Liczymy pasujące modele…
As a biker, I make use of the Cardo Pack Talk Edge communication defice to talk with my friends. When not mounted on my helmet, I store the Cardo device in this case to protect it mechanically by adding an extra shell. It is equipped with…
The Design As I think the remote control for the Google TV Streamer is fragile, I designed this protection sleeve that fits tightly on the remote housing. Leaving the IR eye free, and the mic input too. Initial version: 1.01 Material…
The Design A character out of ROBLOX materialized by 3D printing. Its multi material, so make sure to (smart) paint the volumes as you like. Material I used PLA, but use whatever you like. Print settings I applied the following settings…
My print settings: material → PETG layer 0.2mm 4 perimeters infill 25% Holds 1kg filament spools, where I use spools with with a weight of: Polymaker (1kg) Real3D (1kg) 123-3D.nl (1.1kg) Prusa (1kg)
The Design There are many AIRTAG cases out there, but I made my own version as it fun to do. The version I made are basiclly the same with respect to the casing, how ever they come with different logo’s: no logo Apple logo Pear logo KTM…
The Design Designed for the need of hanging stuff inside my tenttrailer to organize stuff. I created these eyelets to fit on tent poles of 22mm and 25mm diameter poles. Each comes as an open and a closed version. Testing I tested the…
Dear makers, I created this FIDGET TOY for my son. It clicks, thats it! In case you look for a “click” this might be what you need, haha. I printed the parts with PETG. Its nice to make the casing transparent, so you see the parts moving.…
The Quick Mill Portafilter Tamper station I created this design to fit my Quick Mill (2835) portafilter . I'm using a single coffee outlet on the bottom of the portrafilter which makes it stable when I tamper the coffee. Besides that, its…
Moto BeeLine II - Casing + Inlay For the BeeLine II (moto navigation) I created this Rugged Box with TPU inlay. For the box design I used the model of @Whity (so all the credits to this maker for that aspect!). For the inlay I created a…
The Design Inspired by a mall functioning fidget (printed by an unknown stranger and smugled inside the house by my son) I designed this fidget toy. Printed in one go, and no supports needed. For a few links, I added some internal…
The Design I printed all kind of clips, used all kind of designs, but still not happy. This design helps me to close plastic bags in my kitchen easy and fast. It works with several thicknesses of plastic bags as te clip will settle and…
Spinning top Inspired by designs of other makers, i created my own spinning top design, with an easy to print spinning body and handle, where the handle assembles simple (based on the settings below). The body has a spirol on its face,…
I recently bought the Nitecore EMR10. It comes with 10 packages of repellent mats. As I wanted a fancy form fit box for it, I created this handy box. Check out the pictures and the model, you might like it
Dear makers, I made this wasp collector to fit a standard Bonne Maman jar (see picture). So first eat the jam out of the jar, next you use the (cleaned) glass jar to be part of the wasp collector. The jar with the ~8cm opening fits the…
The Design I created these GRAVITRAX parts additional to the set my son has. I created spacers of different heigths, and one additional with a side hole that enables a ball to exit from the side. The spacers have triangular cavities, to…
Dear makers, I designed this wall plate to raise my ANNA thermostat a bit from the wall. For estetic reasons, but it also gives cable exiting the wall a bit of extra routing space. Material (I used): Black PLA Have fun!…
What this is A storage box to fit the knäckebröd pieces including the wrap. I like to keep the wrap around it in tis storage box. Why I made it As i was storing the knäckebröd always in plastic bag, until recently where it came to my mind…
The Design Storing the yoghurt (crème fraiche) inside inside the fridge requires a lid to keep it fresh. More and more those containers are not provided with the standard lid that was supplied with it previously (in the Netherlands at…
The Non-Loosable Cable Tie (with Velcro) I’ve been on a bit of a mission lately—trying to find the perfect reusable cable tie for those frequently used cables that need tidy storage between uses. After experimenting with a few ideas, I…
The Design Just another fidget toy, named Momo, which is named after our new house mate. Material I used PLA Print settings I applied the following settings: Layer height: 0.20 Infill : 15% Model orientation: <see main picture>…
We own this Zwilling Blender (type 53003) which we use daily to make shakes. The machine on its own works very well and we like it. However, the lid that comes with the lock, is fragile. The hinges of the locking part tend to break after…
What this is Hook, wall mounted, with a cover plate to hide the screws Why I made it I needed a hook to some walls to store some bags to the wall in my office and other spaces. Printing recommendations Print in PLA, PETG or another rigid…
To wszystkie aktualnie dostępne wyniki.
![Beeline Moto II [BLACK] - Casing + Inlay](https://media.printables.com/media/prints/f9177b1b-4ec9-47f9-b156-eb26eb1c75bb/images/11731374_9dc9fdd0-2aa5-4f53-b760-d384626585e9_644259ed-2c8b-42ec-a31b-00a0d0e15c65/motobeelineii_inlay.jpg)
![ANNA [Plugwise thermostat] wall plate | mounting plate](https://media.printables.com/media/prints/7ccce409-52ec-4720-9c35-2ca3b776efa9/images/10935621_95a77f70-1d87-4622-81cb-53db6ca2950d_ae3dea0c-e6ef-47c3-9824-abab44750881/anna-plugwise-thermostat-wall-plate-_-mounting-plate.jpg)
