Sicherheitspin Rotel Cube 703 / Security Pin
Sicherheitspin wird benötigt, damit der Cube nur in der richtigen Position betrieben werden kann.
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
100 modeli
Sicherheitspin wird benötigt, damit der Cube nur in der richtigen Position betrieben werden kann.
About model My custom design of Loudspeeker trim (front door) for Volkswagen T4. Made for a friend's Multivan, because I didn't like an already available multipart cover with need of glueing on Thingiverse. Compatibility For T4 Multivan /…
https://stllink.pages.dev/
This model is compatible with the lego system.
◆ Redistribution of this mod, sale of products/commission using this mod is prohibited. (If you want to do, please contact me.) I am not responsible for anything that happens using this mod. This mod may require post-processing depending…
This is a remix with added inserts of the excellent parametric rugged box that can hold a ZT-703S oscilloscope/multimeter (or a ZT-702S since they share the same dimensions) and some of its accessories. The two grids have to be glued in…
If the scroll wheel stops working its probably the axle which is broken. This is a plug to replace the axle from the wheel to the sensor. Remove the old stump whit a plier and press in this replacement in the hole. No glue is needed.…
The finishing trim piece that goes around snap studs in Volkswagen T4s (Transporter, EuroVan, Caravelle). Best printed with something flexible and near-zero infill for like-factory feel, but even plain gray PLA works well to enjoy the…
Created in Autodesk Maya as my scanner does not work on smaller than 100mm*100mm*100mm
Remix of the amazing wing by Tom Stanton but with the airfoil SD7037
Turn your Logitech G305 into the best ergo mouse in history! (which is G703/G603 imo) I made this because the G305 is still the cheapest good wireless gaming mouse in my country. HUGE credit to Rollinsloth's RS4 design;…
Not much to say else. Just print it no supports needed in any filament type you like. Choose between text and no text version. OpenSCAD File included as ususal. Have fun!
This model is compatible with the lego system.
This is a reproduction of part [H0518-3P / DJ7033-7.8-11] by the 3B auto parts manufacturer for use with H4, 9003, and HB2 7.8mm spade terminal headlight wiring. Original part: http://www.iiib.biz/en/proView.asp?id=550 For the matching…
The LandCruiser and Lexus LX have a front hub that extends further out than the Method 703 wheels. This extension mounts to the wheels, then allows the Method hub cap to mount to the outside. NOTE: I just added a second set of files that…
Protects your LCD screen from damage. Printed with PLA 0.2mm layer height, 100% infill, PETG should work too. Fits original SmallHD cages.
This is a handle to attach on top of the SmallHD 703 monitor (it does fit the 503 aswell but only without the cage). It was designed in similar manner to the handles found on SmallHDs Production line of monitors.
Use your ZT-703S or ZT-DQ02 with backcover in the rugged case. OpenSCAD-file is included. Copy the originbal bottom inlay file in the OpenSCAD folder and rename to bottom.stl Enjoy!
A Remix of the stand for the Playmobil DeLorean (70317) by CGPedals with the DMC logo added to the base plate.
This is a modified design for Raspberry Pi 4 with Geeworm X703 Thanks for AiakosK https://www.thingiverse.com/thing:667
Front skid plate for the 1/16th scale Traxxas mini e-revo. Replacement for part # 7037. If you like bashing your revo on concrete, the stock part will not last. I got tired of buying 6 parts in a bag to replace this one part over and…
My WM-703C didn't come with a battery cover for the gumstick battery compartment, so I modeled a new one for it. A 0.2mm nozzle is kind of mandatory, unless you want to do a lot of post processing. My covers fit without any sanding,…
11.04.2026: Added a new version where the part can be printed in two separate models.The print direction is better for stability of the individual two models, so it will not break again. The inserted pin should be printed in 98% size,…
Сотовая стенка для хранения ZPYI zt-703s
Dishwasher spare part 807035801 8070358018 Mounting Holder Bearing Headboard for Spray Arm For: AEG, ZANUSSI, ELECTROLUX, WHIRLPOO
Storage compartement for the Dongle on the Logitech G703 mouse. Uses the original magents from the original mouse.
TESA Brown & Sharpe Dial Test Indicator .0005" bestest 7030-5 Gridfinity Bin 1x2 grid bin, stackable even when full. Easy to remove and keeps the indicator safe when in storage.
ZOYI ZT-702S(703S) scope Low Angle Stand angle 25 degrees
Adapter for fan 7030 and pipe 1" (24,7mm)
The Kenmore 158.1703 sewing machine has a left homing needle. These plates allow the user to have a Center-Homing or Right-Homing Needle instead of the factory default Left-homing. To use, select the CAM position and set the stitch width…
This model is compatible with the lego system.
The Gira 115703 interior plaster outdoor power socket is the most frequently installed power socket for outdoor use by electrical contractors. However, it is also the outdoor power socket for which the cover breaks off most frequently:…
This is a simple replacement stand for the Zoyi/Zotec ZT-703S. It may work with the ZT-702 as well but I don't have one to test with. I print it standing vertically with the top hinge side on the heatbed but you may find another…
Brown & Sharpe BesTest Dial Test Indicator 599-7033-3 0.00005" Graduation, 1-1/2" Dial gridfinity bin Small 1x2 grid bin. Stackable even while full. If you want a larger storage bin for this same indicator, check here. It will allow you…
No Support…just print it :-) Two alternatives… use what you like.
Remix of the original CSGO karambit for a 6703-2RS (23 x 17 x 4mm) bearing.
Mit diesem Adapter kann die 19mm Kalotte von Ayima an das Sica Q07030A Horn angeschlossen werden. Diese Kombi ist in der “Rocky” von Alexander Gresler verbaut: https://www.donhighend.de/?page_id=10033 Zur Befestigung der Kalotte am…
Some Logitech mice are known to develop scroll wheel issues over time. The pin/rod that rotates the scrolling mechanism inside gets worn out after a while and starts skipping. I used to buy replacement wheels online but they also tend to…
These are the SMALL set knobs for the Lowel Omni Stand 01-33 (and apparently Uni TO Stand UN-33 and Uni-stand UN-33), to replace the knob-end of Lowel part number 7038. If you need the stud, it's kind of an odd bird. You can cut it from…
This deployment altimeter mount places an Eggtimer Apogee atop the 2.5-to-2-inch transition of the Estes Argent. To attach the mount, you'll need to remove the top of the blow-molded transition, and attach with small counter-sunk flathead…
The Kenmore 158.1703 has a small handwheel that some find painful to use. This bolts in place of the original and uses the original screw to hold it in place. I've made it a tight fit, so be prepared to scrape and sand it to get a perfect…
I printed the original version of this model and I liked it, but I wanted magnets on the bottom to help it stay put in the drawer. While I was at it, I trimmed off the raised sections that would allow more gridfinity bins to be stacked on…
OLEO-MAC Lawnmower Throttle Lever 66070341AR – replacement throttle handle for lawnmowers. Designed to restore full control over engine speed, compatible with selected OLEO-MAC models. Durable and easy to install.
SK-Cube 7035 Blower fan via CPAP tube part cooling mod for Breezer Hotend used GDSTIME 7035 blower fan Breezer Hotend https://sites.google.com/view/seckit-wiki/Breezer and M4 screws + Nuts (2x34mm 4x12mm, 8 Nuts) Can be installed to take…
Snap-fit enclosure for the Silicon Labs XG24-EK2703A / EFR32xG24 Explorer Kit. The EFR32xG24 Explorer Kit is a small form factor development and evaluation platform based on the EFR32MG24 System-on-Chip. The EFR32xG24 Explorer Kit is…
This is a 3d printed model of the 6 star TYC 7037-89-1 (AKA TIC 168789840 ) star system. This system is found in the Eridanus constellation and is about 1900 light years away. This system consists of 3 binary systems. 2 of the binary…
Brown & Sharpe BesTest Dial Test Indicator 599-7033-3 0.00005" Graduation, 1-1/2" Dial gridfinity bin, Large 2x3 grid bin. Lots of space for tip, and fixturing storage. Stackable even while full. If you want a small compact storage for…
A bracket for mounting the Logitech G703 USB Adapter/Dongle. Printing: Prints with no supports. Usage: Mount with double-sided tape.
Leider fehlen noch die Befestigungspunkte
re-render of modern interpretation of vintage 1890s patented by C.C.Packard leaf shutter, remixed from published on flickr blow-up diagram. Used image to 3d model on Makerworld with export to .stl Powered by MakerWorld-Image-to-3D (…
Tripod Mount Ring for Sony E 70-350mm F4.5-6.3 G OSS (SEL70350G)
Gridfinity storage for Logitech G703 mouse with the slots to put in the extras, USB dongle, weight and the adapter
The battery life of my Logitech G703 Hero started to decrease, so I wanted to change it, but I could not find a 240mAh replacement, so I bought a 1000mAh one (CS-LOG900SL). However the battery housing of the G703 Hero is designed for a…
Needed a simple tablet holder, because this tablet does not come with one. Utilizes the docking holes on the bottom.
Created this with top and bottom mounted 120mm+ fans. I use 120mm fans with 230cfm and added heatsinks with arctic mx-7 thermal paste and upgraded 120mm fan on front of miner to heavily overclock. One version has ports at top or bottom to…
Backstory I have had multiple feet break off of my toaster oven, rather than replacing it or dealing with the wobbling, I decided to create replacement feet for it. I designed this from scratch in Alibre Design. Print Recommendations I…
Overview A while back, the scroll wheel of my G703 failed - it spun freely but no scrolling would register. Opening up the mouse to take a look revealed that the left-side axle of the wheel, which sits inside of and spins the rotary…
The original knobs on this cooktop are prone to their chrome finish wearing off over time. I created this to address that issue. LED Compatibility: The initial layers of this print can be made with clear PETG, allowing the cooktop's…
Von Duprin 970321 299 Shim also good for Falcon FA299 These things are tiny stupid simple and $21 freaking dollars each. even third party on ebay is $6.25 ($25 for 4) F That. 5 grams of plastic. Done. Adjust thickness for variable shimming.
After some neanderthal sideswiped my F-150, this piece broke off my truck's mirror/360 camera. The replacement piece of plastic was >$70, so I wasted far too much time recreating a pretty-close replacement - it's not perfect, until you…
Print with flexibles. Category: Parts
Mount for the Dewalt DCD-703 12v 5-in-1 drill adapter bits
Dies ist eine zurückentwickelte (Reverse Engineered) Abdeckung, die vom Originalteil nachgezeichnet und für den 3D-Druck optimiert wurde. Es handelt sich um den "Front Fork Lower Closing" (Piaggio U. Verschl. Gabel) , der in der…
Variants of the parts by Ilyas Sofian. - Lighter baseplate with cutouts - Comfort groove on the mouse clicks. Also 1mm extended for more travel clearance. https://www.printables.com/model/811624-logitech-g1008-mod-g703-shell-g305-pcb
Nylon Layer height 0.12mm
Will be adding a spot for the scope leads here soon. .2-.3 layer Hight 25% infill 3 walls no supports prints bottom down with no supports.
The case for the WSR703.org Altimeter Tester project. The project is described in detail at MacModeler.net and includes a video of its use. The Arduino code files for the electronics are at GitHub/memcbride The download includes the .stl…
This is to replace a Snapper mower speed lever anchor part number 7032830YP. The biggest functional difference between the actual part and this part is that the mounting hole is circular instead of square. My mower didn't have the square…
This is a clean, no-fuss mount design for 2" thick Owens Corning 703 (OC703) rigid fiberglass panels—perfect for dialing in your home recording studio without overcomplicating the build. If you’re chasing tighter mixes, cleaner…
I got a couple of these Ikea FEJKA fake succulents for my desk but didn't want the bottom of the pot scratching up the desk if it got slid around. I printed them in Kingroon TPU. 5 top and bottom layers, 3 perimeters and 6% hex infill.…
Stand for Gorenje SM703GCB multimaker plates that I made. It can be printed in one piece on Flsun SR. Fits 6 plates/inserts that have the following size: 223 x 125 x 9 mm.
This is a clean, no-fuss mount design for Two panels side by side 1" thick Owens Corning 703 (OC703) rigid fiberglass panels—perfect for dialing in your home recording studio without overcomplicating the build. If you’re chasing tighter…
TOTO WN87035互換 洗面台の排水口ヘアキャッチャーです。 https://tom-parts.jp.toto.com/webshop/products/detail/676
These nice LED path/border solar lights are pretty water resistant on the top, and come with the black plastic widgets to create a mounting spike for pushing them into soil. We initially just put them on the path, not realising that the…
Grater drive disc Kotouč unašeč struhadel
I love this mouse. It's the perfect compromise between cost and performance, but it's annoying to have to charge something that never leaves one spot. That's silly. When the mouse shows a low battery warning, when you're done with your…
Mouse case consists of base and cover. Magnets are used in this model 5mm diameter 5mm height 4pcs for cover 5mm diameter 2mm height 4pcs for base (pause necessary to insetr magnets) CHECK POLARITY BEFORE PUTING MAGNETS IN PLACE Test…
This is a clean, no-fuss mount design for 1.5" thick Owens Corning 703 (OC703) rigid fiberglass panels—perfect for dialing in your home recording studio without overcomplicating the build. If you’re chasing tighter mixes, cleaner…
This is a clean, no-fuss mount design for 1" thick Owens Corning 703 (OC703) rigid fiberglass panels—perfect for dialing in your home recording studio without overcomplicating the build. If you’re chasing tighter mixes, cleaner…
This is a clean, no-fuss boarder for a 2 gang outlet for 1" thick Owens Corning 703 (OC703) rigid fiberglass panels—perfect for dialing in your home recording studio without overcomplicating the build. If you’re chasing tighter mixes,…
A simple travel case for the G703 mouse its not perfect it fits the dongle as well
Overview This model is a replacement body for the original Bakelite fuse holder/carrier (Part No. RD3686AU , stamped with 2703 ) used in classic British luxury cars from 1946 to 1955 . The original Bakelite parts often become brittle over…
Deutsch Mennekes 17038 – Ersatz-Halteband (Aggregat-Steckdose) Da das originale Halteband der Mennekes 17038 (in meinem Fall verbaut in einem Notstrom Aggregat) nicht als einzelnes Ersatzteil erhältlich ist und ein verlorener Deckel zu…
This is a protective cap made specifically for the ANENG GN703 Smart LCR Tester . This model: https://s.click.aliexpress.com/e/_c3GaMIiL It securely covers the tweezer measurement tips, protecting them from accidental damage, dust, and…
Mouse case consists of base and cover. Magnets are used in this model 5mm diameter 5mm height 4pcs for cover 5mm diameter 2mm height 4pcs for base (pause necessary to insetr magnets) CHECK POLARITY BEFORE PUTING MAGNETS IN PLACE Test…
Variants of the parts by Ilyas Sofian. - Lighter baseplate with cutouts - Comfort groove on the mouse clicks. Also 1mm extended for more travel clearance. https://www.printables.com/model/811624-logitech-g1008-mod-g703-shell-g305-pcb
Some Logitech mice are known to develop scroll wheel issues over time. The pin/rod that rotates the scrolling mechanism inside gets worn out after a while and starts skipping. I used to buy replacement wheels online but they also tend to…
This model is compatible with the lego system.
Overview A while back, the scroll wheel of my G703 failed - it spun freely but no scrolling would register. Opening up the mouse to take a look revealed that the left-side axle of the wheel, which sits inside of and spins the rotary…
This is a clean, no-fuss mount design for 1.5" thick Owens Corning 703 (OC703) rigid fiberglass panels—perfect for dialing in your home recording studio without overcomplicating the build. If you’re chasing tighter mixes, cleaner…
This is a clean, no-fuss mount design for 1" thick Owens Corning 703 (OC703) rigid fiberglass panels—perfect for dialing in your home recording studio without overcomplicating the build. If you’re chasing tighter mixes, cleaner…
This is a clean, no-fuss mount design for Two panels side by side 1" thick Owens Corning 703 (OC703) rigid fiberglass panels—perfect for dialing in your home recording studio without overcomplicating the build. If you’re chasing tighter…
My WM-703C didn't come with a battery cover for the gumstick battery compartment, so I modeled a new one for it. A 0.2mm nozzle is kind of mandatory, unless you want to do a lot of post processing. My covers fit without any sanding,…
Tripod Mount Ring for Sony E 70-350mm F4.5-6.3 G OSS (SEL70350G)
Use your ZT-703S or ZT-DQ02 with backcover in the rugged case. OpenSCAD-file is included. Copy the originbal bottom inlay file in the OpenSCAD folder and rename to bottom.stl Enjoy!
These lug nut covers will fit on the Ford Transit AWD (not RWD), on Method MR701/MR703 wheels, with factory nuts. Very unlikely to fit other configurations. Friction keeps them in place nice and tight, no need for more (e.g. magnets).…
This model is compatible with the lego system.
These lug nut covers will fit on the Ford Transit AWD (not RWD), on Method MR701/MR703 wheels, with factory nuts. Very unlikely to fit other configurations. Friction keeps them in place nice and tight, no need for more (e.g. magnets).…