111 modeli
Halterung, um die Panasonic Munddusche ohne zu bohren mit Silikon an einer Fliese zu befestigen.
Wydruk około 2,87 €–3,50 € nettoWstępna wycena jednego wariantu
The photo shows the original doorbell and base plate. The hooks of the base plate get easily broken off when replacing the battery. As a 3d model, this base plate is difficult to print in one complete part. Therefore I made it in 3 parts:…
M.2 SSD mounting plate for DELL laptops.
Comb for Phillips QC5115 hair clipper
This model is compatible with the lego system.
I designed this mount so that I could hang a Dell AC511 soundbar from the VESA mount on the back of the Dell U4021QW ultrawide LCD monitor. This mount won't work with the Dell monitor stand. See my other models for a version of the mount…
A Dell AC511 soundbar mount for Dell P2719H monitor. This will only work if you have the monitor mounted on a non-stock VESA mount since it utilizes the two bottom VESA mounts for securing. I designed the parts to be printed flat on the…
A friend asked me if I would make an extended version of the comb for PHILIPS QC5115. So I made one ;). This model allows to adjust height from 25mm to 40mm. I used a screw to secure the height, which seems like a good solution for 3d…
Better to print with PETG 99% infill for the blades. and 40%+ infill for the main body. Print the items separately better.
DELL ac511 soundbar mount. DELL ac511 držiak na zvukovú lištu
This model is compatible with the lego system.
This is the actual Fusion360 file. it has: 1. The AXIS aluminum mast modelled (my own) 2. The Flipsky 65111 motor modelled (my own) 3. The folding propeller (propeller from another design, the propeller holder my own model)
This is a VESA mount for the Dell AC511 soundbar, intended to be used with the Dell P2219H LCD monitor. The adapter was inspired by sunny_raven's design but is a complete redesign from scratch made to fit the smaller Dell monitor. This…
This mount allows you to mount a Dell AC511 soundbar to the stand that comes with the Dell 4021QW ultrawide monitor. The mount consists of two parts. The first part snaps into the cord hole in the monitor stand, and the soundbar snaps to…
I decided to buy a Dell Soundbar because it looked perfect for my desktop setup. I found out they're only supposed to clip onto Dell monitors. I've got an HP monitor. (Specific model for width checking: HP Pavilion 23xi) 3D printing to…
A semi-accurate model of the Nokia 5110 LCD Module. Useful for creating enclosures. Category: DIY
Instructions: Print 2 of the T-pieces, super glue at the spacing needed to fit in the mounting holes
battery holder for 4x Canon BP-511
3D model of the rear bumper tow hook cover for Renault Megane III . This model replicates the OEM part with number 511650005R . The model was designed from scratch based on the original part geometry and bumper mounting shape. It can be…
Needed this after removing the useless “Smartphone Integration” from my 2015 428i. This apparently fits many models and years. I originally intended to print this in TPU but my nozzle clogged mid-print. So went with PETG. The fit is…
Radio Support Bracket for E30 to support the radio from the rear. Part number: 65111370841 Only tested on my US model 1990 325i left hand drive with CM5908 radio. Best to print sideways like in picture with organic (tree) supports. Source…
Laser engraved transit card for Commodore 1541 floppy disk drive. The Corel Draw (.cdr) file contains the data needed to laser cut the card. Dimensions were drawn in Solidworks based on…
He modificado mi anterior diseño de portabatería para LP-E6 y ahora subo un pequeño rediseño para la batería BP-511 de Canon. Como en el anterior sistema el desbloqueo y la expulsión de la batería es simplemente pulsando el botón lateral…
This little project displays the current humidity and temperature on a 5110-"Nokia" LCD. Additionally it records the temperature of the last 60 seconds, minutes and hours. Based on this data, a graph is drawn onto the lower half of the…
I remixed the original model by jruutiai from Thingiverse: Made it slightly narrower and the tabs wider to better stay on my batteries. Added status indicator for E mpty or F ull. The battery has a little triangle (arrow) on top. Point…
This is a model of the rear sway bar bushing for some older VW AUDI cars. PLEASE use the correct materials if you plan on using this in the real world and use at your own risk. Complete proper testing to confirm that it will work for your…
E30 (and many other chassis) plastic grommet used in the front grill installation and rear license plate.
Note: This stand requires the original mount that with AC511M to work.
Hier mein Modell für ein Tankgummi für die Suzuki GS500 e. Wird mit TPU, 10 Infill, 3 Außenlinien gedruckt. 0.28mm Layerhöhe und 0.2mm Düse. Erfüllt seinen Zweck sehr gut.
Battery Terminal Cover / Protector for Canon BP511 camera battery Battery slides in and locks in place for safe storage. Protecting the battery exposed terminals for safety. Printed in PLA at 0.2mm and without supports on a Prusa Mini+.…
Original model and build instructions here: https://marcosatm.com/2020/06/04/2in-crayford-focuser/ This is based on the nut version as I found the heatserts for the bearings difficult to get right. I've added a lug to secure the reduction…
My own version of the Philco model 511 vintage radio speaker. These were wired to the main radio, and are very hard to find. I needed one for a show, so I built a wooden version of the main radio (the originals are metal, painted to look…
https://s.click.aliexpress.com/e/_mPyHFAP
Created some custom mounting options for the Govee Life Smart Wifi Gateway H5110 system. Does not matter which end of the Govee sensor you place into the holder as the design leaves a small air space where the sensor takes in ambient air,…
Garden mower - Alko YTK5112 - Handler for switch
BMW G20 51128099902 lid cap - plastic cap when original is lost. Small part only.
Das Modell ist eine verkleinerte Version des Sovol SV08 Fußmoduls. Diese habe ich verkürzt und mit einem Axiallager ähnlich der Hula Füßen versehen. Allerdings sind die Axiallager etwas größer als die von den Hula Füßen. Axialkugellager…
Open case for 5110 LCD and ESP 8266 mini. The holes are 2.5 mm diameter, I used some screws for plastic that I already have. The ESP board I have has 2 holes at each side. There are several models with different size. I attached the…
I made a set of replacement pieces for the LaserActive, but as they are all quite small detailed parts (and not to mention, awkward angles for FDM printing), it either requires a Resin printer, or you could order them through a shop like…
This is a cover that blocks the exhaust valve so you won't risk spraying out covid. Print and glue to mask
This Tradfri Shortcut-Button mount is designed to be added to a Typ 2511-2 light switch. The light switch will be used to secure the case on the wall. In addition to that, double-sided tape can be placed at the rectangular cut outs at the…
The SP511E LED controllers are cheap and good controllers for addressable LEDS. The controller can be reflashed with WLED. The programming headers are exposed, but rather small. This programming jig uses standart 1mm pogo pins to connect…
After having to print a new base plate for my doorbell because the original broke. I decided to try my hand at creating a magnetic base as I was attaching it to my metal screen door. In the photos you will find my print, the magnet should…
I needed to replace a wheel on my compact dishwasher Electrolux ESF 2300. The original part number was made in PP, and had several revisioned part numbers: #1551183104, #1551183005 and #1551183013 Print with thick walls, high infill (I…
Here's a quick design I made today. I recently got an old Canon EOS 300D and wanted to put it to some use. However I did not have a battery for it or a battery charger. One of the challenges I had with this is that no one else appears to…
A Gridfinity 1x1 holder for the Bergeon 2611-TN No 2 ½ 4x lupe. It comes with a nice 4x in the bottom so you can see what you are looking at even without taking it out. 100% Gridfinity compatible
When I got a new desk and monitor arms, I wouldn't be using the monitor stands that the Dell AC511 speaker bar I had clipped onto. The speaker bar will connect directly to the bottom of some models of Dell monitors, but not mine, of…
This is a VESA mount for the Dell AC511 soundbar for the Dell P2419H monitor. Please read the description of the original remixed model. Parts I used: 4x M3x6mm screws 4x M3, L4mm, D5mm inserts (a lot of variations could be found on…
Quick replacement part to make the mount that comes with the Dell Stereo SoundBar AC511M useful if you don't have a dell monitor stand. Unscrew the existing front plate from the mount and screw in the new 3d printed part, assemble like in…
Erstatzdichtung zum Drucken in TPU Die original Dichtung besteht aus Schaumstoff und zerreicht leicht oder löst sich mit der Zeit auf.
Tiskl jsem z PETG se 100 procentní výplní a 4 perimetry. Jedná se o dočasný háček do zámku dveří u pračky. Např. než dorazí nový náhradní díl. Funkčnost dílu je v pořádku, životnost nemám otestovanou.
My dad recently got a 2024 Toyota Tacoma and wanted to use his Forged Carbon Fiber License Plate Frame - 2 Holes Angled Bottom - Matte Finish from Carbon Fiber Gear. The inset of the oem Toyota front license frame (75111-AK010) does not…
Holes for mount display module has 1 mm, precission frame around display area. Designed as wall mount extended show device of my meteostation. Sorry for darker images..
This is a W.I.P. case for battery, motherboard, daughterboard of Acer spin 511, Intel stock cooler, and a USB hub. Great for a mini pc with low power usage (up to 20W) Using this case with this cooling configuration, u can expect as much…
Adjusted models to use a 51105 axial ball bearing (instead of 51104) for the rotating platform of the DIY camera slider.
If you have a 3m tc-84a-1299 mask - you've probably been told it's not good for the current COVID 'protection' being mandated. Most people don't get it - but these masks vent your exhaled air, so if you have COVID - in theory you'll…
Produktbeschreibung Diese speziell entwickelte PLA-Halterung ermöglicht die stabile Befestigung der Dell AC511 Soundbar an einem Dell S3422DWG Curved Gaming Monitor. Der maßgeschneiderte Adapter überbrückt die Kompatibilitätslücke…
According to ChatGPT, the 44511‑27E00 or my variant main_vibration_damper should fit: Suzuki GS500 (naked) - GS500 K1 -K6 (2001–2006) Suzuki GS500F (faired) - Models K4, K5, K6, K7, K8, K9 (2004–2009) Suzuki Bandit Range - Includes Bandit…
This is a clip to hold a Dell AC511 soundbar to the top of my cubicle (which is the sort kind, just above desk height). It snugly fits the built-in clips, and locks in place over the cubicle top, but leave a ledge for desk toys. Print…
Jelikož se mi do ruky dostal vysavač Sencor SVC510 jako funkční před vyhozením a neměl hadici, rozhodl jsem se vytisknout nástavec na hadici, kterou jsem měl z jiného vysavače. Průměr na hadici je veliký 45mm. Tisknuto z PLA případně z…
I just added the ability to mount it without a wall mounting bracket. You need a longer screwdriver for that. If you want to pre-drill, you have to remove all the other HIVES, otherwise the cordless screwdriver won't fit. Ich habe…
Printable version of HP's 2.5" drive isolation grommet screws used in EliteDesk and ProDesk desktops. HP ships these systems with screws for only one drive, leaving the extra bays unusable. Sure, you can buy the originals — but who buys…
Quick screw down bracket for a MokerLink 2G05110GSM network switch Using two of these on each side of the switch For mounting the switch with the ports facing sideways. It is ~ 0.5mm in height less than the thickness of the switch so that…
This is a replacement d shaft potentiometer for the Canadian Westinghouse, Hamilton 511A Ch=511 1936-37 Table top Radio. Printed in PLA. Should be in a red brown (could not find a filament close to bakelite material) so used Black.…
Disclosure: This may be as much a repair as a 3D print of a new spare part. Explanation of the problem : The latch for the locking mechanism on the front half of my Electrolux ZB5112E Handheld vacuum cleaner had broken off and the part…
ORGANIZER GT511 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
This is a wallmount which also allows to lock the standard charger (tested with the EU charger) in place. So if you really want to still use the Nokia 5110 a phone, this should allow you to easily attach the mount to the wall an place the…
A spare part compatible with several vehicles from the VAG group. Spare part number is 7L0 907 511 AL or 7L0 907 511 E This is an enhanced version of the original VAG part. You can insert an M3 bolt through the star-shaped piece and glue…
I got similar thing with the printer, but could not find the model anywhere and decided to design my own This model uses 4 10x2 neodymium magnets to stay attatched to steel chassis of SP-3 printer, and 51110 3-part bearing to allow smooth…
This custom mount allows you to securely attach a Dell AC511 soundbar to the Samsung M7 monitor , providing a clean, space-saving audio setup without modifying your monitor or soundbar. Designed specifically to fit the Samsung M7’s…
It's a basic 3D model of the iluminize 5112.80 Zigbee 3.0 LED Controller Mini 8A to use as a reference in your 3D models to estimate the size and screw hole placement. If you like what I'm doing, please give it a like 👍 consider joining…
This is an adapter to use the ac511-soundbar-part.stl from this model to integrate on HP OMEN 27Q display. You need voron style M3 heat inserts and M3x40 screws. Use at least 4-5 perimeters, and PETG or ABS, avoid PLA. Printing Orientation.
This is a mount for the Stanley 62-511 9-Way Screwdriver set for Multiboard. It uses two multipoint bolts to mount it.
UPDATE: Failed after a few weeks, i was using PETG, maybe another filament would work. A quick print to fix a common issue. This slider (and the original) can easily be scaled to fit other models. I have a few pairs of fiskar scissors and…
This is the base tray to hold a Receiver box. It mounts over the rear shocks, but does not interfere with the shocks or suspension. I do recommend changing the rear shock screws out to a longer screw. I used 18-8 Stainless Steel Socket…
Got a fully sick Jeep, mate? A YJ, mate? With, like, light bars and winches and lasers and stuff, mate? Then you need a place to put the switches! This switch plate was (poorly) reproduced based on the discontinued factory part, with…
I was trying to replace my Dell Soundbar AC511 with a pair of better speaker units. To mount the new speaker units (which have two readily available screw holes per unit), I reverse engineered the mount units of AC511, and created this…
If This Bot Sees You Search 5383377511 On Google It Will Get Mad
I am currently repairing a Beogram 5500 and made this as a Replacement for part 1611 – 2851121. This part is also use on the Beogram 3000, 3300, 3500, 4500, 5005, 5500, 6500, 8500, 9000, 9500, and TX2. Printed with 0.2mm layer height…
Retaining Clip for Upper Tray spary arm for a General Electric Tri Clean(GSD5511L00WW Perfect fit works well. I printed this in PETG, but may goto Nylon if this one fails. Follow print instructions on your filament for heats. I Printed…
If you're finding yourself here voluntarily, then I apologize in advance. I was attempting to retrofit an existing AP installation that had PoE to connect a FortiExtender for support purposes, since it was in a wide-open area with no…
Popular mechanical key lock in many ATMs and safes: S&G 6880 (and family 6800) - this is optional front cover 6880-511 (this is simple version, without swing cover like 6880-500). Holes should fit in typical safe box with predrilled…
My truck has an OEM trailer brake controller, but occasionally someone needs to borrow the trailer who doesn't have a brake controller. I keep this mounted inside the trailer, just in case. You will need a cheap bungee cord from Amazon,…
Replacement Sun Visor Clip for BMW E9 CS 3.0 Part-Nr.: 51167766079
A case for mounting the Sparkfun Fingerprint Scanner outdoors - https://www.sparkfun.com/products/11792 Check out my IoT Garage Monitor Opener Project here:…
If you have a Dell soundbar AC511, you can use it without a compatible monitor, just as a standalone soundbar. Print at 10-15% infill. I used cork padding to avoid sliding. No supports required, easy print. Made in Freecad.
Attachment designed to hold an Anker 511 Travel Power Strip to a Supedesk Dual Monitor Stand. Allows for adjustment in height of the holder and placement between monitor arms. Intent is to manage all power cables to the devices on a small…
Feet for the wooden box style carrying case for the Consul 1511. Designed based on my 1958 Consul 1511, I had an older 1955 Consul 1511 but it used a different, wedge style case and was incompatible with these to my knowledge File…
The diameter of the rods is 5.7 mm and the distance (center to center) between them is 49.3 mm. I recommend printing it from ASA as it is uv resistant. Die Stangen des Zauns haben einen Durchmesser von 5,7 mm. Der Abstand (Mitte zu Mitte)…
Cobra8 ESC Top Cap. Fits ESC Tray I posted. I used two 18-8 Stainless Steel Socket Head Screw, M3 x 0.5 mm Thread, 35 mm Long to bolt the ESC in with. Used 3mm washer also but not necessary. The machine threads in to the ESC tray so no…
C-DATA FD511G-X ONT can be a bit hot ( btw as other ONTs too). So, why not to give it a bit more air for breathing.
VESA mount for the AC511 on the Lenovo P40WD.
Feet for the Consul 1511 typewriter. I designed based on my 1958 Consul 1511. I did not test on my older 1955 so unsure if compatible with the earlier variant. Material/Filament: - Designed to be printed in TPU. Best results for 70A-75A…
Philips Q5115 haricutter repair
I got this Dell AC511M sound bar only to find out that it wont fit on a Dell U2417H monitor. 🤯 The original table stand by ccc888 was great, but I wanted a taller one that would look nicer under my monitor. So I converted the original f3d…
Note: This design is only for 51101 axial ball bearing !! Not for F8-22M!! Increased height to total 41mm. So the external fan fits better under the MCU-plate and gets better air ventilation. Thanks to @steinbachnic_1433725 for this great…
Body mounts for the Consul 1511 typewriter. They are split into two pieces for this print as that makes it much easier. The thinner mount (file ending in 2) goes between the body and frame, and the thicker (file ending in 1) goes between…
