168 modeli
This adapter adapts the Ryobi 10 inch One+ Miter Saw (P3650) dust collector output to the Ryobi 6 Gallon Wet/Dry One+ Vacuum (P770ID). It may very well work for other miter saws and/or shop vacs but these are the ones I own, designed for,…
This is a 10" mini rack mount with optional retention features. You can use the keyholes on the bottom of the device with M3 button cap screws, or the retention clip with a M2x8 button cap screw and M2 square nut, or both. Possible future…
I saw a bunch of 10in server racks when looking to get started with a HomeLab to tinker. Everything was built on an ender 3v2 so some parts have to print solo at an angle to accommodate the bed size. I used overture PLA The Lenovo…
10in rack mount for the Netgear GS-108 8port gigabit ethernet switch. Based on the 10inch_TP-Link_SG108.stl by https://www.printables.com/@mariusbach_1431080 since the TPLink SG108 is roughly the same size as the Netgear Switch. Printed…
This DHD is a remix of a 3D model by "Adder" that I found on Google Sketch-Up 3D Warehouse. https://3dwarehouse.sketchup.com/model/9680dec40b8e7de4de23d525ec10a4eb/DHD I modified the design to make it 3D printable. You will need a printer…
I have an updated version at the following link https://www.printables.com/model/753753-3d-printed-marching-tenors-with-attachements Small tunable drums using standard drum heads and 10-32 x 1-1/2" screws. This was modeled in Fusion 360.…
This is the SKELETEN, a strong, modular, easy-to-assemble 10-inch rack. It is called the Skeleten because it features bone-shaped side supports and it is, well, a ten-inch rack. I wanted a strong, simple, modular 10-inch rack for my…
Simple and helpful 1U Raspberry Pi with SSD 2.5" rackmount for 10inch network cabinets. It supports 3 Raspberry Pis. How to print: Print with 0.30mm layer height and 70% gyroid infill. Make sure your print is in PETG , ASA , or…
Hi since i got an 10inch rack i wanted to rackmonut my mini Server in it. Unfortunatly there are only 19inch Rack mounts avalibile online i created my own for my Wyseclient 5070. Printed in ASA on my P1S i recommend ASA it could get hot…
Original model was too tight and mounting holes are to narrow/far for some racks. Print 2 one for front and one for the Back. I used ABS to print it you can also use PETG. More infil - stronger part! I used 4 walls, 5 shell layers, 10%…
Remixed towilab's design to allow for access of the UCG max's SSD port. Made the L-portion of the ‘clip’ on the right side a bit more aggressive while removing the left side one entirely, allowing super secure retention despite only…
This is a matching shelf for Unifi Cloud Gateway Ultra. Fits with the lenovo tiny shelf, my TrendNet mod and my FritzBox mod. Printed with 10% infill and supports (slicer complains without, but I don't think there really are supports)…
This model can fit an ITX Motherboard and 2 80mm fans in a 2U form factor. Model includes some holes for zipties to manage cables. I've included an optional backplate that can be modified to suit any cutouts you may want. Bill of…
This is a matching shelf for D-Link DGS 1008P POE Switch. Fits with the lenovo tiny shelf, my TrendNet mod and my Cloud Gateway
Case for HMTECH 10" Capacitive Touchscreen I recommend PLA over ABS to avoid issues with warping, especially if using a Prusa MK3S, because the model goes all the way to the edges of the print bed. **In order to make it fit in the print…
Originally model was prepared for GS305EP switch, but considering size of other GS equipment, it should accommodate most of them. Model has tolerances, so switch does not have to be forced into it. End plate requires M2 screws, holes are…
Print standing on the face plate. Printed with ABS, but I assume PETG should be fine as well Attach the backing plate using 2mm self tapping screws .
Key Features: Increased Connector Thickness : The connector parts have been designed with increased thickness for improved stability and durability compared to the original model. Longer Screws Required : Due to the thicker connectors,…
V3 MODEL: This version now supports full height PCIe cards up to 220mm in length. Note that full height cards will extend above the 4U height by about 5-10mm (measured from the rear I/O bracket - many cards are even taller than this!). Be…
A modular, expandable 10in rack system. Can be expanded to take 19in equipment, and will also accept euro-rack modules I'm adding new features daily, so please keep checking back. If you like this model, please consider buying me a…
This is a mount to put a Unifi Gateway Max router into a mini 10in network rack. Print with the face of the mount down on the build sheet, rotated 45 degrees. Print with supports (I chose organic supports). No hardware required, unit…
Just swap this file for the one in the original design files.
10in rack mount for the Netgear GS-108 8port gigabit ethernet switch. Based on the design from @BrianBerkley. Printed face down, 2 versions are available to be used with/without M3 metallic threaded inserts. 2 screws M3x10 are required…
This was an existing design I found online but it was very small. I wanted something larger to hang on my wall but as my print bed is small I had to split the model into 4 pieces. Once printed I fixed the parts together using epoxy glue,…
Print in PETG with front facia on the bed, and with supports - Prusa Slicer Snug is the best for this. Please see the comments section for some important details discussed. The tl;dr is - the stubby leg things that protrude out the bottom…
Print standing on the face plate. Printed with ABS, but I assume PETG should be fine as well Remove the lower bracket with antennas from the devkits. Attach to the shelf using 2mm self tapping screws .
A quick Mod for the Minisforum MS-01 1U Rack Mount Kit Designed by Gear Seekers. Faceplate for 10" racks. Recommend PETG-CF for heat tolerance and rigidity.
Side panels are for the specific rack i am remixing off of. The tray fits this too. The front panels are standard 10in rack size so they will work with any 10in rack. The side panels use 10-32 rack screws. Do you like my models? Consider…
Top loading and slightly more structurally robust/rigid remix of Alex's model.
7.84inch IPS Touchscreen with DeskPi Rackmate T1. This 7.84-inch touchscreen from WisdPi fits perfectly into a 10-inch rack, boasting a resolution of 400x1280. It looks very delicate, and the IPS screen offers excellent color…
Mikrotik hEX, RD2x0GS 10inch rack mount
This is a mount for a noctua 140mm fan within a 10 inch rack. It is designed as 3.5 U with a 4U option. Just let me know if you have questions :)
Better version of the other one out there that I initially remixed and had a lot of pain with. Organic supports recommended.
This is a 10-inch rack mount plate designed specifically for the Heltec V3 ESP32 Meshtastic LoRa device . It allows you to securely mount your Meshtastic radio in a standard 10-inch rack enclosure for a clean, organized setup. Printed on…
This is a 10in rackable bracket for the Aoostar WTR Pro. The NAS rubber feet need to be removed prior to placing the NAS in the bracket! DISCLAIMER: This was designed using Tinkercad and the geometry is very imperfect. Keep this in mind…
This 1U module is designed to support the Banana Pi R4 in a 10-inch rack. It is a remix of the original model found at https://www.printables.com/model/968222-banana-pi-bpi-r4-rack-mount-module. The original model was utilized to get the…
I modified the rack side panel from the original design to be 3x as tall (6u). I also made a variant with a fan mount. You'll need a larger bed to print this. I used a 300mm voron.
10in rack mount for the Unifi Gen2 Cloud Key, with RJ45 keystone jack on faceplate, with a retention post, and centering bars on the back of the mount face. Print face down with snug supports everywhere or organic on build plate. I would…
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) I have a Ridgid R4514 Pro 10 in. Jobsite Table Saw, on which I broke the little springed sliding retaining fingers off the fence slide while removing…
print in petg, with front facia on the print bed. use supports -- prusa slicer's snug works best.
This model was inspired by Shaztech's "12 Trays HHD Enclosure, 3U Rack Mountable" however, almost everything was redesigned in order to fit my needs. This model can fit 4 3.5in HDDs, 1 SFX PSU, and a 16mm power button. I recommend…
This is designed to mount a Unifi Express Gateway to a 10in server rack. It doesn't need supports, though it will require bridging, and will be a fairly snug fit. After printing remove bridging on the back to make room for ethernet and…
Print face down with PETG or PLA. Cutouts for the inserts are 4.3mm which is what my template calls for on my printer. Takes M3 heat-set inserts on the inside of the mount. Otherwise, all the other build instructions and variations on the…
1U 10" Rack Fan Tray for 92mm Fans (Noctua NF-A9 Compatible) This is a custom-designed 1U tray for a 10" server rack. It is sized to fit a standard 92mm fan—specifically designed around the Noctua NF-A9 5V PWM , but it should work with…
Maximize the cleanliness of your workspace with this 3D-printable adapter, designed to seamlessly connect your Rigid Shop Vac hose to a Ryobi 10in. Miter Saw. This custom-designed part ensures efficient sawdust collection, keeping your…
Some Top Panels to fully close the gaps in the Modular 10inch Server Rack when using the topper and Handles. The standard is always 3mm thickness. But if you are usind the Multiboard Add-On, then you will need the wider 6mm frontpanel and…
I made this since i could find others People work that published any CAD-Files under Public-Domain I've tested it for mounting my TP-Link LS108G and TL-SG108 as well. Feel free to edit my design for other Switches as well. Please…
Replaced one hole with a slot to allow more tolerance on the pins (my wheel didn't come with pins) Models provided: R1 Hole at ø9.8 and slot and ø10 to allow for drilling/sanding to size. R1 Hole at ø10 and slot at ø10 R2 Hole at ø10 and…
The original model was pretty dimensionally inaccurate for a 10 inch rack (the space for the the Unifi Flex Mini's though were perfect) – it was way too wide. The geometries in the model were also very messy with lots of errors. I…
This is a Lionel O-Scale 10in Fastrack straight section reference that I use for making track accessories. I have also included the sketch dimensions I used if you're curious. Find more of my model train prints in this collection , many…
Modified FruitieX's model. Removed superfluous hex patterns that make it hard to print and block the SSD port. So now the SSD port accessible, and you can have the fiber face whatever direction you want instead of just one. Also enlarged…
10 inch Rack Mount for QNAP Switch Model QSW-2104-2S and QSW-1105-5T. It's a snug fit, so you have to press it in. Serverrack in the Photo is Skeleten 10" Rack, can highly recommend it's build like a brick.…
A mounting solution for Raspberry Pi 4B in a 5-inch rack / 10-inch halfrack . Requires 6 ISO 10642 countersunk M3x10 screws and fitting heat set inserts. The M2.5 screws to mount the Pi screw directly into the plastic.
This is a 2U mount for three 60mm fans for a 10 inch rack systems. The braces on the back are for reinforcement and include holes for cable management.
Had to modify Jcjames design for it to fit on the t track of a Kobolt 10in table saw.
For landscape use 2 lower pieces and 1 side.
10 by 10 inch square with 1 inch by 1 inch priamids
10 in rack for m4 mac mini and a jet kvm
Part of my wider “Pndlsm's MiniRack” series, here is a mini rack adapter (10 inch width) for tp-link 8 port switches. Design uses Hex grating of 8mm edge to edge and 2mm thickness throughout Should give a satisfying and loud click when…
This is a 10in Server Rack Project Commscope UNJ600 patch panel. I looked all over for a patch panel to fit the keystones I had on hand but none worked so I designed my own. The ports are a little tight but they work great.
10inch Rack Module RASPBERRY PI 3_4_5 Model V Work in progress: Content of this Thing can still change in the near future All trademarks, logos and brand names are the property of their respective owners
in order for the 10 inch wheel to fit, i had to mount the wheel a bit lower. but the reflector cap did not fit anymore,
This is a 1U model addition for a 10-inch mini rack. This is what i personally use to consolidate from multiple 19-inch cabinets and racks. To find that SOHO lap between clean and organised commercial cabinets and the chaos of the…
Compatibility This rack shelf if design to accommodate a network switch D-Link DGS-108 , model EGS108E C2E to be precise. The D-Link DGS-108 switch has varied over the years, your model may have a different size ! Please check carefully…
WIP - DISCLAIMER - WIP This is a work-in-progress, parts of this are unfinished, parts are currently missing, tolerances & clearances are still being worked on so parts might not fit together properly. Part orientation is not correct in…
This is a custom-designed 3D-printed rack mount built for a lightweight Kubernetes cluster using four Raspberry Pi 4s. Designed to fit perfectly in a 10-inch rack and occupying only 2U of rack space , this solution is compact, efficient,…
This is a remix of the closed shelf for the 10 inch rack project to fit a Mini PC J4125 4 eth ports. https://www.aliexpress.com/item/1005004337724378.html Printed with PETG. Print Settings Printer Brand: Creality Printer: K1 Supports: Yes…
1U mount modified for ease, speed, and quality of printing. Altered from original to better suit a dual slot GPU. This was made to better suit the Lab Rax 10in rack system, but will extend beyond the back of the standard rack depending…
Remix of some of the sidepanels to make them compatible with screws, that go through the holes all the way, like these: rackstud-m6-m8-m10-screws-and-nuts-hex-and-knurled
Super simple drawer/small shelf to use in a 10in network rack
Created to secure .710 OD poly garden tubing. Print in TPU in uploaded orientation. Holes are purposely not 100% through. Use screw with washer for best results
SKADIS Pegboard Panel for 10inch Rack Pegboard for 10-inch rack panels compatible with SKADIS accessories Using these blank panels allows you to utilize the remaining space on your 10-inch rack for various SKADIS accessories, such as…
Detachable Bahtinov mask for Meade SN 10 inches (F 1016mm, BF200). The mask is designed for a focal length of 1016 mm with a Bahtinov factor of 200. It works well with a telescope inner diameter of 297mm, where it adjusts and self-centers…
10in wrench holder for the HSW. uses smooth plug on the back so it can slide in and out easier. prints in 22 minutes
This is a simple SSD mount for 10 SSD drives, in a 2U format for a 10" rack. Printed in PETG, 30% infill (probably overkill)
Mount that allows the Hisource K0802WS Switch Hub to be mounted in a 10inch rack The height and bolt hole spacing are standard 1u spacing
Designed exclusively for the TP-Link Archer BE550 Wi-Fi 7. Converts the standalone router into a rack-mountable unit for 10-inch rack Orientation: Print in an orientation that maximizes strength along the mounting flanges.
This is inspired by others but designed from scratch. Objective was to make a frame to hold 5 x raspbery pi, two of which have 2.5in SSD storage and all powered by a POE switch. I used 10in as a size since there are commercial mini racks…
I had bought a generic 12 port 1U 19in CAT5e patch panel for my home network (from Monoprice.com), and never got around to using it, as I had previously put in a 6x wall plate for the keystone jacks in the closet with all my network gear,…
A modular drawer system based on my 10inch server rack: https://www.printables.com/model/1182834-10inch-modular-rack The drawers are 1u deep. The rack blocks are 1u tall. However, the drawers do not have to line up with the blocks, so you…
Remixed model but adds 4 keystone jacks for Front UI. Removed Steam Link logo.
This is exactly the same as the original model except I added an 18mm chamfer to the corners to allow it to fit onto the Qidi Q1 Pro build plate (245mm x 245mm). I printed this on the Q1 Pro in Elegoo ASA. The rest of the rack in the…
This is a stand for a 10inch tablet. It looks simple, but after much trial and error, I arrived at this shape. The angle of this stand fits the Japanese lifestyle. (Japanese people often do not sit on chairs in the living room. It is…
A 2U fan back panel for your home lab rack. This version fits your I3 when printing with no skirt. Had to redraw it because my PRUSA didn't understand imperial :-D. This design came from https://github.com/JaredC01/LabStack .Look him up,…
Print in PETG. In the middle a 4 channel PWM Fan Speed Controller can be installed. https://www.amazon.de/dp/B0DX5MMKYQ https://www.aliexpress.us/item/3256809630441224.html
A generic 10 inch 1U Rackmount for the Zyxel GS1200-8 i bought for my Lab Rax. Locks the switch in place without requiring screws, allowing it to be mounted in virtually any orientation. Upside-down, hanging in a rack or standard vertical…
1U 10In rack blank plate with the Araska Logo on the front of it. Made to be printed using AMS or Multi tool head printer. I used Metallic Red and matte black PETG 10% infill, gyroid
You can find here 2 holes and 3 holes versions of the holder for TP-Link TL-SG108, 8port switch. I used PETG, 0.2mm with no issues. Enjoy
cut flange to 3mm thick vs original 4mm, bolt heads may need to be ground thinner
Has space to plug it in, just had this switch on hand and needed a mount for it. Used double sided tape for it, but could definitely use the screw mounts. If you want to add these pm me/comment and I can upload the .step
Modified top Mount for Mod10 so can securely Mount a unifi ap. Tested with u6LR, I believe the pro and unifi 7 line use the same Mount but not tested myself. Will not fall off can be held upside down as shown in photo. Note: if you have a…
I bought a 10-inch touchscreen from Amazon and lost the legs that came with it…so I made my own. My screen is about .51 inches (12.75 mm) thick. The fit is tight, but the screen fits and stands as expected. I may go back and redesign for…
You will need to disassemble the Fitzbox first. Two screws are below the rubber feets, we careful not to miss them. PCB of the Fritzbox can just be put into the printed mount. I used 4 M3 heatset inserts in the corners and 4x M3x12 screws…
This 7" Display Mount for 10inch rack7" is designed in three parts so it can be printed on a 250mm wide bed. The 3 pieces have to be screwed together with screws and heat inserts.
Frame and adapter for the driver board to fit the 7.84 Inch 7.9 IPS LCD Screen Long Strip Portable Monitor 400*1280 Display Module https://de.aliexpress.com/item/1005005087157277.html The adapter can be screwed or glued to the frame.
A framework mainboard mount that has three framework module slots. The sizing makes it a bit awkward to initially install in a rack so I would suggest doing it when the rack is mostly empty, and angling it. To use the front slots you will…
USB-C Port offset 4mm
Prints with the front face down with no supports, but will need to be cut in half to fit on most 250mm print beds. Rack-mount hole spacing does not strictly match 2u spacing, but this does permit moving it up/down more freely, total usage…
Large format photography frame reducer for my 8x10 holder. I shoot wetplates and need to do some 9x12cm sometimes. My printer in only 22cm wide so I designed it in two parts. Printed in PLA 15% infill and supports.
Flush, friction-fit mount for a 10-inch 1U rack. The 2x2mm side airflow openings are fully modeled into the design. I printed with PETG on Flashforge AD5M without support. Recommended print settings: 0.20 mm or 0.25mm layer height…
