Liczymy pasujące modele…
This is an original, 3D-print-friendly reinterpretation of a classic clip-on rectangular lens hood, inspired by the vintage NKOBE 200510 accessory. The model has been redesigned specifically for modern 3D printing , with adjusted geometry…
A rear lens cap to fit all variants of DKL lenses. I have designed it to be simple and light on materials, protecting the rear optical elements only. This has been tested with PLA and PETG, and fits Retinas, Bessmatic, Vitessa and Iloca…
A heavy duty C-Mount lens cap with a 12mm deep cavity, to accommodate lenses that had protruding rear elements. I have also designed this cap to be wider and heavier than most factory caps, so the lens may stand on the capped end and…
This model adds a NATO rail to a 2x3 Centruy Graphic, using only existing strap lugs and one Socket Head 1/4-20 UNC x 3/4 bolt in the tripod socket. The tabs at the ends engages the factory strap lugs and 1/4"-20 bolt pins the rail in…
DESIGN This adapter allows an original, unmodified Gossen Luna-Six and Luna-Pro exposure meter to operate from modern batteries. These meters were originally designed to use two 1.35 V mercury cells (MR-9/PX625 type) . Since mercury…
This is an Enlarger Lens Bubble / Protector / Keeper that mates with the screw-on measuring cap from P&G laundry detergent such as Tide / Gain / Aerial. Forming a protective enclosure. It will also fit other Leica thread mount lenses such…
A sharpener to restore the point on jumbo crayons ≤ 15mm diameter, with 4 point styles: Fine Cone - for fine detail Standard Cone - for everyday use Blunt Point - durable and consistent line Bullet Point - great for toddler play This…
A 3D-printable lens board for mounting an Ilex No. 3 Shutter or Barrel on a Baby Graphic / 2¼ × 3¼ Graphic camera . Two versions are included: A board for the factory original four-hole Ilex mounting flange A board with the Ilex No. 3…
I made this cap to fit the cap that comes with your laundry detergent. These laundry detergent caps are usually thrown away, but with this model you can up-cycle it into rugged general purpose or custom containers. The cap this model…
A 3D-printable lens board for mounting a Copal Press No. 1 Shutter on a Baby Graphic / 2¼ × 3¼ Graphic camera . Because the Copal Press No.1 is unusually large for a Baby Graphic, the lens board locking mechanism interferes with the…
A 3D-printable lens board for mounting a DIal Set Compur No. 0 Shutter on a Century Graphic (Baby Graflex) / 2¼ × 3¼ Graphic camera . Application Notes: - Tested with PLA and PETG - Print camera side up. - 0.20mm layer height. - Use scarf…
This is a ball end for 20x20mm extrusions. I originally made it to provide a way to protect the sharp edges of cut 2020 tubing. ⌀56mm Two versions is available: Slip-On (Yellow in the photos}: Simple friction fit, temporary attachment.…
A deep (10mm) D-mount rear cap that is Gridfinity compatible. I find it useful to organise lenses on my work bench or storage container. It can also be used as a rear lens cap as-is, and stop the lenses from rolling off my bench. Thread…
Here are a few adapters I made a while back to adapt Agfa Staeble made Repro lenses to M57 mount on the Bronica S2/S2A. These lenses comes under a few brands such as Ultragons, Repromaster, Intergon etc. From what I understand they are…
This a lid for Weck Jars with 100mm opening, friction fit. I initially designed this lid to store and display small giveaway items at fairs and swap meets. The wood pattern seen in the photo is wood modifier by jattie , please see his…
An adaptor to attache ILEX #3 Shutters or Barrels to M77 Helicoids that is used in various 3D printed camera builds. Thread specs.: Ilex 3: 1.913"x40 TPI M77 Helicoid: M77x0.75 Printing suggestions. 0.15mm layer height Avoid crossing…
A simple screw-in lens cap for Kodak Signet 35, to protect the excellent 44mm f/3.5 Kodak Ektar Lens. Available in 3 functionally identical variants: - Plain - with Period Correct logo - with Classic EKC logo Thread spec is M26.5x0.75…
I designed this model to be a superior alternative to the factory caps and keeper that originally came with Jupiter-12. This model upcycles a cap from P&G laundry detergent such as Tide/Aerial/Gain. You'll need one of the new style caps…
This model is a DKL lens rear cap that covers the full rear end of the lens. Two versions is available, one for lenses with aperture ring (Green in photo) and one for the lenses without aperture ring(Red in photos). This should cover…
I made this mostly as an aid to measure actual focus distance for camera building, but I'm sure some adventurous soul would find some photographic application for this. I'm sharing in the hope that it might be useful. Thread Specs.:…
A 3D-printable lens board for mounting a Polaroid COPAL MP-4 Shutter on a Baby Graflex / 2¼ × 3¼ Century / Crown Graphic camera . The MP-4 shutter is a variant of COPAL PRESS that has no aperture. Originally it was part of the MP-4…
These are some lens boards I made for a Busch Pressman C way back in the early days of 3D printing. I no longer own this camera but I do remember this board being a perfect fit. A no hole version is included, you can add your own hole to…
A 3D-printable lens board for mounting an Compur / Copal No. 0 Shutter on a Century Graphic (Baby Graflex) / 2¼ × 3¼ Crown Graphic camera . Yes. The Compur and Copal shares the same geometry and often interchangeable. Application Notes: -…
A 3D-printable lens board for mounting a Wollensak RAPAX / GRAPHEX No. 2 Shutter on a Century Graphic (Baby Graflex) / 2¼ × 3¼ Crown Graphic camera . Manufactured by Wollensak in Rochester, this is the same shutter that is commonly…
A 3D-printable lens board for mounting a Wollensak ALPHAX No. 1 Shutter on a Century Graphic (Baby Graflex) / 2¼ × 3¼ Crown Graphic camera . Application Notes: - Tested with PLA and PETG - Print camera side up. - 0.20mm layer height. -…
A replacement eyecup for karlart rangefinder, printed in TPU. I made this eyecup to replace a deteriorated rubber eyecup on a friend's Crown Graphic, should fit other cameras that uses the same rangefinder, such as Baby Graflex, Burke &…
This model is a stackable container to safety store and transport you lenses mounted on 4x5 Crown Graphic and Super Graphic Lens Boards. This design uses a widely available IKEA 365+ mix and match series, rectangular lid. IKEA Article…
This model is a stackable container to safety store and transport you lenses mounted on 4x5 Linhof Technika Lens Boards. This design uses a widely available IKEA 365+ mix and match series, rectangular lid. IKEA Article Number: 405.779.43,…
A 3D-printable lens board for mounting an AGC Prontor / Pronto / Vario No. 0 Shutter on a Century Graphic (Baby Graflex) / 2¼ × 3¼ Crown Graphic camera . AGC Prontor / Pronto / Vario No. 0 Shutters are frequently encountered on fixed lens…
Inside cover for my Ohaus 5601 Sto-A-Weigh Pharmacy / Apothecary Brass Weight Set was misplaced. So I made this model to replace it. These covers also fit a similar set made by TROEMNER Larger cover is 20x98mm Smaller cover is 13x90mm
This model is a stackable container to safety store and transport you lenses mounted on Century Graphic (Baby Graflex) / 2¼ × 3¼ Crown Graphic Lens Boards. This design uses a widely available IKEA 365+ mix and match series, LARGE…
A 2x6 Gridfinitiy tray for organizing Century-Graphic / 2x3 Crown Graphic / Baby Graflex lens board. Secondary use is organizing enlarger lens with custom boards based on Century Graphic board dimensions. This will print on Core One sized…
Improved, Non-Marring TPU feet for World Market Wood and Metal Multi Level Coffee Tables: 507656 - End Table - Two Levels 516594 - Coffee Table - Three Levels You will need to source: 3x 10-24 x 1/2" Hex head bolt. 3x 1" Felt Pads…
This model turns 3/8" width embossing tape into a mini sign, useful for display cabinets, identification tags, price tags or museum display sign. No need to peel the tape adhesive, embossed tape is held in place mechanically by tension,…
To wszystkie aktualnie dostępne wyniki.
