5,735 models
July 27 2022 house keeping note: Somehow, reviews and makes for the older version of this fan duct have been showing up on this page, and reviews and makes for this updated version were showing up on the old versions page as well. To…
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
(for Bambu, check below) Please like, share, download and all the amazing good stuff! Since this is my final model in my "Single Extruder - Dual Color" series where I managed to put 3 colors together into one model! Not counting the…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
I always like to see what is going on with my printers. Sometimes I wonder what movement the extruder motor is making (extruding, retracting, slow, fast, etc.), which is not always so visible on the Prusa MK2 / MK2.5 / MK3. Hence I have…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Size: 61mm x 47mm x 42mm Filaments: PLA Prusa Orange (orange) and PLA Vanila White (white) Note: All parts need to be glued.
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
Update (July 13th, 2022) After receiving feedback about mounting the shield and the occasional break, I have decided to strengthen a few parts of the design to prevent breaking during support removal, slipping off the left mounting point,…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Also see our Latest Project Launching on Kickstarter 30th April 2023 https://www.kickstarter.com/projects/fizzychickens/3d-printable-antikythera-mechanism Remix of Three Ducks in a Bear Suit Pen Plotter Requires 2 x M3 Bolts (To hold Pen…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models:…
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Because changing nozzles with the supplied multi-tool was too wobbly for me, I developed a simple tool to hold the hotend more stable. As can be seen in the CAD image in cross-section, the tool is designed in such a way that the hotend…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
What colors will you choose? Ever since I designed the dual color cow I really wanted to make a poison dart / tree frog version, but none of the available 3D models were suited for this operation. In the end I decided to try and model my…
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for one variant
Update : there is now a version that can be mounted on the X carriage of the Prusa Mini :) Hi !! I'm a jeweler and use my beloved prusa MK3s to design invented custom tools for my craft. The visualizer challenge, encouraged me to create…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
I suppose that this stl may be useful to other n4 users also. This is ment to be a temporary fix. Mine extruder lever broke apart just after only a few filament changes. If your extruder starts to make clicking noises during the print, it…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
This is a little extruder indicator in the shape of a modern wind turbine. I was inspired by the Dutch-style windmill extruder indicators in Prusa's video here: To attach to your motor, you will need either two 8 x 3 mm disk magnets or a…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
This was designed to be used with a cylindrical magnet (8mm diameter by 10mm long) This is a press fit, no glue is required... Print instructions 200 microns works fine !
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
MK3 Stealthburner V0.5 This is my Stealthburner case mod for the original mk3s+ extruder. Note that this is only a design upgrade and the upper ‘fan’ is actually a extruder visualizer (I may also do a version with an active fan in the…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Simple holder for the extruder cable. Fits for Prusa i3 Mk3/S/S+.
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
Fan duct for the Nextruder hotend fan. I was having issues printing PA6-CF and uneven cooling causing warp on one side of the models being printed. No matter the print orientation, the right side of the model would show signs of uneven…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
Ho Ho Ho! 🎄 Imagine a Christmas tree made of not just two but three parts , each twisting into the other to create a double vortex illusion – yes, it’s twice the magic! The twisting motion makes this tree look absolutely mesmerizing and…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Inspired by the Nextruder gearbox, I created this visualizer. The extruder indicator looks very similar to a cycloid gearbox, although it is actually only a half one. Google it, it's an interesting concept! The middle part rotates…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
Introduction This accessory will be used in one of my projects currently being developed for the PRUSA Mk4. What is this for? This serves to limit the tightening force on the nozzle when it's being changed. However, please so use it with…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
Print approx. €4.77–€5.83 excl. taxPreliminary estimate for PETGSource material: PET
Ho Ho Ho! 🎄 Imagine a Christmas tree made of two parts that twist into each other – yep, you twist it into place. This creates an impressive vortex illusion , making the tree look almost magical. Caution: The illusion is so captivating,…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
There are many extruder movement indicators, and I was looking for something simple, so here is my own take. This is a collection of a number of indicators, printed in two colors (black and orange Prusament PETG in my case, to complement…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Size: 82mm x 52mm x 41mm Filaments: PLA Blend Viva La Bronze (gold), PLA Vanila White (white) and Silk PLA+ Rainbow 02 (shiny) Note: All parts need to be glued.
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Yet another design of extruder indicator for Prusa printers. Pro tip: if the part stops rotating with the extruder glue a small piece of paper on the magnet (e.g. use a paper circle from puncher and a glue stick) to ensure friction…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
I was having a lot of trouble printing with flexible materials like Ninja Flex on my XL so I decided to modify the existing parts to try and eliminate the filament jams. Initially i started with reducing the friction from the filament…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for PETGSource material: PET
As stated by the original project here : Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
I decided my Prusa MK3s needed a really cool extruder visualizer - and decided to design an animated Rick and Morty Portal. Animated Gif of the visualizer in action . Please see the Prusa Blog for details on building the inner, spinning,…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
Changing colors between layers is a known and easy to use feature in Prusaslicer. If you want to change filament within one layer you usually need the MMU. But with virtual extruders and some prearrangements in the model and slicer, this…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
I noticed that the wrench with chamfers is very close to fitting IBnobodys heatblock clamp so i remoxed the STL to make
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
As soon as I saw the Nextruder and the gears on the MK4 I thought it would be nice to see those during printing. So here it is! A Nextruder gear window! If you like the idea of a window, but want to use the original washer check out my…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Remix of MayrM's knob but scaled down to dia 33 mm. The original seemed too clumsy. The part attaching to a stepper's shaft is scaled to 101%. Fits to stock extruder on Anycubic Kobra Go, should be compatible with Ender 3 and other…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
This print is only 40 minutes, uses only about 1.5g of each filament. The layout matches the purge matrix so you can easily enter your values after eyeballing the clean point. You will get cleaner prints and probably save a lot of…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
Simple Archimedes spiral extruder visualizer. Color change at 1mm level. Glue/use 3x 8x2mm magnets (or 2x 8x3mm magnets) on the back in the recessed circle. Print in PETG/ABS if you have an enclosure, otherwise it will likely warp from…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Introduction This accessory will be used in one of my projects currently being developed for the PRUSA Mk4. Although I'm aware that there are several solutions for this purpose, I have chosen another option that will fit into the…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Size: 82mm x 52mm x 41mm Filaments: PLA Mystic Brown (brown) and PLA Vanila White (white) Note: All parts need to be glued.
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
This lightweight rotor-style visualizer mounts onto the shaft of the Ender 3 V3 SE's silver extruder stepper motor. Designed for effortless visual monitoring, it rotates as the extruder motor turns, clearly indicating direction and speed…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
A simple to print dual color On Air warning sign. Just swap the filament color and have a dual color print. The combination of colours is yours to choose. The base is printed in a single colour, black, has 4 holes on the back for easy…
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for one variant
Until today, I missed the right extruder motor movement visualizer ;) Do dnes my chyběl ten správný ukazatel otáčení motoru extruderu ;) Print instructions No support, simple print... In this case PLA. Bez podpor, jednoduchý tisk. V mém…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
These holders hang from the XL's side extrusions to store your extra Nextruder nozzles. When the nozzle is in an extruder, the holder becomes a label that clips on to the extruder to remind you which nozzle is currently in use. The .3mf…
Print approx. €3.74–€4.58 excl. taxPreliminary estimate for PETGSource material: PET
After having a bunch of problems tunning the stringing problems on my GeeeTech A30T, I found out that seems to be a common problem with the printer in question. After seeing a bunch of solutions relying on lowering the extruders from the…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Needed a box for my quick change Nextruder Hotend Assemblies. Holds 3 completed assemblies, and 16 assorted print heads. I enlarged the box, but also shortened its height. Be careful the first time you try to close the case or you might…
Print approx. €6.91–€8.45 excl. taxPreliminary estimate for one variant
Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…
Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET
Love the original model but was impossible to print it with a single extruder so i made this remix. Its not perfect and need a little bit more of work (i will try to make it better when i have time) but it work. 0.2 layer height One…
Print approx. €0.23–€0.29 excl. taxPreliminary estimate for one variant
This Extruder Visualizer, unlike most of the others you will find, will help you center your magnet thanks to the centering lip that will also collect the extra glue. This Extruder Visualizer is also designed to ensure a good clearance…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Remix of GLeZz's Red Valve Extruder Visualizer to fit bowden extruders on Anycubic Kobra Go / Ender 3. Downscaled. Print with supports, split the valve into two parts to save material, print the nut separately. Fits to stock extruder on…
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
I had a heck of a time trying to find an extruder indicator that will work with my new V3 SE. The few that were out there did not give me what I wanted. So, I took the good work of Toni H and updated it to work with the new extruders that…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
EXTRUDER COVER FOR KINGROON KLP1 210 My print is printed from Graphene PET Printed on 3 perimeters, filling 40% with a wall height of 0.15mm. Supports are not needed I recommend printing from ABS, ASA, PET material. Enjoy
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET
This Extruder Visualizer, unlike most of the others you will find, will help you center your magnet thanks to the centering lip that will also collect the extra glue. This Extruder Visualizer is also designed to ensure a good clearance…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
This is cover for Original Prusa MK3S+, to mimic the design of the Extruder cover for the Original Prusa MK4 and XL.
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
This Extruder Visualizer is based on the “Josef Slurping Spaghetti” graphic found on empty Prusament spools. The two-tone Josef component slides onto the extruder motor. The spool is made in two segments so no supports are necessary and…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Nextruder Nozzle Holder with box, up to 7 Nozzles MK4_Nextruder_Nozzle_Holder_v2.obj: The column in the middle is ~10mm higher
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
Since the Prusa xl requiered special Temp treatment, i designed a 2 Color Temp Tower with 1 Degree Temperature steps. This temp Tower is specifically made for the PRUSA XL . This part will fail on a “bedslinger” The Base is 2mm Tall. Then…
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for one variant
I needed a safer storage for my spare nozzles so i made this to replace the plastic bag the spare nozzle came in. This is for a single nozzle which i prefer over boxes with multiple nozzles in my sparepart kit. Easy print, text can also…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Most extruder rotation visualizers rely on superglue to hold the magnet on. This is not very reliable, as the magnet tends to fall off. So I designed better model, where the 8 mm magnet is held in a sleeve.
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
This print elegantly relocates the Ender 3 extruder from behind the x-axis gantry to the front. This makes the extruder easier to access as well as keeping the bowden tube fully in front of the z frame. This way, the bowden tube doesn't…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
Made for Prusa MK4 and Prusa XL but fits with every E3D nozzle. You can use it with the Prusa Nozzle Replacement Tools. No supports needed.
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Just a collection of simple extruder position indicators. It's not derived from other models, but it's definitely been inspired by them. This uses a little 6mm x 2mm neodymium disc magnet. Friction fit seems to be sufficient.
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
In den Zeiger sind zwei Neodym Stabmagnet Ø3mm x 10mm eingepresst. Diese stehen vor und liegen an der Welle des Motors an. Gedruckt mit Supports für den kleinen Zapfen.
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
I build this gantry to check the righ Extruder Rotation in your printer
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for PETGSource material: PET
When looking for a sleek, simple, logically way of storing Nextruder nozzles many of the printables are so close to fit my desire for what i'm looking for. That was: no chance of flying nozzles when bumping into them when they are hanging…
Print approx. €2.00–€2.45 excl. taxPreliminary estimate for PETGSource material: PET
Modified the Bear Upgrade 2.1 Extruder (BearExxa) Cover (fs-cover) to fit the original M5 fitting used by Prusa for the MMU2 cover. I bought the fittings here: http://lecktor.com/en/nuts/159-tappex-microbarb-m5-pack-of-10.html Print…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Solve the noise generated by the bondtech gears during filament change process on the MK3S/MMU2S.…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
Description: I needed a storage solution for 1 extra Nextruder hotend and something to store spare/different Nextruder Nozzles. So I remixed the model of Relive93 to store 1 Hotend and 4 Nextruder Nozzles on a Skadis pegboard. Print…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Dust Cover for Stepper Motor / Extruder (My) Print settings: Material: PETG Nozzle: 0.4mm Layer: 0.2mm Infill: 15% Support: No This set is for the Prusa Mini. I think the caps can be used for other models too.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
A small motor visualizar. Attach a small magnet to the print and attached it to my i3 MK3+. Remix of: https://www.thingiverse.com/thing:2881084/files
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
Created this simple extruder visualizer for 8x8 mm magnets, since I had these magnets laying around. Magnet simply is pushed into the central recess. Inner diameter in CAD is 8.1 mm, which is a good friction fit on my settings. If yours…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Direct Drive Extruder Assembly for V6 Hotend and CR10S PRO Dual-Drive Extruder for Creality machines Needed: 2x Short screws M3 1x Long M3 screw 1x Slightly Longer M3 screw 1x M3 short screw/glue - attaching angled fan holder piece Parts…
Print approx. €4.58–€5.60 excl. taxPreliminary estimate for one variant
Easy to print with filament changes at each top surface. The top layer of the main letter is 0.8mm before the text outline. Main text is changed after the top of the base layer. .gcode with pauses is attached. I added ½" black magnet tape…
Print approx. €2.62–€3.21 excl. taxPreliminary estimate for one variant
I printed with PETG and organic Support.
Print approx. €2.38–€2.91 excl. taxPreliminary estimate for one variant
I remixed one of the extruder visualizers by Prusa to add a slot for a 5x5mm magnet, to be inserted while printing so you won't be needing glue. Pause your print at the correct layer in PrusaSlicer! The provided gcode file already has a…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Silver Surfer logo - add pause at each top layer for filament change. .gcode file attached has pauses in the slice. I added ½" magnet tape for a nice fridge magnet. Excelsior!
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant
2 Different Filament Black & Orange Magnetic 5.00mm X 4.00mm
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
Any Metroid fans around? Here is my take on Samus' emblem that you can use as an extruder indicator. Print in PETG or PLA with 100% infill and glue 2x 8x3mm magnets to the back of the print. For multiple colors use print stops where…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Easy to print with 4 filament changes. Add pause after top layer of base, then 0.8mm from top of the letters and 0.8mm from top surface for the black outline. Attached .gcode has pauses in the slice. Excelsior.
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant
Links for Titan Extruder Kit :…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for PETGSource material: PET
I've been having problems with blockages for a few days, so I thought it was a good idea to have an extrusion indicator and I thought it would be fun to make a tiny sword. I used supports, a layer height of 0.2 and an XY hole compensation…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
all hardware needed to mount is included in the klemco v6 mount kit a very small PTFE tube spacer is needed, less than 10mm is needed, i dont know the exact length.
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Extruder Visualizer for Neodymium magnet filament Fliament Black & Orange
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
Easy to print multicolor, filament change at each top layer. Attached gcode file has pauses included in the slice. I added ½" magnet tape for a nice fridge magnet.
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant
This is a remix of @Extrutim's excellent extruder indicator/visualizer that stays centered and uses press-fit magnets.
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Bring a little bit of Anime flair to your Prusa Printer with the BlueLock logo as extruder indicator / visualizer. Print in PETG with 100% infill and glue 2x 8x3mm magnets to the back of the print. Enjoy.
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
Pokestop Extruder Visualizer Hey maker! 👋 Add a fun and practical touch to your printer with this Pokestop-style extruder visualizer. Features: Easy to mount using two 8mm x 3mm magnets (4mm also works). Stays securely in place while…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
I have modified the design of this 3d printer head robot flange on the original design that I designed earlier https://www.printables.com/model/154117-extruder-arm-robot-flange to fit a scara robot arm designed by #HOW_TO_MECHATRONIC. You…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
If you find your nozzle storage becoming cluttered or stored in individual baggies, a dedicated organizer can help keep things tidy. While searching on Printables for a suitable solution, I found several designs that provided inspiration,…
Print approx. €5.01–€6.13 excl. taxPreliminary estimate for one variant
Print flat against bed, optionally with support on build plate
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Pedro Racoon Extruder Prusa MK3s Iman de 6x2mm
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Slightly improved, better holding clip on the extruder motor. I added small tabs for more grip on the extruder motor. In my case, the original clip was not stable and during the crazy movement of the extruder, it was sliding off the…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
This Poop Emoji door hanger is designed to help kids during potty training. One side shows the classic poop emoji 💩, while the other side features the same icon inside a red prohibition circle 🚫 – making it easy for little ones to signal…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
Background to the design First of all, I guess, the basic idea came orginally from Yosuke's model , that I saw while browsing Printables for useful stuff. So some credit to him . However, I am convinced my interpretation is far enough…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
This happy little Smiley is having a lot of fun during your prints. The eyes can rotate independently if the Smiley gets dizzy. Model Designed with OpenSCAD. Print Face down / No support needed / Change the filament color after some…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
This box gives storage for seven fully assembled Nextruders (incl. nozzle,,heat pill", thermistor, heatblock, silicone sock). I liked the idea of @dteng and modified it to my needs. I extended it to fit onto the top edge of the O riginal…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
This is a CORE One L mod for cat lovers: the Nextruder level gets a cat paw that is trying to catch the bird on the grille handle every time the printer opens or closes the chamber ventilation. Printing There are two versions (of the…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
The base has an inner hole diameter of 5mm for the 5Dia x 3mm high ND35 magnet. It is easier to use 2 of these to enable better centering of the text disc onto the base (one pressed into each end, with each protruding about 1 - 1.5mm).…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Extruder indicator to make your prints faster ;) Simply press on the extruder motor and bada bing bada boom you got a neat lil wheel! I printed with a .2mm nozzle for the extra details but on a .4 I was getting respectable prints.…
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for one variant
Do not print with Beskar fiber filament. It is far too heavy for the Nextruder to handle. Instead use something very light yet somewhat flexible. This print is with some cheap 8% Carbon filled PLA I got Amazon for about $30/kg and it fits…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for one variant
Nextruder nozzle holder for 3 nozzles instead of 6. - I will never have that many:-)
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
Two-color extruder visualizer with long shaft. You will need 2 neodymium magnets 8x3mm. PLEASE SEE MY OTHER PROJECTS! :) https://www.printables.com/pl/social/236468-nieuniknione/models & Collection: EROTICA :)…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
