881 modeli
This model is a remix of my Kittenbus model, made into a useful print that looks fantastic on your desktop =) definitely makes for a cute Valentines day gift! Printing Advice This model is large but doesnt require much infill - printed it…
Wydruk około 4,98 €–6,09 € nettoWstępna wycena jednego wariantu
I have created better back cover of the cables going out of the heatbed used for PRUSA BOX. The original one has unsufficient space inside for the cables to be placed comfortably. My upgrade cover is almost of the same size, but the…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Following the discussion here, https://forum.prusa3d.com/forum/english-forum-original-prusa-i3-mk4-general-discussion-announcements-and-releases/heatbreak-fan-might-be-causing-asa-abs-warping/ the heatbreak fan might be causing issues due…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Following the discussion here, https://forum.prusa3d.com/forum/english-forum-original-prusa-i3-mk4-general-discussion-announcements-and-releases/heatbreak-fan-might-be-causing-asa-abs-warping/ the heatbreak fan might be causing issues due…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 37mm x 29mm 6mm Keyring hole
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Original Prusa MINI bed cable holder points cable straight to the rear which can collide with a wall. This model turns cable along the bed so more clearance is available. The +24V cable has to be mounted to the top of the bed while GND…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Prusa MINI's connections to the heatbed are by default at the bottom of the heatbed (last picture), but the copper contactpatches are at the top. From electrical standpoint, that doesn't add up. Prusa claims that this is no issue…
Wydruk około 1,06 €–1,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have added some reinforcements to the 3D model because in the first impression they were broken when removing the support. After printing this version, now with these reinforcing ribs it gives greater solidity. Speed - 60% Infill - 15%…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Following the discussion here, https://forum.prusa3d.com/forum/english-forum-original-prusa-i3-mk4-general-discussion-announcements-and-releases/heatbreak-fan-might-be-causing-asa-abs-warping/ the heatbreak fan might be causing issues due…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've designed again the angled outlet cover, because the original one that lets cables go out straight, doesn't allow you to put the printer into a PRUSABOX made of IKEA components. The gcode attached in this project is for printing on…
Wydruk około 0,72 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I recently started using eric-anastas “Satsana Ender 3 Fan Duct” on both my Ender 3 Pro and CTC A10s printers. More specifically, I printed the Satsana duct for an Ender 3 Pro I recently picked up so that I could use its hotend cover to…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
The nets in which bird fatballs are hung pose a risk of entanglement. This model, which holds 2-3 fatballs, is safe for birds. Printing: Material: PLA Layer height: 0.3 mm Raft: reccommended (2layers) Supports: No STL file: in the slicer…
Wydruk około 3,22 €–3,94 € nettoWstępna wycena jednego wariantu
Suite à une coupure du fil de la thermistance !!! au niveau de la prise du plateau chauffant, j’ai modifié la pièce pour lui donner une meilleure fixation de sortie du câble avec un angle pour le relever et lui éviter de toucher le châssis
Wydruk około 0,62 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have created a Model to print those fragile seatback retention clips in the trunk of the Ford III. I have printed them as rigidly as possible and used PETG for best layer adhesion. The support comes off quite easily, I'd however suggest…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This part replaces the top part of a mudguard holder on some models of Gazelle (children) bikes. I hope this helps for someone. This is only the upper part. The part most likely to break. Included is the Fusion360 archive to help you get…
Wydruk około 0,31 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is a simple but super satisfying upgrade for the printer: it covers the heatbed cable entry and, at the same time, works as a dedicated holder/guide for the accelerometer cable . The result is exactly what I wanted: the…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 100% infill. I only recommend enabling supports in the middle of the underside, if they attach to the outside of the stand, it will be ugly after you remove it. I used…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of @Boogie created Heatbed cable cover: "A slightly simpler version of the heating bed cable cover with the possibility of tightening the screws for the contacts. For this cover you need a M3x12 screw to mount it." I just…
Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu
Coin with a cassette and crossbones engraved in it. Uses art from Wikimedia Commons .
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Replacement for the crumbling 33-year-old plastic cover of an otherwise good belt buckle in my camper van. My van is a 1990 Ford Econoline, but I think this particular belt buckle was an aftermarket part put in by the van conversion…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Alternative design for MK3S that is more rectangular. prints without supports 1hr 25min default fine settings with the part standing up like a tower thicker end down. You might get some stringing within the top section though it is on the…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Coin with a cassette and crossbones engraved in it. Uses art from PublicDomainVectors.org .
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Inspired by @DGA_122151 's phone stand , I modeled this to hold my iphone 11 pro max while a thunderbolt cable is connected
Wydruk około 2,50 €–3,06 € nettoWstępna wycena jednego wariantu
The Heatbed Cable on my MK3 was starting to sag and catch on the frame of the printer. So not wanting to pull it all apart I made a simple clip on support that does not require any tools or disassembly to fit. There is also a version for…
I designed this heatbed cable cover, because the ones available were designed to complex and too far off the original design. I needed an angled cable cover to reduce the length of the printer, so I can fit it inside an IKEA Platsa…
This is version 2 of my original SV06/SV06+ heatbed cable support design. This variation is a one-piece cable support and it's super easy to install. No tools are needed, and you do not have to remove any parts. Once mounted, insert the…
This V2 version includes 6 fully functional configurations that are ready to be imported into Orca without any hassle. These include the printer settings, 4 filament settings and the process settings. I've addressed the issue where some…
If you like this model, feel free to tip me at https://ko-fi.com/kcthechemist. If not no worries and enjoy! Easy to print and assemble Pokeballs. Assemble with superglue. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
Updates 31 may 2024. Fixed the issue with the wall thickness of the Ducts . ⚠ Disclaimer: before starting printing, make sure the extruder motor on your printer has side screw holes. To check this, you need to remove the stock extruder…
Catbus(My Neighbor Totoro)
This 3D printable seatbelt silencer clip is a handy solution for those times when you need to stop the constant seatbelt alarm in your car. Whether you’re driving around the parking lot or need to silence the alarm for any reason, this…
TL;DR: Print the top, print one of the two bottom parts, and optionally print the cable holder. This heatbed cable cover and holder is based on the original Prusa part. It keeps the exact dimensions for hardware, LED viewing window, cable…
NOTE: Models have been updated based on feedback. New models (V3) should have less side to side movement on the wheels and on the bed and slightly more range on the tilt of the bed. Also fixed a small issue with the front windshield…
This my take on Prusa i3 MK3S Heatbed Cable Cover. I remixed the angled version so my printer fits better to the Ikea Lack table enclosure. Print instructions Unassociated tags: heatbed cable cover, prusa heatbed cover Category: 3D…
Cable Chain Setup for Prusa Mini and Mini+ x-axis motor and the heatbed. Updated X-Axis chain can now mount on the front or side of the Aluminum extrusion! This has some other prints remixed in it. Prusa i3 MK3 Cable Chain Add-on (ALL…
Find the full code and documentation in the GitHub repository . There is a video walkthrough of the code, assembly, and basic use on my YouTube; I also recommend checking out the full series about the project if you want all the context…
Is your Model Y's rear seatbelt slipping all the way back making it impossible for you or your passengers to buckle in? Or maybe you have the nice white interior and are starting to see some marks where the belts are. Put this underneath…
BiQu H2 fanduct for a single 5015 fan Parts Needed: 2x M2.5 x 6 countersunk screws 2x M3 Nuts 2x M3 x 24 screws Printsettings: Layerhight: < 0.15mm Support Needed BiQu H2 fanduct for a Dual 5015 fan Parts Needed: 2x M2.5 x 6 countersunk…
This is a remix of my previous print: https://www.prusaprinters.org/prints/58873-angled-heatbed-cable-cover-remix NOTE: Recommended upgrade for LACK enclosure! IMPORTANT: For bottom side, use nylock nuts! That way, your HB cables are…
I got annoyed by not being able to either print of fit the 90º heat bed covers for MK3. So I took inspiration from the last model that I've tried and built my own version from scratch based on the original Prusa source files.
This is a modified version of motocoder's jig to suit the Sovol SV06, the length of cut silicon tube has been extended to 12mm from the 9mm of original jig to better match the Sovol SV06. Information about the original mod can be found…
Oh wow, it's the Catbus! Cutest pen holder ever. Perfect for a Ghibli fan.
This module is ideal for transporting loads of unusual shapes and sizes with the possibility to tie the load down using ropes. This module is the most simple one so far, with no bells and whistles, but it's an interesting piece of the…
De body smashed flat between youre pages, the only thing sticking out is the yellow smile 2 versions of the body with and without back layer (for strenght if needed) Printed in 0.12 hight 0.4 nozzle and a version for an orginal lego head…
This is a remix of remix of the model . But it should have all fixes to be perfect! OakMountain 's version is for heatbed with soldered cables (MK3?) so no chance for us with screwed cables to fit in. So hwalk did a prolonged version…
This is a seatbelt clip (dummy) to mute the seatbelt chime on certain seats. I created it for my dog in my Model 3. PLEASE NOTE: Do NOT use this for your seats when there are humans in them! Always put on your seatbelts! Print with 3…
this mode was made to try to reduce the VFA in combanation with a special belt i made for the K1 and the Bambulab printers … 8mm belt kindly refer to the description in the YT Video for details.
Seatbelt clip for stop beeping signalization. Its simple model
Minimalistic heatbed scraper for smooth PEI or textured steel sheets. I recommend printing in PETG for better durability. Works with all print settings and filaments. My print settings: PETG PrusaOrange 0.15mm Quality 15% Infill 2…
This is a remix of Jakeleeee's Prusa Mini 48deg heatbed connector cover, which stretches it to be about 3mm longer, to provide the additional clearance that I found was required on my Prusa Mini+ to allow the cables to exit without being…
Catbox ITX pc case design. 11.2L, 356mm 3.9 slot GPU, ATX PSU, 366x169x180mm (excluding protruding parts) Fully 3d printed; Easily editable to suit your size needs; Very rigid; Perfect for travelling in a backpack; Fully protected with…
This is a remix of T1miverse's design https://www.thingiverse.com/thing:2964580 NOTE: Outdated version!! Find the latest version here: https://www.prusaprinters.org/prints/100314-v2-of-angled-heatbed-cable-cover-remix ALSO NOTE:…
A flatbed truck for [ agepbiz ] haul and compatible with [ vandragon_de ] trucks . More trailers in progress Go visit [ agepbiz ] collection of tiny vehicules and [ vandragon_de ] tiny boats ! Settings : Printer : Prusa MK3S+ Layer :…
Should be a very easy print. No supports needed. PLA is fine but PETG or ASA for better durability is good.
This is a slightly modified version of the MK3s heatbed bottom cover. I added a rear support for the cables with a channel for a zip-tie. This does add an additional 9mm to the length of the part, so tight enclosure/wall spaces should be…
Tesla in Europe does not allow to disable rear seat occupation warning. It is due EU laws. I am riding with my 20kg dogs and they trigger warning beeps. I could use seatbelt, but seatbelt plug is huge and could be unconformable for dogs.…
V1 is a rought adaption to fit the mini+ at all. V2 is a theoretical better fitting version as 3D-File. I haven't printed it yet but its verified through the comments. Probably works for mini as well. I just own the mini+ to test it. Use…
The model was printed entirely in PLA, with a quality of 0.10 and 0.20, depending on the size of the part. The two rear ramps, held in place by a tie rod, can be lowered when unlocked, allowing an equally small vehicle to ascend... You…
I combined the FatBurner cover with the left and right base part to a single model by extending the bases 2 mm to the cover so that they overlap. I needed that because the extruder motor on my KE did not feature the mounting holes to…
This is a jig used to cut 9mm pieces of silicone tube for use with the Silicone Tube bed leveling mod for Prusa MK3 printers. The mod is described very well here: https://github.com/bbbenji/PMSBLM and here:…
I had some clearance issue with my fan duct: https://www.prusaprinters.org/prints/37368-prusa-mini-mosquito-fan-shroud so I decided to make a low profile version of the heatbed cover. I lowered the height from 4.8mm to 3.8mm to be in line…
This clips into the seat belt end to stop/ override the seat belt alarm. Can used when on game drives, birding or when have a inanimate load on the seat that triggers the alarm. Print Settings Printer Brand: Creality Printer: Ender 3…
Quick mod to store your extra heatbed plates and the lid. Not sure if it with work on a K1 max.
Adapter for the automatic arm from bmw e92 Print at 14%/15% scale. After some users tryed it, looks the most reliable.
Seatbelt cheater designed for a 2010 Ford Focus. For all legal purposes, or whatever, I'm not your mom. Category: Vehicles
There are a few different versions of this that all stick out substantially from the seatbelt socket. I didn't want my dogs to break the protruding bits. Fits nice and tight. The tab goes towards the button side. The long model is for the…
This is a DXF file that can be used to create (either by milling, cutting, or by using hand tools) a y-carriage compatible with the Prusa Mk3 Mk52 Heated Bed. This carriage will work on the Mk3, as well as the Wanhao Duplicator i3 and i3…
14mm tall, solder cover for the heated bed cables.... Use M3 cap screws and 2 M3 hex nuts. Printed in ABS .015 mm layers... Print instructions You will need to clip the screw cap ends from the wire, strip the insulation from the end of…
With this tool you can make meatballs faster and easier. I optimized to 220x220x250 print area. you can print it vertically (better surface) or horizontally (you have to rotate 45 degree to fit the 220x220 bed) Attention! Be careful over…
It's said necessity is the mother of invention. Dropping spacers or having the magnets grab the needle nose pliers while mounting the heatbed was frustrating. These tweezers made subsequent reassembly easy. With a long reach and secure…
A simple seatbelt clip to silence car warning sound. Please wear your seatbelt.
Studio Ghibli film My Neighbor Totoro is one of my favorites. With my Totoro Cookie Cutters already available here on Thingiverse, I felt it was time to add the "Catbus" to the collection. This is a very large cookie cutter, 150mm across.…
rollbar and flatbed for the ascent use the shocktower mounts to secure the bed, rollbar screws in the bed with 3 2.5x10 (reused screws from the ascent) supports screw in the rollbar with 2 2.5x10 (also reused screws)
2023-09-05 UPDATE Please consider using the "circuitboard-cable-holder" to gain some clearance between the heatbed cable and the extruder cable as they might collide/rub against each other on bigger prints! Also consider using this model:…
This is a 3D version of the NASA meatball logo, all the components are separate meshes so they can easily be set to different colors. I used a Bambu Lab p1p printer with the AMS to print this model, please use Bambu Studio to open the…
It's a very simple print, no special needs other than using supports from the build plate. I used: PETG 0.2 layer height Supports from build plate Print time: 43 mins (non hacked/tuned MK3S)
Want an overland style SCX10 iii Gladiator? You can now build one! The flat bed originally designed and printed for our SCX10 iii Gladiator Aussie Style Overland build . The flatbed comes with 2 different versions of an oversized, extra…
My parents got another car which missed the raising bulbs to keep the seatbelt plug high (you can grab it) So i made something that could help them Update: It is advised to make this thing from ABS or other high temp plastic. Because…
I needed a low-profile 90 degree cable cover for the Mk3 that would allow it to fit in an Ikea STUVA cabinet. I couldn't find one that worked and accommodated ring terminals, so I designed one, instead. Perfect fit using 90 deg. terminals…
Edit 1: Actually it is possible to change the heatbed layout directly within PrusaSlicer, so the below mentioned steps are not necessary anymore. Original-Description: Just a test - is it possible to change the foreground layout of the…
As mentioned in my original design, Pokeball Piggy Bank , this idea was heavily inspired by Flowalistik's series of piggy banks. I ended up making 3 more versions of the more well known Pokeballs. Great, Ultra , & Master . My goal for all…
Dear Friends, I just wanted to try 3th part heat bed plate from the Aliexpress. Of course i have identification problem. I tried 3d printed QR or barcodes but it didn't solve the identification problems. Then I bought UV resisted plastic…
It's a modifified Taurus cooling duct to be used with a voolcano heatblock and nozzle. I've also made heatbreak fan mode that uses stock 4010 fan (it's lighter than the stock setup). If you print from ASA/ABS remember to scale model for…
You ever had a problem that seatbelt is scratching your neck, or in case you have them going over your sensitive parts on the chest? This little thing will allow you to add a forth point of contact on your waist so that belt going over…
Introducing the Seatbelt Muter, a cleverly designed 3D solution that effectively silences the persistent and bothersome seatbelt alarm in your vehicle, especially when carrying a heavy bag. While this adapter is created to enhance your…
This is an easy-to-install version of Tesla Model Y's 2nd row seatbelt guide. You just need to snap it onto the head rest rods without the need to take them out (which isn't straightforward if you don't know how). I also found the…
There is not a way to disable the passenger seatbelt alarm. Pluging this in lets you “turn off” the alarm. This should not be used if a person is in the seat. I've included a few variations of the buckle. Beveled Pyramids Grids Spiky
I saw several versions of this cable clamp that reduces the overall functional depth of the Prusa printers to be able to fit inside a Lack enclosure. However, many of the existing versions were made prior to the switch to screw-terminal…
Made the following adjustments to the original remix: MK4: Added a hole to fix the nylon filament provided with the MK4. Opened up the hole for the cable bundle to provide more space. Cut a bit off the top where the thermistor wire enters…
I had already uploaded this thing to my MyMiniFactory account after I found the cover by tcurdt which had inspired me to design this cable cover to begin with. So even though this is not technically a remix, credit where credit is due for…
A wide assortment of fixed & folding stocks & braces for picatinny and AK mounts. Detailed instructions located in the “Other” files download.
Tired of struggling with seatbelt buckles that lay flat or disappear into the seat? This minimalist, high-efficiency stabilizer is specifically designed for rear car seats where buckles tend to flop over, making it difficult for…
This model is compatible with the lego system.
this requires a handful of m2.3 or 2.6 screws of varying length and 4 608 bearings (that's the size that most fidget spinners have) I also recommend using 4 49.5x14 lego tires but if you use the 20 mm rims you can print the tires from…
I've downloaded @Mecky1963 's version of the Mk3 support, remodeled it to be more robust, and tested it on my Mk4. When printed in PLA, it fits perfectly. However, PETG tends to be a bit loose. I achieved a good fit by using electrical…
Vincent has a far better solution to this problem here: https://www.printables.com/model/536937 If you would still like to use my version then read on. I done this, because I couldn’t find a cover that would work with the new bottom…
