276 modeli
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! A10 Thunderbolt This is another plane for your collection : the fantastic A10…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I recommend printing the lever in the orientation shown in the last photo to ensure that the faces that interface with the vacuum and c-clip are smooth and precise. I printed at 0.2 mm layer height up until 12 mm and then at 0.1 mm from…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created the original A10chy a good few years back. Since then there have been other people who made their own variants since but this was the original printable A10 Warthog-Benchy (A10chy). For anyone interested in the history of this…
This model fits nicely into a spent A-10 30mm casing. A dab of glue keeps it in place. Print with 0.1 layer height and heavy infill for realistic (ish of course) weight.
Brief History The A-10C Thunderbolt II, also known as the A10 “Warthog”, is considered one of the most bada** aircraft ever made. Designed and produced by Fairchild Republic in the 1970s, the A-10's purpose was to provide Close Air…
This version of A10chy (V3) had not been released until now. Version 3 has a lot of tweaks and changes to make printing easier and also improve a few things that make it the best A10chy version overall. It has enough differences from my…
Holder for ther FlySky 10 Channel Receiver Its created with OpenSCAD so you can change it . Using OpenSCAD download OpenSCAD https://openscad.org/downloads.html open the .scad file make any changes you need Use F5 to preview the model or…
Originally published here: Samsung Galaxy A10 a105 case by tato_713 - Thingiverse This is the case for the Samsung A10; for the A10e see this post . Some of the models are designed for rigid materials and others for flexible ones. The…
MERICA!!!!!! it a gun with a benchy built around it……. Simple basic print. Yes to supports.
Update 09.01.2020: I updated the lead screw nut hole to accept a wider range of lead-screw nuts, before the diameter was 22.0mm and now in V2 its 22.6mm. I also added some minor tweaks overall. (check out the gif on the bottom of the…
Instinct MI50 BBQ blower fan shroud JSCAD share link There is a new sticky “Radeon Instinct MI50” thread on mersenneforum.org (registering needed for access): https://www.mersenneforum.org/node/1072920 Used Radeon [pro] vii GPU prices are…
After struggling to find any kind of upgrades that can be done on this Monoprice MP10 printer (same as the MALYAN MA10), I designed and created my own V6 Hot-end adaptor. If you own one of these printers, this adaptor lets you KEEP the…
I had a lot of trouble finding a fan duct model which worked on the late 2018 version of the Geeetech A10 - all the versions I found were too wide and didn't work. This is a reimplementation that's close to the original, with some…
Since I moved the LCD-Display and the electronics case to the left, I needed some end caps to cover the aluminum extrusions. It's a tight fit. The cap needs to be pressed firmly against the Extrusion. This way it won't fall off easily.…
This is a remix of the NVIDIA Jetson Orin Nano Developer's Kit Case. Modified it to work with the Adafruit Can PAL (CAN FD), and created a honeycombed bottom to provide airflow for the M.2 SSD and the rest of the Jetson's underside…
Printed vertically with the fan side facing down, with supports to support the part that mounts the shroud to the card. M3x10 screws used. First plug in the EPS to 2x PCIE cable then mount the shroud and screw it in using the 2 screws and…
Continuing to practice and learn Blender I present the famous Fairchild Republic A-10 Thunderbolt, commonly known as the Warthog. Famous for its impressive 4000 rounds per minute Gatling Gun intended foe use against ground based armoured…
A remix of my own remix of a Geeetech A10 fan duct. Print Settings Printer: Geeetech A10 Rafts: No Supports: Doesn't Matter Resolution: 0.2mm Infill: 15% Filament: Grosssiste 3D PLA Silver Notes: You can print on the flat surface or on…
This is a Afterburner-mount for a Ender-3 style printer. The mount does not use the original metal bracket, but the excentric nut is necessary. I have it running on my Geeetech A10 and it does it's job quite well. Feel free to give some…
Made a nice organic looking air intake to cool four Nvidia CMP 170HX PCIe cards with two high pressure 120mm fans. They move more air than 8x 40mm fans and are hell of a lot quieter. Also compatible with the A100 PCIe and potentially…
120mm fan duct for NVIDIA A100 / CHMP 170HX GPUs. It's not a very efficient design, but it's enough to cool a CMP 170HX with a 120mm Noctua industrial 3000RPM fan. .STL file is included Printing: Orientation: Large Flange on bed Material:…
LA101, CZ457 Single Shot Mag I use for Benchrest shooting with double feed ramps to lift and align bullet into chamber minimising contact to increase accuracy. Taken from my M14 adaptor grafted onto modified CZ mag to fit the LA101 or CZ.…
Bottom is flat. Case is tested. Best printed slowly in TPU.
Get rid of the sloppy wires that rub against each other during prints on your Ender 3 or A10. Designed to work with a stock hotend setup, this mod adds a neat and tidy cable chain from the hotend to the extruder of your printer. To mount…
The original design worked quite well for me, but I think it had too little airflow. So I increased the diameter of the nozzle-holes to 2mm. Works better now :) 2nd version with reinforced mounting holes. PETG recommended, PLA might bend…
Sigma Aura 100 gopro Halterung /Sigma Aura 100 Gorpo mount
Update 29.12.2018: Version 1.1 of Skorpion where the duct mount was thickened and the duct outlet was shortened to be a little more far away from the heater block Because the cooling on my A10M and A20M was not quite convincing, I…
A simple and strong wall holder for the spare Tineco brush that holds the brush at one angle. The model should be printed standing up (like the picture) with the help of a brim, no support is needed :) Print settings (suggestions) Print…
Another fan duct for the geeetech A10 v3. Remixed from a mazzoca design, I just made the output of the duct larger. Using a 5015 fan, there is now a sufficient airflow in my opinion (the 3D benchy does not have cooling problem anymore). I…
Originally published here: Samsung Galaxy A10e a102 case by tato_713 - Thingiverse This cases are for the Samsung A10 e ; for the A10 see this post . Thanks to the user AustinS , who helped me testing this case. Some of the models are…
This is another modified version of the CR-10 display housing included in xxricsx's CR-10 Standalone kit: https://www.thingiverse.com/thing:2747280 The CR-10 like display that came with my CTC A10s printer has a flaky encoder and some dim…
This is home made model rocket, designed around the A10-3T model rocket engine. It was designed as part of my attempt to learn FreeCAD. The final design was launched, flew well, and was successfully recovered. Assembling the rocket: Print…
a replacement air duct for the Geeetech a10 pro. The fan is not very good, but this will at least replace a broken stock air duct. the fan is a 3 screw 4020, if you have been looking for a duct for this fan, you will know how uncommon…
Many ranges now only all bolt to be inserted on the range. Tube allow transport and storage of bolt removed with it uncocked. Cutouts have been chamfered to allow printing standing as shown. max overhang is 30deg so most printers should…
E3D V6 Mount A10 A10M A20 A20M Designed to mount on the existing A10 X carriage, use two M5x30mm SS Hex head screws for more support / key instead of original dome head screws for top roller bearings, for quick removal and replacement…
I needed a model to hang my Elitedesk on the wall but didn't want to attach it permanently since i'm going to mount it in a tight closet. This way i can just slide it out if i ever need to plug something in. The standoffs need to be cut…
After squeezing my fingers a bit while trying to attach the (otherwise really fantastic) bed clips, I made a remix with one side of the clip being a tad longer. This makes it easier to open the clip so that it can be attached. After I had…
This 2.5" HDD enclosure is designed for the new generation of 15mm Seagate 4 and 5TB hard drives. These hard drives are cheap, whisper-quiet, very economical in power consumption and can therefore be supplied with power directly via…
Some folks who market a bunch of expensive products believe that vibrating your guitar a bunch will improve its “tone”, whatever that is. Here's a mount that you can attach to an EWA106 bluetooth speaker to put that to the test and maybe…
These feet fit on 3D printer with 40 mm aluminum extrusions like Creality Ender 3 or Geeetech A10. For the silicone parts I used 2-component silicone from "Troll Factory" (Germany) which I also used for some silicone socks and heatbed…
Meet BRRRT. The spiritual successor to A10chy. Printables admin recently removed my all terrain beach boat design for stepping over the copyright line of a certain well known test boat. Despite it being in no way able to be confused as…
It fits on the original metal bracket of the Geeetech A10, but maybe also on other 3D-Printers like the Creality Ender 3. Filament change is a bit more cumbersome than with the simple plastic tube that came with the A10, but the spool…
Geeetech A10 Fan Duct - Work in Progress! Since the original Geeetech radial part cooling fan has been extremly loud and the original duct hasn't been ideal too, I tried to improve the duct. This makes the printer a lot quieter but not…
The Geeetech A10M is a dual extrusion Ender 3 clone, suffering from same design flaw where the mainboard cooling fan is exposed to potential filament debris. After two of the Ender 3 versions didn't fit, I modelled my own. As featured on…
I have printed these on a resin printer with great results, but I doubt they will work well on FDM printers. I used 2:1 Siraya Tech Build (smoky black)/Tenacious with Siraya Tech's suggested print settings and the resulting keys were <0.1…
I printed Gomiappuroda's blower adapter (https://www.thingiverse.com/thing:6773548), with the end chopped off when slicing to save space, then used this piece to mount the blower next to the card so it fits in my case. Two versions, one…
I remixes some file to use my old geeetech A10M parts
i found printing with the nose facing up is the best with tree supports it results in a less brittle model
English: Tested and in action Igus Linear Rail Type TWE-04-12 = MGN9C Advantage of the Igus linear guides is that they run lubricant-free and quietly, the model TWE-04-12 is also adjustable and thus the bearing play can be reduced so that…
This 3D print is the emblem of the VFA103 Squadron of the US Air Force. 17x17cm | 6.70x6.70in Wikipedia link There are 3 files. One for each color. The pieces interlock with each other. There is not too much need to force the banners with…
Mounting instructions can be found in the PDF in the file section: <------ If you like this mount please use the "TIP DESIGNER" button and leave a tip for a hot or cold beverage. you can also use the link:…
TrackIR arm that mounts under the VESA100 screws. The sensor mounts magnetically to the arm like the original stand. There are short and long arm pieces to customize the arm length. Additional hardware requirements: -M5x30 bolts and nuts…
These are based in my 50Cal and 30Cal Ammo can boxes and tray organizer system.
Here are some 45 AUTO (ACP) storage boxes and trays. These are designed to be able to arrange large amounts of bulk ammo into either a 50Cal, 30Cal, or PA108 standard ammo boxes. I designed one model so that three boxes can fit either the…
Slightly simplified version of the Satsuma engine from MSC. This model includes only the essential components. The parts were printed using 0.4 mm and 0.2 mm nozzles. Assembly was done with standard superglue. The pulleys are fixed and do…
This is a custom blower cooler design for the Nvidia CMP 170HX that replaces the original shroud. It is approximately 305mm long. It has satisfactory cooling performance, while having a more traditional integrated form factor compared to…
A reupload from Thingiverse as i could not find it anywhere else, Works well and prints easily with supports for centre pieces.
Simple insert for a PA108 ammo can to give a flat bottom. Also provides a bit of a "basement" area should something leak
Printed on "the back" in order to have strong fixation points (need support in this case). Not just a shell, I tried to make a strong part. Fit geeetech A10 V3 maybe better to print it in ABS or PETG because it can lose shape in case of…
Reduction for geeetech A10 from bowden extruder to direct extruder using only printout and two screws.
I started using Prusa Slicer a lot more in the past few weeks with great results so i thought i make it look better. For each of my printers i added a custom build plate. This improves looks and it also makes it easier to see what printer…
Upgraded my Geeetech A10M Y carriage to an New Ender3 type to reduce mass. Due to the roller mounts being further apart i had to create a new mount for Y axis end stop limit switch. (see y carriage photo RED and YELLOW circles show the…
It does not need anything extra to be installed, in my case it has reduced the sound of the fan. Print Settings Printer: Geeetecha A10-v4 Supports: Yes Resolution: 0.2 Filament: PLA leon 3D PLA Category: 3D Printer Parts
Bore guide. Left a gap at breach to give another way of inserting cleaning patches. Held in by trigger so it doesn't fall out pulling the rod.
If you're here, you know why. Step and f3d files attached for the inevitable mods you'll need to do for your situation. This whole carriage weighs 900g, but it hasn't had too much negative effect, and is a trade-off for a functional…
This is a minimal wallmount for monitors with a vesa100-compatible mounting plate. It works like a frech cleat but with no chance for the monitor to slide sideways of the mount. I have a 24" benq monitor attached to the mount an it is…
Bumper para ARC A10, modificado con respecto a los peso reglamentarios no varias del original solido, se debe imprimir en TPU para temas de flex e impacto
Geeetech A10 LCD-Display Back Cover - This maybe also fits on Creality Ender 3 There are a lot of these covers for the A10, but if you are using my "LCD Display Holder Left Side": https://www.thingiverse.com/thing:4098947 these covers…
Got a small desk where your monitor takes up half the space? Mount it to the wall! This is a removable Monitor mount for your wall. There's no adjustment (yet) so you'll have to measure it right! I wanted the design to be removable so I…
The rear speaker area of the 2-door Rav4's seems to be smaller than the 4-doors. The sides have been truncated/chamfered to clear the bracing for the window and door, which required the screw holes to be moved. 128mm speaker cutout.…
After printing Seltix's top motor mount for my Geeetech A10 ( https://www.thingiverse.com/thing:3724186 ) I needed to change the position of my spool holder to align it with the extruder motor. You'll need 2 more 20mm M3 screws and nuts…
This may look like overkill with the 3 bearings and maybe it is, but it works really well :-) Whether the filament comes from underneath or above the printer, you just need to turn the arm with the pulleys in the right position. When you…
The x-axis cover plate allows the nozzle to move off the build plate to reach the bucket. Put silicone in the arm (the white in the picture) for the nozzle to wipe on. The extruder start g-code: ; Start Extruder 1 M104…
Ich habe meinen Geeetech A10 auf Direct-Extruder umgestellt. Ursprünglich hatte ich einen solchen aus dem Zubehör (Ender 3) installiert, mit dem ich aber nicht zufrieden war. Also habe ich für die Grundplatte dieses Zubehör-Extruders eine…
I replaced the power supply that came with my Geeetech A10 by a Mean Well power supply - the same power supply type used by my Creality Ender 3 Pro. I could use the bracket of the original power supply (all screw holes were at the same…
Since I experienced two broken cables after a few month of using the A10, I realised how important a solid strain relief is for the A10. There are mounting holes for the LM2596 Buck Converter Enclosure which you can find on my thingiverse…
NDr Shooting Supplies makes very nice aluminum mags but they are as slick as goose grease. This is a TPU magazine boot that improves handling. It fits their 15 round, aluminum 22LR mag for the CZ 45x series, the 512 and the Lithgow LA101.…
Having a new appreciation for silent 3D printers, I've decided to replace the Anet v1.5 mainboard that came with my CTC A10s with a Creality 32-bit board with silent stepper motor drivers (V4.2.7). My first inclination was to add…
(right and left front legs needs the parts edited so hold off on printing) Front power supply mount/Feet, Flush with the top of the 4040, Needs angled power supply cord. I also mounted the switch from the out side to the inside of the…
Fan duct for magna 1 / geeetech a10 to work with a radial fan and direct drive struder mod Brim enabled Layer 0.2 Supports on build plate only I recommend printing in this orientation, it works fine for me.
The legendary A10 Thunderbolt II "Warthog" with the signature BRRRT
i like the idea, but it doesn't fit my geeetech A10 (GT2560 V3) - also, the original parts don't fit together right!? i modified all part - may need some little improvement on the bottom part https://youtu.be/gc65BmI7iTc Print Settings…
Spacer ring allows the use of a VA80 adapter as a VA10. Print with 0.1mm layer height.
Holder for screwing down the power supply on a board. Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Notes: If you use Prusa Slicer, the included project already has the necessary…
After trying other A10M Parts Fan ducts, and they blow on nozzle i remixed to place it lower and add lip to force some air downwards. Also fillet mounting hole corner. Print Settings Printer: Geeetech A10M Rafts: No Resolution: 0.2mm…
VESA 100 mount for a Netgear R7000 router. Enables mounting router on back of LCD Monitor. Saves desk space. I swapped out the router middle antennae with an remote/extension wired antennae, so the middle antennae wasn't in the way of the…
To mount the BLTouch on the A10 you need to hold it perpendicular and keep the exact distance of the pin to the printbed while tightenig the bolts of the holder. Since I found this to be annoying, I made this simple jig. Just mount the…
thanks to "apak" for the A10M model remix of GEEETECH A10M Build Plate for PrusaSlicer by apak link to original file: https://www.thingiverse.com/thing:3866954 modified the model for use in Simplify3D
A VESA100 mount for this awesome model - https://www.printables.com/model/309029-modular-75mm-vesa-monitor-arm/remixes#preview.yxqLb
the profile is still a work in progress but it works Any doubts or comments are appreciated https://a360.co/3bPR2za Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.2 Infill: 20%…
I recommend printing from ABS or ASA. PETG used in the photo. 0.20mm layer, no supports.
January 7, 2024: Added some more performance data to the bottom of the original blog post on what happens with key down.. https://holdmybeer.io/2023/12/22/ham-stack-fan-shroud-for-elecraft-kxpa100/ January 4, 2024: I recorded a timelapse…
After trying other A10/M Parts Fan ducts, they blow directly on nozzle. I copied the original A10M Fan duct and made it longer so it blow below the nozzle, also trimmed it and laid it flat by using 45 degree cuts. Print flat no supports…
This offset is used with Creality silicone spacers as Geeetech doesnt have the bed chain cover that an ender 3 has. This piece goes near the bed cables on the Geeetech Bed.
rueda termostato honeywell T6360A1079 honeywell T6360A1079 thermostat wheel
