearings : XRAY-930407 Screw : XRAY-902305
Used KptnAutismus extended thumb piece onto an extended Freerunnner mag release, plus made mag release 1cm longer, added gonking pcar onto the orange tip EDIT 19/06/26 - added a picatinny upper, with added sling point, and added mantis…
This is a slightly modificated version Open Hardware Design's IoT button . The base of the model (the vertical walls) are raised by 10mm (or 0.4") get more clearance for cable lugs. Check the project built around this on…
Incorporate roller pusher tweaks into Taffy magwell of Nailer Added cosmetic detail from roller magwell onto top of Taffy magwell Made Nailer trigger versions of the blade and 1911 triggers
A thin case for the tweeked Ferris Sweep keyboard that Ben Vallack created. The case has two M4 holes to enable tenting of the keyboard. Kudos to Ben for the PCB design, you can find it here:…
This minor contribution might help anyone suffering sag from the side plate screw head counterbores. Thank you so much to @firstgizmo
this is for easy use of tweaker wires.
increased the diameter of the counterbore to 8mm so that standard button head socket cap screws will recess
This is a few small adjustments to the excellent sculpt by Peter Farell, to help with printability and removing supports
This is a minor tweak of the LED clip which works nice. I turned up the tips of the baffles, which seems minor but as you can see from the cover photo the tips are now dark when viewed from the front. To digress, the genius of…
Don't download this - download the original at https://www.printables.com/model/502515-bear-upgrade-for-prusa-i3-mk4-mk35-mk39/comments This is here for communicating with the original creator about tweaks to his design.
Hey guys, this is my Cookie Cutter of the tweaker. I also have a cutter for the krieger. ;-) visit: racequadgear.de Category: Kitchen & Dining
I tweaked the "interface" diameters as they did not connect very well.
Just adapted it to my needs. Thanks to the creator of the original model.
I really loved these organizers for the Harry Potter Hogwarts Battle Game and Expansions. I made a few tweaks
Needed a desk holder/stand for my HoldPeak HP-990 tweezer multimeter when using plugged external wires and came across this lovely model. Maybe someone out there who has the same multimeter will find it useful as well as the other new…
First up, thanks to Domochevsky for releasing this blaster AND the step files! Secondly, the parts here use M3 heat set inserts (5mm OD, 3-3.5mm height). Don't use any smaller ones, they will fall out or not be strong enough. On to the…
1/28 Mini-Z size tweak station for micro RC cars, set up for 98mm wheelbase. The idea is given by a friend of mine and I just did it with Rhinos. Absolutely under development, all ideas and suggestions are welcome. Parts to complete it:…
Just a tiny tweak to Tapestry Minis -_Tech_Cards_Stadium_Monolith_Final.stl My treasury with base just wouldn't quite fit. Changes highlighted in yellow. js5002 has updated the original design. This remix is no longer needed. Category:…
i love the commander box, its a fun print to put together, but i saw a user experience issue (yep, i can be a bit slow sometimes :D ) and also wanted to try a different aesthetic for the top. all the rest of the files from the "Hex Lock…
Customized version of http://www.thingiverse.com/thing:46335 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=46335 Instructions Using the following options: Pencil_gap = 3 Sign_HEIGHT = 6 Sign_TYPE = 1…
Customized version of http://www.thingiverse.com/thing:52734 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=52734 Instructions Using the following options: message = TweakTown font_thickness = 5…
My daughter wanted a star to put on top of her small Christmas tree. I went to print the original I found on here in Cura but it came up solid rather than hollow. I flattened out the bottom, rotated it up to be standing up, and hollowed…
Overall good design, fits into existing space well, rolls well. Instructions were good. Had to make some small changes. The 3mf files allowed easy modifications. Felt not needed. Extra outer lip added to cap, block prusament spools, extra…
Mod to fit slightly larger solder cleaner holders and to reduce the overall height back to 3U to reduce print time and filament use. The original was nearly 5U. About a 13mm reduction in unit height. The hole is just over 3% bigger (X&Y),…
Some small tweaks that make a great model awesome. Arms My phone kept falling out so I added bigger grabs. Sled My phone kept sliding off the front so I added hooks at the bottom. Clips I don't get why there was that fiddly extra part…
increased the diameter of the counterbore to 8mm so that standard button head socket cap screws will recess
This is a few small adjustments to the excellent sculpt by Peter Farell, to help with printability and removing supports
