875 modeli
Greebles Part 2! Entry panels, hatches, and more! No support required The code and model files are using “Hatchbox” pla. Change if you are using something else (trying to use up what I bought a few months ago.) Use variable height to…
Wydruk około 5,20 €–6,36 € nettoWstępna wycena jednego wariantu
Compatible with standard garden hose fittings Mounting plate with holes for secure attachment to wood with zip-ties, screws or any other method Included broom stick adapter for attaching to broomstick shaft or anything similar. (use…
Wydruk około 3,09 €–3,78 € nettoWstępna wycena jednego wariantu
The ellipse widens the bladder and causes it to be better ventilated and thus dry faster. The formation of bad odors is reduced and can thus extend the life of the bladder. The ellipse was designed for the use with a 2 liter water bladder…
Wydruk około 0,91 €–1,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a fun little planter I designed in Fusion360. Plant little vines, or flowers and watch them grow till you have a blooming tunnel of blooming flowers on crawling vines! The boxes are pretty self explanatory, the arch is a little…
Wydruk około 3,20 €–3,91 € nettoWstępna wycena jednego wariantu
Printet on a Original Prusa i3 Mk3s+ using PLA 0.4 nozzle, 20%infill 0.3 mm layer hight
Wydruk około 12,75 €–15,58 € nettoWstępna wycena jednego wariantu
It's a buckle with quick side opening and with Pin-Lock or Ladder-Lock for 24mm wide straps. The predecessor model uses an M3 screw as a pin and an M3 nut as a mating thread Replacement Buckle for 24mm wide loop Strap with M3 screw as a…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I previously used a large spoon to aid drying out my Camelbak bladder, but it wasn't that good of a solution. This design isn't anything fancy, but it does a great job of holding the walls of the badder apart to dry it out. I printed it…
Wydruk około 5,24 €–6,40 € nettoWstępna wycena jednego wariantu
Service Key (elevator, maintenance room, electrical box, fireman ladder) a key with Insert Bit : Square : 6mm, 7mm, 8mm Rectangle : 6x9 mm Triangle : 9, 11, 14 square (female) : 6, 7, 8
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
english We had a “FRZ”-Ladder in our household where the rubber boot fell apart because of their age. The plastic was very brittle and unfortunately there are no spare parts available because the company that produced these ladders most…
Wydruk około 1,45 €–1,78 € nettoWstępna wycena jednego wariantu
Ladder for H0 and other miniatures I printed in Fuzzy Skin, but you can also print it without Fuzzy Skin. Printer settings: Perimeter: 2 Infill: 0% Printing supports: No Fuzzy Skin: Yes, All, 0.5mm
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 15% Add a some small Cylinders as Negative Volume for draining No Supports needed Scale it as you like :)
Wydruk około 5,50 €–6,73 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 15% Add a some small Cylinders as Negative Volume for draining No Supports needed Scale it as you like :)
Wydruk około 8,78 €–10,73 € nettoWstępna wycena jednego wariantu
Printer settings: 0.4mm nozzle 0.3mm layer height 15% gyroid infill PLA+
Wydruk około 4,74 €–5,79 € nettoWstępna wycena jednego wariantu
Printed with PET-G. I used 4 perimeter and 25% of gyroid infill. works fine, but no warranty in case of accidents!
Wydruk około 2,43 €–2,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed the brackets with glow in the dark PLA filament so my daughter can see the ladder steps better at night. Each of the brackets is pushed onto the ladder rung from the front and rear and screwed on with two screws. One of the…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
There's only so much space at the top of the ladder for tools, so I decided to make a box that clips into one of the existing holes in the top of ladder. Werner has updated the top plastic part of their fiberglass ladders and now has a…
Wydruk około 18,41 €–22,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Original print settings: ABS for weather resistance 0.2 mm layer height 10 perimeters 15% gyroid infill Supports everywhere to make sure the screw holes keep their shape Outer brim to avoid corner lifting Two hooks in the original size…
Wydruk około 13,49 €–16,49 € nettoWstępna wycena jednego wariantu
A bracket to mount a Rubbermaid foldable stepladder onto the wall. The inner width of the bracket is 30cm, and the two screw holes are inset and work with standard #6 drywall screws. The top screw hole is angled downward for extra…
Wydruk około 1,97 €–2,41 € nettoWstępna wycena jednego wariantu
This is a bracket that I made to attach my 3 section ladder to the celling joists in my garage. I printed it with PLA, 6 perimeters and %30 infill grid and no supports. It has also been fine with the elevated temperatures near the roof of…
Wydruk około 25,32 €–30,95 € nettoWstępna wycena jednego wariantu
Small ladder to attach to the side of your RC car
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
This sign simply points out where a fire escape ladder is, so that people can find it more easily, and escape quickly in case of a fire. Print instructions Print at the size given. Print the letters in a different color filament. That is…
Wydruk około 2,73 €–3,34 € nettoWstępna wycena jednego wariantu
just wanted to add something to the game :]
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
You still need 2 angle profiles 200 mm x 20 mm x 1 mm made of stainless steel. The thread in the cap may need to be recut. New may 2026: base for the top step Man braucht noch 2 Winkelprofile 200 mm x 20 mm x 1 mm aus Edelstahl. Das…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
This part is designed to fit into the side of a step from a ladder. It's origin is for a scaffold angle bar to tighten the scaffold, but I suppose it can be used in quite a lot applications, e.g. hanging a bucket beside the ladder. The…
Wydruk około 1,52 €–1,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Commercial license for all my models -→ https://www.patreon.com/MeasureOnce New assemblable version available on Makerworld https://makerworld.com/en/models/2624847-infinite-jacobs-ladder-toy#profileId-2897666 DO NOT SCALE. There is 0.4mm…
New! Version 2 is up, with a more robust ladder kickstand :) As seen on HotMakes episode 148, it's a little firetruck with a hinged ladder and chunky wheels! Video link: https://www.youtube.com/live/jzZMH5YQIHc?feature=share Gratuitous…
Saw this silly thing on IG (https://www.instagram.com/reel/C2FxIc6pKIZ/) and decided to make one of my own just for the fun of it :) Prints with no support and uses 6mm magnets.
Háček na radiátor do koupelny. Nutné tisknout z PET_G kvůli teplotě radiátoru Udrží i velkou mokrou osušku
reverse modeled adderini. needs to be open to public for improvements. here it is
Go ahead and divide 39 mm by your desired size and use that number as the size modifier to get a buckle of your desired size. Make sure to print with the flat side down and the tab facing up.
These ladders are to scale with Mattel's WWE Action figures and come in two sizes, corresponding to an 8ft (2,5m) and 12,8ft (3,9m) high ladder when stood up, respectively. Yes, this ladder actually folds! Both heights feature linkages,…
Ladder for tabletop games scenery. Comes pre-supported for resin. —————————————————————————— Hey everyone! I wanted to share some exciting news with you - my first Kickstarter campaign for Gracewindale: The Gatehouse 3D Printable Scenery…
A miniature ladder with 5 steps. The default (assembled) size has 90 mm in height. It's also the minimum size assumed. Note: The “spreader” parts could be fragile or hard to join with other parts especially if there are deformities. Some…
Note the pointed tip of this sleek towel hanger design, that does not care for the presence of a hanging loop! Save yourself the time of looking for the side of the towel with the hanging loop and just hang it up. Orientation doesn't…
ladder height 12 levels of lego duplo and 11 levels. ladder without handrails for easest printing. Print instructions I recommend turn ladder by 121.218393 degrees to x axis before printing.
Print with non-toxic PLA filament diagonally across the print bed. If resizing, measure to ensure that the newly sized end loops fit within your cage's bar gaps.
for your Plants to climb or just as decoration
Print at 100% scale for 1:14
One more for the CSHMFSEU (Clockspring3D/Hot Makes/Filament Stories Extended Universe)! Presenting an ambulance remix of the awesome Hot Makes/Filament Stories Flippy Ladder Firetruck to complete the first responders set. Original…
Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral: https://unstoppabledomains.com/r/cc353d5f40d64e8 Visit my website:…
A robust hook to hang a ladder onto a wall.
The case reuses the screws from the deathadder. The shape is inspired by the new razer deathadder v3, for users with a palmgrip.
My little brothers wanted a ladder to play with their wwe action figures with. It can be printed with no supports. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Yes Supports: Doesn't Matter Resolution: any Infill: 20…
Needed a replacement for a buckle that was broken. Works well with 23x1.3mm straps.
Every firetruck needs a police car buddy so I designed this remix of the awesome Hot Makes/Filament Stories Flippy Ladder Firetruck by Clockspring3D. Prints on its side without support just like the original. Original Clockspring3D Flippy…
It's a buckle with quick side opening and with Pin-Lock or Ladder-Lock for 24mm wide straps. The special feature is that the buckle can be mounted without having to cut the loop band. Due to the screw used as a retaining pin, the buckle…
My ladder buckles on my backpack broke, amazon would not replace the backpack but gave me a refund. I didn’t want to throw away the backpack so I looked around for a replacement part, but ended up designing my own. I will try the buckles…
Equipment ladder, great for tall structures such as silos, tanks, conveyer system and what ever you see a tall ladder on. Replacement ladder, we have all broken at least one! Print it, cut it to size, paint it and install it. Available in…
Remixed from: Functional Cobra Buckle https://www.thingiverse.com/thing:1656297 A remix of the functional cobra buckle print as I needed dual ladderlock for a backpack waist strap. For use with 1.5 inch wide webbing. Use M3x10 or m3x8…
Install 6mmx2mm magnets in the holes, and then place a little ladder on your vehicle of choice, make remarks to your friends with 4Runners about their ladders
noticed that the cocking arm on the adderini gets a bit warped under strain... so I'm hoping this will help... time will tell. Also I think it adds a little more comfort and color. The screw holes line up nicely, just need a little longer…
A hook and and a "spreader" to help you dry your 3l CamelBak bladder. This is a remix of theRatchets excellent design for 1.5l bladders - thanks for sharing the .f3d. I made hook and spreader and bit larger so that it fits better for my…
A generic foldable ladder in 1/16 scale suitable for use in dollhouses, dioramas etc. that was designed for my mother's dollhouse that she is building. It's designed to be able to be folded in the same was as a real foldable ladder.…
Not my model, just an upload from here .
Not my file. Reuploaded for my collection Thingiverse thing:5752468 by Superknutselsmurf
I needed a simple way to hang my water bladders out to dry. So far this fits two different CamelBak and one Osprey. Printed in Hatchbox Yellow PLA at .2mm and 50% infill
Introducing The Bladder Buddy, the innovative 3D printed solution for drying your Camelbak or other hydration bladders quickly and hygienically. This unique hanger features an internal expanding mechanism that securely holds the bladder…
My sister likes to sew and often bags. The problem is, that even cheap ladder locks with no design often costs about 2 Euros and those costs add up. So I've opened Fusion 360, created a simple version of it, and printed it in PETG. Sister…
There are two versions are available: Large and small. I personally prefer the large version. Especially the large version creates a good grip and makes the handle more comfortable to use. You can use it as a handle while aiming /…
Fletching jig for original Ek Archery 7.5" Adder Crossbow Bolts by Joerg Sprave (2 Vanes). Print: 1x Base 1x Arm_A (or Arm_A_0.3_Offset) 1x Arm_B (or Arm_B_0.3_Offset) 2x Lever Parts needed: 3x M3x30mm Screw FH 3x M3 Nut (recommended…
Print it standing to strengthen the clamps
A simple MOLLE attachment to clip an hydration bladder tube onto your backpack shoulder strap. Parametric design included so you can tweak it to your requirements if needed. The default supported tube diameter is ~10mm.
My birds love this ladder!!
A honeycomb shaped bee ladder to save bees that get trapped in our birdbath from drowning! Print with the honeycomb structure on the bed, with supports for the ledge.
My hamster needed a new ladder, so I made him one. If you want to use it you may have to adjust the length or the hole distance for your enclosure. Instructions cut both pieces glue together add hamster Category: Other
Modular, hexagonal plant support. You can print different parts (1, 2 or 3 hex variants) and stick them together using attached clips. The whole construction is quite stable for 3-4 elements. If the size does not fit your needs you can…
This model is compatible with the lego system.
H0 simple ladder - einfache Leiter -easy to print
This is a 1/10 scale folding stepp ladder. Somebody suggested that since I already had the chair and the table, I should make a stepp ladder for mini wrestling. I thought it could be fun but then I thought I could make something that had…
Handle for the rope hanging from my folding attic pull down ladder. I've got great big hands, so i scaled it accordingly. My fist width is about 90mm, so I rounded up to 100mm for comfort. The print grain opposes the direction of pull, so…
This model is compatible with the lego system.
Printed with PLA+ and it works. TPU or PETG should also work fine. Included Fusion 360 file, so you can make your own adjustments.
A small ladder for small creatures to crawl on. Category: Mechanical Toys
Wide wall holder for hanging ladder. Screwhole is M5 with 90-degree flathead. Print instructions Rafts: No Supports: No Resolution: 0.3 Infill: 30-60%
This is a 8-stacked print which includes a modification to the model, the support tower for the pins, and the slicer settings. Each piece has a height of 12mm, which is enough in my experience, especially with PETG. I've also added my own…
This Flagpole mount allows you to fly your colors without leaving the ground! It is designed to use inexpensive 1.25" Schedule 80 PVC pipe as a flagpole and attaches to a standard 1" RV ladder frame. You can pick up the pipe at Lowe's or…
Nov. 12, 2024 V1 Build 15: First release The Rolling Stones used to sing a famous song: “You can't always get what you want” But sometimes a ladder can help with that ;) The provided 3MF file can be used with: Orca Slicer/Bambu Studio:…
Pill Dispenser made for Adderall XR 20mg or any pill with the dimensions of (6.3mm x 18mm). Holds 14 Pills-(2 Weeks) -Extra Hardware Required: [2x] 5/32"-32 x 3/16 Set Screws [1x] Compression Spring ¼"x 13/32" (For Part Spring Button)…
If you print this feet please print in the downloaded orientation and use support. Its made for a Hailo 8500 ladder. I don´t know if it fits to an other ladder. Feel free to try out. Print Settings Printer Brand: Prusa Printer: i3 MK3…
Adder model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial distribution. All…
These are cargo containers with a door and roof for use around the 40K scale (resize as needed). Also included is a small cargo container, no door. I made these to use on my massive 28mm science fiction layout. I haven’t printed it yet as…
Our Son got a Tonibox and the Tonies (small figures to place on the tonibox to start music etc) needed a home. So we got the IKEA LUSTIGT. A small wallmounted shelf with ladders. But our son wanted more ladders so i simply constructed the…
These are 2 ladders that I made for a doll house
It's 4-3/4" long to ends, has open slots to secure wire with tywaps. Enjoy (ars) 73 KE4ARI
Easy to print sand ladder for the TRX4 defender
Model for miniature ladder for tabletop games for 28mm or simillar minis.
A heavy duty strap adjuster for up to 32mm straps. Includes a tab for ease of grabbing onto it when making adjustments, friction features to secure straps well, and rounded edges for comfort. STEP files included for ease of customization,…
The first print can hold things such as shovels, small rakes, or other tools with a thin neck and larger face such a shovel. The images provided show some tools I have being held on them in my garage. The second print was designed to hold…
A simple collapsible rack to help hydration bladders dry. The legs nest on the stand for storage. 10/5/25 Update: I added files for a completely unnecessary USB 5v 50mm blower I bought on amazon. This reduces dry time to about 30min…
These covers protect the blade tips from (some) damage, and of course also your skin from the razor sharp blades! Designed for two brands of hunting bolts for the EK Archery Cobra System RX Adder crossbow: Steambow Nik Archery (listed as…
We wanted to make a “Widdle Wadder” that we kept seeing on TikTok, so we did! There is a hole that is ready for magnets. Pause the print and superglue in some ¼" diameter magnets, and resume the print. If you have different-sized magnets,…
Hooks for drying gloves, towels and many more. You can use it on the side of heating ladder.
In Teile zerlegt, um den Druck auf fdm-Druckern zu erleichtern. Die Teile müssen zusammengeklebt werden / Spitted into parts to make it easier to print on fdm printers. Parts have to be glued together
Tired of the Hassle? Simplify Your Hydration Bladder with 3D-Printed Parts Are you frustrated with the inconvenience of using your hydration bladder? Discover these innovative 3D-printed parts designed to enhance your experience and make…
This ladder is designed to match Duplo bricks and figures. The top of the ladder is secured on top of a brick wall/tower. If the wall is four bricks high, the bottom of the ladder will precisely reach the ground. The vertical rails are…
1:10 Ladder, steps to the roof PLA, 210°C/60°C
Simple aquarium CO2 ladder which will print well without supports when laying horizontal. This remix uses 5mm OD airline tubing to deliver CO2 to the base of the ladder. Once the bubble is on the track it will travel upward and shrink in…
I took some inspiration from some super fancy metal ladder lock adjusters that I saw on Facebook that people use for headbands and decided to design one myself. I made three different sizes if you wanted to use it for headbands, belts or…
Edit** 8/8/23 the 10mm theraband tubing is too tough for this poor plastic device. My advice. do not use the 10mm tubing. I have since downgraded to the 6.5mm red banding. I have redrawn the arms to suit. I will report back with hopefully…
