Wyniki wyszukiwania: 3u

Sortowanie

212 modeli

P
PrintablesJCPhlux

Server Rack 1.3U Mounts (Cage Nut Replacement)

Server rack screw and cage nut replacement. I remixed this to for 1.3U items that fit on a standard 19" server rack. This is just the 1.3U Mount you will need the nut from Spartan's Server Rack 1U and 2U Mounts (Screw and Cage Nut…

Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
73
Polubienia
24
Ocena
0
P
PrintablesMyStoopidStuff

Gridfinity 1xY Multi Compartment Lidded Bins with Tabs Version 2.1 in 3U, 6U and 9U heights

There is an updated bin design which has latching lids available at the links below (under “Other Stuff”). The version here does not latch closed (it was never intended to have that function, and only has a tab). Update - 2/20/2026: If…

Pobrania
1693
Polubienia
772
Ocena
4,93
P
PrintablesRagingRoosevelt

3U Hard Drive Bay for 8x 3.5in HDDs for 10" Mini Rack

BOM Part Qty Image M4 Heatset src 1 src 2 12 M3 Heatset src 1 src 2 8 M4x5mm (BHCS preferred) 7 M4x10mm (BHCS or SHCS) 5 M3x10mm (BHCS preferred) 8 Jonsbo N3 Backplane src 1 (verified) src 2 src 3 src 4 I also designed a 7-drive version…

Pobrania
1436
Polubienia
548
Ocena
5
P
PrintablesB3D

19" 1U Server Rack Cover Plates. Update: 2U & 3U

UPDATE: added 2U and 3U panels, designed from scratch. (Not identical to 1U) Bottom layer is very thin, 0.6mm, to keep print times reasonable. 3 Versions: - Hex - Plain - Passthrough (Left and right part) Designed to join together with…

Pobrania
760
Polubienia
131
Ocena
5
P
Printablesjackknrsh7

19" 3U Server Rack Fan Panel

Things were getting a bit hot behind my home-lab rack, so I figured additional cooling was needed. I slammed together the geometry of 3 of @KennyVerhoeve_588554 's blanking plates in order to get the requisite size, made some holes to…

Pobrania
760
Polubienia
203
Ocena
4,67
P
PrintablesRagingRoosevelt

Seven bay NAS shelf for 10 inch mini rack, 3U

I've also designed an 8-drive version that uses a backplane. This drive rack holds seven standard SATA drives in a way that they are hot-swapable. It takes up 3U on a 10" mini rack (I used the GeeekPi one). The main body takes a while to…

Pobrania
757
Polubienia
236
Ocena
5
P
PrintablesFloKun

TP-Link ER605 3U Rackmount Adapter for 10-inch Network Cabinets

This rackmount adapter is designed to mount the TP-Link ER605 wireless router in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter…

Pobrania
536
Polubienia
61
Ocena
4
P
PrintablesPabe

1-3U 10 inch rack mount blank Panel with Voronoi Pattern

Collection of 10 inch blank Panel with Voronoi Pattern 1-3U These Models have a finer pattern than my first model with the Voronoi pattern Print as you like, these models are not for structural integrity.

Pobrania
484
Polubienia
99
Ocena
4,67
P
PrintablesFloKun

TP-Link TL-SG1008P 3U Rackmount Adapter for 10-inch Network Cabinets

This rackmount adapter is designed to mount the TP-Link TL-SG1008P switch in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…

Pobrania
416
Polubienia
41
Ocena
5
P
PrintablesMartinRowan

3U Modular Rack for ZimaBoard, Raspberry Pi, SSD, HDD, PCI cards and more

Please note this design should be considered a BETA , I'm still making some tweaks for the following: Improve all hangers to make latching less stiff Improvements to PCIe hanger. Modular 3U Rackmount for ZimaBoards , to be co-located with…

Pobrania
408
Polubienia
98
Ocena
4
P
Printablesloopj

Motorola MB8611 / MB8600 / MB7621 Cable Modem Rack Mount 1.3U

1.3U rack mount for the Motorola MB8611 / MB8600 / MB7621 cable modem, with ventilated shelf and keystone jack. Also has a screw mount hole to mount the modem directly to the modem tray. You must remove the base/stand of the modem in…

Pobrania
388
Polubienia
32
Ocena
4,8
P
Printablesjonnybergdahl

3U Rack Mount

This is brackets for mounting rack mounting network equipment on a shelf. It is designed for 3U height, so can take 3 1U devices. I included the Fusion 360 design files for easy remixing.

Pobrania
377
Polubienia
42
Ocena
5
P
Printablesbutchooka

10" Inch Network Rack (3U+4U+5U), Standard Dimensions, almost full printable

##English## Here is my almost completely printable 10 inch rack from 3U-5U. All parts fit for the P1/X1 Bambu printers, 6U would not fit anymore - and here I would go for a finished rack for stability. PLA or PETG works, the example with…

Pobrania
367
Polubienia
69
Ocena
0
P
Printablesmseidler

Intel NUC 10 inch 3U rack mount

Rack mount for 3 Intel NUCs into a 10 inch rack. It consumes 3 height units and can hold 3 Intel NUC. Slide ins are availabe for: - NUC 10 tall - NUC 10 small - NUC 13 tall Should be printed in PETG. Additonal parts needed M3 screws and…

Pobrania
365
Polubienia
38
Ocena
4,67
P
PrintablesHippo

3U 19" Server rack VESA 100 monitor mount

Description I had a 24" monitor sitting idle and, as it happens, a 42U server rack at home. (Yes, not exactly standard apartment furniture, but here we are.) The idea struck: hang the monitor inside the server rack. This design came to…

Pobrania
346
Polubienia
84
Ocena
5
P
PrintablesChris K.

Gridfinity 2x1x3u Battery Holder CR2032

UPDATE 2025/01/19: It seems my model got messed up prior to uploading to Printables. I have uploaded now a fixed model with a battery gap of 3.75mm (on paper, which is the loose fit) and will also recreate the tight fit model (3.45mm…

Pobrania
334
Polubienia
14
Ocena
5
P
PrintablesMarsDropper

Gridfinity Lamy Safari Horizontal Fountain Pen Holder 1x4 3U

Fits on Prusa Mini Nozzle: 0.4mm Material: PLA, anyone works Print: 0.2mm Perimeters: 3 Support: Not required Brim: Not required Infill: 15-30% Fill pattern: Gyroid (This is important in gridfinity pieces with magnet holes)

Pobrania
306
Polubienia
72
Ocena
4,83
P
PrintablesCelahir

Horizontal dremel bit holder: gridfinity 2x2x3U

Stackable dremel / proxxon horizontal bit holder for gridfinity system 2x2x3U. Maximum bit head diameter: 14 mm. The clearance depends on your printer calibration, but the parts were designed in two variants: D3.5 - snug fit for the…

Pobrania
267
Polubienia
61
Ocena
5
P

2U (3U) Raspberry Pi mount for 19" rack

2U (3U) Raspberry Pi mount for 19" rack A rack mount for up to 12 Raspberry Pis. 2U if the Raspberry Pis are powered via the GPIO pins. 3U if powered via USB (Due to the cables sticking out). Heavily inspired from this design , but…

Pobrania
263
Polubienia
60
Ocena
4,5
P
PrintablesAcoustic Lemur

3U Eurorack Side Bracket

Test model included to check fitting, just make sure you print whole bracket on same orientation and setting as test print. Final print should have supports enabled. You will need two M5 screws to secure bracket to rails. If you need to…

Pobrania
257
Polubienia
36
Ocena
0
P
PrintablesPaul Grove

Honeycomb Storage Wall (HSW) 3U 10 inch Rack

Honeycomb Storage Wall in a 3U panel for 10" inch network/server rack.

Pobrania
247
Polubienia
53
Ocena
0
P
PrintablesFloKun

TP-Link OC200 3U Rackmount Adapter for 10-inch Network Cabinets

This rackmount adapter is designed to mount the TP-Link OC200 controller in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…

Pobrania
238
Polubienia
18
Ocena
5
P
PrintablesAquaMorph

Eurorack 3U to 1U Adapter for Intellijel

I currently do not own any 1U modules but I would like to get the most out of my Intellijel 4U Palette case so I created the 3U to 1U Adapter for Intellijel. This adapter converts regular 3U eurorack modules to Intellijel’s 1U module spec…

Pobrania
235
Polubienia
16
Ocena
5
P
PrintablesJoshua

Router TV Mount (Vesa) Asus RT-AX53U

Elevate your router for better signal and stability. Single screw fitting. Should be comparable with most screw sizes, use washer to ensure a secure fit. Designed for Asus RT-AX53U router however should fit any router with 84mm - 85mm…

Pobrania
197
Polubienia
23
Ocena
5
P
Printablesdrew.brashler

19.5 Inch Rack Ears (1U, 2U, 3U, 4U)

Printable rack ears with #10-32 tapped holes for 1U, 2U, 3U and 4U sizes to mount rack gear together outside of an enclosure. Also includes files for 1U, 2U and 3U with a leg to lift up the front of the piece of gear. I have a lot of…

Pobrania
190
Polubienia
47
Ocena
5
P
PrintablesCyril

19" 3U Rack for Starlink Router V3 + 3 Moduler trays

For link the 2 parts use a hot gun is more easy

Pobrania
178
Polubienia
15
Ocena
0
P
PrintablesNordicWalker

Gridfinity 1x2x3U Bic lighter Bin

A simple 1x2x3U Gridfinity Bic lighter bin. this holds the lighter in a flat position. This was designed to be used in a storage box. The bin sits snug around the lighter so it doesn't move to much during transport.

Pobrania
176
Polubienia
34
Ocena
4,29
P
PrintablesV-XL.art

Eurorack Blank Panel │3U – 2 to 20 HP │ "Circuit Chaos"

EURORACK Blank Panel │3U – From 2 to 20 HP │ "Circuit Chaos" Best to print with a 0.4mm nozzle, layer height 0.2mm or smaller. The “circuit chaos” is made of 0.5 and 1mm pipes so technically it is possible to do 2 colour changes, I think…

Pobrania
173
Polubienia
22
Ocena
5
P
PrintablesWollensokje

8-Bay 10 inch 3U Serverrack Mount for 3.5" HDD - Lab Rax

Designed to fit the Lab Rax or any 10" serverrack with 240mm depth: https://makerworld.com/en/models/1294480-lab-rax-10-server-rack-5u?from=search#profileId-1325352 Parts: M6x10mm button head screws M6 brass inserts (8mm OD, 4mm length)…

Pobrania
165
Polubienia
39
Ocena
0
P
PrintablesTraincrossin

Eurorack 1U and 3U Side Bracket (Intellijel Format)

Making your own eurorack case? Then you might want a 1U row! Modeled this bracket based on the Intellijel 3U Z-Rail brackets so it's sized to work with M4 screws. Holes are countersunk as well for a nice flush mount. Attach the bracket to…

Pobrania
156
Polubienia
17
Ocena
5
P
Printablesdvanderspoel

10" Server Rack 3U Shelf and Plate for Synology DS215j NAS

A simple shelf and plate for the Synology DS215j NAS to fit into a 10" Mini Rack. The size of the opening for the NAS is 101mm x 161mm - this may work for other similar sized NAS units but no guarantees. Smaller printers like the Ender 3…

Pobrania
151
Polubienia
18
Ocena
0
P
PrintablesNeil Norton

19" 3U Server Rack Fan Panel Remix Straight Edges

I liked the 3u fan panel that @jackknrsh7_319691 created, but I wanted to make it with clean straight lines to match the rest of my printed panels.

Pobrania
146
Polubienia
25
Ocena
5
P
PrintablesChris K.

Gridfinity 2x1x3u Battery Holder AAA

When empty, another 1x1 or 2x1 Gridfinity entity can be stacked on top.

Pobrania
125
Polubienia
11
Ocena
5
P
PrintablesTheProjectWheel

Gridfinity Bins for Bambu Lab Parts - 3U Height

Please comment, rate, and post a make! Be sure to check out my other models! I have my Bambu X1Cs on this 46" adjustable height Husky workbench which has a weirdly shallow top drawer. I modeled these bins along with this base to fit into…

Pobrania
124
Polubienia
23
Ocena
5
P
PrintablesMRP

3U side panel for mounting 12cm Fan (Galaxy Cluster Addon)

This is addon for my 3D printed Galaxy Cluster rack. 3D Printed Galaxy Rack: https://www.printables.com/model/1173672-10-mini-rack-all-3d-print Print settings: 0.28 PETG

Pobrania
124
Polubienia
21
Ocena
5
P
PrintablesDominik

MikroTik routerboard L23UGSR-5HaxD2HaxD box

A box I designed for L23UGSR-5HaxD2HaxD Routerboard. Has 1 open side for air ventilation. Uses M3 bolt to hold the board (M3x6-M3x14) will work. Has mounting points on the backside, which use M4 screws with max ~7mm diameter of the head.…

Pobrania
123
Polubienia
9
Ocena
5
P
PrintablesHydrohs

3U 10" Dual Slot Mini ITX Mount

I wanted to mount an ITX board with two PCIe cards in my 10" rack, but wasn't able to find anything that allowed this specifically. Using heron's excellent model as a base I adapted it to suit this purpose. Using a PCIe extension cable…

Pobrania
122
Polubienia
34
Ocena
0
P
Printablesstuckpixel

1U to 3U Eurorack Format Changer

I'm making the jump from my intellijel palette to a conventional 3U eurorack case, but still had a few 1U modules I wanted to use. This model can accept threaded inserts, or square nuts, and ranges from 6HP to 40HP (actual width consumed…

Pobrania
117
Polubienia
20
Ocena
0
P
PrintablesPavel Veselý

HT-203U macro lens 20mm

Macro lens holder for thermal camera Hti HT-203U ZnSe 20mm diameter Focal lenght 50,8mm Focus distance 5cm PETG

Pobrania
113
Polubienia
9
Ocena
5
P
PrintablesGreg

Gridfinity 3x1x3u 5x 100mm (~4") Bit Bin w/PFM Stackable

Gridfinity 3x1x3u bin with dividers for 5x 100mm (~4") bits with press fit magnet holes (PFM) This design fits 5x 100mm bits, is stackable, and has press fit magnets (PFM) It is recommended the outside corner magnet holes be used to limit…

Pobrania
108
Polubienia
16
Ocena
5
P
PrintablesNamoshek

Large (4x) Rack Frame for 2U (3U) Raspberry Pi mount for 19" rack

Large (4x) Rack Frame for 2U (3U) Raspberry Pi mount for 19" rack This is just a larger rack frame for the original model by @ichwillkeinenacc. The larger rack frame is very handy to store network switches, power supplies and other stuff…

Pobrania
105
Polubienia
22
Ocena
0
P
PrintablesAlwaysTinkering

Kit Card Tree Parts, Instructions and 3UDC Pivot mounts

Welcome to the Kit Card Tree Library with the 3UDC pivot mount and information on how to build a display for your kit card or anything else you opt to attach. This project uses parts from several different projects. You will print the…

Pobrania
104
Polubienia
29
Ocena
0
P
PrintablesNobi-7212

Minisforum MS-01 1-1/3U Rack (10 inch)

Couldn't find a Rack shelf for the MS-01 that fits in a 10" server rack so created my own. Prints vertically, and can fit small printers. My bed is 220x220x250 (K1 SE). As you install the MS-01 it is a tight fit as I didn't want it to…

Pobrania
99
Polubienia
9
Ocena
0
P
PrintablesDaniel S

Gridfinity Battery Bins 1x1 3u 12xAAA 6xAA

Gridfinity Battery bin, can store 12 AAA and 6 AA Batteries! Switch colour at Layer 104 if you want to colour code Created with kennetek's awesome openSCAD remodel https://github.com/kennetek/gridfinity-rebuilt-openscad Gridfinity by Zack…

Pobrania
97
Polubienia
10
Ocena
0
P
PrintablesMatt Topper

2/3u and 1.5u Cable Management for 10" Racks

The back of my 10" racks are notoriously messy. I built these to be installed facing inward from the back and help keep the cables tidy.

Pobrania
96
Polubienia
7
Ocena
0
P
Printablesmultifunk

Ikea Lack 3U Rack-rail

3U rack rail for Ikea Lack table. Intended to be used with M5 nuts (press fitted to the backside) and M5 bolts for mounting.

Pobrania
95
Polubienia
26
Ocena
0
P
PrintablesCyril

19" 2U - 3U - 4U Rack for Moduler trays + Trays

Here's a lot of news versions of the Raspberry Pi Rack. 2U - For Modules 2 or 3 blocks 3U - For Starlink Router 3U - For Modules 4U - For Lacie HardDrive A lot of Tray You can combine it like you want (2U whith 1U, 4U whith 1U, 3U whith…

Pobrania
87
Polubienia
15
Ocena
4
P
Printablesprobain

Supermicro 836 3U Server - External Front Fan mount & shroud for 3x140mm Fans

I wanted to push more air into my SuperMicro 836 server. I modeled this so I can have 3x140mm fans pushing air inwards, through the HDD-drive cages. It is a push fit onto the case, and is kept in place by the side screw of the case it…

Pobrania
85
Polubienia
13
Ocena
0

Gridfinity Rugged Box - Ultra Low-Profile Latch, 3u bottom

Super low-profile latch, intended for boxes with >= 3u bottoms. Print it with a brim. No supports needed. The mesh is a bit scuffed, but it prints fine.

Pobrania
84
Polubienia
18
Ocena
0
P
PrintablesPabe

10 inch rack ventilation panel 3u

A 3u blank panel for your 10 inch homelab. Voronoi Pattern I have created also a model with a denser pattern and in the dimensions in 1U 2U & 3U, just see my other models.

Pobrania
83
Polubienia
30
Ocena
0
P
PrintablesRobert S.

2/3u 10" Rack Netgear Holder (GS308E,GS108E)

If your 10-inch network cabinet is full to bursting with technology, this holder will save you some ⅓ U space. It can be supplemented with 4 M3 inserts on the sides so that you can additionally fix the switch to the side with M3 10mm…

Pobrania
82
Polubienia
8
Ocena
0
P
PrintablesAndreas

3U Frame

3U Frame Three simple U's which are interlocked can form an interesting puzzle cage. The challenge is to accommodates four hexacubes forming a 3x3x3 cube where the holes are not visible. Beware for this level 15 puzzle with only two…

Pobrania
82
Polubienia
6
Ocena
3
P
PrintablesJace

Slim 3U Eurorack 19" Rack Ears for Synthrotek Rails / Standalone Open Frame

When moving some Eurorack gear into a 19" server style rack, I noticed the 84hp frames that were supposed to fit left ~4hp in wasted space on the sides. So I bought some 104hp Synthrotek rails and cut them down to 17 ⅝" (88hp) to give…

Pobrania
79
Polubienia
17
Ocena
5
P
PrintablesNiH

3U 6x 3.5" SATA hdd cage for 10" rack

3U cage for 6x SATA 3.5" hdd mounted vertically using sleds (dell style) for a 10" rack. I've designed the bay's for this model of sled ( https://www.amazon.se/dp/B07929WYSR?ref=ppx_yo2ov_dt_b_fed_asin_title ). You will probably have to…

Pobrania
78
Polubienia
12
Ocena
0
P
PrintablesPatrick Friedel

Intel NUC 10 inch 3U rack mount

I know it fits the tall NUC 8th generation, and I'm pretty sure that works with all tall models of the same general design. The remixed files are the “Slide In NUC Rack” files - the other STLs are mseidler's original creations that I'm…

Pobrania
73
Polubienia
11
Ocena
0
P
PrintablesGreg

Gridfinity 2x1x3u 5x 65mm (~2.5") Bit Bin w/PFM Stackable

Gridfinity 2x1x3u bin with dividers for 5x 65mm (~2.5") bits with press fit magnet holes (PFM) This design fits 5x 65mm bits, is stackable, and has press fit magnets (PFM) It is recommended the outside corner magnet holes be used to limit…

Pobrania
73
Polubienia
17
Ocena
5
P
PrintablesFSOCIETY

3x Atomizer / Vape Stand 1x2x3U Gridfinity

A 3x Atomizer / Vape Stand 1x2x3U for Gridfinity

Pobrania
73
Polubienia
10
Ocena
5
P
Printablescrashkg

Gridfinity Divider for 5U, 4U, 3U, and 2U

5U and 4U takes just the single piece. The 3 U requires 2 triangular shaped pieces on either side of the rectangle.

Pobrania
72
Polubienia
27
Ocena
5
P
PrintablesSolusViator441

Gridfinity Simple 1/4 Inch Socket Wrench Holder 1x1x3u

Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1x1x3u Gridfinity Universal Holder for ¼ in Socket Wrench * Any/All ¼ Inch Drive Sockets should fit so…

Pobrania
71
Polubienia
15
Ocena
5
P
PrintablesKonrad Jelen

Standard Rack 1U 2U 3U 4U Spacer + DXF Template

This is a standard 1U 2U 3U 4U spacer for your rackmount hardware. Additionally there is a dedicated Silverstone RM44 enclosure spacer made specifically for this model. I have thrown also a DXF template file for you to make this thing of…

Pobrania
70
Polubienia
4
Ocena
0
P
PrintablesMixmeister

10-inch 3U Rack Mount Blanks

10-inch 3U Rack Mount Blanks. 6 versions 1. 3U Rack Mount Blank 2. 3U Rack Mount Blank Reinforced 3. 3U Rack Mount Blank Vented 4. 3U Rack Mount Blank Vented Reinforced 5. 3U Rack Mount Blank Vented Long Grills 6. 3U Rack Mount Blank…

Pobrania
69
Polubienia
10
Ocena
0
P
PrintablesDror Avrahami

Gridfinity tap M3-M10 set holder 1x3x3u

Just a simple gridfinity 1x3x3u to store a tap set. This is the set I have

Pobrania
69
Polubienia
10
Ocena
5
P
PrintablesChris K.

Gridfinity 2x1x3u Battery Holder 9V Block & AAA

Once all my other batteries where sorted, what to do with the clunky 9v blocks? and on top, for my few remotes, i do need some spare AAA batteries stored. Lets use the free space of a 4x 9v Block Gridfinity box and store some additional…

Pobrania
65
Polubienia
6
Ocena
0
P
Printablesnotaseraf

3U Spacebar for Darmoshark SK16 Macropad

Tried to find a 3u spacebar model to modify my Darmoshark SK16 macropad and couldn't find any, so I modeled and printed this myself. Might fit other keyboards that need a 3u spacebar too, but I don't have one on hand to test. Printed on a…

Pobrania
64
Polubienia
4
Ocena
0
P
PrintablesNordicWalker

Gridfinity 1x4x3U Microsoft Surface Pen Case

I Introduce to you the Microsoft Surface Gridfinity pen case. The case fits snugly around you're pen so it doesn't wobble around. I'ts secured in place with 2 6x2 magnets placed where the magnets inside the pen are. So the pen doesn't…

Pobrania
64
Polubienia
32
Ocena
5
P
PrintablesKos Kos

Macro lens for thermal camera HT-203U-i

Макро лінза для тепловізора HT-203U-i Macro lens for thermal camera HT-203U-i Lens - https://www.aliexpress.com/item/1005004054521261.html P/N:CNFL02D20F50 China PVD Focusing Lens Size:20mmDia*2.2mmET Focal length:50.8mm Coating:AR/AR @…

Pobrania
63
Polubienia
9
Ocena
0
P
PrintablesNuIIPointer

Gardena pipe routing | rebuild 13 mm 3UDS 8328-20

https://www.thingiverse.com/thing:4441076 presented a gardena tool. No supports needed. Tested print on resin printer. should also work on PLA... Print Settings Rafts: Yes Supports: Yes Resolution: 200 Infill: 20 Filament: Elegoo Resin…

Pobrania
62
Polubienia
10
Ocena
0
P
PrintablesYurbann

Legs for the LG 43UN70006 TV

Legs for the LG 43UN70006 TV. They may also be suitable for other models with similar mounts.

Pobrania
60
Polubienia
3
Ocena
0
P
PrintablesChris K.

Gridfinity 2x1x3u Battery Holder for AA Batteries

I needed storage solution for tons of AA rechargable batteries to be organized. I opted for a design to easy pull the batteries over being able to stack batteries on top of each other, as it would contradict my drawer philosophy to have…

Pobrania
60
Polubienia
5
Ocena
0
P
PrintablesChris K.

Gridfinity 1x1x3u Battery Holder CR2450

While I was at designing trays for my batteries, I realized that I wanted non-touching stackable trays for my CR-based batteries. I do not have an extensive need for many CR2450s but I need a few, so a 1x1 by 3u high tray was the deal for…

Pobrania
58
Polubienia
4
Ocena
5
P
PrintablesPol

M4 Mac Mini 10 Inch Rack 1U Front (1.3U Rear)

Reduces height of the front to only take up 1U of space (45mm). From there it gradually expands to the original height (52mm). For this reason, whatever you place below it in your rack should have at least 10 mm of headroom to account for…

Pobrania
57
Polubienia
9
Ocena
4
P
PrintablesCasualSAB

2.5" to 3.5" SSD Adapter w/ Sleds for 3u 8x Hard Drive Bay

This remix allows you to utilize 2.5" SSDs in the 8 bay setup by RagingRoosevelt. With this, you only need 3 M3 x 6mm screws to secure each drive, which shouldn't be an issue for SSDs. Holes are large enough to allow LTT screwdriver to…

Pobrania
57
Polubienia
15
Ocena
0
P
PrintablesVincent

3U split body hard drive bay

This is a remix that splits the body of the 3U 8 bay hard driver holder allowing to be printed on smaller build plates i printed this on a Bambulab a1 mini just fine the model does need supports for the two halves but support is minimal.…

Pobrania
56
Polubienia
8
Ocena
0
P
Printablesdyn1x

10" Rack RGB Strip (1/3U)

Parts list: 2 x M3x12mm screw 2 x M3 threaded insert LED-strip (I used these: https://www.aliexpress.com/item/32476317187.html?spm=a2g0o.order_list.order_list_main.269.b6e918020R6Yfx ) Diffuser sheet (I used these:…

Pobrania
55
Polubienia
15
Ocena
0
P
Printablesfmriguy

Motorola MB8611 / MB8600 / MB7621 Cable Modem Rack Mount 1.3U - 10” Rack Edition

This mount will allow you to attach a Motorola cable modem (models MB8611 / MB8600 / MB7621) horizontally and store in a 10-inch networking rack. Unscrew the base from the modem, lay on its side and attach screws through the side of the…

Pobrania
55
Polubienia
5
Ocena
0
P
Printablesspm3x.com

Standard 10 HP 3U Eurorack Module SP1H10 for the SP1 Modular Eurorack Case

50.8mm standard Eurorack Module with a horizontal pitch of 10 HP (1 HP=5.08 mm). The module can be combined by assembling the modules with threaded strips. Free STL file downloads for other modules available under…

Pobrania
54
Polubienia
19
Ocena
0
P
PrintablesJacky Li

Portable Screen 7 inch_IPS 1024x600@60Hz Display mount - 3U

I made a simple panel for mounting a 7-inch screen on my Rackmate T2 case, at least it can hold my screen now. There will be minor modifications later, hope everyone likes it. Change Logs: V2.0 adding FPC slot, adding more space for…

Pobrania
53
Polubienia
11
Ocena
0
P
Printablessamywamy10

Pinecil Gridfinity holder - 5x1 (3U tall) - Soldering iron, wire + flux

Created this Gridfinity 5x1 (3U tall) holder for the Pine64 Pinecil Soldering Iron , plus 2x flux and a tube of wire.

Pobrania
51
Polubienia
12
Ocena
4

Eurorack Blank Tile - 3U 1Hp

This is a blank tile for Eurorack, 3U 1Hp

Pobrania
48
Polubienia
1
Ocena
0
P
PrintablesTeripper

~3u Spacebar Keycap for Low Profile Kailh Choc V1

I expanded the 2u keycap to around 3u, along with the necessary adjustments to the stabilizers and choc pins, so it would fit in the Chosfox L75 3u spacebar slots. Printed at .1mm on a .25mm nozzle on my Prusa Mini and it slots into the…

Pobrania
47
Polubienia
4
Ocena
0
P
PrintablesWeidemaz

3U Side panel, blank

A simple correction/remix to Natalie T's fantastic 10" server rack. 3U side panel was not blank, but the same 3U for mounting a 120mm fan, thus this quick remix.

Pobrania
46
Polubienia
8
Ocena
0
P
Printablessamywamy10

Gridfinity Wire Cutter Holder 4x2 (3U height) stackable

A stackable Gridfinity holder in 4x2 size (3U height). Holds my wire cutters (sorry not sure the brand). It's a bit thin at the bottom of the holding part but works fine.

Pobrania
46
Polubienia
13
Ocena
0
P
PrintablesAlwaysTinkering

3UDC Display Clip Accessories

3UDC refers to the profile of the display clip and socket system. Anything with 3UDC should fit together. In this system tolerances are built into the socket so that you can expect anything people design to fit. The 3UDC clips have 4…

Pobrania
45
Polubienia
7
Ocena
0
P
PrintablesSergii

3U side panels with plain ribs

Reworked the 3U side panel with 120mm for Natalie T 10" server rack. Plain ribs, more holes + plain panel

Pobrania
45
Polubienia
9
Ocena
0

Eurorack Blank Tile - 3U 2Hp

This is a blank tile for Eurorack, 3U 2Hp

Pobrania
43
Polubienia
3
Ocena
0
P
PrintablesAlwaysTinkering

3UDC and 156DT Developers Library for Clips and Display Tree

Welcome to the Developers library for the 3UDC clip system and the 156DTmm display tree. Both of these systems involves lots of components and I wanted to put parts and information needed to create things in a non-end user library. These…

Pobrania
42
Polubienia
4
Ocena
0
P
PrintablesChris K.

Gridfinity 2x1x3u Battery Holder CR2016

I did not like the much more space saving designs which stack batteries because of them touching each other. Hence here comes yet another battery holder for CR2016 in a 2 by 1 by 3 units high bin. It can hold up to 30x CR2016 batteries.…

Pobrania
41
Polubienia
3
Ocena
0
P
Printablesmhwlng

2.3U 19 inch rack front panel mount for 12.6" 1920x515 ultra-wide touch screen

2.3U 19 inch rack front panel mount for 12.6" 1920x515 ultra-wide touch screen I used this display: https://www.aliexpress.com/item/1005001966967133.html (with touch) Print the two halves of the front panel mount / two clamps on the…

Pobrania
41
Polubienia
6
Ocena
0
P
PrintablesOriginalPrints

Fanvil X3U Wall Mount

A cheaper alternative to the phone mounts available for purchase. Included is a hole jig in addition to the mounts for easier aligning of screws.

Pobrania
41
Polubienia
4
Ocena
0
P
PrintablesJoshua Falconer

Fanvil X3U Phone bracket.

This wall mount is for a Fanvil X3U VOIP phone. Designed using a base model that was designed by Kyle Campbell. Worked off that model to make the slanted back and hole for Ethernet wire. I found that the best way to print this is to place…

Pobrania
39
Polubienia
1
Ocena
0
P
PrintablesNotapicle

blank 10 inch rack 3u plate fits core one

blank 3u plate for 10 inch rack to build your own models off of. its designed to fit inside the core one build plate

Pobrania
39
Polubienia
5
Ocena
0
P
PrintablesVitrah X Adrian

10" Dual TP-Link 8-Port Switch 1.3U Rack Mount

1.3U rack mount for 8-port TP-Link switches such as TL-SG108E, TL-SG108PE, and others. No supports needed when printed standing on the front side.

Pobrania
38
Polubienia
5
Ocena
0
P
PrintablesSponge

2/3U Ventilation Panel for 10" Rack

This is a 2/3U height Ventilation Panel for 10" Rack Category: Electronics

Pobrania
38
Polubienia
2
Ocena
0
P
PrintablesBram

Soocas X3U Case

Created a simple carrying/travel case for my Soocas X3U toothbrush body + 1 brush.

Pobrania
38
Polubienia
2
Ocena
0
P
Printablestimobp

3U table holder - data video screen holder

Right and left parts to set up a video data monitor on the table.

Pobrania
38
Polubienia
5
Ocena
0
P
PrintablesBeefdip

3U Eurorack

This is an implementation of a eurorack enclosure using things from the hardware store. It's the base for my raspberry pi eurorack system. I've made no provisions for power though there are options in the group I'm going to create and…

Pobrania
37
Polubienia
11
Ocena
0
P
PrintablesBlake

Fanvil X3U Phone Stand Bracket

This is a replacement phone stand for a Fanvil X3U phone. This stand may also work on similar Fanvil models. If you do try it on a different model please let me know if it works or doesn't and I can update the description. It is modeled…

Pobrania
33
Polubienia
4
Ocena
0
P
PrintablesMixmeister

19-inch 3U Rack Mount Blanks

19-inch 3U Rack Mount Blanks. 6 versions 1. 3U Rack Mount Blank 2. 3U Rack Mount Blank Reinforced 3. 3U Rack Mount Blank Vented 4. 3U Rack Mount Blank Vented Reinforced 5. 3U Rack Mount Blank Vented Long Grills 6. 3U Rack Mount Blank…

Pobrania
32
Polubienia
5
Ocena
0
P
PrintablesSarge955

3U 120mm Fan Panel with 2 fan controllers

BOM: Printed Parts: 1x Panel Right 1x Panel Left 2x Controller Bracket 1x Junction Box Base (Optional) 1x Junction Box Lid (Optional) 8x TPU Vibration Dampener 2x Hex-Fan-Cover-120mm (Optional) Electric Parts: 2x 120mm x 25mm fan 2x 3V…

Pobrania
32
Polubienia
5
Ocena
0
P
PrintablesGameCounter

120mm Fan Wall Replacement - Super Micro 3U Chassis

If you have a Super Micro 3U case, SC836 or similar, you can destroy the existing metal fan wall and insert this to have 2 120mm fans instead of the stock fans. Useful if you have a want to fit a 120mm or 240mm radiator into the case, or…

Pobrania
31
Polubienia
4
Ocena
0