Liczymy pasujące modele…
Why Just a simple picatinny mount that you can use to mount anything you like. Use it as a starting point for your own designs....or just print it and glue something to it. Maybe you've always wanted to mount your wisdom tooth to your…
Update: added an optional taller version by request Why I have T1-style red dot that sits very low on the rails of my airsoft replica's. This print raises your sight by ~32mm which is perfect if you're using goggles/helmet/mesh covers.…
Why I wanted to mount my actioncam upside-down under my airsoft pistol, using metric nuts and bolts and a bit of plastic. This is the result. Features Mounts on your everyday RIS/Picatinny 21mm rail Uses metric nuts and bolts Used the…
I designed the dagger to be somewhat true to the in-game scale, but as I have large hands I printed it at 110% to make the grip a bit more comfortable. Shows up better in pictures, too. I've broken the model up into a couple of…
An adapter to mount common 14mmCCW parts to an airsoft MP9. Tested to fit on KWA.
Why My Well MB01 came with a 26mm CW threaded outer barrel, and while adapters to the more common 14mm CCW airsoft flash hiders do exist, they usually cost around 10-15 bucks+ shipping. Features Pre-modeled threads. The thread pitch on…
A lightweight, stackable rail riser for your airsofting needs. Asymmetrical, so you can stack multiple of these if you need a longer rail (for scopes etc). Don't want to use supports? Print the chamfered model if you want to avoid using…
A simple adapter to mount common 14mm CCW parts on your 12mmcw MP7 AEG barrel
This is an adapter to fit a crane stock on an airsoft M249 Compatibility: tested to fit on my Classic Army M249, which should mean that it will fit the A&K M249 as well. According to the comments, this is also confirmed to fit on a G&P…
A simple short flash hider for airsoft. Threaded 14mmx1CCW, print without supports at 0.1mm layer height.
EDIT: Now updated with a temperature measurement. At 23c ambient the heatsink got up to 38c after writing 250GB's of data to the array. A fan bracket to mount a Noctua 40mm fan (or presumably any 40mmx10 fan) on your PERC H310 HBA. I…
A short rail adapter that replaces the stock bipod on an airsoft M249. Mount your own bipod, foregrip or flashlight
Based on Zack Freedman's gridfinity printer holders, this holder was designed specifically to fit on the Voron 2.4 (and probably Annex too) without interfering with the sidepanels. The .f3d source file is included but beware, it's a bit…
A simple fan bracket to hold a 40mm fan in place against the heatsink of a Mellanox Connectx-3. Untested at the moment, but people were asking for it. Uses M3x12 (ideally SHCS) or longer (the screws should go past the heatsink anyway,…
Converts a 1xSSD (or any 2.5") mount into a 6xSSD bracket, with multiple mounting options. If your case has 4 screw holes used to mount an SSD (flat orientation), this bracket should work for you. Multiple mounting options: Flat…
A printable, lighter gearbox shell for your airsoft M249, for use with an HPA engine. Tested with CA, should fit A&K too. I used a Digispark “arduino-style” board as an FCU along with an IRF520 breakout board, but the design should allow…
A simple fan bracket to hold a 40mm fan in place against the heatsink of a Mellanox Connectx-2. Uses M3x12 SHCS or M3x16 SHCS. Keep in mind that you're (most likely) printing this in thermoplastic. If you pick a filament with a low HDT…
Description: A small enclosure for a Senseair S8 CO2 sensor and a Wemos D1 Mini ESP board. No supports and no fasteners needed. Everything just slides into place. Tips: Make sure the wiring connects from the wifi-side on the D1, and the…
A bipod adapter to use any generic bipod on your airsoft M249. Tested on CA, should fit A&K. Maybe G&P. Does NOT fit Specna (thanks Fandaboi)
Why I bought a horizontal bar to hang my (empty) camera bags from, but forgot to buy the hooks that go with it. Rather than go back to the store I spent way more time designing and printing the hangers myself. I ended up printing mine…
A short barrel extension that matches the stock aesthetics. Required for mounting a suppressor on the para model.
Description A lightweight, stackable rail riser for your airsofting needs. Asymmetrical, so you can stack multiple of these if you need a longer rail (for scopes etc). Hardware: 2x M3 nut 2x M3x30mm bolt. M3x25mm might also work but it'll…
An adapter to mount a common garden hose quick-lock to an Einhell dipping pump.
Prints without supports if you orient the hole in the bottom (used for pushing the ESP board out of the case) on the build plate. Tolerances are tight, you may need to adjust the scale a tiny bit depending on your printer's calibration.
What's more low-poly than a polyhedron? This is a set of dodecahedral planters I made to look like tabletop game dice. Versions Includes 3 designs (open, half-open and semi-closed) with 2 variations each (normal and thin-walled), so you…
Why My colleague lost the drip tray to his Sodastream Jet machine, which was rather inconvenient. I was able to get a hold of a spare one and modeled a replacement that's tested and fits. Features Tested to fit Sodastream Jet machine…
Why We lost some of the faders to our Soundcraft Series 4 mixing desk, so I removed yet another fader from our desk and modeled this replacement. Features Tested to fit on a Soundcraft Series 4 mixing desk May fit other desks as well…
My attempt at recreating the crown/jewel for my Dragon Priest cosplay. Also check out my Dragon Priest Dagger! I made the headband from some thin EVA foam (using a soldering iron to create the groove). Then glued this crown to the foam…
Simple gopro mounts for your drone, mounts on every frame using adhesives or zip-ties. Use at your own risk.
I designed this rail adapter for my friend's new airsoft replica, the VFC FAL, GBB version. This little rail adapter slips into the rear dovetail joint and replaces the rear sight.
Have too many Pi's taking up space, or a serious case of rack-envy after browsing /r/homelab? A solution for both! Included modules (so far): Raspberry Pi 1 Raspberry Pi 2, 3 &4 Generic tray 109x70mm Generic tray 109x70mm…
Why Rack servers are great if you have a big rack to hang them in, but if you don't, you have to improvise. Also includes a little spacer for the top of the servers. It works fine for me, but use at your own risk. Features No supports…
I printed mine in ABS to be vapour smoothed, but you can use most materials as long as you coat them in something smooth and food-safe.
A cover for a Parkside (Lidl) Laser Distance Measurement tool, to protect the optics from scratches. Friction-fit, no supports needed. I used PLA, though you may want to print a little bit hotter than usual for better layer adhesion.
Why The supplied silicone head mount for my Armytek Wizard wasn't very good. They've since updated the design, but it's often out of stock and shipping is expensive.... ...So I made my own! Compatibility I've designed (and tested) this…
Why? If you own a Fuji mirrorless lens you know how beautiful the metal square lens hoods are. Sadly you'll also know how annoying they are, because they can't be reversed for transport and you have to take them off to remove the lens…
Why The vent/outlet for our mechanical ventilation in the new house was missing a cover, so I designed and printed a simple replacement Features Designed to match vent covers that are 131x45mm a piece (not including pegs) Thin enough to…
A simple adapter to directly mount an xcortech x3200 chrono to your airsoft 14mmCCW barrel. No more alignment issues.
Why My Well MB01 came with a 26mm CW threaded outer barrel and, while I have already made an adapter to 14mm CCW, I have to admit "native" flash hiders just look better. So here's a flash hider that screws directly into the outer barrel.…
Why I designed this to simplify erasing a bunch of harddrives using internal PC connections to speed things up and to allow for full SATA command transparency (unlike USB docks). It's designed to sit on top of a PC case (if your PSU and…
A simple mockup of the Galaxy Z Fold 3 foldable smart phone, to see how it fits in your hand. You can use a piece of tape on the inside as a replacement for the hinge, but do note the real phone is a bit thicker when folded (as it doesn't…
The bees are happy! The files contain two versions for the grip, both of them split in half for easier printing. Main grip top/bottom no bands is flat and assumes you want to wrap the grip with leather bands yourself Main grip top/bottom…
Why Broke the latch of my cheap Werckmann toolcase, figured I'd print a replacement. Features It fits...probably Holds the case closed (usually) Instructions Print it in PETG for a stronger part Use supports May require some filing to fit…
I don't like to carry a tripod under the best of circumstances, let alone while I'm hiking. But I do like taking some scenic shots of the night sky. So I made this stand to hold any camera at a 15 degree angle, attached with the Peak…
A Skyrim Quest marker for on your door, mailbox or wherever you want, really. Designed for a filament/color swap halfway through the print, no MMU/AMS neccesary.
A very simple endstop riser that uses M5x16 BHCS bolts that you may already have from your 2.4 build. I use the 12mm version, but you may want to use a slightly longer one for some more clearance. Friendly reminder to check your Z endstop…
A small grip to prevent hand cramps while grinding lighter roasted coffee with the Timemore C3. The little wing should keep the grinder from turning in your hand (so you don't have to squeeze as hard). Should also fit the C2, possibly…
Tested to work protecting an OM3 multimode fiber cable against a menacing Roborock S5 robot vacuum. Scale up or down as-needed.
Simple clamps that mount directly to the gantry of your K40 CO2 laser. Includes spacers for cutting thinner materials.
Flashlight lenses for Halo Mjolnir helmets. Use your slicer to scale them to fit. I designed these for Rainyfire's helmet (scaled up to 107% in my case): https://www.thingiverse.com/thing:2739764 You'll probably want to use a resin…
Why Quick design for a diffuser for an SP36. Based on measurements from reddit's /r/flashlight, currently untested. Features Has a little ridge to stop the diffuser from sliding too far Top has an inward spike that (hopefully) distributes…
I made this a couple of years ago, so sorry if the details aren't 100% clear! This is a simple bracket to mount an 80mm fan directly to the heatsink found in some Supermicro e5-xxxx V1 and V2-era servers. Note that depending on the fans,…
I didn't like the “crumpled” look that the model from the game has, so I designed my own shoulder armor piece. It retains the same low-poly look, but is easier to print and work into a full set of armor. The dovetail-like pieces are…
Why I upgraded to an SBASE board which, despite the nice little heatsink on the stepper drivers, could do with a bit of active cooling. So I designed a simple mount for a 40mm fan. Features Fits your standard alumin(i)um 2020 extrusions,…
I made this to share a laugh with some of the people at Pure and figured, why not share the .STL as well? Two versions are included, both of them can use a filament swap for the top couple of layers to make the orange P stand out.
Why I was printing the excellent beamer-to-tripod adapter made by Klenzel: https://www.thingiverse.com/thing:2638768 However, the arms were too short to reach the M4 screwholes on my Optoma beamer. This bracket is designed to interface…
An angled nozzle to help clean PC heatsinks and other hard-to-reach places. Air comes out at an angle, though not quite 90 degrees. Doing so would create a model that required a lot of supports, which I don't like. Please make sure to…
IMPORTANT: while this part fit perfectly for me, people in the comments report it's too long. It was printed on my old printer that perhaps wasn't well calibrated, so if it doesn't fit please try the remixed version that's a little bit…
A replacement shell for the Nitecore TIP (V1). 1mm thick, 0.5mm detail, should work on both MSLA and FDM. No supports needed. In order to get maximum transparency using MSLA I used a clear resin (Anycubic Clear), printed the object flat…
These kept breaking at work, so I modeled a generic replacement. Printed in ABS, these don't last as long as the originals, your mileage may vary based on material choice and printer settings.
Why This is a quick design for an autolevel probe that should fit most Delta effectors like the Anycubic Kossel, FLsun etc. etc. The probe is specifically made to support Delta printers with effectors that clamp the top end of a bowden V6…
Why? When the filament is mounted on the control box (which is safer and more stable than mounting it on top of the Z bridge) the filament grinds against the frame and can cause under-extrusion. This filament guide is optimized for use…
Kudos to Wendigo013 for the original design! Why This little piece of plastic will lock your FeiYutech Vimble 2 securely in place for transport without having to carry the nice but bulky case. It's functionally identical to Wendigo's…
Why? For the concert lighting engineer in your life, here's an audience blinder fixture that you can attach to a keychain. Features Based on the 2-lite audience blinder design Features scaled 50mm scaff clamp Does not emit any light…
Why The freezer in our new house had a missing endcap covering the cooling ribs, which made shutting the drawers difficult. A quick design and 1 hour of printing later, it actually fit on the first try! Too bad I printed it in green…
Use at your own risk. I printed this in HIPS for its superior temperature-resistance compared to PLA.
Doesn't require supports, prints in 3 parts that fit together, no need to change colors during printing.
To wszystkie aktualnie dostępne wyniki.
