122 modeli
Deckeleinsatz für Spaghetti-Eisbecher von Edeka, Aldi oder Lidl. Senkt den Verbrauch von Reiniger bei kleinen Teilen. Das Gerät mit Wasser wie gewohnt auffüllen und dann die Reinigungsmischung nur in den Becher füllen. Für Vevor JPS-10A…
The Fairchild Republic A-10 Thunderbolt II is a single-seat, twin-turbofan, straight-wing, subsonic attack aircraft developed by Fairchild Republic for the United States Air Force (USAF). In service since 1977, it is named after the…
It's a M-10AF Lexington from Cyberpunk 2077 with movable magazine and shutter Videos about this model: https://vm.tiktok.com/ZSJBu1mJ2/ https://vm.tiktok.com/ZSJBmwtf6/ https://vm.tiktok.com/ZSJBujJXk/ Print Settings Printer: Artillery…
Scalpel Cover of Swann-Morton No.3 Handle with 10A or 11 Blade . Not yet tested No.11 Blade, would be grateful if someone was able to confirm compatibility. Affiliate Disclosure : As an Amazon Associate I earn from qualifying purchases.…
This is meant to be printed using flexible filament (eg. TPU 98A). I don't actually own one of the devices, so please provide feedback. My personal preference is to turn off top and bottom layers and use a 12% honeycomb infill.
This is a case for a 5V 10A power supply, I made for a project of mine. It has a built in power switch and an AC connector so it can be unplugged from power when needed. Before you print the part make sure it fits your power supply! STEP…
You might be familiar with my original conversion . Well, I've since made a version that replaces the top cover of the camera with a custom 3D-printed design that allows clearance to eject Instax Wide the right way up. It even has…
Updated with the newest version, this conversion is now non-destructive and reversible! 4 August 2023: If you're converting a 110a, 800, or 150 - take a look at the newer, deluxe version of this conversion. It's easier to print, looks…
Junction box for Reolink RLC 810A, 1212A etc.
very simple case for the HW-070 PWM module. pretty much it.
Desktop BlueSCSI V2 mount with a single screw. For board revision 2023.10a and newer ONLY. Design by Alan Williams.
Note: That the image is of the previous BlueSCSI v2, which I have designed a bracket for in the past. This bracket is for the 2023.10a. A bracket for the previous version is also available. Features There is a slot in the side to make…
Template for mounting plate for ZyXEL routers: [NWA50AX] https://www.zyxel.com/global/en/products/wireless/80211ax-wifi-6-dual-radio-poe-access-point-nwa50ax [NWA90AX]…
The cards I purchased only came with the low profile brackets as standard so I designed these in Fusion 360 as replacements. These print laying flat and both the PCB mounts and the stiffening brace fold back into position after removal…
This cover designed to be used with M4x16 bolts and nuts. I recommend printing it with PETG since it's intended for the outdoor use. I've attached the original CAD file (FreeCAD), so the model can be adjusted to fit various needs.
I used to be an A-10A Crew Chief and the fact that the GAU8 Gattling gun can fire 70 of these 30mm projectiles per SECOND just blows my mind. The actual empty 30mm shell is pretty easy to find and are pretty cheap. However, if you get one…
Re-design the interior to fit #10A blade. Also fits blade #11. Related Links:: Swann-Morton Blade extractor More Info about this design Filament I Use:: eSun ABS+ (Fire Engine Red and Black) My Channel: YOUTUBE CHANNEL:…
This is an air assist nozzle for the Ortur LU2-10A. It features 4 very strong neodymium magnets 5mm in diameter by 5mm in thickness and a 3/32" od brass tube. The magnets protrude just about the surface enough to fit into the impressions…
Voron2.4 Skirt Mod Power outlet
Overview: This is a power supply cover/enclosure to contain he wiring, electronics, and input/output connectors for a 24V AC to DC power supply. It allows me to safely convert electricity from the wall (230v) to 24v DC power for all of my…
A front picatinny rail for the Novritsch SSG10A3, or the MLC-S2 Skeleton Stock from maple leaf in general. Also added the .f3d (Fusion) file, in case someone wants to remix for example the base of the model. I printed it on my prusa…
This model is compatible with the lego system.
The model BlueSCSI_HP_3x2_FDD_mount_v2 v1 to be used instead of FDD inside HP 362 or 382. BlueSCSI_FDD_mount_v1 v1 is in the shape of FDD drive and is intended to be used in any computer. Can be printed without supports with front face…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Portafilter tamping station in two variants — for basic portafilter or with unscrewed spout (pic3)
I bought the Hiletgo PWM speed controller to change the speed of a 12 volt fan, but it does not include an enclosure box. It was only a bare PCB Board. This model will house the PWM controller using four pegs that will fit through the…
Adhesive assembly required. .step included. Remix If you want to use it as a template for your own mount, try looking at https://www.printables.com/model/341266-step-zyxel-nwa50ax-nwa90ax-nwa110ax-mount-plate-te Slicing guide: Enable…
The Ortur Z-Adjust Unit does not come with a plate that works with the newer LU2-10A laser module. This piece screws into the adjustment slide that is mounted on the X gantry, and then the laser attaches the same way it attaches to the…
Overview Designed with precision and robustness in mind, this protective case is specifically tailored for the BTF-Lighting A24V10A PSU and controller. Its hefty structure, with 1cm thick walls, ensures unparalleled protection for your…
AC Power Supply Connector IEC 320 C13 Socket 10A Fuse Switch
This is part of a set of beginner friendly 3D printable ribs I created for myself. The edges are soft as to not tear the wall. Friendly for even potters just finishing their first 6-week class without the most centered wall. The duller…
Rescaled model without power and sound buttons. Please be aware that i did not calibrate my filament beforehand, so i cant 100% guarantee that the case will fit. It will be quite snug anyway. I used pctg filament, no top and bottom layers…
A fast and easy to print wall mount for your Surron charger. Don't forget to activate Supports: Everywhere If you like this design, please post your print with a picture. Anybody willing to support with a small donation is more than…
The bracket have standard 6-32 UNC thread for the fixation to the computer. Mounting pattern is from Toshiba HDD specification sheet. BlueSCSI is fixed by M3 screws. Tested with HW revision 2023.10a
Reolink RLC-510A Camera HSW Mount (may work with others) Takes 3 x heat press inserts (~4.1mm diameter ones - the ones for 3M screws). Print upside down, suppressing any tabs you don't want. I printed in PETG, but anything should work.
FlukeEmu 9010A Case The case was designed with specific parts as there are just too many variations of items out there. 7" Touch Screen https://www.amazon.com/gp/product/B07L6WT77H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Micro SD…
Remix to adapt the model for the TB10D to fit the TB10A. Power brick is identical, so no change to that model.
Bare Bone Case Design for Google Pixel 10a! More phone case designs for all high-end phones coming soon!
Support pour alimentation 12V 10A https://www.amazon.fr/gp/product/B01E6RMASC/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Remixed this from another tripod leg-mount adapter. This one is designed to hold a 12V-10A power adapter brick that I use for powering my Astrophotography rig with a Sky-Watcher EQM35-Pro mount. The grips attach nicely to the leg, so I…
I upgraded my Ortur LM2 Pro S2 with the new 10W LU2-10A laser module and needed something for cable management and a mount for the new circuit board that comes with the laser module. As additional information - our Ortur Laser is mounted…
A replacement center cap for a Moyu Weilong v10 10AI or V11 cube. Magic 3x3x3 cube. Think Rubik's Cube. It may work with other Moyu cubes. Allows full reverse corner cutting. Snaps into place though not as well as the factory version. The…
Case to mount a SBT-10(A) tube and some space for drive electronics and a usb c or micro cutout. Should work with ESP D1 Mini glued in with the shield-can towards the case.
Solves snags of laser cable and air assist hose for Ortur LM2 and 10a module. Prints designed to hold large cable ties to act as a spring. White cable tie shown is nylon with 8.5mm x 2.2mm band. Print should be slight press fit. Holes and…
Power strip EPS-503W-2 250v 10a mount. As you can see the power strip itself is not that standard-shaped, but i have managed to design and create a mount for it = 3DPRINTING RULEZ!!!!111oneoneone Print instructions Print can be done…
EN: Cover to close the screw holes of the reolink RLC-810A DE: Abdeckung um die Schraubenlöcher der reolink RLC-810A zu verschließen Parameter: Material: TPU95 Layer: 0,2mm Infill: 100% Support: None
Case for an inexpensive Aliexpress power meter - Deek-Robot DC 100V/10A Power Meter measuring volts, amps, watts. Accepts DC input (minimum 7V) via banana plugs or standard 5521 DC barrel (5.5 x 2.1 mm) jack. Embossed text added in Orca…
10A Rocker Switch This thing is a model for the "Black 凹Sided弯曲 SPST O - 21mm 10A Solder Lug 250V 24.2mm 15mm Plugin Rocker Switches ROHS" component found in the JLCPCB library. I designed this so I could have an accurate representation…
I adjusted the mounting holes for the newer version of the BlueSCSI v2 (2023.10a). I also created a single piece model for people wanting to print using resin and not needing the two part version for improved FDM printing. My plan is to…
Turns the oversized shoe into a dual standard shoe
Toyota Body Plug 90950-01710A. Print with TPU, the lower the shore hardness the better. Might be a tight fit, so use a small tool to tap it into place if you choose to use a harder TPU.
I wanted a way to mount my Fosi Amp to my sim rig and came up with this design. Enjoy! Print Settings Printer Brand: Ultimaker Printer: S5 Supports: Yes Category: Electronics
For details see video: https://youtu.be/ ... to be linked when published
A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It is 110mm tall and 68mm for the x and y axis. The photo shows the vase printed in vase/spiralize mode with 1 wall and 3 bottom layers. The stl file is…
Updated version Designed for Nermak 10Ah battery but will likely work with other 10Ah batteries.
I wanted to mount the power brick to the side of my sim rig and designed these. Enjoy! Print Settings Printer Brand: Ultimaker Printer: S5 Supports: No Category: Electronics
this is a case for the google pixle 10a phone with a G logo on the back and a hexegon shaped hole in the midle for the "G" logo on the back of youre pixle10a (sory no actual pictures yet)
3D printed hard phone case (designed for PLA or PETG or similar). 1mm shell thickness. Front face of the case sits level with screen. Good fit with accurate, chamfered holes for USB-C cable, speakers, environment microphone, camera, LED,…
Cale de fixation pour PCB du module compatible Arduino : KY-019 4 écrous carrés M3 DIN 562 5.5x1.8 4 x Vis CHC DIN 912 M3x10 1 x Barrette 2.54 : 3 contacts Fixing block for PCB of Arduino compatible module: KY-019 4 x square nuts M3 DIN…
When converting a VSR10 airsoft sniper to left hand (e.g. with https://eu.novritsch.com/product/ssg10-left-hand-conversion-kit/ ) you end up with a hole where the bolt rested previously. To protect the internal from dirt and debris, as…
I made a copy of stepper motor. I needed in one of my projekt.
A phone case for the Pixel 10a. Slightly smaller than commercial phone cases because I reckon they don't need as much protection as they give. e.g. the back is thin because the phone's back is plastic and won't break like glass would. The…
This is a power supply enclosure with room for an ESP32 module to control WLED interface. Included with 2 ports for power injection at the users discretion. **ALL HARDWARE IS M3 AND M3 HEAT INSERTS ARE REQUIRED **STEP FILES HAVE BEEN…
The cover is necessary to protect the power supply when it is mounted in the central control cabinet
This is a cover for a generic style power supply that allows you to use a standard plug socket and voltmeter.
Cap to provide strain relieve to the power cable where it connects to the LU2-10A Laser Module. My cable got yanked, so the socket isn't as secure. This allows the cable to be fully supported and not wobble loose in the top of the module.…
https://www.aliexpress.com/item/1005004652373175.html?spm=a2g0o.order_list.order_list_main.127.67141802BpfpaN
Housing for the gate controller Yunshan 7-30V 10A Relay Board
Tired of spending 10 minutes to attach and release your mixer from the stand and losing the screws/washer on the floor or the stand's bag...attach these 2 parts more or less permanently to your mixer and stand adaptor and then just slide…
Deckeldichtung für Vevor JPS-10A 2Liter 175x160mm Mit Pattex Classic Kontaktkleber befestigt. Filament: TPU
print in PETG or Nylon (scale up few percent for nylon)
Full instruction with list of individual parts for Seat Leon 5F 5F0071610/5F0071610A Aero Side Skirts Mounting Kit is not available to order separately without Side Skirts. Also Side Skirts are rarely available to order from the dealers.…
This is a convenient piece for making a clean conversion of Apple's m0110 and m0110a keyboards (and, by extent, any other keyboards supporting the Macintosh Security Lock ) to USB type C. I suspect that you've come to this post, knowing…
Housing for FPM10A called also DY50 to easily fix to wall / door etc. Top cover is snap in. Holes for screws and cables. Upper part is closed to keep light inside. My first version was open from the top and light shined to the door.…
Model of Fingerprint sensor FPM10A called also DY50. Useful for projects in Fusion306. Housing made with this model https://www.printables.com/model/1149569-fpm10a-dy50-fingerprint-sensor-housing-wall-mount Category: Electronics
You'll additionally need two of the 52.5mm version of these brackets: https://www.printables.com/model/420009-din-rail-bracket-heat-insert-version-525mm-625mm
Holder for 10AH Ardumower Battery
This will be a tight fit once all together. I cut out holes for an IEC panel mount power input, and a 3 pin 16mm aviation plug so that the power input wires, and the WS2812b power and signal wires can be easily attached and detached. The…
Hibrew H10A Drip Tray for bottomless portafilter or portafilter without spout (you can unscrew it from your portafilter)
Arbeit Organisieren
This battery holder is designed to house a 10Ah lifepo4 battery for electronics projects. Mounting hardware is #6 machine screws or can be glued down. The corresponding file for the battery clip is included as well.
simple support to place Harley Benton power supply under pedalboard with 4 screws
Completely 3D printed, no additional parts needed, headphone measurement stand using clone E610A coupler and clone KB501X pinna. This design aims for a single ear measurement. For a double ear measurement, use smaller couplers or consider…
Power regulator 30V to 1.2-30V 10A U and I viewer + pot 10k and 1k for more accuracy. Material: https://www.wish.com/c/557eb15c5acb2919d05b44eb?th\_s=1&rel\_p=0&abs\_p=0&original\_q=5%20pairs%20ampli and…
New end for the ON/OFF switch push rod
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/j6Y03d6NMtU Category: 3D Printing
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a simple mount to attach a Reolink RLC-810A to a 38mm or 50mm mount originally intended for a satellite dish. It requires the following hardware to assemble: 7x M4 heat set inserts (Ruthex or CNC kitchen) 4x M4x20…
This is a 45° tilted stand for the Turnigy Reaktor 250W Charger. It's designed to print quite easy and then be screwed together with 6 m3x16 screws. This set of screws from banggood works very well and is very handy to have for a lot of…
These connectors keep the two wires together for the BougeRV 20 Feet 10AWG Solar Extension Cable. So odd they are made as separate wires. These are easy to Print. I think I am using about one per foot. Print in FLEX/TPU otherwise this…
Digitální voltmetr, ampérmetr, měřič výkonu 79,5*43
Parametric case for the Cheerson CX10A quadcopter. Plenty of space inside for spare propellers and even the USB charge cable if you coil it correctly. Prints without support. Category: R/C Vehicles
This is a flashing adapter for the HK 10amp UBec ESC. This will give you a clothes pin style clip to make contact with the contacts on the board. I am not going to go into details on flashing the ESC as there are already numerous sites…
Remixed the Corona tested file to fit the slightly different dimensions of the BD-10A, which is not sold as a corona treater, but is effective in my lab for preparing PDMS and glass to covalently bond. The BD-10A has a longer electrode…
I have constructed a housing here so that the power terminals are covered and the cables are strain relieved. Material: 4x M3 screws 4x M3 threaded inserts 2x Steel pin 3x14mm CAD Model…
A case i made for the common cc-cv step-down psu. Link for the one i bought. https://www.aliexpress.com/item/32888919328.html?spm=a2g0s.9042311.0.0.27424c4dWujpWg Or this (cheaper shipping for me): http://s.click.aliexpress.com/e/_d84C1Li…
Made a inlay for a 10ah Lipo4 Battery or other such sizes, in my case it was a cyclenbatt 10ah. Reasoning behind this was to make a small 10ah battery box which has a outer led light, and a usb/usbc charger for devices. 20 infill no support
Simple holder, made for use with zip ties but you can drill holes in to your hearts content to screw it into anything you want, preferably not pets. V2 Files dont have all the Zip tie Holes so drill your own Holes Category: R/C Vehicles
Case for 10a 250w CC CV Boost converter with cable strain relief. Can be printed without any support. You will need 4x20mm M3 standoff and 8x6mm M3 screw (4mm and 8mm length are ok too). Case was designed as counter-sunk for support-less…
A tough, grippy case design. Should withstand some drops judging by a similar design on my Pixel 7. (See the Cuttlephone repo for that one.) Recommended settings: Print with PLA grid supports, I had to adjust the pattern angle to 45…
