Liczymy pasujące modele…
It’s my Reddit cake day, and I’m finally sharing something I’ve been using for almost a year : my custom-designed, reusable TPU cable ties . After trying dozens of designs, none of them quite hit the mark. I wanted a cable tie that: stays…
This is a quick remix. I don't have the cable inserted in the guides (see pic #2) with this cable protector I don't have to. Plus I can slide the protector more easily up when I need to connect the ADXL345 mount.…
There are tons of cable ties to download, but none of them check all my boxes. I wanted a cable tie that can stay on the cable if desired, is easy to use, easy to print, and costs minimal filament. So I ended up designing one myself. This…
I finally got around to design a cable guide to tidy up the power cable for my BentoBox. Use a small piece of double sided tape to fix the left side. It might be to long, just snip a bit of the end of it is. Thanks to the “Bambu Lab X1…
I have my X1 Carbon on a IKEA KALLAX Shelving unit that is 5 cm from the wall. When the printer poops it drops it in between the wall and the KALLAX. The poop then bounces into a large container Underneath the printer. The Bambu Long Drop…
I made this cap for the ornaments I made with the openscad script from David H. Brown Customizable Ornament (Inspired by Blown Glass) The cap and eyelet fit a 10 mm ornament end. Scale if you need bigger or smaller. I made a customizable…
I made a reward system for my kids. Everyday they do their chores they get a French fry. When they have 10 fries we go to McDonald's. I raised the bottom and made it hollow so you can add weight. Printed in red ReForm - rPET from…
This is a remix of the Sunlu FilaDryer S2 Improvement Wedge by VoltexRB with a wheel for the filament. So I can remove the spool from the dryer without having to cut the filament. Just flip the wedge if you need the filament to go down…
Inspired by the iconic Han Solo in carbonite scene, I designed a series of custom LEGO-style minifigures that appear frozen in carbonite. Each figure is a unique alien character, combining elements from various open-source models shared…
This particular game is from my wife and is now used by our children. Some face frames didn't survive the journey from the 1980. Now this game is fully useable again. And it should be able to survive another couple of generations. In the…
The bracket to mount the stock fan an the right side can be found here: https://www.printables.com/model/213509-right-side-bracket-for-ender-3-s1-stock-fan
I needed to connect my Razer Seiren Mini microphone to a camera tripod so I quickly made one. It took me 30 minutes to design and print this with help from these models: Mic Microphone screw thread extender. 5/8" five eigths inch. by…
I bought and installed a Creality Sprite Pro extruder. So I had an extra parts fan and wanted to improve cooling on My Ender 3 S1 anyway. So I quickly hacked a bracket to mount the fan to the right side. It seems to be working pretty…
An easy way to store filament when switching colors. The tolerances are tight! Scale a little to get the best and snuggest fit! This works great when combined with: Ender 3 S1 Secondary Spool Holder…
Print without supports, maybe use a brim or mouse ears. Print without support, maybe with Rin
This is a camera mount for the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 on the ender3s1 by Sneaks : https://www.printables.com/model/3407-articulating-raspberry-pi-camera-mount-for-prusa-m
WireWrap is a thoughtfully crafted 3D design, created to prevent my toaster cable from faling onto my nose (again) when I retrieve it from the shelf. While it's perfect for the toaster, it's versatile enough to manage cables of other…
I made these cap, s hook and eyelet to complement the ornaments I made with the David H. Brown Customizable Ornament (Inspired by Blown Glass) Install OpenSCAD , open the files and use the Customizer panel on the right to create yours.…
This is my take on the spool storage drawers. The drawers are from “Customizable Spool drawer - storage box” by Remivans on Thingiverse. I added the scad files with the dimensions I used. https://www.thingiverse.com/thing:3110569/ NO…
"A OpenScad file so you can create your own custom ring for any cardboard spool. Use the customizer in OpenScad to tweak the rings to your liking. You can add notches to the rings so they do not spin by themselves. I have included…
This is a plug for the “vomiting” baby Yoda to keep the toothpaste running. Print slow! Is is a small model and it will print in under 15 minutes even if you go really slow. No support needed. Just cut the plug to the desired length and…
This is a stand for a puck screen of 58.5mm I am finally able to use my bottomless portafilter without spraying the whole kitchen with coffee. I cannot get my wife to use WDT tools or even dared to suggest getting a single dose grinder.…
This is a top cover for the BentoBox by thrutheframe to incorporate a thermostat switch I had laying around. At 30°C the fans for the BentoBox turn on. Be sure to by the NO Normally Open switch, so the fans turn ON at 30°C, see the…
This is a 3D printable shelf support pin to support a shelf :-D Just scale up or down to fit your shelf supporting needs. It is also used as a hinge in the SSSStorage organizer:…
A headphone cradle for the Hifiman Sundara. Inspired by the Hifiman Shangrila Headphone Stand.
Print without supports, maybe with a brim or mouse ears.
I initially wanted to buy a MX Ergo Plus but they were not available at the time. So I went searching for a wedge I could print myself. I have tried many different designs the last year or so and even designed one myself. But I still was…
Wide angle raspberry pi came case for the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 by Sneaks . The case has to be printed with supports on build plate only. This case fits the following wide angel camera for the…
The first year I noticed that sometimes robotic lawn mower would get stuck at the entrance of its charging lair and the wheels would dig a hole. After that season there was no grass anymore in front the lair. I heard similar stories of…
check it! to do list and progress bar are made to work with Post-it notes. Or use them to hold any paperwork or photo that benefits a check mark or progress tracking. Current check it! variants are: single check it! check it! 5 times…
This is my first OpenSCAD design. It is a customizable version of the design: Cable Holders. Choose Your GAP! Open in OpenSCAD and go crazy, make a cable holder for as many cables you like. Customize cable diameter and gap size. I have…
This is a very sturdy bed table 20 cm deep 15 cm wide and 15 cm high for my daughters loft bed. It fits a 20 mm side board. The table was designed for a glass of water and to fit the Yuki Air Cooler .…
LEGO is great but keeping them organised is always a problem. So we bought several LEGO storage boxes. These boxes had a BIG design flaw. the connectors on the bottom are hollow on the inside. Small LEGO brick get stuck in them all the…
I have added the OpenScad so you can customize the spool for other refill sizes. This spool has storage openings for 1.75 mm filament in the flanges and in the hub. You can create a spool with or without a hub cap or just the hub cap by…
Replacement knobs for the Squeezebox Radio. I printed them in Perth
Use 10x3 mm magnets and pauze print at the height just before the hole is covered. I have so many cables with such a diversity of diameters. So I made a collection of cable holders that fits at least my needs. The side of the cable holder…
Scrooge McDuck-Inspired Piggy Bank with Night Light Feature Embrace the charm of Scrooge McDuck's Money Bin with our unique piggy bank, featuring a creative "Money Wall" to avoid the emptiness of a new bank. It includes a plug for a…
An easy print to have your display loose from the printer. I printed the stand with 3 perimeters and 10% cubic infill in PETg.
Just print the brackets in your preferred orientation and use the spacers to mount the brackets. You can modify the height of the spacers to accommodate the m3 bolts you have.
I was printing a Christmas ornament in vase mode and my daughter loved it. So much so that she asked me if I could print her a heart the same way. So I sculpted this heart to share with her. To make the halves magnetic use 2 (or more)…
These brackets let you customize how the Navigator trackball integrates with your Voyager keyboard . They reuse the magnet, screws, and back-plate from the original Navigator mount or buy 60x13.5x5mm magnets for example from Amazon and…
A practice object to enhance your welding technique.
I made a mini goose neck for my Quooker that also prevents back flushing (hopefully). It screws in the bore hole of the original Quooker drill bit. Prints without supports. I printed mine in ABS.
Secure your Scandyna SE MK2 (Micropod) to your desk with a clean, angled bracket that improves stability and sound direction — no supports needed. This is a remix of the original wall bracket design by Gurgelx — big thanks for the solid…
Uses 78,5% of filament and saved me 1 hour in print time for me compared to the original. I printed this with a 0.6 nozzle in 3 hours and 21 minuten. Instead of 4 hours 25 for the original version. Print settings i used: layer height 0.3…
If you print and like this keyboard raiser, please consider buying me a coffee or use the donate button. I had several Microsoft keyboards with the option to raise the front and create a negative tilt to the keyboard. This was very…
A Fruit Fly Fright Night, a spooky solution to those pesky fruit fly infestations! This unique fruit fly trap is designed especially for repurposing Bonne Maman jam jars, turning them into a perfect blend of functionality and…
62x42x5 cm / 24,4x16,5x2 inches. Use cardboard for the middle of the stone. You can print all parts on one plate. I have included 3mf files for Bambu Lab X1/P1P and Prusa i3 MK3S. You will need around 480 grams total of filament for this…
I printed this compact and filament-efficient case using PETG , ensuring durability while keeping material usage to a minimum. The design is small, lightweight, and optimized for easy printing without sacrificing strength. The hinge is…
Blade Razer 15 Studio Edition power adapter holder for underneath my desk. It is easy to remove the adapter when I go on the road.
A hub cap that goes in the hub of the LockSpool (V3) for the Filament label from the box or original spool. This is just the cap for a hub with a bearing diameter of 52 mm. You can find the OpenScad file where you can customize the spool…
“ Sony Xperia 1 IV protective cover ” by goury is licensed under Creative Commons Attribution-ShareAlike . I recommend printing with a flexible filament such as TPU. I used paint on the supports for all the slits of the case. Be careful…
I made and printed this in the hope of reminding my kids to clean the toilet after using it. Both models are signed. Print with 1 perimeter and 100% infill. With a layer height of 0.08mm with a base layer of 0.2mm. Filaments Used: PETG…
These tenting adapters are designed for easy installation on the ZSA Voyager keyboard halves. The adapters are printed in TPU for flexibility, while the feet are printed in TPE for a secure grip. No supports required for printing. You…
I had been looking for a good headphone stand for ages to buy or a ready made model to print. I could not find one that checked all boxes, so I designed one myself. I have an ARCAM.rHEAD headphone amp and designed the stand to fit the amp…
This eye hides the screw of the wall hook I remixed. Just add a dot of (hot) glue and stick it in your preferred expression. Just flip the model if you want your cyclops to look the other way. I have included 2 versions of the eye. One…
After months of testing, I'm ready to introduce the FrameFeet replacement pads for Bauhaus-inspired tube frame chairs. I can confidently say that the FrameFeet for my Zuiver chairs are performing exceptionally well. They appear to be more…
Here is a cookie cutter to create Dutch Christmas Cookies called kerstkransjes. And when they are done you can make the in a UFO :-P These cookies have a diameter of roughly 6 cm and the hole is 0.8 cm. The UFO part can be printed in vase…
This is my second iteration of inserts for LEGO® storage bricks and heads. My first version was made from PETG, but the rigid material didn’t work well, they got loose in the end. With TPU (A95) these rings are flexible, press-fit…
Print the Ghost Scene with 0.2 layer height and start with black, change filament to Grey at layer 16, change to White at 18 and optionally change back to black at layer 20. I have included 3mf files for colour changing at the correct…
This is a hook for my Buhres apron so I did not have to drill or screw in the kitchen cabinet. It slides over the top of the side 19,3 mm panel of my high kitchen cabinet.
I quickly made a cover for a hole I drilled in the backboard of a kitchen cabinet. Covering and protecting the electrical outlet behind it. My hole was 74mm, scale to your liking.
The original watch crown would sometimes snag on my clothes and pop off the watch crown. After this happening 4 times and me with great luck finding it those times the fifth time the ring was lost. So I made a new one in TPU.
Printed in PET-g with 3 perimeters and some short M5 screws and T-slot nuts.
To wszystkie aktualnie dostępne wyniki.
