Stabilo Woody 3in1 holder
A simple holder to store the 6 Stabilo Woody pens and make them easy accessable for kids.
Wydruk około 3,77 €–4,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 69
- Polubienia
- 5
- Ocena
- 0
238 modeli
A simple holder to store the 6 Stabilo Woody pens and make them easy accessable for kids.
Wydruk około 3,77 €–4,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
English Gardena Sprinkler Mount 3in1 This mount is designed for the following Gardena Sprinklers: Classic Polo Comfort Aquazoom AquaZoom M (Other Gardena sprinklers have not been tested yet, but they might fit.) What you need: Broom…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
medium remote holder, fits 1-2 remotes, I made this because I needed one and decided to post it just cause.
Wydruk około 5,87 €–7,17 € nettoWstępna wycena jednego wariantu
🎯 Silicon PRO 3in1 è lo strumento definitivo per ogni amante del fai-da-te e per i professionisti della sigillatura! Con il suo design ergonomico a freccia e le tre punte intercambiabili, questo accessorio rende ogni lavoro di silicone…
Adapter to connect a 3" duct directly to a 4" damper or any 4" duct. Inner diameter of the large end is 100mm. Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: Any Infill: 5%…
Made some changes. The tube now holds filament roll better in place and does not require any supports and screws. The baseplate is upgraded so it's a little smaller and actually saves more space, now standard-size filament spools fit more…
Mounts to a standard 120mm fan and the other end fits inside 3 inch aluminum flexible ducting. Mount holes to fan are size M4. Print instructions Category: 3D Printer Accessories Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts:…
More options and upgrades available soon, free version includes very basic features! Free Version includes: Clean Cooler Grooved with Spout Model Features: Layered STEP files so under the objects tab you can easily color customize without…
NACA Duct to 3inch Hose Outlet Suitable for ducting airflow into a car cabin, or to brakes etc As seen here: https://www.youtube.com/watch?v=NRV6KAyzwkw
I have an updated version at the following link https://www.printables.com/model/753753-3d-printed-marching-tenors-with-attachements Small tunable drums using standard drum heads and 10-32 x 1-1/2" screws. This was modeled in Fusion 360.…
3in long french cleat .25in holes for countersunk screws or bolts. Category: Tools
Print with any material you would like. No support required. Please see image as reference for suggested orientation for printing.
Hook for your bag with three position- way to use. 1) Tension on desk board 2) Hook with small diameter (upto 3cm) 3) Hook with big diameter (upto 6cm) Tolerances depend on material you will use, like PETG si more flexible than PLA :)
What can I use it for? Handle for drawer Print the base model and a additional pole in the size you need. Filament Swatch Just print a few of the base models and use them as samples . KeyChain You will also need paracord for this. Print…
Why? Using the Core One's rear M3 142x66 bolt pattern, I lofted that profile to a simple cylinder for 3” & 4” hose. I wanted to keep it as tight as possible to the back of the Core One, and point it vertically (90deg). For those of you…
A thin comb for hair and beard 2mm thicknes(0.6 mm minimum), 20.6 cm long, 7cm wide
Credit to @Jonathanlin for including the f3d file that made this an easy first remix! I did slightly reduce the diameter on the side that connects to the Cloudline S6, the fit is very tight so make sure your printer is well calibrated. I…
My students and I are developing gridfinity shadow trays to organize the tools. Some fit better than others and most of them are setup for a 1in tool pocket depth. There will be more posted soon. Here is a tray for the M12 Cut-Off Tool…
1.3in OLED Screen case with ESP8266, used as stock ticker.
I live in Tampa, FL, and Hurricane Ian is about to rock us.. well.. Like a Hurricane. To deal with the deluge of water I made a tapered adapter to take the 4x3in downspout to a 3in flexible backwash hose for a pool (exact one here…
3in1 Silicone/Caulk Tool What are the three functions? It includes a scraper to remove the old silicone, as well as two round edges with different diameters, to smooth the new silicone once applied. Three versions There is a Mini, a…
Improved outlet cover shelf for 3in x 4.75in outlet covers. Changes: more edge bevels for better corner quality no side cutouts for less overhangs and better perimeter speed shelf legs are wide enough for full line widths instead of…
A 60mm net cup that I made for a mason jar. Could be used for hydroponics. Can be a substitute for other net cups 4-21-20 Added 3 inch and 2 inch, tested both, they are supportless Print Settings Printer: Ender 3 Pro Rafts: Doesn't Matter…
Updates: 26-Feb-2025 : V4 model Increased the size of the duct adapter significantly increased magnets holes from 4 to 9 added a 4in duct adapter requires about 7 in of clearance behind the printer (with duct attached) Requires about 200g…
I will be adding more in the future with some additional edits to existing ones. This is an expanded variety from my previous upload. I made there specifically for some tools that have clearance problems or smaller diameter size dust…
I designed it to tick all my boxes ;-) [x] Lightweight [x] Durable [x] Vibration-free (or as close as possible) [x] GPS compatible [x] Battery bottom mounted The proper tuning is ongoing and will probably be posted later on…
A vertical picture holder in the style of a film strip. Photos slide in from the top. Holds 3 2x3in photos, originally designed for the KODAK Step printer. Print all three parts separately and glue the front and back pieces together and…
Used magnets: 5mm x 1mm (6 each) The male adapter has a protruding lip in order to make a better seal against leaking gases or vocs. It's also possible to simply connect two female adapters. These are quicker and easier to print but don't…
Set of adapter to connect a 76mm (3inch) hose to a 100mm (4inch) hose. Used magnets: 5mm x 1mm (6 each) The male adapter has a protruding lip in order to make a better seal against leaking gases or vocs.
Introducing the "Fantastic Candle Holder - Pillar Edition," where elegance harmonizes with utility. Crafted with meticulous attention, this holder boasts a graceful design tailored for 3-inch pillar candles. The radiating fins,…
This is a simple filament spool holder that hangs on a closet rod, or for that matter any rod. The side locks on to the shaft via a 45 degree turn. This was designed in mind for my MMU2 unit. Allowing me to better feed filament from…
UPDATE 2: Redesigned - beefier middle part and more mounting options - ideal for fitting a RPi Can hat (HermitCrab) UPDATE 1 : I also added frame to go over the display - just use double-sided tape on the inside. I was looking for…
Revolver Holster for my Ruger LCRx 3inch Modular Spine System -> Yesss heavy influence from TREX ARMS Sidecar 2.0 The Spine System has Loops & Spaces in 0.25 inch / 6.35mm increments The “Friction Washer” is not necessary to print. The…
DISCLAIMER : Models may need adjusting, these are V1's and most likely will need some adjustments. This mount has 4 different models: 11 inch - This works with any 11 inch iPad post 2018 (not including M4) 13 inch - This works with any 13…
Very easy to make liquefied propane tank, just make 2 ends, insert 2"x4" pipe in the center to hold the two pieces together and make two tank support frames! One day I'll do a remix making it more round instead of choppy!
This is my first frame design. When I designed it my goals were : - The quietest in flight - The lowest vibration - Compatible with DJI Vista (because that what I use on all my drones) I achieved the low noice by making it the lightest…
🛑 THIS MODEL HOUSES THE INTAKE AND EXHAUST FAN. TO AVOID RECIRCULATION / BURNOUT, MAKE SURE TO DISABLE THE INTAKE FAN WHEN USING THIS. 🛑 This exhaust vent mounts to the back of the Centauri Carbon using 3 M3*8 mm bolts. The exhaust vent…
Wall mount dock for M3 Macbook Air. There is access on the bottom for all of the I/O and power connectors. Feel free to tinker: https://www.tinkercad.com/things/cSTuZ04uMKJ-13-m3-macbook-air-wall-dock
edit: I've added a version 2 which has thicker outer walls and an adjusted cover.
Updates: 7/4/2024: Fixed a minor fitment issue with the Nosecone MID section. Now at v1.2 7/5/2024: Added a forward CR for 54mm with a cutout for 13mmx3mm tubular nylon shock cord. 7/7/2024: I flew this model on its maiden flight. See…
Printed in petg for outdoor use, but other materials also suitable.
I found myself comfortable using soap bars lately, even solid shampoos, and I thought that it would be better to have a place to put my soaps near my sink and that even my shower organizer wasn’t fit to support them. So I started working…
buymeacoffee.com/dgfpv little 3d printable 3inch fpv frame. you need: 25.5x25.5 flight controller (min 15a) walksnail 1s vtx 1404 motors 3inch propellers 4x 22 or 25mm m2 stack screws (depending on your stack high) 12x 6mm m2 screws…
It takes up little space. The inner diameters are 26 mm, 22 mm, and 18 mm, so that the boilie does not get stuck. You will need an Olfa SKB-2 blade. I printed it as follows: Layer: 0.2 Filament: Bambu Lab PLA Basic With support
Update: 09/12/2005 - I have added rail buttons, just in case you needed them. Update: 11/19/2025 - trimmed off 5mm from each fin so that it might fit on smaller beds. Let me know! Update: 11/21/2025 - I pulled the Stubby fincan. It didn't…
Allows the XTool D1 enclosure vent hose to be used with the excellent Magnetic Quick-Disconnect system designed by Once in a Six Side
Hi, this is a case for the Waveshare 19399 2.13inch e-Paper Cloud Module. The case has space for the module itself as well as for a battery, which fits underneath. There are cut-outs for all buttons and ports. I have created 3d printable…
This garden light can be used as a floor, wall, or hanging light. It is approximately 40 cm high, making it a full-size fixture. It is prepared for an E27 socket. Please use only LED bulbs (otherwise, excessive heat generation is…
Fits the waveshare 4.3 in LCD with the brass hex standoffs it comes with. Still a work in progress, (I want to update the USB cover) but I have 3 built and use them everyday. Requires the following: 24 QTY--M3 brass hot melt inserts, 5mm…
Update - I added a press fit cap to plug the adapter, wont work for the flange. Update - I added a 3in angled flange now. One is 120mm to 3in flange and the other "_small" I shrunk the 120mm mounting side to save material if you aren't…
My mother is a baker and I make all kinds of cookie cutters for her. Here are some Alabama 'A' cookie cutters in two sizes (2inch and 3inch) I modeled. Would be great for fondant and probably also cookies! Be advised, PLA is food safe,…
Designed a simple pocketable box for 75 mm/3 inch angle grinder discs. It fits 9-10 discs depending on their thickness. The central post nicely secures the dics. To assemble the box, you will need 6 pcs. M2x15 screws. WARNING: If you want…
Haven't used it. its just an idea at this point. two clips/handles to hold it together while it dries. poke the wick through the bottom and tie a knot. pull taught and wrap round a 1/4 in dowel to hold the wick on top. places to put 3/8…
Includes 0.25-.5in cone spacers for larger or smaller spools
Perfect fit for E-paper display and a 18650 battery. Easy to print, no support needed.
Cap was created with handle to be used for chicken gravity feeder. Print with supports. Also was printed in PETG since it will be an outside use.
Dieser Spulenhalter ist ein Remix aus drei Modellen. Perfekt für die MMU3 die bald erscheint. Montiert kann dieser an Wand, Decke oder Boden. Gedruckt mit Prusament PETG Matte Black und Prusament PETG Orange. Perimeter 3 Infill 25%…
Modeled a quick 4 inch (100mm) to 3 inch (75mm) reduction for dryer vent hoses. Couldn't find anything on here so I created a quick model with flares on both side for ease of use. I printed it in PETG and PETG-CF and it works great for…
This is a remix of the Heygears Reflex RS RefleXtractor by @Jerry_Lee to make use of 3in/80mm diameter hoses. The model was remixed to be smaller, easier to fit on most print beds, and printable in one piece. A few fitment tweaks were…
Fancy 3inch Warhammer Combat Tool with a fantasy design. It measures 3inches, 2inches, 1inch, and 0.5inch.
Air vent tee fitting for 3 inch (76mm) flex vent tube. With Horizontal Wall Mounts (Use 3mf file to remove or adjust) 3MF included for remixing, resizing or re-orienting. *** NEW *** - Added bridge part to reduce need for supports inside…
This is a holder for a roll of 3" round stickers / labels I use for target shooting at the pistol / rifle range. I bought the roll because I was appalled at the price a popular shooting brand name wanted for each sticker (it was around…
I recently saw mention of an affordable seven colour e-paper display on HackerNews and I wanted to try one out as I have a need for a dashboard showing historical sensor readings, and each line would have its own colour. I decided on the…
I made this to work with https://www.thingiverse.com/thing:3801954 I use it for my Creality Falcon Laser Engraver vent
This is just a hanger for the 3in duct you can get off Amazon. I wanted to run my duct along my ceiling to the window and needed a way to hang it. Pretty simple, does the trick. I used .3 layer height with 10% infill to save on material…
Air Filter for Elegoo Saturn 4 Ultra 16k Resin Printer, or other models. -Summary- This 3D printable air filter is designed to fit the Elegoo Saturn 4 Ultra 16k resin printer. I don't own any other resin printers, so compatibility is up…
Mount I made to hold a 4.3in DSi WaveShare screen on the left side of my Ender 3 Pro. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 200 Infill: 35 Filament: Amazon Basics PLA Blue Category:…
for mounting GPS receiver on quadcopter drone on the nose over the FPV camera FITS: Lumenier QAV-S 2 Sub250 Joshua Bardwell SE 3in frame link HGLRC M100_Mini GPS link MATERIALS: TPU 95A (optional) M3x6 or M3x8 screws (4 each) PRINTING…
So I was looking to print a small basket to use to wash off my resin prints in a Tupperware with IPA. I only found a few models online and when I go to slice them the mesh at the bottom never wanted to come out right so I decided to…
Rafts: No Supports: No Resolution: 0.2 Walls 6 Infill: 0 PETG, or PLA
Make sure and share your makes and if you like it please give it a ❤ LIKE! I was asked to use e-ink displays from Waveshare to create reusable and customizable name badges. So I did. These are simple to print. Print them face down with…
Have you ever been holding your 3in outer diameter cylinder and thought to yourself "this cylinder would sure be better if it had a adjustable handle?" Well have I got just the STL for you! With this file you can add that spicy ergonomic…
This is a desktop stand for WaveShare 7.3 inch E-Paper . I'm using 7.3inch e-Paper HAT (F) , and most probably this works for 7.3inch e-Paper HAT (E) and 7.3inch e-Paper HAT (G) . This stand has a place to put raspberry pi zero with…
Based on my past design, the Prusa Mini z-axis mount for YI HOME CAMERA : https://www.prusaprinters.org/prints/74970-xiaomi-yi-home-google-nest-camera-mount-prusa-mini I want to upgrade the mount to hold more stuff, which is LED Keychain…
A simple case with buttons for the Waveshare ESP32-P4-WIFI6 4.3inch Development Board
Desing required #6 screws to hold together. Works with Rail Button or Missile Works Screw Switches Please Use with caution I am not liable for improper use fo these designs
No supports needed. It's a tight fit in ABS, ymmv with other filaments. There's only a single parameter that alters the attachment bolt hole size - default is for M6 bolts but you can change it in the fusion file.
I designed these 3x6 passive wall registers to add a decorative touch to any passive wall vent. I printed these in PLA and they're pretty sturdy but would only use these for passive holes that aren't exposed to heat or stress from being…
1" x 3" nametag that can be used with butterfly clutch pins to be attached to a shirt or anything else. Print Nametag Add pin to nametag Customize insert text in Bambu Studio Print Insert Clip insert into nametag Done. Details and…
Just your basic 3 in 1 Apple products support for iPhone, Watch and Airpods. I wanted a simple, elegant right hand style support with a practical and clean look.
This is a simple but dimensionally accurate model of a 3" lazy Susan bearing. The purpose of this model is to aid you in your designing process if you happen to use this style bearing and need to incorporate it into your design.
This is a scaled down version of a vent cap often used for larger 4 inch pipes. The cap prevents rain and debris entering the vent pipe without blocking the crucial venting function. The cap is designed to be attached with 4mm screws.…
More than a regular ruler! Compass to draw circles/arcs (with the help of a needle) Punch locator to be used with center-punch/pen I recommend activating ironing the topmost surface to get a nicer tool.
Can hold a single, full sticky note (standard size 3inx3in) Room to stack stuff on top Holes on the sides to grab the notes No magnet holes No supports needed
Easy to print!! ENJOY! MRC…
A bracket for mounting 3in PVC pipe. The bracket is designed to work with 1/4in bolts and nuts and 1/4in Tapcon screws (for mounting to the wall). There is also space for 1/4in washers under the bolts and screws. It should work with…
PA6-CFのフィラメントを使って製作しています。 衝撃に強いですが、ビルドする際にフレームのネジ穴をドリルで整える必要があります。 スタンドオフが別に3本必要です
Print with more walls than you think, especially on the prop guards. print with PLA to make it stiffer.
Original part: https://www.aliexpress.us/item/3256807423810495.html?spm=a2g0o.order_list.order_list_main.5.7cb11802VTdwrF&gatewayAdapt=glo2usa Feel free to copy my Onshape design to add space for a battery, mounts, etc. Please share your…
Dieses ist ein Austauschmodell des originalen TFT Rahmens um statt nur 3inch eine 4,3inch Bildschirmgröße ohne Bearbeitung oder gar Austausch der Türen beim Flying Bear Reborn2 zu bekommen. Ich habe einen günstigen Waveshare 4.3 inch DSI…
This is a cap I designed to fit atop a 2in x 3 in downspout connector. There are two files- one is for a single hydroponic tower (solid, no hole) and the other is for a tower array that feeds the tower from the top (0.72inch hole in cap).…
This is a design i've made from given informations of Mark Michael. This tool will be used by divers in florida to check, if the catched lobsters meet the size rules (3inch). Print this file in PETG or ABS for usage in saltwater and uv…
Simple adapter to directly connect a drainpipe to 3inch drainage pipe. Inner measurements of the downspout end is 60x80mm (~ 2 3/8" x 3 1/8") I suggest PETG or other outdoor-compatible material, and I printed this in a vertical…
Originally I started remaking the entire part but realized it wasn't completely necessary to do this. So instead I went and just realigned the mounting bracket holes to as much as I could. there might be some errors. Shared freecad file…
Simple part cooler for XCR3D 3in1 S1 (non-mixing) aka BigtreeTech ZSYong 3in1 hotend, attached at the heatsink with existing fan screws, uses 50x15 blower fan. Printed without support.
Those are the 3D model to go with my frame design. More info about it at https://rotorbuilds.com/build/31017#c50187 Category: R/C Vehicles
3in Spacers to widen the foot placement on the Concept2 Dynamic. Being older with wide hips, the stock foot placement is to narrow and causes hip pain. This pushes the feet 6in further apart and improves the foot, knee, hip angle. You…
Too lazy to write something. If you have questions, drop a comment.
A cute little race trainer :) TPU accessories aren't the same as the original but will work as replacements
Print in ABS 0.16mm for a nice looking external finish