Liczymy pasujące modele…
Spool cap for Worx string trimmers. Should be compatible with various Worx string trimmer models (WG150, WG151, WG152, WG153, WG154, WG155, WG156, WG157, WG160, WG163, WG165, WG175, WG180, etc.) Suggested to print in ABS or ASA Fusion 360…
A slide top pill box for a week's supply of AM/PM meds. A simple print, no supports required. If desired, add a filament change just prior to the date/time legend to permit printing with a different color. If printed in 0.2mm layers, that…
I wanted an alternative to the OEM Starlink Mini mounting option. The model easily snaps firmly in place, and is just as easily removed with with some upward pressure on the raised bale at the rear. I used a 40mm x 60mm pattern of M4…
I made this to help avoid grabbing a handfull of peanut M&M's. The design was intended to be screwed onto a new container without having to transfer candy to a dedicated container. The initial version used a simple round hole at the…
Print upright, no supports required. Use multiple walls for fuel transfer integrity & strength. Best chemical resistance is probably with PETG. I printed the original with 95A TPU. Use at your own risk. Do not leave nozzle in adapter…
8/1/2023 - added “s-atu” versions. They are compatible with the original components, the body is shorter (150mm) and the front & rear pieces have embossed legends, “ANT & TX” on the rear by the RF connectors and “T, A, B” (Tune, Auto,…
01/29/2023 - added 4 connector version - added pics showing flexible wire use and battery connector (nickel plated steel) buss bars. The model has two parts, the block & the cover. The block has slots for ¼" female quick disconnects (used…
EDIT 1/24/2026 I added an additional model component, "stakehead". It is a screw-on extension to the "screwpeg" component. Stakehead is intended for ground penetration on soft ground, adding additional stability without the potential for…
A fid intended for splicing 3/16 - 1/4" (4.7 - 6.3mm) synthetic winch cable. Buttress supports are included for a vertical print orientation. No additional supports are needed. Overall length is about 140mm. The fid is hollow for…
A large loading coil for a portable vertical antenna with a 123 uH potential inductance. The coil is about a foot long and 3 inches in diameter (305mm x 75mm). A clamp-on tripod is included. The model is designed for use with 16 awg solid…
These are two part desiccant boxes with perforations on all six sides. There are 4"x4"x1" and 3"x3"x1" versions. When fitted together, the perforations on the four sides align for optimal air flow. Small tabs lock the pieces together, but…
This is a simple case for the XH-M609 battery protection, low voltage cutoff, board. Fusion 360 source and STEP files are provided as well as .STL files. The board I'm referencing is one like this:…
This model is a desiccant cartridge for the Qidi dry box. The box comes with a single packet of desiccant. This cartridge can be used in the dry box while the original packet is getting rejuvenated in a dryer. The cartridge is shaped to…
This model is a simple, adjustable, loading coil base for a portable antenna. Includes components for an attached tripod base. Per a loading coil calculator, the coil has potential for about 26 uH inductance. As designed it has provision…
Handles for an Xiegu G90 radio with the option to add a 120mm fan, power distribution box & 5A USB charger. You can use just the handles by themselves, if desired, as a desk stand. Caveats Please note that these .STL files worked for me,…
General description I wanted to try making a screwdriver antenna for portable stationary use. I have no prior experience with screwdriver antennae other than what I have read. This represents a first try, not a polished product. I have…
7/27/2023 update Tweaked spacing for layout Added new version using pins for PowerPole pair retension rather than the “click-in” method. Can make assembly easier. 7/29/2023 update Added a “shell pusher” to assist in assembly of the…
This design contains components for construction of a modular, low profile, Anderson PowerPole distribution box. Single and double sided versions are included. Individual circuits can be fused or not fused, as desired. Arrangement of…
This is a double fan, contra-rotating, wind spinner with oval shaped sails. The mount is designed for use with a piece of ½" EMT conduit tubing. 608 bearings (4 total) are used in the rotors and base mount. Two bearings are used on the…
This is an updated version of the housing I made for a Uctronics U6223 DC buck converter (like this one: https://www.amazon.com/dp/B07XXWQ49N ). The board accepts 9v - 36v DC and outputs 5v - 5.2v DC at about 5A and has a USB type A…
This model is a housing for a PD65W Fast Charging Module that has a type-C USB interface that supports PD3.1 QC3.0 SCP PPS Fast Charger 5V 9V 12V 20V and DC input voltages from 8 to 32v. The circuit module is like these:…
This model is a 46 uH loading coil base for a portable vertical antenna with tripod. The design uses a chassis mount SO239 and is threaded for 3/8-24 attachments. M3 screws are used in the tripod and legs assembly. M5 panhead screws are…
I have been doing some work on some of my john deere equipment, using waterproof connectors (AMP superseal clones) for making junctions when wiring flashers, lights, etc. One thing missing from the plug kits are caps to protect the female…
This is a remix of https://www.thingiverse.com/thing:2742838 PLEASE NOTE: I do not present this as a full function replacement for the OEM factory battery pack. Any use is at your own risk. This design was simply a method to house two…
Alternative, non-mobile, mounting for radios like the RT95 and AT778UV. Handles make for easier handling of non permanently mounted radios and add a measure of front panel protection. They also provide clearance for bottom mounted…
I needed some simple belt pouches for Baofeng radios. These fit radios such as the UV-B5, BF-888S, etc. The "button" file is for a button that can be CA glued to the pouch front if you want to add a loop of elastic cord onto the belt loop…
A small enclosure for a voltage regulator based on an XL4015. It has holes for ventilation. It fits boards like these: https://www.amazon.com/gp/product/B079N9BFZC
This model replaces the left side panel of the Flashforge Adventurer 5M DIY enclosure. It is printed in four sections, attached with M3 screws, so it can be printed on average sized machines. The bottom sections compose a center…
A small slotted scoop for removing failed print parts from a resin vat. Scoop is 42mm across the front. The front edge is angled to help lift material away from the FEP sheet. Slots are somewhat less than 1.5mm across.
A simple snap in mount for XL-4015 DC-DC buck converter voltage regulators like these: https://www.amazon.com/gp/product/B079N9BFZC can be glued in place
I wanted an activated charcoal air filter for the flip top LACK enclosure of my Qidi 6.08 mono resin printer. There was sufficient room in the enclosure for a fairly large filter element. I built a filter core sized around the intake of a…
A wrench for use with medical oxygen tank valves. Three different openings for tank valve engagement. A high wall count is recommended to improve longevity. Fusion 360 source & .STEP files are included
This model is a recirculating carbon air filter design sized for use with a Flashforge Adventurer 5M with DIY enclosure. It uses two 5015 blowers. No hardware or supports needed for print. Fans are retained by printed pockets with posts…
These components can be assembled, by stacking, to construct various items powered by the Dewalt 20v max batteries. Three examples in the pictures are a power tap with anderson powerpole connectors, a power tap with a pigtail, and a three…
This is a two part box enclosure for a Uctronics U2663 DC buck converter board. The board is configured for 5.2v output at up to 5 amps (current max is input voltage dependant). It has openings for terminal block input and USB output. It…
================================================== 4/5/2025 NOTICE: The previous files for this model were defective. The files currently loaded have been freshly generated after correcting the errors associated with the previous version…
An in-line fuse block, fusing both positive & negative lines, for circuits using Anderson Powerpole connectors. 0.25" female spade terminals are used for the fuse holders. This model uses standard bladed fuses, not mini. Short lengths of…
This is a large, two fan, wind spinner. The fans are contra rotating. Each fan consists of 6 sails, individual sails are 100x300mm ovals, 3mm thick. Hubs are 120mm wide, 15mm thick and each consists of two halves. The axle shaft is…
10-5-2019 Update on metal shafts with bushings. This version has been more durable than prior versions. To date, failures with this version have been strictly from the sun gear on the motor shaft. Typically the gear becomes loose on the…
A slightly smaller version of the vented funnel uploaded earlier ( https://www.printables.com/model/992046-simple-vented-funnel-20mmx150mmx150mm ). Basically identical except shorter. Overall height is 114.5mm and width at the top is…
This is a simple, portable, tripod for use with a vertical amateur radio antenna in a field setting. The leg angles are adjustable. The legs are pieces of ½" EMT (aka 0.5" conduit). (Actual OD for the material I used was ~ 18mm) Leg…
PLEASE NOTE: Keyboard switch power handling is in the ballpark of 12v AC/DC @ 10 mA. This may or may not. work with a given radio configuration. Use of a keyboard switch is AT YOUR OWN RISK in any given setting. I make no assurances of…
I built this coil to expand the coverage of an elevated vertical antenna. I used a "bridge" with a sliding contact for tuning. The bridge component is embossed with letters to aid in documenting placement of the contact for a given whip &…
A slip on cover for a Toyota Highlander key fob. Intended for printing in 85a TPU. Print upright with a brim (for stability) Print Settings Printer: ender 3 Rafts: No **Supports:** No Resolution: 200 **Infill:** 20% Triangle Filament: any…
I made this for use with a 7AH LiFePO4 battery. The nominal dimensions were 65mm wide & 150mm long ( 2.55" X 5.94" ). The dimensions for this battery are also shared by some vendors' 10AH and 12AH batteries. The provided model includes a…
Case variations for housing an MKS Mini-12864 V3 display equipped with a top load SD reader. Options for cable passage on bottom and side. A “slant mount” wedge can be used for angleing the display on a flat surface with double sided…
This is a work in progress. This is the first time I am trying this design, no long term use information exists. It may not be viable over the long term. Use at your own risk. Two versions of a wire antenna corner pulley are provided.…
This is a slide top desiccant container measuring 75mmx75mmx27.5mm. The ventilation openings are 2.5mm x 10mm. It is intended for use with silica beads. I am printing these with ASA to make them temperature resistant for heated recharging…
This model allows construction of protective handles to be attached to an AT-6666Pro radio. They extend out from the radio far enough to provide some degree of protection to the front panel knobs. The handles also have a provision for…
A windspinner with two, contrarotating, 5 sail hubs. Designed to be mounted on a piece of ½" EMT conduit tubing. 608 bearings (4) are used in the hubs and EMT support. Two bearingsare used on the EMT support to provide a steady mount that…
The STL files are example output from parametric Fusion 360 source to define a slide top box consisting of multple, user defined, spaces, each with it's own slide top lid. The example files are for a box with 4 spaces, each 25mm wide,…
This is a caddy to carry a spare spool of trimmer line on a Worx string trimmer. It should be printed from TPU to allow a spool to be pressed on & removed easily. Attach to trimmer shaft with either zip tie or velcro strap. I used 2…
UPDATE NOTE 12/18/2025: The initially uploaded model had a misplaced retention pin hole. It could be used, but was not optimally placed with regard to the retension ribs. The 12/18/2025 upload corrects that issue. Please note the pin hole…
1/12/2026 - Added a knurled cap as an alternative. Source files updated I wanted to add dust covers to a couple of projects so I drew this up. The model is threaded to screw on securely and includes a provision for tethering with a 3.2mm…
I wanted to replace a 4010 hot end fan on a Mini-Satsana fan duct with a 5015 to eliminate hot end creep when printing lower temperature materials on an Ender 3 with all metal hot end. The slant was to allow continued use of the BL-Touch…
This is a large, two fan, wind spinner. The fans are contra rotating. Each fan consists of 5 sails, individual sails are 100x300mm ovals, 3mm thick. Hubs are 120mm wide, 15mm thick and each consists of two halves. The axle shaft is…
I had a few of these bare 12v 30a power supply units around that are cheap & work well but have a virtually unprotected terminal strip for the 120v & 12v connections. I made up a cover for the terminals end of the supply that includes a…
EDIT 05/09/2026: I added a new component to take the place of the leg mount. "Leg-mount-w-screw" and "Leg-mount-screw" were created to have a way to secure the EMT within the mount without being dependant on purely friction based…
This is a 30mm hole mount for a PD65W USB-C charger module. The circuit board is like one of these: https://www.amazon.com/dp/B0DGLMWV5J The mount consists of a mount, cap, nut, flange, tab and anchor. Printing with a layer height of…
Case variations for housing an MKS Mini-12864 V3 display equipped with a side load SD reader. Options for cable passage on bottom and side. A “slant mount” wedge can be used for angleing the display on a flat surface with double sided…
This model is a set of handles for use with an Anytone AT-5555N II 10m all mode radio. They can provide some assistance in handling an unmounted radio, provide a measure of protection for the front panel & knobs, and raise the radio above…
This is a variation on my earlier Anderson Powerpole fuse block in that this version has provision for adding LEDs that light if the fuse is bad or missing when the circuit load is connected. Another difference is provision for a…
This is a mount for a 12v G4 LED replacement lamp module ( https://www.amazon.com/dp/B085XTRPGV ) that will fit on the end of a 1/4" NPT flexi-hose coolant pipe, commonly used to construct "helping hand" soldering aids. Print Settings…
These are mounts that can be used to attach a work light or lightbar to a ROP (roll over protection) made of 2"x2" square tube steel. They use M5 cap head screws (30 - 40mm) and nuts for assembly. Nuts fit into recesses in the larger…
EDIT 1/31/2026: A compact version of this model can be found at: https://www.printables.com/model/1579578-compact-emt-leg-tripod-for-starlink-mini-mount-ins EDIT 5/9/2026: The compact version was updated to include components that use a…
This model provides supports for adding ¼ wave vertical wires as outriggers on a Hustler BTV antenna. It may also work with other vertical antennae that have a 32mm shaft. My antenna is a modified Hustler 6BTV and I added wires for 12m,…
A simple vented funnel I printed to help with mower oil changes. 150mm across, 150mm tall, 20mm across at bottom. Wall is 3mm thick. Print wide end down, no supports needed. Fusion 360 source and .STEP file included.
I made this to wind slack rope on wire antenna haul up lines. The large hook shape on the side was to hang it on the ring screws used to anchor the lines. I printed in PETG to accommodate outdoor use. Size is approximately 210mm x 110mm x…
Two worklight mounts. One for attachment to the grab handle on a 3038e and one to allow replacement of the original Hella worklight on a 1025R with some other type of worklight. The 3038e mount screw pockets were designed for use with 3mm…
Many small flashlights that take 3 AAA batteries in a cylindrical battery holder can be adapted to operate off of one 14500 lion battery. This may be desirable if the battery holder breaks, is damaged by a leaking battery, or you just…
A three bay, seven day, slide lid pill organizer with days and times embossed on the lids. The overall box footprint is 202mm x 132mm. Individual storage cells are approximately 25mm x 40mm x 17mm. Slide lids are 2.5mm thick (not…
6/8/2024 - PLEASE NOTE: The center2 STL file in the original upload was an incorrect version. It was replaced today with a copy of the proper file. If the original incorrect version is printed it can be modified to work by relieving the…
I needed a mount for a AKK Micro FPV AIO Camera that would hold it securely but not be permanent. This model has two parts, a “seat” and a “clamp”. The seat holds the two board camera assembly and the clamp secures it in place without…
I reworked a model for openwire seperators, originally done in tinkercad, using Fusion 360. The seperators are intended for use with 14awg THHN wire. Wire snaps into the recesses using a set of slip lock pliers. I used a dab of waterproof…
3/10/2022 update - replaced shell v2 .stl's with v3. Changes made to improve fit up and simplify source models. A battery pack for GD-77 & GA-510 style radios using 6 NiMH batteries (or 5 alkaline + 1 dummy). No internal recharging. A…
This is a sleeve mount for an STC-3018 temperature controller for attachment to the tray stack on a round dehydrator. Use of such a controller may provide more stable temperature management while drying filament or regenerating dessicant.…
This model is a panel or bulkhead fitting for two anderson 45A powerpole pairs. It is sized to fit in a 33mm hole in an panel up to 12mm thick. A cap is provided for protection when not in use I printed the Body1 part with the shorter…
This was designed for my usual coffee mug. The adapter fits in the drinkholders in the console of a 2020 RAM Laramie Longhorn truck. The inside diameter of the adapter is about 95mm. The bottom extension is sized to replicate a typical…
A slide top case for the Surecom SW33 Uhf/Vhf SWR & power meter with accessories. Separate compartments for charger w/cable, adapters & dummyload, and the meter. The meter is this one: ( https://www.amazon.com/gp/product/B075H8FDDR ) This…
6/2/2021 update: Added version with 2 of the 1 oz. bullet sinkers for times when more weight is needed to overcome friction from fishing line passing across leaves etc. This is a shell for a 1 oz. lead sinkers to be used with a fishing…
I wanted to use these 1 7/8" split frame pulley's on my full wave loop antenna: https://www.amazon.com/gp/product/B07NTPBYG5 The problem was that the loose fit between pulley and frame made for a possiblity that antenna wire could get…
I lost one of the caps that cover the caster spindles on our Ztrak Z930M commercial mower. I had apparently injected an excessive amount of grease & that had pressurized the air under the cap. The pressure caused the cap to pop off while…
I wanted a box to keep my nanoVNA safe & organized when not in use. This is a slide top box with an inner lid to separate the volume into two areas. The bottom section is divided into three areas, a large center space for the unit &…
We use 2" schedule 40 PVC pipe for mounting birdhouses on our property. We use 5 foot sections of PVC pipe fitted over heavy duty 6 foot “T” posts driven into the ground. The 6', heavy duty, “T” post provides stability and the PVC…
EDIT 05/09/2026: Added an alternative "Leg Mount" component. "Leg Mount with Screw" has the provision for using a printed screw to help retain the EMT in the mount. Source files were updated with the models associated with the new…
These are components that can be used to assemble a powered solder fume filter using two 80mm axial fans. They consist of a dual 80mm fan plenum, a filter box and filer retainer, and a threaded mount for ¼" NPT flexible coolant pipes. The…
A slide top box to hold a T12-942 DC solder station with handle, a Dewalt 20v Max battery power tap with adapter and a screw top storage tube for T12 style solder iron tips. The Dewalt 20v Max battery power tap was made from these…
This model is a recirculating air filter using activated carbon pellets and two 5015 blowers. The screen components have honeycomb infill and were printed with only perimeter layers, no top or bottom layers. I built this for use within a…
We use 2" schedule 40 PVC pipe for mounting birdhouses on our property. We use 5 foot sections of PVC pipe fitted over heavy duty 6 foot “T” posts driven into the ground. The 6', heavy duty, “T” post provides stability and the PVC…
This model is a panel or bulkhead fitting for a single anderson 45A powerpole pair. It is sized to fit in a 30mm hole in an panel up to 12mm thick. A cap is provided for protection while not in use. This version does not have a flange for…
I built this bracket to support open wire feed line (AKA ladder line) used with my full wave loop antenna. It was designed for use with 108mm spreaders. My intended use is support for about 20' along a brick wall. My intention is to use…
This model consists of components to allow mounting of a 4x6" LED headlight lamp on a 2" galvanized pipe used as a flagpole. Fusion 360 source & STEP files are included. UV & heat resistant material, like ASA is recommended as is…
I made this model to sit on top of a fiberglass telescoping pole tipped with an ACME 3/4-5 thread. This is the typical attachment mechanism for "painter poles". The model has three positions for attaching bottom threaded telescopic…
This is a dead simple mechanism to provide an alternative for tying surgical mask ribbons behind your head. I can't ever get it right, so made these to do the job. Handy for those with dexterity issues. Intended for use with masks that…
This model consists of components that can be used to mount a lightbar on the ROP of a John Deere 1025R sub compact tractor. The design was to accomodate a lightbar wider than the straight portion of the ROP top bar via use of extensions…
A simple panel for a bottom mounted Yahboom PD Power Expansion Board to help avoid accidental short circuits. It can also be used to protect the bottom of a Raspberry Pi 5 or other expansion board. The 5mm standoffs on the holes should…
The UV-K5 “walkie talkie” radio came with an AC only charging base. This model is for constructing a DIY charger using DC voltage as the supply. This charger can charge a battery either by itself or while installed on the radio. The…
This model provides a guide for metal stamps for 3mm characters. The model has two parts, the guide and the sled. It is intended for metal stamps that measure 6mm square and 60mm long. The stamp sits in the sled, which maintains the…
We use schedule 40 PVC pipe as supports for bluebird houses. They are fitted over studded “T” fence posts. We generally use the 2" pipe but 1.5" can be used with a lighter weight “T” post. The caps presented here are configured to fit…
This model was constructed for use with a 220" telescopic antenna whip. The whip can be adjusted for operation on 20m by shortening one or more sections. A coil-shortened vertical antenna calculator indicated that configuration can be…
